Processing
Likes
Comments
Share
@JerMeds
Follow
Added side lighting on day 10, 2X30 true watt thin led panels. So now I got 2x100 watt, 1x70 watt and 2X30 watt LED lights for a total of 330 true LED watts. Its very bright. I introduced them too a very light feed solution yesterday when they woke up. They seemed too perk up right after. I have been working on trying to get a time lapse working. I have been testing it and trying to get the bugs worked out. Maybe next week I will have some time lapse footage for you all...Maybe.
Likes
1
Share
@Calo
Follow
Eighth week of flowering, the buds are almost ripe, I'm starting to prepare the place where the plants will dry, I can't wait to smoke these fantastic genetics again.
Likes
3
Share
Likes
15
Share
@Brianm420
Follow
I’m happy one of the white widows is further ahead in flowering. I’m looking forward to enjoying some smoke.
Likes
54
Share
@Momentum
Follow
Sieht ein wenig Skeleton artig aus, die 3,5L ist buschiger, das hat man nun davon, wenn man ihr endlos Platz gibt.
Likes
82
Share
Hey guys! Another week and another update! At the end of this week I decided to finally start with the main lining and I won't lie... I was extremely nervous haha 😱 but I believe I did it well, without any major issue! I also decided to move the small 4th plant into a new home and it seems she will like the extra space! This week I also didn't feed my babies as I over watered them 😞 but they still showed some great progress! So I suppose it wasn't that bad! 😊 Soon I'll update the next week, which is also ready and has even more timelapses! Thanks everyone! :D
Likes
2
Share
@Dsant
Follow
D33 - 19/02 Haven’t changed the reservoir this week yet. A few burnt tips on Northern Lights #2, will probably go a little lighter on nutes next feed - she’s definitely more sensitive to them than the other ones. Overall great looking girls and nice growth. The #2’s are higher than the #1’s, nodes developing nicely and the scrog is definitely helping with lateral growth as well. — D35 Mixed a new reservoir with roughly 19L, at around 70% strength. pH 6.0 and EC 1.1 Humidity has risen a bit, so I installed the dehumidifier again. Apparently the tip burning has stopped, or at least slowed, which is good. #1’s are at around 25cm height, while #2’s are around 40cm height. — D36 Did another defoliation session as the girls really needed it. Cleaned a lot of the big fan leaves, airflow and light penetration is way better now. A few hours after and they’re super happy again.
Likes
410
Share
This grow with the TSW2000, FC4800 and 8x8 Grow Tent has come to an end🤘🤘. I'm so happy with the results mars hydro has done👍. Best lights you can get in my opinion and TONS of other people agree with me on this too👍. I always say mars hydro gets em frosty and their lights DID get em nice and frosty and the buds are so tasty and smell awesome🤘. I trimmed up 6 plants so far. Got 9 more to go. And it seems like I get a 1liter Mason jar per plant and is about 2 ounces per plant. Some are a bit more than 2. Not a huge haul per plant but I'm still very happy with it because the quality is amazing. I will never want to use anything but MARS HYDRO. Extremely satisfied with the entire grow with mars. The weed quality is very good and controlling the heat was simple because they don't get that hot. The lights were very easy to setup and so was the tent. I STONGLY recommend any products from Mars Hydro. You will not be disappointed 👍 Thanks for following my grow and good luck to all my friends and remember to have fun with your grows🤘🤘 rock n roll a joint everyone🤘🥁🎸 FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress2 Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA Thanks for taking the time to read and check out my shit🤜🤛 GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍
Likes
2
Share
Very excited for my first grow ever. My soil is the Biobizz-Light Mix in a 11L pot .I got so impatient that i even dug it out at some point to see the progress...i hope it won't have any consequences. The first days, i only sprayed the soil with some water to keep the soil moist. At Day 4 of germination i watered it for the first time with 250ml tap water at 6,5ph. I will run my light for 18 hours now at a distance of 60cm with full power. That will lead to round abot 215 ppfd and 12k lux for the final days of germination. At day 6 after germination two darker spots appeared on the first 2 leafs. I hope it’s just because of some water drops on the leafs. Watered every 3 days with 350-500ml of 6,5ph tap water. 23.05.24: For my definition the vegetative stage starts today. I will turn the light up to 500 pphd Very excited what will happen next!
Likes
8
Share
Likes
4
Share
iSorin 🔥 From Beanpatchseeds.com (HFTCS)x May-trix I got 2 different phenotypes from these ladies. Both smelling like oranges 🍊 and pure gas! Let's me tell you she is a real treat! Full.of resin and like oils putting off a great scent wanting you to come back for more.
Likes
22
Share
@Rangaku
Follow
Wedding glue got the chop this week after flushing her all week . The house smells of sweet sweet fruit . Decent harvest looks to be around 10 oz but I’ll find out in a week or so .
Likes
65
Share
@Dendegrow
Follow
Week 2 of the flowering phase flew by 🌱💨. Unfortunately, I may have overdone it with potassium or kept the water level too high – the classic signs of clawing leaves were evident. Thankfully, they seem to be recovering now and are back under control 💪🍃. My IR night experiment is showing clear results 🌌: The plants exposed to infrared radiation at night stretched significantly more. This might be especially beneficial for this indica-dominant strain as it leads to better canopy distribution, improved airflow, and reduced risks of mold and disease. Plus, the light distribution is much more efficient now, which I’m excited to see pay off. On the downside, my Orange Sherbert turned hermaphroditic 😔. It’s hard to pinpoint the cause – overfertilization seems unlikely since I’m using only organic nutrients. I suspect it might be linked to an E-field experiment I’ve been running. To confirm this theory, I’ll conduct a new grow with a similar strain next year to see if the electric field negatively impacts cannabis development. Stay tuned for updates! Drop a like and follow along for more grow insights 🌿✨. See you next week! Woche 2 der Blütephase ist wie im Flug vergangen 🌱💨. Leider habe ich wohl etwas zu viel Kalium gegeben oder den Wasserstand zu hoch gehalten – die typischen Anzeichen von Adlerkrallen waren sichtbar. Zum Glück scheinen sich diese jetzt zurückzubilden und sind wieder unter Kontrolle 💪🍃. Mein IR-Nachtexperiment zeigt bereits deutliche Ergebnisse 🌌: Die Pflanzen, die nachts mit Infrarotstrahlung bestrahlt wurden, haben deutlich stärker gestretcht. Das ist besonders bei dieser indica-dominanten Sorte wahrscheinlich von Vorteil, da es zu einer besseren Verteilung des Blätterdachs führt. Dadurch verbessert sich die Luftzirkulation, das Risiko von Schimmel und Krankheiten wird minimiert, und die Lichtverteilung wird effizienter. Ich bin gespannt, wie sich das weiter auswirkt! Leider hat meine Orange Sherbert gezwittert 😔. Woran das genau liegt, kann ich schwer sagen. Eine Überdüngung halte ich für unwahrscheinlich, da ich nur biologischen Dünger verwendet habe. Ich vermute, dass mein E-Feld-Experiment eine Rolle spielt. Um das zu bestätigen, werde ich nächstes Jahr einen neuen Durchlauf mit einer ähnlichen Sorte machen und prüfen, ob das elektrische Feld tatsächlich eine ungünstige Rückentwicklung der Pflanze verursacht. Bleibt dran, lasst ein Like da und folgt mir für weitere Updates 🌿✨. Bis nächste Woche!
Likes
12
Share
@Chubbs
Follow
420Fastbuds-FBA2510 I'm excited as it's tester time. Germination week is complete. I planted 3 seeds and had all 3 sprout within 48hrs of being in the soil. I do soak them for 48hrs in a glass of water before planting. I can't wait to see what the weeks to come will have in store. Happy Growing
Likes
7
Share
Likes
9
Share
@DE_BW
Follow
The plant has clearly reached its final stage of flowering. Bud development is complete and the structure looks fully finished. Trichome coverage is extremely dense across buds and sugar leaves, giving the flowers a heavy, frosty appearance. The pink and purple coloration has continued to spread further down the plant, creating a very appealing contrast and confirming full genetic expression. Aroma has intensified significantly and is now strongly dominated by a sweet, ripe apricot / marmalade note with no harsh or green undertones. Flushing has been initiated this week, with harvest planned in approximately four days. Overall plant health remains solid, and no further swelling is expected. Focus is now on preserving terpene profile and optimal ripeness.
Processing
Likes
12
Share
@dusterp
Follow
The flowers are starting to fill in. The bucket had a slight sent to it so I opted to run a two hour flush with florakleen ph'd. I then added fresh nutrients for the week. I also upped the hydroguard to 2.5 ml/gal. Thoughts on the 2hr flush? Add some calmag and adjusted the light. Did more LST to, it was getting bit to humid. Looks like its getting fatter and fatter.
Likes
5
Share
Doing well planning a light defoliation this week.
Likes
3
Share
@Maha420
Follow
The spots on one of the plants have completely disappeared. Defoliation of the 3/4 bottom leaves. Video taken on day 27 of germination, on 10/24/2025. I started fertilizers on 10/20/2025 — 800ml (Heaven 1ml, Grow 1ml). Second watering on 10/22/2025 — watering 1L (Grow 1ml, Calmag 0.6ml, Heaven 1ml). They are really very beautiful and developing very well.