Bravo, I am surprised by the fast buds 420, quality seems Both are 46 days old Gorilla Zkittlez Auto And Gorilla Cookies FF let's see what happens next week 🌲🌱💚🌵🌧️🌦️

Strain: Divine Seeds – Auto Candy Grow Type: Indoor Pot Size: 7 Gallon Medium: Peat Moss & Perlite Nutrient Line: Athena (Bloom) Week 5 Update She’s doing really well this week, showing healthy growth and strong flower development. Her buds are looking impressive for week two of flower stacking up nicely already. She’s handling her feedings perfectly with no signs of deficiencies or stress. Everything’s on track, and I’m hoping she continues to bulk up and fill out like this in the coming weeks. Feeding 1.7 L Athena Bloom nutrient mix (will raise gradually if needed). Indoor Climate Conditions Temperature: 18–23°C Humidity: 60–65% VPD: ~0.5–0.8 kPa See y’all next week!

Fed her some Guao this week. Her leaves are looking a little yellow which I assume I need a dose of nitrogen.

Week 8, the last feed! Defoliated to let more air flow and light penetrate down into the lowers of the plant. Bud's are insanely sticky, plant is covered in frost, the pics don't do it justice.

Not many to comment this week. The plant is develoving good and dense buds and the smell is increasing. I like how the flowers look. According to the breeder it should be ready in 9 weeks before germination, i think it will be more

Using 2 seeds in a luke warm water shotglass. Placing in cupboard to germinate. Day1: Nothing yet Day2: One of the seeds started to sprout. Showing it's sexy little tail. I'll monitor the growth in the next 24hrs and then decide whether she's ready for the sproutling pot or not. Day3: Tails were looking pretty good - forgot to take a photo :/ roughly 1cm for one of them, which is the one that I decided to plant. It really hurt when I chucked the other seed, but I really only need one plant. Soil mix for the sproutling: Coco Coir - 70%, Vermiculite - 15%, Perlite - 15%. I also added Greenhouse Feeding "BioGrow" and Mycorrhiza. The picture was taken from my RPi + Cam setup that will be taking 2 photos/min. I'll post the timelapse at the end of the day. Day4: Running the whole day in the tent with ventilation running minimally. Light only at 20%. No action, so I deleted all the pictures except for the last one taken before the lights went out. Day5: No activity above the soil level. Probably spent the whole day focusing on root growth. Day6: At around 09:20 I watered again and with this uncovered the first signs of life! The rest of the day was mostly uneventful - until the evening. Roughly 2hrs before lights-out she started to move. Day7: Things starting to look really good :)

I have to say, overall out of all 5 purple Lemonade seeds I’m not very happy with the results so far considering they was a little more pricey & the fact that I know how good these plants can turn out! Not sure if I just got some bad genetics or what’s up but pretty bummed about this run so far😅😅 hopefully things will start to look up! Thanks for following & happy growing friends!✌️🏼🌱 Day 24 - Decided to pull the smallest purple lemonade that wasn’t doing anything so I can go ahead and get something else going in it’s place! Watered the other ladies today. Day 25 - Ladies are still stretching like crazy!

Its time for more pk i am using Hesi phosphorus plus. Plants look like love it. Thank for watching lot of ❤️ from 🇲🇹

The 34 street seed Cookies had Lot’s of LST and training this week! The girls did very well overall after being topped, and have recovered very nicely. I also finished up my drying my last harvest, so after a cleanup session, my big tent was ready to go again! This week was pretty easy, just watching the girls and adjusting the ties to keep the side branching going. I like to come in regularly and bend and twist the shoots between my fingers encouraging healthier stems. While I’m in there I’ll adjust the wire ties a bit to keep things even. After 2-3 days with the tie downs on, I’ll take them off and let the plant recover. With the environment dialled in at 79 degrees and 63% RH, it’s giving me a VPD of 1.0-1.1 , great for optimal growth. 💪 I think I am going to split the girls up, 4 (2 of eachin the one tent, 2 in my small tent, both with a Scrog in place. I’ll be transplanting this weekend, It won’t be long before these girls are ready for flower, October is a busy month for me so I may wait until the beginning of November to switch to flower light timing. Happy Gardening 🇨🇦❤️🌱😎💨

Hey guys, update week 2 this week I decided to do a video update to change it up, I also didnt take the plants out of the plant this week just gave water. They are all happy and grow at a nice rate, still no fertilizer just water in Sonnenerde living soil, even though the size of them compared to the pot size makes me worry a bit. Lets see what the next week has in store as we continue this journey together. I have to say I like these genetics a lot, all making nice trichomes and developing a beautiful aroma, solid plants, not one of the 4 doing funky things. Solid genetics !

She´s smelling beautifully this week. Its pungent odor is getting stronger and buds are really starting to get covered by trichomes. Sticky af Day 73 - Feeding today. Will increase Atazyme by 1ml/L and gradually increase big bud up to 2ml/L (Today i fed 1,5ml/L Big Bud). Also will gradually increase Top-Max up to 4ml/L.(today i fed 1,5ml/L) Day 76 - Has been very hot these days. Today i arrived and soil was completely dry, but the plant was ok. She´s starting to show beautiful colors, lets see how this pheno flowers. :) I fed her today and just increased Top-Max from 1,5ml/L to 2. Day 77 - She is getting really colorfull and beautiful. Buds are growing great, i dont see any complaints from her. I am removing dying leafs to help light reach every bud. Has been very hot these days, at night aswell (≈22ºC).

How's it growing guys, this is my new Diary that I would like to share with the Grow Gang! 2 short videos just explaining the setup and showing the germination rate. My other 2 diaries were my 1st which I'm not doing a good job of filling it out properly but I will do a better job with this strain on keeping you guys updated. Also I have another diary coming up for my Auto Pineapple Crack which I will be putting up in a week. Any questions just ask guys. Happy Growing 👍🏾👊🏾🌱🌴💯

Was a good harvest wk. Think I pult about 5 others plants that drying week. And she held her smell from the start to the end of curing. No bushwhack smell (hay). And got some decent strong weed. Although not my favourite weed. In its own right for what it is. It is what it says. So, hence the 8 tars.

Hello everybody! This week will be the hardest one. I’ll have to work a lot inside the room, and even on GD to document all the changes. Last week I topped for the last time (in reality this happened the first day of this week), and finally stopped with high stress training. From now on, our attention will fall totally on ScrOG. Day 43: Topped the 4 colas at the extremities. Red blood came out from them (see the photos). Amazing! Sorry for the bad quality, but I got just the phone with me when I did the job. When I took the second photo (a few hours later), the plant had already sucked up all the lymph. You can still see the red blood by the way. Day 44: Set the timer to start with 12/12 from midnight of day 45. Day 45: SO MANY THINGS HAPPENED TODAY. Flowering started, baby! 🤩 Today, in the evening, I worked for about 4 hours to prepare the ScrOG environment. - Improved the LST before placing the grid. - Took some photos. - Removed the humidifier. - Since my LED panel has half of the blue lights broken (this happened three weeks ago), resulting in 100W less of total potency, I added 3 new lights pointing where the panel is broken (2x 36W led bulbs and 1x 30W COB led light). I uploaded a photo and a video to better understand what I’m talking about. I even tried changing the broken LED driver, but it didn’t work, so now I’ll have to wait until the end of this cycle to send it to maintenance. - Put 20gr of BatMagno (which is bat guano), 10gr of “Farina di Neem” (Neem Flour), and 50gr of Alghe, all of them over the soil. I’ll write something about these fertilizers at the end of the comment. - 4.5L of tap water (corrected to PH6.5), which gave zero runoff. Haha, she’s drinking like a camel. - Placed the grid. - Took a few photos. - Little defoliation. - Took all the other photos. - There we go! I preferred not to add the bloom fertilizer now because I’m a little worried about overfertilizing this baby. During veg, she showed me she doesn’t like nutrients, so I’m just listening to her requests. I’ll add the bloom one as soon as she seems hungry again. By the way she’s just 20cm tall (I’m so proud of this result) and the grid is located a few centimeters above her. Let’s see if I switched to 12/12 at the right time: I heard this strain usually stretches for about 6 weeks!!! 😱😱 Let’s talk about the ferts I placed on the surface of the soil. - BatGuano: it’s a mixture of organic fertilizers of natural origin and suitable to produce a high amount of organic nitrogen and phosphorus that can be assimilated at 100%. It’s a natural slow-release fertilizer for flowering: the raw materials used (guano, dried borlanda with ammonium salts, kieserite of natural origin, flagpole, meat meal, bone meal and dried poultry) are the result of a careful selection which ensures a low salinity and a gradual transfer of the elements. The phosphorus content in BatMagno (being organic) does not undergo insolubilization. - Alghe: they are a portentose substrate activator made of a mixture of algae of the species Ascophillum, Fucales and Laminariales, obtained through a process of dehydration and grinding without the use of any chemical substance. They can be used during the preparation of the soil, and increase and strengthen the formation of the root system, mobilize the nutrients in the soil, reinvigorate the plants, protecting them from adverse weather conditions, help plants to overcome stress conditions and improve the quantity and quality of production. All of this is possible thanks to the presence of betaine, cytokinins, vitamins, auxins and alginates polysaccharides. - Farina di Neem (Neem Flour): it’s a vegetable product based on Neem seeds, obtained from the extraction of Neem Oil through a process of cold-squizzing out, which increases crops, improving both growth and flowering, as well as strengthening the roots of the plants. The Neem Flour is mixed with nitrogen fertilizers, that slow down the conversion and leaching of nitrogen. Repeated interventions improve the endogenous resistance of plants to pathogens, creating an unsuitable environment for the development of insects and cryptogams. Due to the presence of important trace elements for plant life, it prevents imbalances and nutritional disorders. It also protects plants from Nematodes, ants, insects and soil larvae. Let’s say Alghe is the most smelly product. My room now smells like seaweed! I need to figure out how to give her water now that the grid is on. I think I’ll plug a 2m pipe at the end of my watering can. That’s the most easy and cheap way to fix this problem. I just need to find the right size of the pipe. I’ll show you my solution next week.

Finally able to water again this week. Got the humidity down to 55%. They responded very well to the feed, noticed a big change within 24hrs. They're all looking very strong.

Apologies for not updating last week, I have just been really busy! These last couple of weeks have been great - her growth is coming along very well. There are no signs of any deficiencies as of yet, what is your opinion! In regards to defoliating and lollipopping - what growth would you suggest I get rid off?

04/05/2025 - 84 day Finally harvested😇 both strains smells like a mix of tropical skittles also if they're quite different, Flushed 2 week ago then just watering, very happy with my harvest, waiting summer time for enjoy it, harvest week for dried buds pics in three weeks or one month.

MrJones VIPARSPECTRA XS1000 LED 📜 SUMMARY - I have been given the opportunity to run the next generation of LED lights by VIPERSPECTAR, the XS1000! I set up a Stealth Cabnient and moved 3 Cream Manderain Auto XL.s under these lights, the cabinet set up is automated with WIFI light controllers, and INKBIRD Temperature and Humidity Controllers, I am very excited about this opportunity! Specs and Discount Codes Listed Below. 🔹🔹🔹🔹🔹🔹WEEKLY GOALS 🔹🔹🔹🔹🔹🔹 🌞Environment - 80F and 55%Humidity - using Humidfyer as needed. 💧 Feeding - Feeding with FOOP Canna Organic Nutrient Line 🍃Training / Super Cropped - and put 2 plants into a training hoop. 🕷️ IPM - Will be using Green Cleaner" 1 OZ per Gallon, and CannControl from Mammoth alternating between product each month for Integrated Pest Management. 💡 Vegetation & Flower (new) Viparspectra XS-1000 Release on March 15th. 🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹 📜 Week 10 and the buds continue to get bigger and fatter, the entire run is mostly on autopiolt, the tops of the plants are to close the lights, but not much I can do - I may move the lights and the plants over to my closet since I harvested the plants out of them today. 🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹 ▶️Monday 04.26.21 / Feeding about 20 ounces ▶️Tuesday 04.27.21 / Feeding about 20 ounces ▶️Wednesday 04.22821/ Feeding about 20 ounces ▶️Thursday 04.29.21 / Feeding about 20 ounces ▶️Friday 04.30.21 / Feeding about 20 ounces ▶️Saturday 05.01.21 / Feeding about 20 ounces ▶️Sunday 05.02.21 / Feeding about 20 ounces not much going on just the buds are fattening up! 🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹 VIPARSPECTRA XS1000 LED 🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹 Amazon US: XS1000 10% off: in10MrJones http://yx-8.cn/0y-6 XS1500 5% off: in15MrJones http://yx-8.cn/0yA XS2000 5% off: in20MrJones http://yx-8.cn/0y2Y XS4000 5% off: in40MrJones http://yx-8.cn/0y5k Amazon Canada XS1000 10% off it10MrJones https://amzn.to/38udUVe XS1500 5% off: it15MrJones https://amzn.to/3esVUyr XS2000 5% off: it20MrJones https://amzn.to/3l5zAfg XS4000 5% off: it40MrJones https://amzn.to/3l7k5Uj

Still forming her delicious buds had a lot of heat problems can’t seem to keep them down below 34 reaching 36c highest! 😮 I’m trying different things everyday but I think if I don’t fit ridge vents or tile vents I’ll be having more dramas with this heat! Unless typical UK gives us rain then I’ll be happy lol I’ve added some examples of my heats in the tents the blue one (blue illuminate) is the bananan glue the first yellow one is the fast flowers second is the autos! I have 2 coolers an extraction fan and another fan to blow the heat towards the extractor but still can’t bring it down! I think I’ll go back to my old way until the summer passes on the next ones which are in germ btw! Looking to rotate a harvest every 4 weeks from when I harvest the autos! Wish me luck please buddies the struggle is real!