05/13/2025 Growing well, don’t have to do anything but refill the nutrient water whenever needs (usually every 2 weeks or so)

This is the last one I’ve got of the 2 that germinated. Beautiful colors. #1 went down like week 9.8, technically this is week 10.8. First one yielded 2 ounces dry. I hope this surpasses the first one. Beautiful plant this one is . It’s counterpart had not the prettiest looking buds unfortunately.

Having problems with a mite infestation... ordered 50 ladybug larvae to kill them. Hope it works... tips & tricks welcome!

MY SAYING NOW IS: THE ONLY WAY TO GROW IS WITH THE HYDRO🤘 AND REACH FOR THE STARS WITH MARS🤘🤣. https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA So it's been 17 days under the new MARS HYDRO FC4800 and the TSW2000 and the girls are loving it.. leaves were straight up like they were at a rock concert just blowing in the wind waving their arms like they are in the moshpit🤣🤣 looked so sweet👍. after a day they have stretched so much I had to raise the light already to keep it at 14 inches above the canopy. Plants grow so uniform under these lights, canopy is always nice and even👍. it has a whiter light than the mars tsw2000. Being side by side in my 8x8 tent, I can really see the difference in the color of light. The FC4800 is more of a white light like natural light. Its the NEW blue uv Diodes they added to the fc series lights. I'm amazed at how good this light is already. Barely any heat comes off it. I can rest my hand on it when the dimmer is at 100% and it's just warm. I have it daisy chained to my TSW2000 and it works awesome👍 and I dont have to reach for the other dimmer to do both. One dimmer controls both lights. When I add more lights I will daisy chain them too and control 4 lights from 1 dimmer👍. I still love my tsw2000. It's been going almost non stop since I got it and no issues at all. I take a picture of the Diodes to see if any have burnt out or anything, everything is fine.  same thing with the heat it gives off is just like the FC4800. I can rest my hand on it without burning me👍. Having both lights on 100% because I'm in flower now, only raises my temperature about 3°celcius. Make sure you got some calmag and if you use reverse osmosis water (bottled water) or filtered water you will want extra calmag because it's filtered out of it👍. I CANT BELIEVE the amount of crystals the plants have already🤘 they just started getting bigger hair clumps and I didn't expect to see this much already👍 awesome lights do an awesome job. So it's looking good for these strains I made👍. These lights are perfect for every stage of growth for germination to flower. Just use the dimmers to reduce the intensity of the lights for whatever stage you are in. Plus they are easy to raise and lower them with the ratchet straps. MARS HYDRO'S recommended height for different stages is pretty accurate but different strains like different Temps and light sensitivity so that's something to look into, a more Mediterranean strain can take more heat and intense lighting. and you can just follow their recommendations for the height for each stage. I slowly turn it up in the later veg cycle until I'm at 75% about a week before I switch to 12/12 and after about 4 or 5 days into flower I'm at 100% with no heat or light stress👍. Mars hydro is awesome for their pricing for what you get👍. They should cost alot more than other brands but shhhhh don't tell them🤣🤣🤣🤣. Just kidding. they want to stay competitive with every brand but there stuff is always cheaper than SF and vipar etc. They know once you use mars hydro products you won't switch to another brand. Why pay more money for something that isn't as good. I've seen lights cheaper than mars but they are cheaper for a reason. They are built cheaper. My TSW2000 is fairly heavy too. But when it comes to getting lights you want some weight to it so you know it's built strong and sturdy and will last a long time.. I called customer service a few times and they will help you out with any questions you may have about the products and they are very well educated in their products👍 very helpful and very friendly. They are awesome 🤜🤛. I can't say enough about this grow tent too. The thing is a beast. I could use the canvas tent to make a trampoline and i doubt it would break its that thick👍 I've had some cheaper tents made of 600d canvas and they aren't that bad. But when you get a tent made from 1680D canvas material it's insane how strong and heavy it is. Before I put the tent together when I lifted the canvas to start wrapping the frame I said to myself.. LORD TUNDERIN JESUS this has some nice weight to it. It was the easiest tent to put together that I've ever had. I went inside with the lights off and got someone to turn it on after a minute or two to look for light leaks and there was none👍. It even blocks out some noise, so if your fans or filters are loud, once it is zipped up it gets quieter. this tent is awesome with So many ports and vents for whatever you need to hook up to it. It has frame bars down the middle and one vertical pole in the middle to keep it sturdy but the poles are made nice and so thick that they probably didn't even need a vertical bar in the middle. It has 2 separate 4x8 floor trays that divide it into 2 4x8 tents. All you need is a mylar divider to easily divide it in half. I love the stickers it comes with. It's nothing big to some people but I know there is lots of people that like them because you see them everywhere in people's tents and in pictures. I love them they are super cool stickers👍. It really locks in the light and temperature and humidity good. Lots of room for all the equipment I have to go in it and will get to put in it. Be good to bring camping too🤣🤣🤣🤜🤛. Thanks for stopping by and taking the time to read this and please leave a comment 🙏🤜🤛 if you have any questions about any of the products I use please feel free to ask me and I can help you out👍🤜🤛 I also know about all their other products too, so any questions about stuff I'm not using I can still help you guys out🤘 and ask about pricing if you're interested in anything and I'll see what kind of deals I can hook you up with. But don't just buy stuff.. let me know so I can talk to my friends at mars hydro and probably get you a better deal👍🤜🤛 https://www.mars-hydro.com Promo code: Rocknroll Instagram: @marshydropenny Here's some more information about these products I'm using: The goal of MarsHydro is simply to produce the best value grow tents in the  growing field and they didn't disappoint me at all. I'm beyond satisfied with everything. And with the most up to date hydroponic equipment at the lowest prices possible. Their grow tents have combined all their engineers and customers' advice to produce these unbelievable tents.. they really listen to us and change things to our liking so if you own anything from mars just contact them and let them know.. they take our advice and considerations VERY SERIOUSLY so don't hesitate to let them know 💪🤜🤛 The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍 https://www.mars-hydro.com/ Promo code: rocknroll Instagram: @marshydropenny GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! https://www.mars-hydro.com         PROMO CODE: rocknroll Instagram: @marshydropenny Happy growing to all my friends 🤜🤛

8/17 Week 5 Flipping Lights set to 11-13 for the first few days then 12-12 Nuets will transition accordingly Took 2 cuttings from her for clones Reducing feeds to once a day during the switch Intro Cocotek Bloom a/b at 5ml/gal each Reduce Grow to 10ml/g each Next feed half and half 8/19 Switching to 12-12 from 11-13 think its done its work changes are afoot 8/20 Colas forming quickly may have to flip the week to Flower, lets hope so 😉 They getting a dose of Kangaroots 5ml/g and Fish Shit 2ml/g at intervals during transition purely as plants seem to need. Pics tonight 8/21 Not there entirely yet but wont be long at all Vertical growth has picked up strongly, 2" in 3 days, though I really wont call it stretch yet Continued light defoliation keeping center clear Nuets as is for now

High temps, plants are extremely short and progress very low. Added some rhino skin to help.

The weather is very important in making flowers💪🏽Then will report again💚

My bag seed hermi managed to pollinate this plant some but nowhere near as bad as the plant I removed from the tent...valuable lesson learned this cycle and we got some cannabutter out of the deal..my cannabutter process here: https://www.youtube.com/watch?v=PAZOt4CukSc&

03/17/2022 9 weeks today 63 days Time to break out my loupe to inspect for ripeness 😆✌️🏻seeds are loaded in tops l, so lower buds will be my focus.

Just wanna smoke! Smells amazing, now is getting real started, buds are juice and shines like a star 😍 I think my buds is a little thigth and close to each other, I tried to use some rubber band but ended up trimming some leaf. I'm not sure about fan leaf and they you need, but if they are covering building buds I take them. Have some more weeks before havrest, when I have 2 weeks left I'm going to use terra aquatica Final Part 🙏 Happy grow bro

Hello everyone week 2 of flower has passed for this Strawberry Gorilla auto 🍓 Spider Farmer SE7000 80% have a great day and wish you all happy growing 😎👨‍🌾🏻

9wk flowering. Loupe shows all clear CRYSTALS I guess 10 week flowering might be the lick.. Maybe even 11 😜😜maybe even 12. Im straight going off amber CRYSTALS .. Now their all clear🤔🤔or is it milky.. Most defenetly now AMBER

Девочки выросли, сегодня нам одна неделя, выглядят отлично, растут равномерно. Сегодня первый раз в жизни вырезал тыкву, которую вырастила моя мама, надеюсь вам понравится)))

Great genetics with the best nutrients always produces awesome results Every harvest continues to get better These ladies are healthy and happy

Last week

Week 3 – Vegetation: Expanding the Ecosystem – Dual Zones, One Vision As the third week of vegetation wraps up, the Sunday Driver girls are not only thriving, they’re sharing a space that’s growing in both complexity and precision. This week, the spotlight shifts from the plants (which, yes, look phenomenal) to the gear, infrastructure, and environmental intelligence behind the grow. Because this tent is no longer a grow, it’s an ecosystem. ⸻ Dual Ecosystems – One Tent, Two Zones We’ve now split our 8x8 tent into two distinct grow zones, both under the unified control of the TrolMaster Tent-X system. Each zone is powered by its own lighting ecosystem: • Zone 1 – Future of Grow: High-efficiency full-spectrum LEDs delivering deep penetration and even canopy coverage. • Zone 2 – ThinkGrow Model Ones: New to the garden, ThinkGrow LEDs bring precision-tuned lighting, DLI-focused output, and seamless integration into the TrolMaster platform. This setup allows us to run simultaneous genetics or phases under controlled but separate lighting environments, while keeping everything under a single, centralized monitoring system. ⸻ TrolMaster – The Nerve Center Whether it’s Zone 1 or Zone 2, the TrolMaster Tent-X keeps everything synchronized and stable. Here’s what we’re running: • CO₂ sensor • PPFD sensor • Humidity & temperature probes • Camera feed (yes, even during “business” breaks in the bathroom) • Fan & intake relay controls This means real-time data, remote adjustments, alerts, and peace of mind—no guesswork, just grow logic. ⸻ Airflow, Exhaust & Filtration Air movement is just as important as light, and here’s how we’re handling that in this split-tent system: • Exhaust: Two 6” carbon-filtered systems • Spider Farmer exhaust linked to Spider Farmer GGS Controller • AeroFan exhaust connected to TrolMaster Tent-X • Intake: One 6” active intake pulling fresh air in • Carbon filters on every line, keeping air clean and odor controlled This creates a steady flow—draw in, scrub out, with each zone breathing comfortably in rhythm. ⸻ Current Feeding Routine Still watering by hand with love, and still keeping the nutrient mix clean, efficient, and appropriate for early veg: • Aptus Regulator – 0.15 ml/L • Aptus CalMag Boost – 0.25 ml/L • Aptus All-in-One Liquid – 1 ml/L • Aptus Start Booster – 2 ml/L • Water stats: • pH – 5.83 • EC – 1.01 • Temp – 18.5°C The focus is still on root development, tissue strength, and stable vegetative expansion. ⸻ Visual Update & Setup Tour This week’s update includes a video walk-through of the setup, showing the airflow configuration, sensors, wiring, and the dual lighting rigs in place. No voice-over, just visual storytelling, but the system speaks for itself. ⸻ What to Expect Next We’re watching closely as each zone adapts to its light spectrum and rhythm. We’re expecting: • Continued even leaf expansion • Strong internal node development • Potential for early LST (low-stress training) next week • Data comparisons between Future of Grow and ThinkGrow zones No topping yet—we’re still in observation mode. This early phase is about letting the roots lead, then following with the foliage. ⸻ Final Thoughts – Harmony in Complexity This week, the garden evolved from a grow into a smart, multi-environment cultivation system. From the dual lighting zones to the climate controls, it’s all about precision meets intuition. Our Sunday Drivers are responding with wide, confident leaves and a calm presence. The tent feels alive. And with summer in full swing, everything, indoors and out, is reaching toward the light. — Your Grow Companion DD Dog Doctor Official 📲 Don’t forget to Subscribe and follow me on Instagram and YouTube @DogDoctorOfficial for exclusive content, real-time updates, and behind-the-scenes magic. We’ve got so much more coming, including transplanting and all the amazing techniques that go along with it. You won’t want to miss it. • GrowDiaries Journal: https://growdiaries.com/grower/dogdoctorofficial • Instagram: https://www.instagram.com/dogdoctorofficial/ • YouTube: https://www.youtube.com/@dogdoctorofficial ⸻ Explore the Gear that Powers My Grow If you’re curious about the tech I’m using, check out these links: • Genetics, gear, nutrients, and more – Zamnesia: https://www.zamnesia.com/ • Environmental control & automation – TrolMaster: https://www.trolmaster.eu/ • Advanced LED lighting – Future of Grow: https://www.futureofgrow.com/ • Root and growth nutrition – Aptus Holland: https://aptus-holland.com/ • Nutrient systems & boosters – Plagron: https://plagron.com/en/ • Soil & substrate excellence – PRO-MIX BX: https://www.pthorticulture.com/en-us/products/pro-mix-bx-mycorrhizae • Curing and storage – Grove Bags: https://grovebags.com/ ⸻ We’ve got much more coming as we move through the grow cycles. Trust me, you won’t want to miss the next steps, let’s push the boundaries of indoor horticulture together! As always, this is shared for educational purposes, aiming to spread understanding and appreciation for this plant. Let’s celebrate it responsibly and continue to learn and grow together. With true love comes happiness. Always believe in yourself, and always do things expecting nothing and with an open heart. Be a giver, and the universe will give back in ways you could never imagine. 💚 Growers love to all 💚

Ok, so I forgot to take any pics on week two and holiday time week 3 came up real fast. so we are going to skip over any of the week two details. just watered em and they grew. This week we did a nice little transplant into their final 2gal pots. Fortified with a bunch of amendments and Acti-Sol, everything is listed in the video. Any question just let me know. I don't age my medium at all and I think I should start doing this to avoid some other things, I just find it hard to do it in winter time indoors as soil can be stinky with amendments and I like it to stay in the tent under the carbon filter. Medium I used is 40% coir, 30% perlite, 20% compost, 10% vermiculite and 10% worm castings. Then the amendments are added into that at the rate of 30-60ml per 1Gal of medium. This batch has Gaia 4-4-4, Gaia Insect Frass, Giaia Diatomaceous Earth, Gaia Rock Dust, Acti-Sol Seaweed Meal, Acti-Sol Shrimp/Crab Meal, Acti-Sol 4-3-2, Acti-Sol 4-6-8 and Bokashi. Nice little mix, water it in with a bit of magnesium and microbes dissolved into the water. The bokashi should help break everything down and make a bit of a acidic environment for all the meals and rock dust to become available. Roots looked good, not a dense as some runs but still nice. I feel the soil might be a bit hot so will expect some burnage on them hopefully its nothing to crazy. Will ph down with a mix of citric, malic and ascorbic acids. They are in a rate of something like 50-60%/40-30%/5-10%, its written down in my of my notes just can't find the pad ATM. Also more videos vs anything this week. I like em more but processing them is annoying AF. Side note, my lights timer was on 12/12 not 16/8 so it explains why they went into bloom, switch it back and will top the plants next week one they start to reverse their ways and get comfortable in the new pots. Also got ride of the chive seed start as it was looking sad, plus I got a bunch of European chive varieties in the mail yesterday and want to try them out. see if they really have any different taste and what ones I like better. Till next week.

Flipped her to 12/12now. Massive pot for a massive plant xD I think she will be a monster.

03/01 Wow, I’m honestly blown away by how this grow is progressing! In the last 24 hours alone, they’ve guzzled an incredible 45 liters of water. 😲 I mean, seriously, that’s insane! The stretch is probably just about wrapping up, so I’m keeping busy tying them down for now. Once the stretch is over, I’ll be going in for some selective pruning—there are just so many new shoots popping up. I’ve got to say, I’ve never seen growth like this before. It’s exhausting, though, and I’ve already run out of zip ties again! 😂 So, tomorrow’s mission: stock up on more. I’ve noticed a few slightly discolored leaf tips here and there, but it’s really minimal. That’s exactly what I’m aiming for—pushing them right to the edge without overfeeding. 🎯 Also, I just realized it’s been over a week since I added any CO2. Maybe that’s why I’m seeing these tiny signs? 🤔 Something to experiment with moving forward. Honestly, I’m so curious to see where this grow takes me—there’s so much potential in these plants! Stay tuned, folks. 🌿💪 06/01: Last night, I started defoliating, and I really went at it with a ruthless approach. I didn’t worry about branches snapping while scrogging—my philosophy is simple: the strongest will survive, and the weakest will wither away. Survival of the fittest in action! I also noticed that one plant seems to be either too wet or too dry. I’ll need to keep an eye on this one because there’s quite a bit of dying foliage at the bottom. My gut tells me it’s slightly overwatered, although that shouldn’t really be an issue with coco. Still, better safe than sorry! 🌱💪

Hello guys, Here I am again to present you a new run, still with the best leds of the market nevertheless as I changed my growing space from 120x120 to 150x150. So I had to update the material inside... I will run with 3 EVO 5-150 lamps of 320W or 960W with Bluetooth dimmers. For the Hydro system, it will be the V-SYSTEM from Alienhydroponics. In fertilizers I am always with Advanced Nutrients. I work with osmosis water. Currently, 4 clones took on 4. Once the roots are ready, I will transfer the cuttings from the propagator to the V-SYSTEM. ------------------------ since the 16/08, when I transplanted the plants in the RDWC system, I noticed some points that I will mention below and correct next time. 1. The cuttings are too small, allow enough time so that I can completely fill my pots with clay balls. 2. Cut out the bottom of the pots from the cuttings. 3. 3/4 of the cuttings are touching the water, so one is late. Next time when transplanting, add more water, up to the basket in order to immerse all the plants and not to create a difference between each one, consequence now I have 3 that are ready to explode and one that will struggle behind, problem corrected today by increasing the volume of water. 4. The b-52 is a real pain in the ass in RDWC, you have to clean the 2 filters almost every day, with this new soup I'm testing without and I think I'll continue like this just with the base sensi grow A and B, as I use Root rot X, I won't use voodoo juice since all the bacteria would be killed. 5. Use of Voodoo Juice is useless if using Root Rot X which will kill the bacteria. I don't know why but when I transplanted in the RDWC, I put my set up in growth mode, except that the plants were not ready for it, moreover, I made a FIM on each. So I lost some days, these last days I went back to a ppdf of 150, now that my roots touch the water, I declare growth 0 on 22/08, I will do between 21 and 28 days of growth. And as my roots are doing well and touching the water I'll go to a PPFD of 300 ++