Recommended
Likes
Comments
Share
Week 5 of flower and seed production for all these plants has started in earnest. We cleaned up the tent somewhat and took down all the males after having done their job. Alls left is to wait for finish now. The nute deficiency appears to have corrected itself now that we’ve balanced out the ratios a little more. The WPM is no match for the sodium bicarbonate but still gonna have to keep on top of that to the end of the grow. Full fumigation of the grow spaces will be required - multi-day process I am not looking forward to. Time cleaning is time not growing, sadly. We’re coasting to the finish now but should still have some decent updates on our super secret seed harvesting method once they’ve fully matured😉👍. Hope everyone’s well and grow’n that straight 🔥. Background Fingers crossed that these Spicy Bitch regs provide at least one male so that we can back build some stock of it. In the event that does take place we’ve got a single clone of each strain from the previous pollen chuck to sit in the tent with them so they can make babies for the next few months. The whole point of the last year was to start making some foundational genetics for a third generational cross we could call our own. If you’ve been following along than you’ll know that it’s been anything but easy. Our previous pollen picks didn’t pan out at all so we’re back to the drawing board with a new option from ExoticSeeds. This’ll be a 10 plant run with 5 regs and 6 strains for pollination including the strain itself. We’re running in a 2x4 MarsHydro grow tent all powered by a Mars Sp6500. That’s a little more than 600w packed into half the recommended footprint😳. Why? you ask - because we like our buds big and overcompensatory😂. Really, I’m just of the mind that we can pack more light into this space than recommended and get much better results. The math doesn’t lie. At least not as long as I wasn’t high when using the calculator again….. Many thanks to @MarsHydroLED for the opportunity to test run the equipment👊. In addition, we’ve also moved to a new nutrient system - Druid Nutrients out of the Netherlands. They don’t really have a presence on GD yet but you’ll be hearing about them very soon I’m sure. The beauty of this system is that it’s literally a 1 (one) component system for the entirety of the plants grow cycle. It really has changed the game in terms of ease of feeding and maintenance. It’s also very versatile and seems to provide everything needed across multiple different strains in the same ratios. Keep your eyes peeled for these folks. Pretty much a guarantee that they absolutely blow up once more people know about them👍👌😎. Strain Background Spicy Bitch: predominantly sativa, heavy yielder with a daytime kinda trip profile. It’s a cross of Queen Mother and a Pre-2000 AK47. We’ll pull what pollen we can and hope to have a female run out a larger supply of seed for the future. Many thanks to @Exoticseeds for the chance to give these beans a go👍👊. Pollination Strains: Holy Surfer S1 - this is one of the focal points for this cycle. A fellow growmie was kind enough to ship over some S1 genetics I took an interest in. The only ask back was that if I did cross it to send a few his way for testing👍. Shoutout and cheers to @blendmedmedman. Hoping to have something back to ya in short order. For full details on this alluring hybrid option check my buddies link at seedfinder - https://en.seedfinder.eu/strain-info/Holy_Surfer/Smiling_Tiger/ Northern Lights - this came from a particularly interesting batch of seeds that have shown a very dependable variegation trait. It’s a compact and squat plant requiring very little maintenance. Typical for the strain really. It’s been chosen as an option to potentially mellow out the high , shorten the stature of the resulting hybrid and inject it with some of that mellow indica effect. Boogie Nights - total shot in the dark. Still haven’t even tried the strain myself yet but it was available at the right time and interesting enough to make a salad with. Big thanks to AMS who’ve been nothing short of an excellent seedbank to collaborate with. Expect similar growth characteristics to that of the Northern Lights. Better resilience however. Blueberry - this particular clone is from extremely strong stock. Spliff seeds broke the mold with this strain. She’s lower maintenance than the NL, more resilient than anything else we’ve got on the menu and the terp. Profile on this girl is out of this world. If we can bring any of these qualities to the cross, then it could be magic👌. White Widow - garrghh, I just can’t get away from this particular plant. Again, still haven’t even tested the buds yet and all I can say is that the growth characteristics are extremely vigorous and desirable. This plant is one of 3 unicorns that I have yet to tame due to a combo of extremely bad luck and circumstance. All told, it’s still the same story: a VERY experimental breeding project designed to shotgun a broad swath of genetics against a reliable and dependable Breeder who’s put out proven fire 🔥🤟😎👍.
Likes
3
Share
This week growth. It's been growing really well and the smell has completely changed to a dank candy.
Likes
16
Share
struggled a lil bit with humidity and temps but things were still okay
Likes
33
Share
Hemos empezado la 3° semana bastante bien, sigue su curso y se la ve muy sana y con mucha fuerza. Esta creciendo poco a poco pero espero que pegue el estirón de un momento a otro 💪🏻 Esta semana he añadido las pastillas de RQS para darle los nutrientes necesarios para la vegetación y que coja la fuerza que necesita. He ajustado el pH a 6 y hemos subido la EC a 0.8 (400PPM) La temperatura del agua esta en 26°C Iremos viendo el crecimiento poco a poco y espero que todo siga como hasta ahora 💪 MUCHO HUMO 🔥
Likes
6
Share
@Haoss
Follow
The beautiful girl has started growing right now. I haven't fertilized her yet. I've done some topping and removed the small leaves, She's feeling great 💚
Likes
66
Share
58 Days have passed in flower. Cheese left, Gorilla Girl right. The "Just water no pH" experiment has failed me around week 5 of flower. I have not done anything to keep the soil biology alive so thats probably the issue. Its all good though, it was fun while it lasted and definitely worth a try. I have let the soil dry as much as possible and then i watered in a tablespoon molasses per gallon water. pH'd to 6.6. I just need atleast 3-7 more days of flower and hopefuly the buds will mature a little more. I took a snip of the bottom leafs to check for trichomes maturity, those are the weakest of trichomes on the plants. ---1st time growing with FLO - Florian Living Organics.--- They claim that there is no need to pH when watering and that their living fertilizer is the only thing that i will need throughout the whole grow so i only need to mix with soil and just water with plain water. If this stuff works then it can simplify my future grows ALOT! Happy growing. 😎
Likes
27
Share
Ladies and Gentlemen we are back!! This project started last Sunday an Germination week was a success for these Purple punch’s an Forbiddin Runtz from Fastbuds 😍! I went with my paper towel method, sprayed down paper towel with pure water, folded it up inside sandwich bag un seeled in a dark cupboard. Checked everyday to make sure paper towel was still moist and on 3rd day we had all 6 pop open! I planted them Wednesday and all 6 popped up in soil on Friday in my Ac Infinity pots using Fox Farms Happy Frog soil! Tomorrow we will give them a small dose of nutrients, will be doing nutes on Monday, Wednesday and Fridays only rest get pure water! Well y’all let’s have another great week , keep them eyes peeled for next weeks photos an pics !!
Likes
24
Share
Flowering day 34 since time change to 12/12 h. Hey guys :-) The buds have developed incredibly nicely this week. The smell is getting more and more extreme :-) . The growth has slowly stopped as the full energy goes into the production of the buds. Watering was done twice this week, each time with 1.2 l (nutrients see table above) They were individually inspected and checked for their health. Osmosis water for the coming week was refilled in a 100 l tank 👍. Have fun reading the diary and stay healthy 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : Clearwater Seeds Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.5 MadeInGermany
Likes
9
Share
@Xabii
Follow
This is the start of my second grow and also second Northern Light Auto from RQS, the goal is to hit #1 in g/plant for that Strain. I didn't take as many notes as in the last grow but there are timelapses, some photos and metrics from probes. Started with 3 Seeds and then picked the 2 strongest. The System is a NFT System but due to the size of the tube and root growths the solution with submerge the roots ~70% later on. To combat that I use 3 small 1.5w air pumps, these are super silent, if one dies I got 2 more running and to be honest air pumps used in DWC systems are often oversized and rely on Broscience. In my Salad/Herb NFT Systems I don't use any air pumps and the plants are just fine and grow great. This time I added sprinklers to humidify the air inside the tube, slightly moisturize the Rockwool and speed up root growths. Spoiler: Was a great success :) The ratios for the fertilizers are not accurate in the following weeks, I have a 120l Reservoir that is filled 90-110l I top it up once or twice a week to sustain PH and EC, if you want to copy it just go by the EC and use the B (Calcinit) and A (Kristalon Blue/Orange) 50/50. I mix the solution myself with dry salts that I bought in bulk 25kg bags. 4l Water(distilled/RO preferably, tap water is OK) + 1kg salts mixes just fine, keep the solution dark and cool and it will stay stable for months. Dry salts don't expire if kept cool and dry so only mix what you need and keep the rest stored as dry salts. 40ml A + 40ml B is about 2EC and 6PH with my tap water, very similar to Canna, Plagron etc. isn't it? just with the twist that I pay ~20% of the known brands. P2O5, K2O, MgO etc. are always the same as long as they are produced by a good manufacturer, Yara is a world leader in fertilizer production just not to be found in you general hydroponics or hardware store. Any other known manufacturer is fine as well, pick the cheapest. Check Hoocho on Youtube to see a guide on how to mix your own solutions, it ain't that difficult trust me. From week 5 onwards I also use Oxygen granulate (KMPS, CAS-70693-62-8, 2KHSO₅ * KHSO₄ * K₂SO₄) if you want to use this check pool supply stores and buy the cheapest. Keep this one dry, cool and dark. I used a old pill bottle to keep some ready to go because it came in a 1kg container and I only need 2-4g per serving + the bottle has a silica pack in the cap. From week 6 onwards I used Haifa Grow Clean for Details check week 6, I use this one as dry salts and add it directly to the tank, it does not interact in a bad way with the solution. For meassurements I use a generic 8in1 Meter "PH-W218" branded by many companies, as usual, check stores and buy the cheapest. (Check week 1 for an image of it) I got mine from Aliexpress for ~70€ it uses the Tuya app so you can always check your metrics and export them aswell. The PH and EC probe are accurate and are giving me stable results for almost 1 year now, I re calibrate the PH probe once in a while and it is tops 0.15 off after a month, always double check your results with PH drops/paper. Bluelab is... A LOT more expensive for less value. For the timelapses I use 2 Tappo C210 2k Cameras, these have the ability to make the stream available trough RTSP so that you can access it trough a link in a browser and that way I snap a Screenshot with a raspberry pi :) after that I just render it with blender to a timelapse. Sadly they seem to have trouble with the bright lights and I get image trouble over the course of the day, if you have a recommendation hit me up :) The script I use to take the Images: #!/bin/bash ########################################################################################################################################## ##### A script to save images from a rtsp capeable IP cam, Tapo C210 (2k image quality) for example in my case. ##### Images are saved in a directory named "2024_01_01" for example, it uses the "date" command within the system it is running on. ##### You can then render the images to a timelapse, I use blender for that. ########################################################################################################################################## RTSP_URL_LEFT="rtsp://:@:/stream1" #sets the variable for cam LEFT access RTSP_URL_RIGHT="rtsp://:@:/stream1" #sets the variable for cam RIGHT access while true; do TIMESTAMP=$(date +"%Y_%m_%d_%H_%M_%S") #sets the timestamp variable DIRECTORYLEFT=/$(date +"%Y_%m_%d") #sets the directory variable with current day for LEFT DIRECTORYRIGHT=/$(date +"%Y_%m_%d") #sets the directory variable with current day for RIGHT mkdir -p "${DIRECTORYLEFT}" #makes a directory for each day if it doesn't exist for LEFT mkdir -p "${DIRECTORYRIGHT}" #makes a directory for each day if it doesn't exist for RIGHT ffmpeg -y -i "${RTSP_URL_LEFT}" -frames:v 1 -vf "format=yuvj420p" "${DIRECTORYLEFT}/${TIMESTAMP}.jpg" #captures a frame from the RTSP stream and save it as a JPEG image for LEFT ffmpeg -y -i "${RTSP_URL_RIGHT}" -frames:v 1 -vf "format=yuvj420p" "${DIRECTORYRIGHT}/${TIMESTAMP}.jpg" #captures a frame from the RTSP stream and save it as a JPEG image for RIGHT ################################################################################################################################ ##### Waits for 180 seconds, change that depending on how precise you want the timelapse to be, less waiting = more images ################################################################################################################################ sleep 180 done Hope you like my diary, leave a comment and a like if you like it :)
Likes
72
Share
@Sider79
Follow
It was a small auto but also it was grown in a 2 gallon, Smells delicious, always issues with heat end of summer but i think it still did its thang . Really lime green covered in trics smelling like berry's 👍 I Will grow again for sure & recommend 👌 thanks Seedsman 😊 !!
Likes
18
Share
@Pokan187
Follow
Was on a 2 weeks vacation, just got back, found a lot of yellow leaves on the Runtz which is normal at this stage I think, te Sour Diesel is looking light green and the G13 is looking great and smelling marvelous. I will be adding some natural flowering mix
Likes
Comments
Share
Buenas a tod@s... Bueno otra semanita más para las niñas... Las frosty tooth... De momento va todo bien, eh tenido un "problemita" con la lámpara pero ya está solucionado, de momento todo en orden, las eh pasado a la maceta de 7 lt para q ya estén ahí, un buen sustrato y un poquitito de nutrientes para las raíces... A esta altura no podemos hacer mas q darles cariño y dedicación... De momento esto, luego más y mejor, a seguir trabajando duro... 💪🏻💪🏻 Buenos humos para tod@s... 😎⚕️💪🏻💪🏻 🇦🇷🤝🏻🇪🇦
Likes
12
Share
This soil is very good , a transplant is needed. It's seems as if it grows great in the sun..
Processing
Likes
Comments
Share
@Fergie
Follow
hey guys so a few weeks have gone by sorry been a few weeks but i wm upoeupoer busy with work at moment wnother month and iam on my holidays 😀new tent arrive also got myself 2x 1500watt cob led lights one of which is in new tent other is in with my photo strains and clones 😀 all looking fab coming to an end soon . Willl update again soon
Likes
7
Share
@Tony_Ista
Follow
An Tag 43 und Tag 48 wurden beiden Pflanzen nochmal großzügig entlaubt. Viele Leute sagen "Mach das bloß nicht" und viele Andere sagen "würde ich auf jeden Fall machen". Grade bei den beiden +Speed Auto´s, die sehr klein und buschig wachsen, hielt ich dies für förderlich. So konnte ich sowohl die Lichtmenge für die wichtigen Buds erhöhen als auch gegen Schimmel vorbeugen. Viele LST Schnüre konnte ich bereits entfernen und alles wächst ungefähr in gewünschten Bahnen. Bei der höher gewachsenen Pflanze mache ich mir etwa sorgen wegen den hellen Spitzen der Blätter. Ansonsten entwickeln sich alle 4 Pflanzen ohne weitere Probleme.