Most of this week I was away so the tent was on autopilot. When i got back i was pleased to see all 4 strains where still around the same on development with this one perhaps being slightly further on then the others. The Ams supreme is the smaller of the 2 AMS autos. She is starting to throw out some nice colours now. I'm confident this one is going to hit my 13 weeks scheduled for it, so not long left. Notes Day 64 nothing away Day 65 autofeed last weeks nutes Day 66 Got back, everything's fine Day 67 manually water Day 68 light strength from 75% to 87% PPFD was 458 Dli was 29.7 now its 544Ppfd 41.1Dli. Day 69 autofeed this weeks nutes Day 70 553Ppfd 35.3Dli Back in a week Take it easy.

Hello everyone 😎 Week 7 of flower for the Amnesia HazZzzze🤯 All the tops buds are ready✂️ 3 different pheno🤩 Purple : the smell is citrusy & earthy very strong!🍋 Green : tropical 🤤 it reminds me the Pablo Escobar ! Max 2 more weeks & finito ✔️

FW3 10/25/24.

This girl is currently in the darkness to speed up the process a bit. She's been flowering for over 63days already and white pistils dont seem to stop coming out. I think this is before of her strong sativa strain. Anyway, next week will be about her being harvested. I hope to get at least 8oz out of this girl. Let's see if i can do it.

Welcome to my Pablø Escøbar diary. In this diary: Seeds: sponsored by Ðivine Șeeds Media: Promix HP Nutrients: Advanced Nutrients, Diablo Nutrients. Light and Weather: Şun☀️and Mother Earth.🌎 ___________________________ Feeding: Mon 03Jun: 2L water not pH'd in bottom saucer only. Tue 04Jun: 2L water not pH'd in bottom saucer only. Wed 05Jun: 4L nutrients pH'd 6.5 Fri 07Jun: 2L water not pH'd in bottom saucer only. Mon 10Jun: 2 L water not pH'd in bottom saucer only. ___________________________ We had very warm weather and by the end of the week rain pouring. Did spray the girls with Safers insecticide after sunset for good measure after discovering spider mites nests on june 3rd. ___________________________ Thanks for stopping by, likes and comments are appreciated!👊🏻😎 Keep on growin! Keep on tokin!!! 😙💨💨💨💨💨

9/15 12AM MONDAY. HEAVY AMINO EXPERIMENT WAS GOOD. EC WAS 1.3 HIGH BUT WORKED, LITTLE BURNS BUT I DEIGNED THEM TO WORK UNDER THESE CONDITIONS. 9/16 1:30AM!!!!!! Analysis of Your Grow Progress Cookie Apple F1 Auto (Mid-Late Flower): Butter Frosting Resin: The thicker, smoother resin suggests peak terpene and flavonoid production, likely driven by your 200 mg/L phenylalanine and 125 mg/L glutathione from the heavy amino spray. The “butter” texture could indicate high myrcene or limonene, enhanced by FruitnFusion (0.5 mL/L) and Purpinator (0.5 mL/L) (‽web:5, ‽web:10). This is a sign of top-tier flavor and potency. Next: Monitor for overfeeding (minor tip burn persists)—consider diluting amino acids to 100–150 mg/L each in the next 2 L mix to sustain resin without stress.Conclusion The “butter frosting” resin on Cookie Apple F1, healthy yellow-green fusiform, and Blueberry KO’s pigmented cotyledons show your anthocyanin-glutathione-phenylalanine strategy is working—phenylalanine drives synthesis, glutathione ensures transport. Tweak amino acids to 100–150 mg/L to reduce tip burn.👍👍. 9/16 926am COOKIE APPLE LOOKS LIKE 3 STICKS OF BUTTER!!!!!! WOW!!! 9/163:45AM I BUILT A TIME MACHINE!!!!! GOING TO TELL THE GERMANS TO FIGHT HARDER👍 That is a practical effect...no computers no grok just AWESOMETASTIC ME!!!!! 9/17 3PM sorry it didn't work... :( 9/18 3:25AM Kitten Academy live stream, no commercials https://www.youtube.com/watch?v=r3YdBqqDLQk 9/18 11:45AM Mixed up Aminos first and separate and used 16 oz for foliar spray. Then mixed up: Root: 1.5 mL/L Connoisseur A & B Bloom, 0.25 mL/L CaliMagic, .5 mL/L Purpinator, .5 mL/L FloraNectar. Setria Glutathione: 150 mg/L = 300 mg (Brand: Emerald 250mg capsule.) TMG: 150 mg/L = 300 mg/L (Brand Nutricost) Phenylalanine: 150 mg/L = 300 mg/L. (Brand Nutricost) Proline: 150 mg/L = 300 mg/ (Brand Nutricost). 9/19 10:30AM EC 1.1 Foliar Spray pH 5.8 Phenylalanine: 250 mg/L Setria Glutathione: 250 mg/L Brand: Emerald 250mg capsule. ROOT: cut above in half and Root: 1.5 mL/L Connoisseur A & B Bloom, 0.25 mL/L CaliMagic, 1 mL/L Purpinator, 1 mL/L FloraNectar. 9/19 316PM BETTER THAN I COULD HAVE IMAGINED!!!!! THE SPRAY FOLLOWED BY ROOT A FEW HOURS LATER. RESIN IS GREAT, FLOWERS ARE FORMING JUST PERFECT. RESIN IS LIKE BUTTER VERY SOFT SMOOTH AND SMELLS BETTER THAN ANY OTHERS IVE DONE. THE SPRAY WAS USED ON 5 & 6 DAY OLD PHOTOPERIOD SEEDLINGS , AND 2 WEEK AUTOS, AND JUST SPROUTED SWISS CHARD, BASIL, AND A FEW OTHERS LIKE THAT WITH NO DAMAGE!!! IMAGIINE WHAT THIS COULD DO WITH CORN OR RICE AND WITH NITROGEN EFFICIENCY AT MAXIMUM. AMINOS MAN, WOW. IM SOFA KING AWESOME OR RE-TODD IT, WHICHEVER IS FUNNIER. 👽👍😎 9/20 CA1 sample, smells PERFECT &FRESH ALMOST LIKE SOME MAD AS HATTER FIGURED OUT A WAY TO INCREASE TERPENES THROUGH NOVEL AND PROBABLY BORDERLINE GENIUS, OR AT LEAST BORDERLINE SOMETHING WAYS.....THIS GUY MOTHERFUCKERS!!!!! 9/21 10AM Based on information for cannabis plants and the recommended dose for Setria Glutathione, the nitrogen content from 250 mg each of phenylalanine and Setria Glutathione is minimal compared to the required macro- and micro-nutrients for an autoflower plant in its 6th week of flowering. Here is an analysis of the nitrogen content and the role of these substances. Phenylalanine analysis Phenylalanine is an amino acid, and like all amino acids, it contains nitrogen. Formula: The chemical formula for phenylalanine is (C_{9}H_{11}NO_{2}).Molecular weight: The molar mass is approximately 165.19 g/mol.Nitrogen contribution: Each molecule contains one nitrogen atom. The atomic weight of nitrogen is 14.01 g/mol.Calculation:The percentage of nitrogen in phenylalanine is ((14.01/165.19)times 100approx 8.48%).The amount of nitrogen in a 250 mg dose of phenylalanine is (250text{ mg}times 0.0848approx 21.2text{ mg}). Setria Glutathione analysis Setria Glutathione is a reduced L-glutathione compound, which is a tripeptide composed of three amino acids: L-cysteine, L-glutamic acid, and glycine. Formula: The chemical formula is (C_{10}H_{17}N_{3}O_{6}S).Molecular weight: The molar mass is approximately 307.32 g/mol.Nitrogen contribution: Each molecule contains three nitrogen atoms.Calculation:The percentage of nitrogen in Setria Glutathione is (((3times 14.01)/307.32)times 100approx 13.68%).The amount of nitrogen in a 250 mg dose of Setria Glutathione is (250text{ mg}times 0.1368approx 34.2text{ mg}). Summary of total nitrogen The total nitrogen contributed by both supplements is: (21.2text{ mg (from phenylalanine)}+34.2text{ mg (from glutathione)}=55.4text{ mg N})When dissolved in 2 liters of water, this results in a concentration of (27.7text{ mg N per liter}). " 9/21

Saludos! 🙌 Completando la décima semana y cuarta semana de floración🌻 Esta semana la temperatura cayó bastante, estuvo alrededor de 8° y 15° por eso el panel led está tan bajo como se ve en las fotos. Dentro del grow la temperatura más baja fue 13° y creo que eso la está afectando un poco. Pero estoy feliz que está resistiendo bien 🙏 Buenos humos 🍃

This is the last week before harvest.

It's Day 54 Week 08 0f Flower For My 02 Kombucha Cream by atlasseed . And For My Snow White and SpliffStrawberry by Spliff Seeds Amsterdam . So Today I Started My Day By Checking My Tricomes On My 2 Kombucha Cream. The 02 Where Looking Fully Milky So My 02 Kombucha Cream Got Flushed TODAY with Some Flawless Finish by Advanced Nutrients . The 2 Received 80ml of Flawless Finish mix with 1OGallons Of Water Ph at 6.0. Tomorrow they will get Rinse off with ph balance water. Yesterday I watered my Snow White and SpliffStrawberry Ppm where down to 100ppm. All 4 Plants will get a nice ice bath in a few days. My plan is to check the Tricomes on the SpliffStrawberry In a few more days she was still Milky when I check her yesterday. I will chop her down next weekend. And the rest will get the chop at 30%Amber Tricomes. Happy Growing Growmies 🤘🏻

Hi Everyone ! Everything is ok. Plant are still healthy. specially the tank on the left, they drink 15L during this week and maybe less than 10L for the tank on the right Guess which one has a nice root system ? 🙏😉

Great strain for beginners, easy to grow don't require too much attention or special techniques . She will grow fast, gorgeous and smell very very strong, I didn't think I was going to be able to harvest more than an ounce (because this is my first time) but hey, I'm very happy with my 41G! The buds were skinny but dense in flavour, I wonder why the buds didn't get fat, its because of my LED panels, or genetics? Overall I recommend this strain for first time growers!

I think the flush helped, It had the run off after this feeding at 300 ppm so the back to back heavy feedings not a good idea, have some burned leaves and lost some time lapse days but they seem to be doing ok. got 4-5 more weeks till finish I think I will let them go as long as i can to get all the buds to develop. of the 4-5 weeks left I will feed lightly 2 more times and water in-between until the 2 weeks of flush. I really need a new light with white LEDs the color correction is all over the board. any recommendations for lights let me know. be safe.

Coming along nicely seems to take longer to bloom than most Autos maybe 11-13 weeks but looks like it will be worth it. Buds are gong to be many not sure how big they will be but looking like they will be huge.

All the photos are in the 8x8 now just a few autos in here now FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Привет друзья. Наше знакомства продолжается с новым сортом автоцветущих растений от Smail_Seeds сорт .TROPICANNA POISONZKITTLEZ XL AUTO Reg. Сегодня растению 97 дня. Шишки налились очень хорошо😀 Вы всё сами видите. Скоро будут феминизированные Сорт выводим сами. Смотри мой профиль, у нас всегда есть что то интересное. Не забудь поставить лайк❤️, если понравилась как прошла неделя И читайте наш TELEGRAM: https://t.me/smail_seeds #Smail_Seeds 😀

Day 1 Never grown before, but always liked plants. Especially plants like these 😊 Seeds came today. Only one will be grown for now (Bloody Skunk Auto). The seed was slightly scraped (purposefully), and then placed in distilled water. Seed sank to the bottom with a little push after 6 hours. Hopefully that's a good sign :) Seed was then taken and put into rooting medium. Currently lights are on 24/0 to warm the area surrounding the seed. Tomorrow temperature/humidity measurement will be set up. Day 2 Was able to measure the temperature. It's about 22 C. Natural humidity is a bit low in the area (35%), so a humidifier is being used occasionally to increase that. Seed has sprouted now (15 hrs after being put in the rooting medium), maybe in two days there will be some real growth 😊 Day 3 Root looks like it's off to a good start. Positioning seems a bit off though. Will keep an eye on it for the next couple of days. Day 4 There was a surprise waiting today 😁 Plant pushed through the piece of sponge at the top without a problem apparently. The light has been switched to a 125W 5500K CFL, for now without any reflector. A bit worried that this might be too strong, especially for a seedling. However there aren't other 5500K or higher Kelvin value lamps available, so going with this one for a couple of days. If there are problems, will go back to just a collection of 2700K bulbs and hope the plant survives haha. Got a heating pad, so now the temperature is being kept around a comfortable 73-76 F. Night temperatures should drop to around 66-68 F. Lighting schedule has been switched to a 20/4 schedule, to allow for better plant development. Will probably stay with this schedule for the first couple of weeks. Could also see the taproot poking out of the Root!t sponge. Not sure if that's going to bad for this root to be exposed to light at this stage. Once (if) the leaves start to get wider than the Root!t sponge the plant and sponge will be transplanted to a small 1 Liter pot. If the roots continue growing but the plant stays stunted then it will also be transplanted. Andddd....got nervous about the 125W lamp. Decided to switch it out for the previous lights (two LEDs, two CFLs, all at 2700K). Total lux value is about 10000 measured by the seedling. Seemed also like the seedling might have been craving some water, so gave it a few drops. It hadn't been watered since being planted. Hopefully not over-watering here... Day 5 Seedling has grown by another centimeter. Leaves haven't really changed that much. Nevertheless, decided to put the seedling in a slightly larger container. The cup was taken and filled with some potting soil (Compo Sana Anzuchterde) and the Root!t sponge put into that. Did this because the tap root was poking even further out of the sponge and didn't like that. Gave some more water, mainly in the lower section of the soil. Will not water again for a few days unless it seems really too dry. Don't want to over-water 😑 Day 6 Seedling doubled in height. Starting to get concerned about stretching. Read conflicting information about the optimal humidity for seedlings, but most seemed to say that less was better, and a humidity dome not necessary after sprouting. One source suggested that seedlings stretch when under a humidity dome. So that's been removed. Switched to the 125W lamp as well in case the seedling was stretching because of not enough light. Added a fan for a breeze to occasionally move the seedling...hopefully this will make the stem a bit sturdier. First set of leaves has begun to develop a bit more..but it seems a bit slow. Might just be being impatient 😄 Day 7 Not much has changed. Soil is getting to be dry enough where watering again should be ok. So that will be done tomorrow morning, with a small amount of BioBizz RootJuice.

using soil so im still only watering wit 30 ppm of only calmag since im using 0ppm ro water