Going to be a big weekend for the babies! Getting transplanted into 5 gals and getting the scrog put in! Getting ready for flower hopefully by next week! Also need to grab cuttings from each baby!

Servus Moin! Die Permanent Melon wurde diese Woche entlaubt und gelollipoppt. Der Stretch ist wieder mega krass gewesen.

No much to do this week just keep do lst for bigger yield

The flowering stretch seems to have slowed down and most of the growth is going into the buds now. The buds are forming up into long colas, and trichomes are forming up to frost the buds a little bit. One of the buds in the middle of the canopy grew into the light on f26 and got a little bit burnt. Otherwise coming along well and getting pretty smelly when touched. I trimmed off some of the lower branches towards the end of the week, and will probably be trimming more off on res cleaning day.

Hello Diary. Mimosa Auto has entered the first week of flowering, at least as far as Mimosa # 1 is concerned, given that Mimosa # 2 is a few days behind. Mimosa # 1 has grown 80 cm which worries me a bit, I hope it won’t grow too much in height anymore. The plant is quite stretched, and the distance between the branches is longer. This is not the case with Mimos # 2, it is the complete opposite. A small bush, full of large leaves. So on the 28th day I did a defoliation on both plants, plus the Sherbet Queen with whom they share the “Farm”. I removed the leaves and branches at the bottom of the stem, now the air flow through the plants is much better. Mimosa # 1 is very nicely shaped with a solid elongated stem, and the flowers began to form at the ends of the branches. For Mimosa # 2, I used Bending clips, small plastic devices for bending branches. We'll see what happens. Watering has become more frequent, every two days I water with about 2 liters of water. This week I added only one Easy Bloom Booster tablet to stimulate flowering and I adjusted the p.H to a value around 6.3 and at one watering I added CalMg preventively. The conditions on the Farm are in line with the summer months. The temperature is slightly higher, 28 degrees and the humidity is around 50%. It is expected that the temperature will increase in the coming time, considering the temperatures during the summer. I also changed the light mode, I put 4 hours of darkness and 20 hours of light. Both plants look really good, the leaves are a healthy dark green color and for now everything seems to be going as it should. Mimosa Auto # 1 - 80 cm Mimosa Auto # 2 - 45 cm Here’s what it looked like last week. 08/06/2021 - Day 24. Watering. I put one Easy Bloom Booster tablet in 6 liters of water and lowered the pH to 6.5. With that, I evenly watered all three plants that are on the “Farm”. Since the last watering was three days ago, the branches and leaves were very droopy which is an indication that they were very very thirsty. Temp / Humidity on the farm - 27.5 degrees and 45% humidity. 10/06/2021 - Day 26. Watering. I prepared 7 lit, lowered the p.H to 6.2 and did not add any other nutrients. 12/06/2021 - Day 28. End of the fourth week. I did defoliation on all three plants and put bending clips on Mimosa # 2. I think it will respond very well. I photographed the plants, measured the height and then watered them. This time I added 1.5ml / lit of CalMg preventively. That’s it for this week, see you soon.

Day 71, 29th of November 2021: Here we gonthe first day of the week 5th of flowering! Nice group like the different "personalities" and "styles". Hopefully not much left I guess 3 weeks and we will be very close to the end :) Let's go then Happy Growing Guys! The only changes I made is the ventilation and the extraction fan is off at the same time with the lamp so only switches on when the lamp does. So this is the set up and and operation schedule now: ViparSpectra XS2000 is on full power which is 240W so 100% capacity. Ventilation: As I mentioned it is off when the lamp is off so 12 hours. When the lamp is on it switches on in every hour and off for one hour. The extraction fan is on 12 hours when the lamp is, and then it takes a rest with the lap together lol ;) Watering pretty much remains the same. Humidity quite is approx 50%, temperature as well approx 26-27 Celsius. Fertilization remains the same since last week, the BioBizz family raised up to be 2ml/L each so it is like 2ml/L of BioGrow, 2ml/L of BioBloom, 2ml/L of TopMax... see the ratio above. The schedule of the fertilization has not changed happnes 2x a week except epsom salt just 1x a week.

Week 2: The Growth Phase Begins The germination phase is officially behind us, and it’s time to kick off the vegetative growth phase. I’ve uploaded a video that showcases the entire start of this grow diary, from germination to where we are now. 🌱📹 Be sure to check it out for a full recap! This week marks a critical step in the journey: Pheno Selection. I’ll carefully evaluate the three seedlings and choose the one that will move forward in this competition. So far, the plants are neck and neck, but slight differences are starting to emerge. By the end of the week, the strongest contender will take center stage. In addition to the video, I’ll be sharing photos of the seedlings as they settle into their new phase of life. Stay tuned for updates on their progress and my final decision. dein-onlineheadshop.de/ Use my referral code 420Shop at checkout to get a discount on your purchase. By using this code, you also support me, as I receive a small reward for each use. Thank you for your support!

Week 4 Update: Plant Growth: Noticed some plants lagging behind by 5-9 days, so I've been focusing on giving extra care to these ones. Implemented Low Stress Training (LST) on the stronger plants, particularly the Gorilla Glue and Gelato varieties, to encourage more even growth. Weather has been a mixed bag – occasional bursts of sunlight, but mostly rainy days. To compensate, I've set up a makeshift box with LED lights to ensure the plants get consistent light exposure. Nutrient Management: Adjusted feeding schedule to once every 2-3 days to provide a balanced mix of nutrients. Using a combination of guano, worm tea, and Grow NPK Autogrow mix to feed the plants, which seems to be working well so far. Considering adding Cal-Mag to the mix to ensure the plants are getting all the nutrients they need for healthy growth. Observations: Despite my efforts, I can't shake the feeling that some of the plants might be experiencing slower growth than expected. It's a bit frustrating, but I'm staying patient and hopeful that they'll catch up soon. Looking Ahead: As I prepare for the next batch of seeds, I'm already thinking about the lessons I've learned from this experience and how I can apply them to future grows. Despite the challenges, I'm feeling optimistic about the future and looking forward to seeing how these plants continue to develop in the coming weeks.

Ambers came in quickly overnight. So i decided to chop her. She looks good and smells great. A fresh sweet lemony scent. Overal happy with how she turned out. Cant wait to smoke her. 4/4: all trimmed and in grove bags.

These were left in soil outside and forgot about , luckily my wife watered them as they were in the pollytunnel, I left one plant outside but after 6 weeks I brought brought the rest inside to finish them. They were in small pots but still produced 20-30 g each , I'd say 25g average plus the trim. If your after easy to grow plants with a nice taste these are them.

A great week for the sherberts. They have been topped and pinned and are growing out great. Always praying always happy. I wish my kids were like these two!. No dramas to report. They seem to like any enviroment they have been subjected to in order to keep other plants in the grow space happy. They take the cold just fine. they love the warm also. Only thing i found is they had issue sooner then others with RH over 70% ( i was running high RH to fix my Chibas) #1 has bee cleared of nodes 1 and 2 and will have another topping in 3 days or so. #2 i plan to grow out node 1 cut 2 and top 3.. Giving 12 colas in total after final topping. Started feeding some grow to them at an EC of 1.25. I was planning to repot but they seem okay atm. Maybe next week. I also dropped 2 hrs off the light scehdule so they are running on an 18/6 from 20/4. Added a little vid of the grow room ATM😅👍 Thanks for stopping by. stay safe.. Grow well.

things are still on the go..Looking at the tricomes the are still clear with hints of cloudy.. Coming along pretty well. Im just watering with plain water now and just enough for a light runoff. Ec is low already and I don't think I can get it to anything less. Just doing routine maintenence this week. There has been no change in the colour of the leaves and this is the 11th day of. plain water.. Its all a waiting game.. I also changed the light schedule to a 11-13...... its supposed to help in trichome ripening... I hope. 😀 The vanilla Kush looks ready but I'm not sure. If anyone has an opinion on how much longer please share

Je lui donne 2 litres d’eau par jour

Starts slow then bursts into flowering and really packs on the weight the last week or two. Last run I chopped at their reccomended 9 weeks—I’d say that’s about 2-3 weeks short of what you really need to get the full potential of this particular strain. I notice the buds have developed substantially more with the extra time and without losing trichromatic potency. At just about 12 weeks this time she is mostly 50/50 cloudy amber. Last time was mostly cloudy so I’m hoping this time it’s a bit more couchlocky. I’ll report back with photos and a smoke report after the dry and cure.

ALL THE PHOTOPERIODS ARE IN THE 8X8 NOW. DID SOME MAJOR DEFOLIATION BECAUSE THEY ARE TOO BIG NOW. THEY ARE SWITCHED TO FLOWER AND THE STRIVE NUTRIENTS IS INSANE.. BEST FERTILIZER PRODUCTS EVER MADE. I USED IT 4 TIMES IN 13 DAYS AT FULL STRENGTH AND THERE IS NO NUTRIENT BURN AT ALL AND THEY EXPLODED. AND I HAD A FEW THAT WERE TURNING YELLOW, I THOUGHT IT WAS ROOTBOUND OR CALMAG DEFICIENCY BUT THE STRIVE NUTRIENTS BROUGHT THEM BACK AND THEY ARE SUPER HEALTHY AGAIN.... ATTENTION GROWERS:::::: YOU MUST TRY STRIVE NUTRIENTS. BY FAR THE BEST FERTILIZER PRODUCTS EVER.. I PROMISE YOU THAT AND IF YOU USE IT YOU WILL NEVER USE ANYTHING ELSE FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA (NEW) STRIVE NUTRIENTS 💪 Thanks for taking the time to read and check out my diary🤜🤛 FC-E6500 LED GROW LIGHT: FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective when compared to same style type lights. Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space. Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliverSuperior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat. save 50% hydro than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space. Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD the FC-E6500 LED grow lamp enables cultivators to produce BIG FAT Dense Buds, perfect for full-cycle hydroponic, soil, grow tent/grow room. Dimmable Commercial Grow Light: Cost-efficient, easy dimming & daisy chain With a max up to 20 lights, IP65 Waterproof, master light easily controls the rest. Perfect for commercial & home horticulture. FC4800 LED GROW LIGHT: GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! TSW2000 LED GROW LIGHT: INCREASE YIELD AND CROP QUALITY WITH MARS HYDRO LED GROW LIGHTS: NEWEST SMD LED technology provides the highest PAR/LUMEN output (1122umol@18") and can make you get 30% higher yield compared to OLD blurple led lights.  Max 2.5g yield per wattage and achieve maximum quality and quantity, much better than traditional HPS grow systems LOW ENERGY CONSUMPTION LED GROW LIGHT: Consuming only 300W true output with 684 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 3.5x3.5ft bloom stage, 4x4ft veg stage. Over 90% light energy can be absorbed by plants, it will have higher intensity in a MARS HYDRO grow tent with diamond design mylar, or by crossing over using multiple TSW2000 HIGH EFFICIENCY FULL SPECTRUM INDOOR GROW: 3000K 5000K and IR 660nm 760nm RED, makes it close to natural light, highly engineered to provide improved growing performance for plants at all stages of growing, rapid plant response from seed to flower; Uniform and wide-beam light distribution for your plant's optimal growth 8x8 1680D GROW TENT The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍

Her green still not were i want so i am keeping the nutrispray for a few days more at least until i like the colors better, apart from that she is growing great actually, wen looking at last week defoliation and now , i mean lol Sorry so short update i will keep updating among this week <3 <3 <3 Decided to connect my spider-farmer to increase my PPFD, i love this MARSHYDRO TSW2000 but in my humble opinion a 4x4 needs a bit more PPFD Power wen in flower mode bringing up my average PPFD to 1000 umol/m2/s lets see if she likes the idea or not. And like i suspected she did like more light and the color is changing bringing her green colors back to normal, did a leaf inspection just in case and posted some photos of my under leaf microscopic view, all good by the way lol , with this meaning that next week i will provably stop Nutrispray since i don't like so very much to apply any type of foliar during flower. And As i suspected i have an bug infection lol freaking trips found them way in to my closets, them a i dont know if mites, but i have something in this closet that webs and i cant find it RRR, i guess its part of the game, just been long long long time since i encounter any situations like this, and that is why its happening, i got way to comfortable and lazy on my IPM. This is one of the reasons why is so important to checking in a microscopic way under leafs etc Im ordering a bunch of beneficial insects , traps etc and going in from all sides lol non so ever she is looking great, not the best color leafs i know , but she is moving fast and furious . I will keep you all posted as for what i am doing and how i will deal with this situation so stay tuned since this can go one way or the other lol <3 <3 <3 As always thank you all for stoping by, for checking my journey , for the love support and for it all, i am blessed and humble with you all. Just a reminder , all i grow is medicine for myself, for me and for my best friend with is me nothing to sell, so don’t even ask. 

All info and full product details can be find in can find @ https://ganjafarmer.com 

https://aptus-holland.com/ https://marshydro.eu/ #aptus #aptusplanttech #aptusgang #aptusfamily #aptustrueplantscience #inbalancewithnature #trueplantscience #Ganjafarmer #growerslove
 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚💚💚 More info and updates @ https://growdiaries.com/grower/dogdoctor 
https://instagram.com/dogdoctorofficial
 https://youtube.com/channel/UCR7ta4DKLFMg2xxTMr2cpIg
 💚💚💚Growers love to you all 💚💚💚

Everything on the readings seem well. Plant two seems to be having some kinda nutrition issue. I'm not sure what it is on the first set it leaves. Plant one is seeming to be super strong, healthy, and green. Gonna just keep watching the water levels and ph and keep on trucking.

10. week. Hopefully less than 4 to go. Grow continues to run smoothly as before. The only point that is stressful is the humidity some times but mostly only after watering and since I’m watching them plants every 2 hours anyway the build isn’t that large. I just needed to understand that these plants will increase their transpiration towards midday and then decline again. So when I see 60% at lunch I don’t have to panic as much. Ryu started to smell strongly when touching him but the smell when opening the tent is still moderate. However I’m looking forward to a very nice and efficient harvest.

Week 10 of flower, looking to chop next week. The trichomes are about 70/30 cloudy/amber. Doing a few days of darkness and really cold night temps to hopefully push out the colors and resin production here towards the end.

Pinned down and into a bigger 10ltr pot and it's new home under leds