Likes
Comments
Share
The voodoo juice x platinum hermed this week so moved it to it's own tent. We have 6 plants remaining in the room. I cut out the maxigro this week. They are getting .5 tsp per gallon of maxibloom now. Seems to be keeping everyone happy. Not much to report other than that. Buds seem to be progressing pretty nice.
Likes
29
Share
Day 175 Flowering is progressing and the weather has cooled down. I'm wondering when I'll start cutting back on fertilizer. I think I'll do it for another week or two. There's just a little rain this week. I think the buds are small, but they're dense.
Likes
20
Share
Likes
4
Share
By far I think this strain was a very good one !! I would definitely regrow this one ! Beautiful bag appeal and the terps are good too ! Very smooth when inhaling and sneaks up on you !
Likes
3
Share
Elsa her stretch is going to an end and after the stretch you can give your plant a Defloration…21 days after Stretch / pre Flower start. I take my scissors and give her a cut. I have never done that before. A new Experiment of Defloration. A few days later Elsa is looking a little bit thirsty but she look okay… we can start in Grow week 10 🤗
Processing
Likes
6
Share
@Mattheous
Follow
Jour 58 flo+21 Bon bah plus que attendre , pk 13/14 depuis une semaine avec tout le reste , des belle têtes sur les varieté de Royal queen moyen pour les XXL mais on verra à la fin Jour 61 flo +24 Le taux d’humidité étais encore au Max impossible de la descendre malgré les extractions , tout enlever pour nettoyez le sol imbibé d’eau . tout a était replacé pour que les buds est le Max de lumières . Les feuilles « gourmande » est celle du bas sans bud qui était tombante on était enlevé aussi pour maximiser les tétouzz (Ps : j ai plus de Terra Flora .... faut je cours en chercher )
Likes
10
Share
Did some minor defoliation, and added final nutes before flush. Although stunted in veg, the outer two smaller plants are flowering well, thickening up, and smelling dank af... the center largest plant is still dealing with some type of deficiency that's been very difficult for me to diagnose. It's still chugging along with lots of bud spots, but the kolas aren't nearly as thick and seem like they might turn out larfy. It's also drinking the same amount of water much more slowly than the other two smaller plants... kinda strange right? Ps. I kinda f-ed up the compost tea and fed it to the plants before knowing it... I let the tea brew for 72 hours and should have stopped at 48 hours... plants didn't seem to mind too much though (I don't think the center plant's deficiencies have anything to do with the overripe tea.) and don't pay any mind to my nute percentages, I can't deal with that rn 😂
Likes
51
Share
🎩🌈🍬 NO TINY PURPLE PISTILS STICKING OUT LIK MY LAST RUN OF RUNTZ I DID BUT WE GONE SEE HOW THEY TURN OUT 👀 #BUDSHOOT
Likes
7
Share
Big buds , Solid but light , Smoke is smooth and burns slow, taste is 10/10
Processing
Likes
11
Share
Sorry guys been lagging on posting because got a lot other stuff going on n I figured this plant would’ve been chopped by now but I must say she’s been filling out quite nicely..I lowered the light hours to try n see if thatll he’ll ripen her a bit faster as I’m looking to replace her with another plant
Likes
148
Share
@BioBuds
Follow
Greetings my dear Jungletamers, So a major surprise came when @MarsHydroLED contacted us and asked if would like to try out their new SP 3000 light. Being a fan of Mars Hydro for years, we of course accepted their offer. We are totally in love with this light. I was when I saw it in another grower's setup and was in awe of its output and results. So with much pride and thankfulness for the presents the Universe bestowed on us, in the form of MarsHydroLEDS offer and the bountiful harvest of the last grow, (which I am thoroughly enjoying btw, such a great weed to have grown ourselves) we start out on a new adventure that we can't wait to share with you. With many lessons learned from the previous grow, a mighty producing strain in the form of Expert Seeds Gorilla Glue #4, a.k.a Expert Gorilla's and a tweaked super soil mixture, we are setting out to hopefully get over a gram per watt, preferably 1.5. The Setup A 4.5 (140 cm) x 2(70) x 6.2 (200) grow tent, giving me a .98 m2 workspace. This space is customized to my needs. A standing fan will provide airflow through the whole grow, a top fan will help guide cooler air past my lights onto the grow. 3 56 ltr pots will be the home for the plants when they are 2 weeks old, up to then in smaller jars. The Light The leading role and star of the show will be played by the Mars Hydro SP-3000, so kindly provided by MarsHydroLED, which we will test and review here and I might say, endorse. I'm very careful with who I endorse and support these days, but a company with that many wins in design, I'm talking ever since their first range came out in 2009 these guys have been raising the bar for the whole industry, I did not hesitate to support this leading brand. If you want to compete with these guys, you better bring some quality AND affordable pricing. Why do I endorse the SP-3000 without ANY hesitation? It is seriously THE BEST light on the market in this price range and size group. It has an enormously effective output in U/Mol and with 30% less energy waste comparing to older LED lights. Prove me wrong! And with a company holding a considerable market share selling thousands of units every month, competing on price and quality, one would think that customer service would suffer. Of course, also Mars Hydro is not perfect, but check the sheer amount of people that not only praise the light but also the service received, should the light somehow not perform up to par. It is this dedication to their customer base that made this company have a fanbase... Yes, a fanbase with a website and a wiki. So if you are looking to buy new lights, check out the END OF SUMMER OFFER at the Mars-Hydro Global Store on Aliexpress: https://marshydroled.aliexpress.com/ 👈 Check their offers but also their score, they ship from a warehouse near you so you don't have the extra import fees!! Cut out the middleman and have a deal on these lights!! At the moment I write this in August 2021, the lights are 408,20 euro when sent from Germany to the rest of Europe, that's 40 euro cheaper than the other Mars outlets, BUT EVEN 60 euros cheaper than ordering at a grow store!! The Strain: Experts Seeds - Expert Gorilla feminized regular. Don’t let the name fool you because Expert Gorilla is suitable for growers of any skill level. However, you do need to be an experienced smoker because Expert Gorilla is one of the most potent strains on the market. Lineage: Chem Sis x Chocolate Diesel x Sour Dubb Popularity: Extremely Popular Flavor/Aroma Profile: Chocolate, Earthy, Fuel Yield: 400 g/m2 Stress Tolerance: High resistance to disease Potency: 24% THC Flowering time: 58 - 63 days The Soil: Those who saw my Monstercropped Gelato #33 grow (you should see it if you didn't, I'm so proud of that grow), know about my super soil and organic nutrients/ permaculture tea combo that starred in my previous diary. Because of the great results, we are going to use the same recipe, adjusted some more with some new ingredients that will complete the mix and give an even more sustained super soil buffer. 20% Atami Bi-grow (very similar to ocean forest) 20% Atami worm castings 20% Atami Coco Coir 10% Hydrocorn 10% Peat powder 1 cup Fossil seaweed chalk 1 cup bonemeal 1 cup bloodmeal 1 cup Microlife 3-4 teaspoons of epsom salt 3 cups of activated biochar (activated with our own permaculture tea) I just made layers, starting with hydro corn on the bottom to aid airflow/run-off. On this I started layering the coco coir, Bi-grow, peat, castings, and amendments in a way that the more mature the plants get, the more phosphorous and less nitrogen they will find. Every time I made three layers, I would mix them by hand. This way we simulate natural soil, which consists of humic layers, composting plant waste, fungal and microbial life, and nutrients from fossilized sources. The Nutrients I will start with just adding 6.4 PH water, although this soil should buffer ph itself and regulate, after 4 weeks, I'll slowly be adding: - Biobizz Grow - Plagron Alga Grow - Biobizz CalMag - Biobizz Flower - Plagron Alga Flower - Biobizz Topmax - Melasses The Tea Some of you might remember the permaculture tea from my previous grow, I have a short video in my harvest page showing how we make it), it will star again in this grow. - (Rain)water - Comfrey (whole plants) - Dandelion leaves - Roots and leaves from the earlier grow - Minor periwinkle (Finca minor) is a plant we have in our garden, it contains an alkaloid that is associated with increased brain function but also is a light toxin for wee beasties and other unwanted guests like gnats (who hate it). - When flowering I add some wood ash to this mix Thank you for checking in on one of my grows again! Thanks for all the love on my previous grow, check it out if you haven't seen it!! Hug Bud
Likes
205
Share
@yan402
Follow
This two were part of another diary and got moved out due to space reasons at VW8 and moved back indoors at VW20 https://growdiaries.com/diaries/218151-auto-god-s-glue-grow-journal-by-yan402 13.09.25 VW21 Both are looking good and are developing tighter nodes than when they were outside, I'm going to have to keep cutting them back every once and a while I also applied nematodes against thrips and fungus gnats. 20.09.25 VW22 some spots and some yellow leafs, I think it's a root problem, probably root bound, but both seem healthy and are getting thicker so maybe just top up with Coco coir and give a slight different nutrient schedule less Tri Part Bloom could do the trick MAYBE lol. 27.09.25 VW23 Topped up the pots with extra coco coir and trimmed the side roots a bit, both plants were root bound 📹 03.10.25 VW23 did a HST/LST session 📹 🌱💦🌱💦🌱💦🌱💦🌱💦🌱 Day to day tasks & actions 🌿 🌱💦🌱💦🌱💦🌱💦🌱💦🌱 11.10.25 VW24 – Fed 3l of #1 → 2l runoff (*RUNOFF reused for tomato plants) 🍶💧🍶💧🍶💧🍶💧🍶 💧 Nutrients in 30L #1 🍶💧🍶💧🍶💧🍶💧🍶 💧 TriPart Micro: 10 → 30 → 40 ml = 0.33 → 1.00 → 1.33 ml/L 🍶 TriPart Grow: 0 ml = 0.00 ml/L 💧 TriPart Bloom: 10 → 30 → 20 ml = 0.33 → 1.00 → 0.67 ml/L 💧 Cal-Mag: 60 ml = 2.00 ml/L 🍶 Home-made FFJ/FPJ (new fish batch): 30 ml = 1.00 ml/L 💧 pH Down: Citric acid (BuxXtrade) — adjust to ~pH 6.0 📦 TOTAL : = 160 ml per 30L = 5.33 ml/L 🍶💧🍶💧🍶💧🍶💧🍶 ⚙️✂️⚙️✂️⚙️✂️⚙️✂️⚙️ ✂️ Tools & equipment ✂️ ⚙️✂️⚙️✂️⚙️✂️⚙️✂️⚙️ ✂️ 2× MarsHydro SP3000 ⚙️ MarsHydro 150mm ACF Ventilator ✂️ Trotec dehumidifier (big unit) ⚙️ Mini no-name dehumidifier ✂️ Kebab skewers (LST – stainless) ⚙️ Wire + roast skewers (LST assist) ✂️ Scissors (HST) ⚙️ Vacuum (for spills & cleanup) ✂️⚙️✂️⚙️✂️⚙️⚙️✂️⚙️✂️⚙️✂️⚙️ 🍒🍭🍬🌈🍒🍭🍬🌈🍒🍭🍬🌈🍒 🦄Fantasy Feast ( Seeds)🦄 🌈🍒🍭🍬🌈🍒🍭🍬🌈🍒🍭🍬🌈🍒 Species: Hybrid (Regular) Genetics: The mother is Unicorn Whip by Dirty Bird Genetics. The father is Charcuterie by Cannarado Genetics. Effect: Unknown Mixed effect body and head high Flavor: Some phenos are Skunky gassy fruity, some are fruity sour citrus with a chemical touch and a touch of skunk Flowering: Estimated 8–10 weeks Resistance: Strong — Testing phase done
Likes
8
Share
@Abreuvoir
Follow
Day 28-35 Mistake d28-29 (videos) Shortly after transplantation, I tried to LST the plants by making a bend in the main line. However, I did it too quickly and without proper preparation. This ended up more like a HST. The poorly developed roots suffered from the force coming from the bending. I also happen to have increased the DLI from 25 to 30-32 which surely didn't help. The result of this was stomped growth plus leaf scorch mainly caused from roots damage and lack of hydration/nutes intake. Fortunately, they did a nice comeback during the following days. Plants 1 and 3 survived the pinching d31 Plants 2 and 4 were topped from severe pinching d31 Grow room was updated to final setup d34 They are drinking like healthy plants d34 Controls setup: DLI 32mol RH 60% Temp 24.8°C Plants fan 30m/15m - on/off Extract fan >= 25.3°C
Likes
1
Share
Welcome to Week 9! December 14 - Took some pictures of Plant C since she is nearing harvest time! Definitely not ready yet, but will be flushing and keeping a close eye on her! Plant A & B are a little behind, and will post some pictures later this week! Hoping to harvest all by the end of December 😁 December 15 - Added photos from Plant A&B December 17 - Keeping a close eye on them, not quite ready for harvest yet! Today is day 67 for these girls 🤣 Listed harvest time online is 70days so I’m guessing they will be ready next week!!!
Likes
Comments
Share
@n1mbu5
Follow
OK guys I've shut them down to 4hrs light a day for 2 days now. They have really filled out those buds and are looking extra sugary. I have been watering with 140ppm water at 6.2-7 pH with flawless finish for 6 days now. I have just given them probably the last watering will leave them for another 3-5 days on 4hr schedule before turning lights off for 2 days and then harvesting. Next diary will be the harvest!! I hope nothing goes tits up from here😂
Likes
12
Share
the waterworks come covered in some olie residue and i only did a few rinses. I think it kept the ph high for some time and i did a few more water cycles after complete setup. Everytime getting rit of more oil film. I like the bucketd rinsed the leca pepples in high ph tap water and again it took me some time to get ph down but this time no oil residue :) After a few days i felt i got ph under control so started the canna nutes schedule.
Processing
Likes
27
Share
9.26 - The Dumpster Queens is really starting to stank good. Very diesel and earthy! The buds are still putting on weight and are dense, very little squish or give when I give em a moderate pinch. I am imagining I have ~3 weeks left before chop.
Processing
Likes
6
Share
She's looking very very frosty, strong minty sweet aroma,very powerful aroma, sticky buds, super frosty, compact nuggets, super happy with this strain can't wait to grow her again, super recomended strain. 100% organic grown using biotabs organics, guanokalong and florians living organics.
Likes
4
Share
F+29 20190125 - Plants still gaining more and more resin. Very nice production. I am so happy doing this! Going to give them another feeding tonight. F+30 20190126 - FB#2 has started showing some clawing, and I will have to do some research to diagnose. F+31 20190127 - With the help of some forum inquiries, there was a Nitrogen Toxicity appearing to start on FB#2. To be safe, since both plants got the same amount, they were both flushed with unfiltered, PH corrected, tap water. F+32 20190128 - Both flowers appeared to have improved since the flush. Nice amounts of Resin are easily visible, and the smell is amazing at this point, like a wift warm berries travelling into my nostrils. So sweet. F+33 20190129 - One more flush today, just to be safe. I adore these fabric smart pots. They drain everything but exactly what needs to be there, and they are easy to handle. I also enjoy being able to bust through the fabric to help with LST. F+34 20190130 - Plants still improving. They appear to have bulked up a bit more, and gained some more frosty resin. F+35 20190131 - I can see more pistils turning orange. I estimate about 2-3 weeks to go. FB#1 appears to be behind in it's maturation, but not its bulk or resin production.