Vote Now 🏆 for the Grow Awards 2025!
Likes
2
Share
Así cumple su 11va semana de vida y 7ma semana en Floración, esta semana han habido cambios en el jardín ya que al fin pude adquirir un tent, muy contento puesto a que es lo suficientemente espacioso como para meter 6 planta. La Amnesia luce preciosa en el tent, los capullos están bien pesados y llenos de resina, tuve que amarrar los capullos principales dado a que el peso de los mismos se llevaban las ramas para abajo. En esta semana se regó una vez con fertilizantes, en la solución de riego se utilizó: 3ml Flora Gro, 4.5ml Flora Bloom, 3ml Flora Micro y 3ml MagiCal. La solución de riego marcó 515ppm y 6.0 PH.
1
16
Share
@EaRtH
Follow
2.2. - Seems like I'm still doing something wrong. My plants got more yellow. Watered 💧 4.2. - I've added and adjusted some wires. Also, I've decided to defoliate a bit...at least the most yellow parts. Buds are swelling and getting more frosty each day ❄️ 5.2. - Watered 💧 7.2. - I think that I am making the rookie mistake of underwatering and that's the cause of yellowing of plants closest to the LED. Let's hope it that ✌️ Watered 💧 8.2. - Week wrap-up: It seems like plants like more water. Buds are getting more fat and sugar coated each day ❄️ Also the smell got more strong and bit fruity when touching them 🍎 🍦 2.2. - 8.2.2024
Likes
8
Share
Harvested at week 17 and hung whole plants to dry, no wet trimming. Tent humidity was set to 60% and the average temperature fluctuated between 65-70 degrees. Four usb fans and a levoit mini air purifier were added to help circulate air. Herb was dried for 15 days and larger leaves trimmed during day 7 of the process. Bucked and dry trimmed in air purified lung room, which was then kept at 60% RH to preserve moisture content and help maintain terpenes. Trim and larf was not weighed. But weight per individual plant is as follows. GMO 1 - 3.98 oz GMO 2 - 3.95 oz GMO 3 - 4.75 oz Total - 12.68 oz of head stash and smalls Also ended up with 2 grams of scissor hash Jarred up per genotype and labeled - burped jars couple times a day for about a week.
Likes
19
Share
Legend Timestamp: 📅 EC - pH: ⚗️ Temp - Hum: 🌡️ Water: 🌊 Food: 🍗 pH Correction: 💧 Actions: 💼 Thoughts: 🧠 Events: 🚀 Media: 🎬 D: DAY, G: GERMINATION, V: VEGETATIVE, B: BLOOMING, R: RIPENING, D: DRYING, C: CURING ________________________________ 📅 D84/B22 - 07/02/24 ⚗️ EC: 1 pH: 5.0 🌡️ T: 19-26 °C H: 55-65 % 🌊 8L 🍗 CalMag - Bloom A-B - B52 - Bud Candy - Big Bud 💧 💼 🧠 The VPD rate was stable on the right value for all the day ! Great, and many thanks to TrolMaster Tent-X ! 🚀 🎬 Added Timelapse video and screenshots ________________________________ 📅 D85/B23 - 08/02/24 ⚗️ EC: 0.8 pH: 5.2 🌡️ T: 19- 24 °C H: 45-80 % 🌊 2L 🍗 💧 💼 🧠 I'm lowering down the EC as I see signs of burns on tips 🚀 Humidity went out of control for about 2h 🎬 I made a photoset with "Garlic Puppy" enjoy the pictures 😋. Added Timelapse video and screenshots ________________________________ 📅 D86/B24 - 09/02/24 ⚗️ EC: 0.8 pH: 5.2 🌡️ T: 20-26 °C H: 50-70 % 🌊 🍗 💧 💼 Little defolation 🧠 🚀 🎬 Added Timelapse video and screenshots ________________________________ 📅 D87/B25 - 10/02/24 ⚗️ EC: 0.8 pH: 5.2 🌡️ T: 22-24 °C H: 55-65 % 🌊 🍗 💧 💼 Little Defolation 🧠 The buds are forming 🚀 Today VPD was very stable 🎬 Added Timelapse video ________________________________ 📅 D88/B26 - 11/02/24 ⚗️ EC: 0.7 pH: 5.2 🌡️ T: 20-25 °C H: 50-77 % 🌊 🍗 💧 💼 Little Defolation 🧠 🚀 Humidity went out of control for about 2h 🎬 Added 8 pics of Nicole, the timelapse video and the screenshots ________________________________ 📅 D89/B27 - 12/02/24 ⚗️ EC: 0.7 pH: 5.5 🌡️ T: 19-25 °C H: 50-70 % 🌊 4L 🍗 CalMag - Bloom A-B - B52 - Bud Candy - Big Bud 💧 💼 🧠 🚀 🎬 Added timelapse video and screenshots ________________________________ 📅 D90/B28 - 13/02/24 ⚗️ EC: 0.9 pH: 5.8 🌡️ T: 19-25 °C H: 50-70 % 🌊 4L 🍗 CalMag - Bloom A-B - B52 - Bud Candy - Big Bud 💧 💼 🧠 🚀 🎬 Added timelapse video and screenshots
Likes
15
Share
Привет садоводы 7 неделя вегетации , но я поменял световой режим теперь только ожидать и наблюдать как она зацветет растет она не очень быстро и впитывает воду медленно я поливал ее последний раз неделю назат , а может и больше , но горшок по прежнему еще тяжелый
1
5
Share
Привет садоводы 4 неделя растение после пересадки чувствует себя хорошо немного подросла цвет листьев идеальный ,даже немного переливаются перламутровым,
Likes
61
Share
@Roberts
Follow
So I am harvesting sweet Bourbon Kush Autoflower. It grew really fast. It smells like a wooddy sweet Bourbon. Hence the name. 🤷. She grew great for me in coco/perlite in a 1.5 gallon Potter. She has a great smell, great frost. Looks delicious. I am super eager to try the results. Thank you Spider Farmer, and Super Sativa Seeds Club. 🌱🤜🏻🤛🏻🌱❄️🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Likes
82
Share
Harvest day, you’d think I’d be excited and I was until last night. I’ve had to have my oldest Cat put down due to health reason 😿 I almost can’t be bothered to do this update, but here I am 🤦‍♂️🤷‍♂️ it’s only one more entry. I harvested this plant at day 58 of flower, it feels like she matured and finished quite fast, always a good trait. Her buds are rock solid to the touch and almost wet with trichomes, if that makes sense?! I took some pictures just prior to harvesting her. She’s now hanging on a peg hanger in my drying tent, cut into individual branches. She took barely any time all all to trim, she’s got a high bud to leaf ratio and everything I cut off will be dried, frozen and sifted to make Rosin. No waste at all. I aim to dry between 10-14 days, I generally keep the RH around 55% and the temp fluctuates around 18*C. She’s been an easy plant to grow and I’d recommend these genetics, In House have really outdone themselves with this one! I don’t usually do this, but I’m dedicating this grow to my late Cat Poochim. (I’ve added some pictures of him) I got him when he was a little kitten and I was just a teenager, 20 years later and I’ve had to say goodbye to a very old friend 🖤
Likes
82
Share
Harvest day, you’d think I’d be excited and I was until last night. I’ve had to have my oldest Cat put down due to health reason 😿 I almost can’t be bothered to do this update, but here I am 🤦‍♂️🤷‍♂️ it’s only one more entry. I harvested this plant at day 58 of flower, it feels like she matured and finished quite fast, always a good trait. Her buds are rock solid to the touch and almost wet with trichomes, if that makes sense?! I took some pictures just prior to harvesting her. She’s now hanging on a peg hanger in my drying tent, cut into individual branches. She took barely any time all all to trim, she’s got a high bud to leaf ratio and everything I cut off will be dried, frozen and sifted to make Rosin. No waste at all. I aim to dry between 10-14 days, I generally keep the RH around 55% and the temp fluctuates around 18*C. She’s been an easy plant to grow and I’d recommend these genetics, In House have really outdone themselves with this one! I don’t usually do this, but I’m dedicating this grow to my late Cat Poochim. (I’ve added some pictures of him) I got him when he was a little kitten and I was just a teenager, 20 years later and I’ve had to say goodbye to a very old friend 🖤
1
24
Share
NOTES: This will be the last week of flowering. Just a couple more days of flushing with the Final Solution and I'll harvest all of them before the end of the week. Then I'll hang them to dry in the same growing tent and start the drying and defoliating process. Overall everything looks pretty good and no bigger problems have occurred. Day113 (6.2.) Today is 64th day of flowering and 13th day of flushing. Day114 (7.2.) After my lights turn off today at around midnight, I'll take the timer and lights off completely and leave the plants in total dark for a day or so before cutting them off. Day115 (8.2.) Day116 (9.2.) Finally! Cutting the plants down this afternoon and hanging them to dry. So, the overall grow time from seed to harvest was 116days with 67days of flowering, with total darkness for the last 36hours before harvest.
Likes
24
Share
NOTES: This will be the last week of flowering. Just a couple more days of flushing with the Final Solution and I'll harvest all of them before the end of the week. Then I'll hang them to dry in the same growing tent and start the drying and defoliating process. Overall everything looks pretty good and no bigger problems have occurred. Day113 (6.2.) Today is 64th day of flowering and 13th day of flushing. Day114 (7.2.) After my lights turn off today at around midnight, I'll take the timer and lights off completely and leave the plants in total dark for a day or so before cutting them off. Day115 (8.2.) Day116 (9.2.) Finally! Cutting the plants down this afternoon and hanging them to dry. So, the overall grow time from seed to harvest was 116days with 67days of flowering, with total darkness for the last 36hours before harvest.
3
5
Share
I had alot of issues with my environment, tools, auto-watering, So I did alot of mistakes, but I could take some clones that I'll use in a next run but I wont create a new diary for it. 👋👋👋
Cherry X · Custom Breeder & Strain
Fission 300W · Custom
Vega 80x80 | Flora 120x 120 · Custom
Plant Prod 07-11-27 ·
YaraTera Calcium Nitrate 15-0-0 ·
Basafer Plus Ferro 6% ·
Plant Prod 07-11-27 ·
YaraTera Calcium Nitrate 15-0-0 ·
Basafer Plus Ferro 6% ·
Plant Prod 07-11-27 ·
YaraTera Calcium Nitrate 15-0-0 ·
Basafer Plus Ferro 6% ·
Plant Prod 07-11-27 ·
YaraTera Calcium Nitrate 15-0-0 ·
Basafer Plus Ferro 6% ·
Plant Prod 07-11-27 ·
YaraTera Calcium Nitrate 15-0-0 ·
Basafer Plus Ferro 6% ·
Magnesium Sulfate ·
Magnesium Sulfate ·
Plant Prod 07-11-27 ·
YaraTera Calcium Nitrate 15-0-0 ·
Basafer Plus Ferro 6% ·
Magnesium Sulfate ·
Plant Prod 07-11-27 ·
YaraTera Calcium Nitrate 15-0-0 ·
Basafer Plus Ferro 6% ·
Magnesium Sulfate ·
Plant Prod 07-11-27 ·
YaraTera Calcium Nitrate 15-0-0 ·
Basafer Plus Ferro 6% ·
Magnesium Sulfate ·
Plant Prod 07-11-27 ·
YaraTera Calcium Nitrate 15-0-0 ·
Basafer Plus Ferro 6% ·
Magnesium Sulfate ·
Plant Prod 07-11-27 ·
YaraTera Calcium Nitrate 15-0-0 ·
Basafer Plus Ferro 6% ·
Magnesium Sulfate ·
Plant Prod 07-11-27 ·
YaraTera Calcium Nitrate 15-0-0 ·
Basafer Plus Ferro 6% ·
Magnesium Sulfate ·
Plant Prod 07-11-27 ·
YaraTera Calcium Nitrate 15-0-0 ·
Basafer Plus Ferro 6% ·
Magnesium Sulfate ·
Plant Prod 07-11-27 ·
YaraTera Calcium Nitrate 15-0-0 ·
Basafer Plus Ferro 6% ·
Magnesium Sulfate ·
Plant Prod 07-11-27 ·
YaraTera Calcium Nitrate 15-0-0 ·
Basafer Plus Ferro 6% ·
Magnesium Sulfate ·
Calcium Chloride ·
Monopotassium phosphate ·
Plant Prod 07-11-27 ·
YaraTera Calcium Nitrate 15-0-0 ·
Basafer Plus Ferro 6% ·
Magnesium Sulfate ·
Monopotassium phosphate ·
Plant Prod 07-11-27 ·
YaraTera Calcium Nitrate 15-0-0 ·
Basafer Plus Ferro 6% ·
Magnesium Sulfate ·
Calcium Chloride ·
Monopotassium phosphate ·
Plant Prod 07-11-27 ·
YaraTera Calcium Nitrate 15-0-0 ·
Basafer Plus Ferro 6% ·
Magnesium Sulfate ·
Monopotassium phosphate ·
Plant Prod 07-11-27 ·
YaraTera Calcium Nitrate 15-0-0 ·
Basafer Plus Ferro 6% ·
Magnesium Sulfate ·
Monopotassium phosphate ·
Likes
8
Share
1
7
Share
@Adam22
Follow
Lefty was dropped during veg that explains why she looks a few days behind the other i damaged a high fan leaf in about week 5 of veg and now I know what effect it has so not to do it again! Started on pk13 two days ago just a video update for now 😋
Likes
43
Share
Venerdì 2 febbraio facciamo un bel flush, svuotiamo il serbatoio cambiando acqua, partiamo da 50 lt di acqua demineralizzata Aggiungo 200 ml di cannaflush e lascio girare per 24h Sabato 3 febbraio svuoto il serbatoio con la soluzione cannafluh e metto in circolo altri 50 lt di sola acqua osmotica per altre 24h. Domenica 4 febbraio svuoto nuovamente i serbatoi di sola acqua, e riempiamo di nuovo con 75 lt di acqua e questa volta Aggiungiamo i soliti nostri nutrienti: 135 grow 90 micro 45 bloom 75 sensizym 75 calmag 75 rhino skin 75 nirvana 75 bud candy Ec Ph6.2
Likes
62
Share
Hello and welcome to week 3 of this Diary 🙌🏼, Last week I had a little mess while transplanting but the girls seem to be thriving. It‘s day 12 since they came out and i‘m impressed how they are growing already with low humidity and a DLI of around 25 so i think they‘ve arrived at the Vegetationsphase. I would love to push them harder but I don‘t have a real CO2 system in place. You see, my lamp gets really hot at 100% and Plants have something called „photorespiration“ when the leaves get too hot. They confuse CO2 with oxigen and use up energy whith the wrong „gas“. So the optimal temperature shifts when C02 ist added. Not to mention you get up to 30% more yield. I already got some things from amazon delivered to me next week so if you want to follow along you can see me attempt to put it in place and hopefully make it work. I‘m planing to make the whole growspace airtight (but still excesseble) and build my own coolingsystem and dehydration system WIHTHOUT getting new air in to prevent the CO2 from comming out. I think I will finish it by friday and post an update. I will keep it short this time and hope you have a great day, growmies 👍🏻 Update: the Co2 system is in place and it seems that just by making the space Air tight, the CO2 bag in it is enough to highten the CO2 in the tent to 1130! And it‘s still going up. It‘s now actually pretty hard to get it out 😭 I have to rethink the temperature settings because now they can take it. I read that they can take up too 3000 ppm Co2 but we‘ll see. My lights aren‘t that strong and imm not getting a new one. Very important to keep the tent cool and dehydrated tho without etting rid of the CO2 so I bought 6 packeges of dehydrating subrtate in bags and a cooling system wich dehydrates too obviously. I also bought a CO2 reactor, wich can be refilled. It‘s a reaction based off of 700 grams of bakingsoda and 700 grams of Citric acid (it‘s ment for aquariums but who cares). The CO2 device sets a target and shuts on and off when it‘s off by 1/2 of the Zone I chose. It detects when the light turn off and shuts down too. Rn it‘s not even turning on because of the CO2 bag. So if you have one of those, can make your tent Air toght and you can build yourself a cooling sytem you could have a high Co2 tent with less than 100€$. But since one Exhale bag is pretty expensive I figgured investing in a reactor such as this is much cheaper in the long run. The CO2 controller was epensive tho. Tomorrow i‘m feeding the plants again 1100 EC this time (it‘s been 2 days) and i‘m going to keep posting updates. C ya soon 👌🏻 Update: since day 15 i have the tent in 800 ppm CO2, 30°C, ≈50% humidity, 25.000 Lux (≈600ppfd).