Likes
Comments
Share
@Nune2021
Follow
Hey bin mal gespannt obwohl ich nicht all zu viel erwarte der Wuchs bis jetz hält sich in Grenzen aber ich denke durch den Kleinen Topf ist das Wuchs Wachstum stark eingeschränkt Aber mal sehen ich lass mich überraschen 😂
Likes
48
Share
Tangie'Matic growing nicely, as expected. Really excited about growing this stain again at the end of my growing cycle. Tangie'Matic was one of the first strains I grew last fall and I really liked the results. But I'm hoping for even better results now with a few grows under my belt. I feel like I've learned a lot over the past few months. Hopefully it pays off here.👍
Likes
38
Share
Utopia Haze is a rare heavily sativa dominant hybrid (90% sativa/10% indica) strain created through back crossing Brazilian Sativa strains. This tasty little bud took home 1st Place for Best Sativa in the 2008 High Times’ Cannabis Cup and for good reason – with its potent 18-22% average THC level and long lasting cerebral effects, Utopia Haze is one powerhouse smoke. The Utopia Haze high comes on soon after you finish your first toke, hitting you with a strong cerebral lift that infuses you with a sense of hazy relaxation. Type: Feminised/Photoperiod Cultivation: Indoor/Outdoor Flowering Time (days): 70-75 Indoor Yield (g): Up to 650 Feminised Outdoor Harvest Month: October Feminised Outdoor Harvest Month Week: 3rd-4th week Aroma: Citrus, Woody, Pungent, Mint Effect: Cerebral Lift, Hazy Relaxation, Sleepy Welcome Everyone to the Final Entry of my Utopia Haze Grow ! There is so much to discuss ! I have been extremely busy as of late trying to get this Harvest together, but i am happy to have it here for you now ! I Seriously under estimated the amount of time, help from others, and my own necessary skills to pull this off.. and i still kind of screwed it up lol ! But its worth noting i have never actually done this before and trying to document it during....was extremely hard. It is next to impossible to work an iPhone with rubber gloves on ! First I want to discuss everything step by step so before you jump straight into the comments on how the end product is so small in "quantity" Rest assured i am happy with its"quality"...and thats all that matters to me because Life is a journey not a destination! and i have learned so much from this grow that I couldn't be any happy even if i messed some things up :) But at the very least I hope you read through this entry in its entirety with an open mind and focus more on the process, rather than just the outcome! I ran out of Ice & i was only able to wash three times..(normally I've heard you should go sometimes 5-6 washes) Preparation is Key & things will be much better next round :) Photos 1-22 These are pretty self explanatory but for those of you just tuning in now.. this is what happens to a very happy plant when you don't have the necessary tools to monitor key components of growing cannabis.. Ph, as well as EC levels play a very key role in the outcome of your grow lol that being said I was just able to save this plant by purchasing both tools but that doesn't mean the plant didn't suffer because of the prior events.. This was a Huge reason behind me choosing to turn this harvest into what i would consider "Solventless Hash Rosin" from "Ice water extracted Bubble hash". Pictures 23 The idea here is the process of using "fresh Frozen Cannabis" this has been discussed many a time online on such sites as instagram and here on grow diaries as well.. I personally have Never tried the process so i decided to try it out and make a judgement for myself.. Video 24 The Cannabis has now been in the freezer for 72 hours making it very well frozen.. as you can tell i struggled getting it all into the 25u Screen Wash Bag. One thing of note i would do differently is i will de-stem my next batch as i also believe this played a part in the amount of plant matter that escaped through the sieves. Photo/Video's 25-28 The idea here is "ice water Seiving" & especially with the bags that I am using here that are only have screen material on the bottom portion of the bag it is very important to have spaces in-between the screens to allow the water to pass directly through the screens into the bottom bucket with the least amount of resistance.. because the hash is so extremely temperature dependant if it gets warm on the side of the bag.. it will stick there and not make it to the bottom to become use able product.. 29 You do not need to use as much Ice as i used here lol... the idea is to keep everything very cold..i certainly achieved that but at the sacrifice of using so much that i ended up grinding product and producing "contaminants" but in the end they are just plant matter that i would be smoking when i rolled up my joint either way so.. I'm not super disappointed.. But it should be noted that what you want to achieve here is a Layering effect where you have the wash bag between two small layers of ice while the "water current" washes the Trichomes away allowing them to be separated by the screens setup below :) Before Starting the machine you should allow some time (i.e.;10-12minutes pre soak to allow the product to become saturated) before the first cycle. By video 32 I have just ran out of ice lol.. Video 33-34 Here I have a tip for you.. to separate the screens that you sieve through.. cut 5 gallon buckets to stretch them across nice and tight.. it'll make scooping your Bubble that much easier ! i learned this from the many "Frenchy" videos I have watched :) Picture 35 Here in lays the problem for most people.. drying your hash without loosing vast amounts of "Terpenes" whilst also stay ever vigilant against mold ! Thanks to all those videos I've watched on youtube.. id like to think this was one of my most successful parts of this process.. Things to Note; Terpenes start to seriously evaporate at temperatures 68F or 20C you need to stay as cold as possible whilst bringing the Relative Humidity in the space down into the 40-30% to stay away from that nasty mold ! I used my cold storage room in the basement.. with a dehumidifier running to keep the space at 45% RH & staying at a constant 15c. All while spreading the hash as thin as possible across parchment paper, on top of the white screens with a fan moving air across both sides of the paper. Pictures 36-38 These are some macros i took in the middle of my drying session I fell in love with the colour. Yes i know the black spots are plant material but they will get caught when i bag the hash & squish the oil out. Thing to Note; at this stage it is important to ensure you 'micro plane" the hash down as fine as you can whilst staying weary of the temperature... any "chunks" will hold pockets of moisture.. that lead to potential problems..ie; mold ... Picture/Video 39-41 Successfully planed bubble hash ready to be bagged and Squished ! Picture 42 Ive decided to follow Pedro.. from Pedros Grow Room and double bag to be on the safe side so i don't have any blow outs. So thats One 25u bag inside one 160u bag ! :) Pictures 43 This is almost 3 grams of the bubble hash from above, already melting in the bag.. this is where i ran into trouble again lol things started getting to warm in the house and i was only able to get one of the three squish's i did on video :( things started getting sticky. Picture 44 This is basically just a photo of the equipment I'm using; 3x5 LowTemp Cage in the frame I built myself, with a 20Ton bottle jack. Something to note here is this is an older Lowtemp model with only a single heating zone which is which i have it closed here heating Both sides of the press :) As well as the importance of having adequate pressure on your plates.. my rig is very overkill for the size of hash bags..lol Video 45 Here is the lovely press video.. its didn't quite work the way i wanted either lol my directional folding wasn't quite tight enough for a big "drip" :) &the Press was set to 65°c Photo's 46-50 are pretty self explanatory :) I had a blow out.. but still managed to pull an 80% return from the hash once squished...& yes it tasted amazing :) Was it worth it in the end... that could be debated.. for some..i understand..its not your thing, but for those of us that are interested in making our own concentrates.. free from Solvents... I wouldn't make it any other way :) If even ONE of you reading this diary finds it helpful to reference for ANYTHING.....even if its "what not to do" ill consider it a success ! Thanks again for tagging along on this garden adventure.. its been one heck of a journey ! Much Love from B.C. Canada, Until Next time, Cariboo
Likes
11
Share
Wasser rein und wachsen lassen mehr passiert hier gerade nicht mehr.
Likes
3
Share
N'hésitez pas à me contacter si vous avez des questions! Pour préparer votre solution, dans votre réservoir ou arrosoir : Mettre en premier la base (Iguana) Ensuite Ancient Earth Et enfin les bactéries ASSUREZ-VOUS D'UTILISER UNE EAU DE BONNE QUALITE (EC < 0,2) POUR DE MEILLEURS RESULTATS. J'utilise un substrat non enrichi pour permettre le meilleur départ à mes plantes. Il s'agit du Promix de Plagron, il a une EC proche de 0, c'est pour cette raison que je commence les engrais assez fort dès le début. Les plantes sont très gourmande sous LED haute intensité et l'enracinement est rapide. J'arrose tous les 3 jours environ avec 2 arrosages à l'engrais et 1 à l'eau par semaine. Je n'attend pas que le substrat sèche complétement sinon ça réduit l'efficacité de l'arrosage, ça détruit la faune et éventuellement facilite la cristallisation des minéraux. Au niveau du volume d'arrosage, il faut prendre en compte 1/3 de la taille du pot. Pour un pot de 1L je vais donc arroser environ 300ml. Pour un Pot de 10L je vais arroser environ 3L. Il est important d'arroser doucement pour éviter que l'eau ne coule tout de suite au fond. Il est important d'avoir au moins 15% de drain pour s'assurer d'évacuer tous les nutriments non consommé et faire la place aux nouveaux. IL EST PRIMORDIALE D'EVACUER L'EAU AU FOND DES COUPELLES, c'est une eau qui est chargée en nutriments non consommé et on ne veut pas qu'elle remonte dans les pots car cela risquerait de créer des blocages. Au niveau de la technique de taille de formation, je réalise tout de suite une FIM que je reproduirai dès que l'apex aura repoussé. La première FIM est la plus longue mais les suivantes sont très rapide car la plante s'habitue à la technique et cela la stress beaucoup moins. En général il faut reproduire la FIM tous les 3 à 4 jours en fonction de la vigueur. C'est une technique très facile à mettre en œuvre et ne demande aucun matériel. C'est aussi la plus rapide pour obtenir des buissons. N'hésitez pas à me contacter si vous avez des questions concernant la FIM! Je retire également les feuilles supérieur (pas toute pour éviter de ralentir la plante) qui cache les secondaires pour augmenter l'efficacité de la FIM sur la croissance des secondaires.
Likes
13
Share
@knicko
Follow
Auf der Waage im getrockneten Zustand waren es 130g somit habe ich mir den Fixkosten ein €/g von 2.55€/g das finde ich nicht schlecht
Likes
12
Share
In general, I liked growing this variety, the only thing is a lot of small leaves, it is not very convenient to cut, but the colas are very dense and weigh well, there are also many small stepsons, although I cleaned up during unnecessary time, powdery mildew appeared after the rain, which is difficult get rid of the large number of leaves on the plant, and it's very good)
Likes
7
Share
@RizlaZA
Follow
2 rez top ups last week and a fully change today. Girls are thirsty and starting to really full out which is exciting me beyond examine. WG 1 and the Haze 2 are some of the best trees I've grown. The Wedding Gelato strain is really easy to grow and to be honest hasn't needed much from me apart from some LST and defoliation in weeks 1 and 3 of flower. Smelling soo good and sticky as hell, definitely going to make bubbke hash from the sugar leaf and press that shit.
Likes
175
Share
Day 29 Flower (Day 71) Woohoo! First day of week five of flower and an easy day at that. I just gave the right girl 3 liters of pH 6.2 water and took some pics. I'm still experimenting with bud photography. This time with a tripod but still no additional lights. I also need to take the pics when the lights are off as the flowers look funky under the LEDs. The right girl is slowly starting to bulk up, but the left girl is lagging. That is no wonder, though, considering that she has had much less light due to those space issues. Also, there's a huge quality difference between the lights in each tent. So I'm looking forward to comparing the bud quality that each tent will generate. Day 30 Flower (Day 72) It slipped my mind, but it's been over two weeks since I gave the girls nematodes to get rid of the gnats. As always, the nemos did their job quickly and effectively, and I haven't seen any gnats since. However, to ensure that they stayed gone, I did a second treatment today, mixed up 10 million nemos into 6 liters of water, and gave each girl half at pH 6.6. Day 31 Flower (Day 73) Chill day. I just gave the right girl 3 liters of pH 6.5 water and cut some clones from her. She is deep in flower so I'll try to monster-crop her. Never tried that before but have heard that it creates some really bushy plants. As she already is bushy I'm curious to see how bushy a monster-cropped clone of her will be. She had a few low branches that I left during lollipopping for this reason and I cut four of them with a sterile razor blade, then scraped the lower part of the stem and dipped them in Clonex. They're now sitting in the window with a small LED spot to make sure that they have enough light to re-veg. Day 32 Flower (Day 74) I know that I got a new tent for my left girl only a few days ago, but I decided to upgrade to give her a bit more space. I went to my local grow store today and picked up a tent made by the same company as my main tent (UndrCovrLab). This new tent is also made specifically for my wardrobe, maximizing the available space. I went from a tiny 40x40 cm tent to a "massive" 75x45 cm tent. Still very small but almost 2x bigger. Woohoo! The left girl was squeezed into the 40x40 tent for so long that I had to use some LST to spread her out and increase light penetration now when she has some more breathing room. Speaking of lights, my small ViparSpectra is a bit underpowered now in this larger space, so now I have to consider upgrading that as well. The simplest solution would be to get another ViparSpectra, and while this little light has been performing well, it lacks UV diodes. I'll look around for options. We have gotten hit by a heatwave here, so now my tents are sweltering. The main tent reached 36 degrees C today at one point :/ Oh well, I cannot do much about it except hope that the heat doesn't stress out the girls too severely. The girls are very thirsty in this heat though, and I gave each 4.5 liters of pH 6.5 water. Day 33 Flower (Day 75) All I did today was to give the right girl 3 liters of pH 5.9 water. A bit low as I used too much pH down and then was too lazy to fix it. Day 34 Flower (Day 76) No idea what happened, but an army of fungus gnats invaded my right girl. It's only four days ago since I watered her with Nematodes against gnats, and there were no gnats at all then. A few days later, it is gnat central in my main tent (the left girl in the other tent has no gnats). It's almost like I didn't give nemos to the plant but instead gave her gnats. Weird as the nemos have always worked great in the past. Now I need to start fighting these annoying little shits. Sigh. I'll give nemos another go, and if they don't work, then I'll use some sand. Worst case scenario, I'll use Neem oil, but I really don't want to go that far. I gave each girl 3 liters of pH 6.5 water, and that was it for today. Day 35 Flower (Day 77) The last day of the fifth week of flower and all is (pretty well) well in the tents. The left girl is 103 cm tall (6 cm increase in a week), and she is lagging quite a bit behind the right girl. She is healthy and quite sticky to the touch, but the flowers still have a lot of fattening up to do. I hope that will speed up now when she has a bit more room to spread out so the light can penetrate the canopy deeper. Getting a more powerful light would also help. When in doubt, add more photons! Someone who doesn't need more photons, though, is the right girl. The top bud has been burnt slightly, and there's light bleaching on a couple of colas as well as on a few fan leaves. I removed the driver from one of the lights and raised the light a bit higher. Every centimeter counts when you're running out of space! The right girl increased another 3 cm this week and is now 123 cm tall. I hope that is it as I'm now completely out of room. The gnat army in my main tent is still going strong. So strong that they have now sent out a small expeditionary force to my small tent and started to colonize the area. Sigh. I Will hit the girls in a day or two with nemos, but today I just put up some yellow sticky traps and gave the right girl 3 liters of pH 6.5 water.
Likes
28
Share
Will be adding a whole lot of notes to the last couple weeks just trying to get all my harvest pictures up :) This one was a pure treat to grow . I am confident using exotic seeds that they can produce some if the world's best cannabis , hands down . They all were bushes , not too much stretch in flower at all . Usually in the first run with a strain I'm just figuring it all out.
Likes
37
Share
Likes
6
Share
@CalGonJim
Follow
9/11 Wed. 12 am Raised lights and the watts. NYC is tall now even after topping. Looking really nice. 5 am lights up to 88W didn't raise the light any higher. 330 pm Got some nice shots of NYC, She is getting tall so I may top her twice and keep the bottom 4 colas, not sure yet. 9/12 12 am good. 2 am light up to 93W and raised 3 clicks. 93 at 8 to 14 inches for the shorter plants should be enough power. 2pm. Spent 6 hours putting in extra dirt and perlite and cut NYC in half!!! She's too tall for this grown, but Im sure I can still do just great with 4 colas well trimmed!! 9/12 11 pm. They are doing good NYC is growing good after 2nd topping. GOAT is doing great. 9/13 12am Cutting NYC in half yesterday worked!!!! She's doing great. GOAT is great too 9/13 12 am. Moved 3 plants that were small into their own tent. 2:30am They are doing better in the new tent with more space. 9/14 4 am.I used 1 gram of Maxibloom Powder and .6ml of purpinator yesterday will keep the mix for a few days 9/15 Looking good light up to 95. Got some nice pics of GOAT forming flowers, her leaves have a peach color the microscope pics are good. had to get a new one.
Likes
6
Share
@Dendegrow
Follow
Apricot Auto – Week 6 of Flower 🍑❄️ Hands down the best terps so far – she smells absolutely amazing! 🤤🌬️ Sweet, fruity and loud – you can smell her before you see her 🍬🍊 And she’s easily the frostiest one of the whole run ❄️✨ Covered in trichomes from top to bottom – this girl’s got it all 😍🔝 Can’t wait to see how she finishes – this one is special! 🔥🌟 Apricot Auto – Blütewoche 6 🍑❄️ Ganz klar die besten Terpene bisher – der Geruch ist einfach unglaublich! 🤤🌬️ Süß, fruchtig und richtig intensiv – man riecht sie, bevor man sie sieht 🍬🍊 Und sie ist mit Abstand die frostigste Sorte im gesamten Run ❄️✨ Von oben bis unten voll mit Trichomen – die Lady hat alles, was man sich wünscht 😍🔝 Ich bin mega gespannt, wie sie sich zum Schluss entwickelt – die ist definitiv was Besonderes! 🔥🌟
Likes
11
Share
Likes
35
Share
@Prettyg
Follow
Bueno chicos entramos ya en la semana 3 no entiendo porque no crecen mucho en altura , que os parece ?en e día 18 a stardawg le he hecho lst y en el dia 20 a la gorilla 🙈
Likes
2
Share
@ChiTaN
Follow
The girls are doing great, Wedding Cake seems to be the most mature.Apart from the girl just mentioned, I'm betting the harvest season is about two weeks away.💪
Likes
16
Share
Recovery at its finest, that's what you will see on week 4 around here! Guess who's loving the CO2 with high temperature? Thats right, all plants are! The comparison of last week with this week have such a difference, on day 24 I introduced a DIY CO2 bottle, the recipe consist in: -CO2- 2 cups of sugar 1 tablespoon of yeast 1 tablespoon of baking soda 1 later of warm water Mix all ingredients on a bottle, make a nail hole on the cap shake a little (when shaking put your finger on the nail hole, you should hear a hissssss when you release the hole) use it when lights are on, increase temperature to 30-35C, watch for high levels of humidity, and voila! I haven't started any LST yet, I am waiting for a bit more growth to start bending, I have to make sure all 5 plants will have enough space inside this 2x4 tent. All suggestions are welcomed :) Thats is for now, Stay Lit folks!
Likes
10
Share
Had a great week. These babies are still stretching quite a bit and I see pistils everywhere. The next couple of weeks should show some actual nuggies popping up.