Likes
12
Share
Had an awesome visit from Sebastian and Chubbs from 420fastbuds! They really seemed to like the smell of these ladies right here. It was an absolute pleasure.
Likes
8
Share
Sunday, May 29, 2022 Plant #3 is stretching away by a foot over Plant #2. Both Plants looking well but displaying different leaf behaviour (particularly of the upper growth). When well watered, in full sun, Plant # 2 has perky, praying leaves that go down somewhat at night. In the same conditions, Plant #3 has droopy leaves that get even more tucked in at night. It was only from feeling the strong turgidity of the Plant #3 leaves when under good water and comparing them to Plant #2 that I accepted that it was ok and that's just how it wears its' clothes. The red and white pistils are filling out from top to bottom on all stems on Plant #2. Even though it's not as tall as its' neighbour, the six main stems on plant #2 seem proportional to, hopefully, support nice thick colas. Plant #3 is furring out much slower and though I am happy for the height, I am concerned the stems aren't thick enough to support much weight.
Likes
5
Share
The last week of edge for these beautiful ladies and then we can flip
Likes
8
Share
Alright about a week and a half out from chop. I was able to keep my dry tent dialed in at around 65 deg and about 60-58% RH. Since I did a bit of a wet trim I was able to get these gals dried in about 7-10 days. Ran out of steam to trim and move to cure at once so Ive been trimming up branches as I can this week. Final yield is just over 7 oz of flower, I’m also going to experiment with some sugar leaf trim for a bake. Overall, very proud of this grow! Spice girls you did good.
Likes
20
Share
The progress is visible looking at the timelapse video, which I'm happy for, considering the events of last week. It's disappointing though to see the huge difference in size between the Criticals and the GZkitzs, the Criticals are 3 times larger.
Likes
27
Share
Ok so this week I did a defoliation and a tigh down too the netting , I really was not planning on doing such a big defoliation but the leafs became thick and dense and there was almost no light penitration down too the lower branches of the plant , so she is opened right up now and the humidity and temperature has dropped loads and the air is moving alot better around the leaves and branches , I will not take anything more off her now , I have also added Cal mag too the nutrients for this week only , she is well into pre flower now but the stretch has not yet started so I figured it's no or never too defoliate and tigh them down , I am very happy with them so far and being new too all this it's all very exciting , Thanks for looking :)
Likes
21
Share
@Whitebelt
Follow
Week 8 - second week of flower One plant is much smaller - still not confident on sex of any of them ... maybe that small one is a male - I’m guessing they’re all female tho. Either way i may need to slaughter that little guy - the other plants are just overtaking the tent - might not be worth keeping that little one in there. Update 6/5/19 - I’ll take some updated pics tomorrow - I’m 95% sure I have FOUR out of four female plants. Just picked up some yucca to try - and I got some more led hangers so maybe I’ll upgrade the lights today - the rapidLED far red flower initiator isn’t coming until Wednesday unfortunately but I have two more SolStix I could add. Update 6/5/19 - far red flower initiator and the two (now 4) solstix are installed - I need to make a simple aluminum frame - maybe this weekend Picked up some 29% H202 to clean the rez tank and pumps and filter etc (not to put in the nutes for the plants tho!) Got a better air pump and airstone for the rez. New Vivosun oscillating fan - wtf!? Made for grow tents but can’t turn without stopping on the sides of the tent!? - I emailed them maybe it’s defective.
Likes
198
Share
@DevilsBud
Follow
New week in supported marshydro grow FLOWERING TIME last run i did it under a TS-1000 But this time it will be under the amazing FC-4800 i am so excited to boost up everything and see what i can approve from last run 🤘🏻🤘🏻 Starting to put them in 12/12 schedule they have bin put in darkness for 12 hours and now hopefully let the flowering Begin fucking love this stage 🤘🏻😎🤘🏻 27/10/21 All plants Transplanted in 11L fabric pots added 5gram Easy Roots - Mycorrhiza Mix to soil Have some ideas for my grow tent I have my plants on hard plastic pallet And i ordered plateau with ball bearing So i can turn my plants around with one spin 😎 basically a huge turntable wikiwki Will be updated soon happy growings Growmies visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter
Likes
2
Share
Probably a bit early but one was ready and I need a smoke haha. Enjoyed this grow diary first one. Will get better with the next ones haha
Likes
8
Share
Die 5. Woche und wie erwartet alle mega saftig und starke Stämme noiden Blätter
Processing
Likes
5
Share
Pistols, Pistols, Pistols, seen the flowers began to develop, she stretched lot last night, feb7-8 ir video uploaded. Took all the excess leaves off my girl
Processing
Likes
56
Share
@Island
Follow
Week 6 - Week without surprises. No-till cycle working well, watering only with water, but note that the companion plants still grow crooked. Soon the soil still shows signs of excesses, I believe that in the next cycles these excesses will be fixed. Hugz from Brazil.
Likes
142
Share
Hey everyone :-). The last plants were also placed in the bloom chamber kammer. Everyone has made great progress this week 🙏🏻. There is not much to say about this week, I think videos and pictures say more like words 🙈😎. I wish you all a good start into the week :-) Stay healthy and let it grow 🙏🏻👍
Likes
29
Share
@starke
Follow
Week 16 Day 109 and 62 in Flower today 😍 Their Mama went into dark on Day 62 of Flower, so I checked their trichomes today. They all look nearly finished, at least the top buds are all good to go. I will wait another day or two and then they will go into darkness. Next weekend will be a good time to harvest yeay ☀️ They have been fed a little water every two days for the last couple of days. Humidity has dropped quite a bit in the tent but it's still hot. Luckily temperatures are going down a little bit. Can't wait for my little rainbows 🌈 ❤️ Day 111 and 64 in Flower, one last day with light 😍 Added some trich shots of one the clones. Good call to send them into darkness. And guys, the colours aaaaaaaaaaaaah 😍😍😍
Likes
9
Share
Awh crap - I think I’ve pushed it too far 🤣 after topping off 31 tops, the plant responded TERRIBLY this week Leaves are telling me some sort of nutrient issue? Been trying to make up for it in nutrients but honestly I don’t know how much is too much or little? ALSO it’s still in a 1 gallon lmao - any tips?? What could we be seeing here?
Processing
Likes
5
Share
@Mrg7667
Follow
Smells like Rubber bands coated in a berry sugar or berry sryup very interesting on the nose! Harvested day 67 ish maybe a couple more hard ot tell outdoor Split the harvest into drying buds and some to made into fresh frozen hash. i can dry weigh the fresh frozen buds and put that weight in the wet section and i will put the to smoke buds in the dry weight section so total between the two will be the whole plant Drying was a big mishap got condensation around day 10 of drying and it caused some mold 🤦‍♂️ right around the time i was going to cure! Found a peroxide soak that ill post butt it seemed to take off all the mold without affecting tricomb heads! Had to re dry for another week afterward i feel like the re dry maybe messed with the terps because it definitely never got the smell back like i thought but who knows slmost 3 weeks into cure coukd get better but doubt it
Likes
Comments
Share
Likes
16
Share
@willertex
Follow
Havested about 90 days after seed posed. She is a kind of giant: about 1.8 Kg of buds and branches from only one plant. The buds seems a little bit dry. I hope this will be not a problem after cure.
Likes
42
Share
@JBoBz
Follow
Growing the Original Glue from GG Strain was an honor for me! I loved this growth, from the first two little leafs to the hervest I was looking at them all the time because of the different structures compared with my previous and present experiences! I'm glad to share this diary with all of you stoners! Happy growing to everyone! 💚🦍💚