Likes
Comments
Share
@Pearl
Follow
Mixing a ratio of 4ml start 5ml Katana / 1 litre water at PH of 6.2 Mix well and spray onto paper towels to soak, Fold paper towel in half & place seed inside & fold to cover so the seed is in darkness, Place damp paper towels with the seed inside a zip lock sandwich bag. I only had to wait 28 Hours and the seed had split She was planted into her 1st pot last night. Happy days, looks like a very good start 🏆 😵‍💫🤘🏼
Likes
15
Share
Hallo zusammen 🤙. Sie wächst sehr schön und macht keine Umstände.
Likes
4
Share
Most of the autos are being moved into my dad's garden or the backyard. I am happy to test out the genetics that I've bred. I think I've recently found my first. I herm, but this plant was super.Stressed out, and it was a photo auto hybrid. And I mean, noticeably herm out like it was making pollen sacks, as opposed to one or two nanners. Out of the photo seeds granted, I haven't grown many deep into Bloom. It's not a good sign, though. That I had one herm, but I know that one was super stressed out, so I put one2 right now. And my current run, that I'm gonna divide for me. And my cousin, and I'll say, how many herm out
Likes
34
Share
Hey everyone ☺️. After 60 hours, the lady's case was already open :-). Today the seed was placed in soil :-). I only use the soil for cultivation because I have it left and it has to go slowly :-). When repotting, it comes in Canna Coco 👍. I watered the soil with some Canna Rizotonic before the seeds got 1 cm under the soil :-). After that, the pot was placed under a hood in which I sprayed clay every day so that the humidity is between 80-90%. I do this for the first few days until the head looks out of the earth. From this point on, I open the hood at the upper opening bit by bit every few days so that you can slowly get used to 65% humidity before the hood comes down. It is also only poured when the roots are right, until then the earth is sprayed. Which training I will use I will decide spontaneously when the time comes :-). Until then, I wish you all a lot of fun with the update. Let it grow and stay healthy 🙏🏻🍀 You can buy this Strain at : https://www.exoticseed.eu/ Type: Quick Sherbet ☝️🏼 Genetics: 75% Indica / 25% Sativa Sunset Sherbet X Black Lemon 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .
Likes
13
Share
@NanoLeaf
Follow
End of week 9 One word - Voluptuous! The neighbours are definitely smelling it now, luckily the terpene profile on all of these plants make it smell more like a citrus farm. Another smooth sailing week and I have noticed some of the ladies are drinking less and the leaves are fading more and more every day. I am preparing for harvest as the girls are almost screaming to be cut down but I’ll be patient. I’ll be using my grow tent as the drying room because I can keep the environment in check. Making sure all my effort is not ruined by a rookie mistake such as not drying properly. Removed some dead leaves and thats about it. I’ve basically just been checking my PH and watering through this entire grow. It’s cool being easy and easy being cool!
Likes
134
Share
@Roberts
Follow
Number 10 has been flowering strong. Has about a week left for feeding then to a 2 week flush. I gotta work with what the plant tells me. Thanks again fast buds Thank you grow diaries community for the likes, follows, and subscriptions on my YouTube channel. 🌱🤜🤛 Happy growing
Likes
97
Share
@Roberts
Follow
The time has come for cbd crack 1:1. Going into darkness tomorrow, will update harvest video in a few days. It has fox tailed pretty badly, but that is ok. Thanks again fast buds🌱 Update- harvested and video uploaded Time to dry. Thank you grow diaries community for the follows, likes, plus the subscriptions on my YouTube channel. I greatly appreciate the support. Happy growing 🌱🌱🌱 If anyone needs to purchase fastbuds here is a link for my affiliate program, thanks 🌱 https://myfastbuds.com/?a_aid=60910eaff2419
Likes
8
Share
the Germination process was very easy and had no problems to sprout in paper towel. After she first touched water it needed 5 day to get root and open shell with her tiny white baby leaf and next I put it in to the pot in coco coir it was already watered and i just put the cup on top next day she was fully green and strong stem with little hairs <3
Likes
39
Share
@DE_BW
Follow
Week 4 of flowering is now complete, and Guava Runtz is looking extremely promising. The plant has developed a large number of bud sites across nearly every branch, and stacking has clearly started along the stems. What were previously individual flower clusters are beginning to connect, giving a good indication of the long spear-shaped colas that may form over the coming weeks. The structure remains very open and well-spaced, allowing light to reach deep into the canopy. This should help many of the secondary and tertiary bud sites continue developing instead of becoming larfy lower growth. Frost production is already becoming noticeable on the sugar leaves, and all pistils remain bright white, showing that the plant is still in the active building phase with plenty of development ahead. This week I performed another light defoliation to improve airflow and light penetration. The plant responded well and continues to look healthy and vigorous. I expect to do one final cleanup next week before letting her focus entirely on flower production for the remainder of the cycle. At this stage, patience is key. The foundation has been built, stacking has begun, and now the goal is simply to give the plant time, maintain a stable environment, and let the buds fill out naturally. If development continues at the current pace, Guava Runtz has the potential to become one of the most productive and visually impressive plants of this grow. 🍈🔥🌱
Likes
13
Share
Watered in coconut water, microbes & aloe. Topdressed some bloom Fan fell on front left plant when I was moving it broke a top lol. Whoops
Likes
Comments
Share
November 3 - Welcome to the beginning of week 3! All of them are looking quite different, but that’s expected LOL Plant C is missing an entire leaf/branch! I’m curious what it’s going to do for the overall yield… we will just have to wait to see!
Likes
2
Share
@Selkot
Follow
The week started with heavy storms and big rainfalls... the girls are back in the tent 😊 I took out my 60x60x160 tent, a Samsung 85w bulb LED and transferred my Garpsen bars (70w together) from my big tent. It's a bit light as lighting, but looking at the trichos end of the week (and the intense smell in the tent...) I think it's time to start flushing. They got a final half dose of nutrients at the beginning of the week and a very lil haircut, I'll flush them by tomorrow. Can't wait to see what they produce; I'd say between 35 and 45 together, hoping for a better surprise 🙏
Likes
3
Share
🌿Week 4: Defoliation & SCROG Setup Week 4 was all about structure and airflow. The canopy was getting bushy fast, with a ton of inner growth, so we went in for a solid defoliation session across the board. Lower fans, overlapping leaves, and shaded internodes were cleaned up to let light penetrate deeper into the canopy and reduce potential humidity traps. Right after that, we finally dropped the SCROG net, stretched out gently across the canopy to guide the branches horizontally and prep for flower stacking. Some of these phenos are already reaching for the sky, so the timing felt just right. Captured a full-time-lapse clip of the defoliation + netting process. It’s super satisfying watching the chaos turn into clean lines. Nature meets intention. Feed Bloom since 20/6 22/6 Defoliation 🌱 Plant Response: After defol, they bounced back fast. Tops are perky, leaves are praying, and stretch is continuing in a controlled way. The structure’s more open now — better airflow, better light distribution, better everything.
Likes
12
Share
@ELPIRATA
Follow
(11/06/20)Dia 36.- Actualizacion correspondiente a la semana 6 de Cultivo. Hasta el momento se ha dedicado principal atencion al tejido en la red Scrog. El día 11/06/2020 se han regado 3 plantas en macetas de 11 litros: X2 Semillas Auto Lemon Kix= 1L [1,5mlKnactive+3ml/L ATAGrowth-C+5mL ATAFlower-C] PH 6.1 / EC= 1.29 Tº=2 X1 Semilla Auto Tutankhamon= 1L [1,5mlKnactive+3ml/L ATAGrowth-C+5mL ATAFlower-C] PH 6.1 / EC= 1.29 Tº=2 *El día de hoy se han regado 1 planta en macetas de 7 litros: X1 Semillas Auto Lemon Kix#3 = 550 ml [1,5mlKnactive+3ml/L ATAGrowth-C+5mL ATAFlower-C] PH 6.1 / EC= 1.29 Tº=22 El día 14/06/2020 se han regado 3 plantas en macetas de 11 litros: X2 Semillas Auto Lemon Kix= 1L [1mlKnactive+3ml/L ATAGrowth-C+5mL ATAFlower-C+2mLAutoTop] PH 6.4 / EC= 1.49 Tº=22 X1 Semilla Auto Tutankhamon= 1L [1mlKnactive+3ml/L ATAGrowth-C+5mL ATAFlower-C+2mLAutoTop] PH 6.4 / EC= 1.49 Tº=22 *El día de hoy se han regado 1 planta en macetas de 7 litros: X1 Semillas Auto Lemon Kix#3 = 550 ml [1mlKnactive+3ml/L ATAGrowth-C+5mL ATAFlower-C+2mLAutoTop] PH 6.4 / EC= 1.49 Tº=22 El día 17/06/2020 se han regado 3 plantas en macetas de 11 litros: X2 Semillas Auto Lemon Kix= 1L [0.5MlBLOMBASTIC+0,5mlKnactive+5ml/L ATAGrowth-C+5mL ATAFlower-C+1mLAutoTop] PH 6.2(?) / EC= 1.56 Tº=23 X1 Semilla Auto Tutankhamon= 1L [0.5MlBLOMBASTIC+0,5mlKnactive+5ml/L ATAGrowth-C+5mL ATAFlower-C+1mLAutoTop] PH 6.2(?) / EC= 1.56 Tº=23 *El día de hoy se han regado 1 planta en macetas de 7 litros: X1 Semillas Auto Lemon Kix#3 = 700 ml [0.5MlBLOMBASTIC+0,5mlKnactive+5ml/L ATAGrowth-C+5mL ATAFlower-C+1mLAutoTop] PH 6.2(?) / EC= 1.56 Tº=23
Likes
60
Share
@SooSan
Follow
12/12 + 28 jours Mon 1er Schwazzing !!! Photos et vidéos avant et après la defoliation 1️⃣ 🏠 90x60x90 ☀️ FC-E 4800 => puissance a 70% 🍁 1x Black Bomb / Philosopher Seed 2x Amnesia Lemon / PEV Seeds 1x Blueberry / PEV Seeds 1x Blueberry / 00 Seeds 1x Wappa / Paradise Seed 1x Dark Phoenix / Green House Seed 1x Quick Sherbet / Exotic Seeds 1x Mango Cream / Exotic Seeds 1x Banana Frosting / Sensi Seed 1x Hindu Kush / Sensi Seed 4x Fast Mix / Sweet Seed 📎 https://growdiaries.com/diaries/122084-grow-journal-by-soosan 📎https://growdiaries.com/diaries/124052-grow-journal-by-soosan 2️⃣ 🏠 30x60x50 ☀️TS1000 => puissance a 80% 🍁 4x Quick Sherbet - Exotic Seed 📎 https://growdiaries.com/diaries/122080-grow-journal-by-soosan Sponsorisé par Mars Hydro
Likes
117
Share
OMG OMG OMG my caligirl and really very prosperous ... These girls are about a meter and one of them has just passed the central bar coming to measure almost at one meter in height. I hope to travel the right road until the end
Likes
22
Share
@Slobasian
Follow
Love every plant each one is growing differently stacking different even the visual difference of one strain growin two different ways combined smells of diesel, pez candy and lemons
Likes
8
Share
So, absolutely against the recommendation I received from a friend of mine who's been growing for 20+ years, I pruned/defoliated my plants up a bit this week. I decided to for a few reasons. - the plants were really dense with foliage, many leaves overlapping and pushing other leaves - most of the bud sites were shaded under several layers of leaves - the leaves pilling up would have been restricting airflow quite a lot, I want to prevent budrot or mold by increasing aeration - I wanted to control where the plants were growing, and focus their energy into the buds - with this being an outdoor grow late in the season with less sun I felt it was more important to expose the developing buds to the sun With all that said, I think my plants have responded extremely well to the pruning in the last few days. I've never pruned or defoliated before so this is going to serve as a test for me. I like doing new things and seeing what happens. No matter what, these plants look really good right now and I'm sure I'll get a decent harvest, I'm trying to push it from decent to fantastic. My PPM is a bit high, though none of the plants look like they're being hindered by it. I did a partial water change on 2 of the 3 (the one in the 3 gallon bucket and the one that looks more like and indica). The 3 gallon bucket plant was at a PPM of 5000ish so I made sure to get it more in line with the other two, and with the partial water change I got it to around 2000. The other plants are sitting at right about 3000. I will continue to monitor the plants and check PPM, if it doesn't go down next week I think I'll do another partial water change. I want to keep pumping in nutrient while preventing any burn or lockout. Trichomes are no observable on the two plants in larger buckets. The smaller bucket plant was the last to sprout, so it's about a week or two behind the others. This week has been pretty poor weather where I'm at. Lots of rain and clouds. I've kept the plants under cover but still in direct sunlight. This coming week is supposed to be clear sky again so I'll move them to capture the most light once the rain stops. I know defoliation is debatable, especially with outdoor grows, but I like to push boundaries. Here's a list of the things I've done with this grow: - kratky method hydroponics (other than a partial water change I have added no water since starting in buckets, no airstone, no pump) - Winter grow (shortest light period of the year here) - Topping (and it looks like one is more like FIMing, also one grew as if it were topped without my input) - Dense nutrient load (I've added more nutrient in this grow than any grow I have previously done. Mostly because I never achieved super large buds and I'm really aiming for that this time) - Water change (like an aquarium, I've never done a water change other than flush before, this week called for it with the high PPM which I think was residual from nutrient loading in veg so I wanted to make sure there's room for the flower nutes) - Defoliation/pruning (nothing too crazy or drastic, started this week and don't plan to trim again unless I see a need to)
Likes
44
Share
@Aedaone
Follow
The temperatures, humidity, height, and watering volume(if measured) in grow conditions are all averaged for the week. The pH is soil pH. Any watering done by me is well water which is 7.6 pH and 50° F. Any listed nutrients are ml/gallon of soil spread evenly across the top of the soil. Day 1 we had a high temperature of 79° with mostly cloudy skies. The nights have been dripping below 69°F, creating an ideal environment for powdery mildew. I watered about 3 gallons of well water. I treated with Arber biofungicide. Lady bugs were released and are having an aphid feast. Day 2 we had early morning rain followed by mostly cloudy skies. High temperature was 77. The rain took care of the watering today. I'm treating with arber again and more defoliation. Day 3 we had a high temperature of 81°F, skies were partly cloudy, and I watered 3-4 gallons from the hose. Day 4 we had a high temperature of 83° with sunny skies. I watered 4-5 gallons from the well. I removed leaves with powdery mildew and treated with Arber. Day 5 we had a high temperature of 88°F. Skies were clear and sunny. The humidity was around 90% today. I watered 4-5 gallons from the well. I treated with Arber again today. Day 6 we had high temperature of 89°F. Skies were sunny. I watered about 4-5 gallons with well water. I've been treating these with Arber biofungicide and it's had some good effect. I stripped all the infected leaves.I'll get the third tomorrow. I'll treat these tomorrow with growers ally fungicide and see how that does. Day 7 we had a high temperature of 86°F with partly cloudy skies. We're expecting rain tonight and it's super humid today. The weather is not cooperating while I'm treating for powdery mildew. This week was a success. The plants gained on average 3 inches in height. They've slowed down their upward growth and are transitioning into flower. The weather has been atrocious for cannabis. These girls are super healthy but the humidity and cool nights have caused perfect conditions for powdery mildew. I began treatment with Arber biofungicide and it's working pretty good. I'm switching now and will treat late day 7 with Growers Ally fungicide. I removed the infected leaves and defoliated to help light penetration.
Likes
15
Share
@Bncgrower
Follow
So far so good, this girl is developing really well. She's heading really well into the final weeks 💪✌️🌿