Recommended
Likes
Comments
Share
@OGgrows
Follow
Due to the pandemic, I was unable to update this diary weekly, but I recorded the results of the harvest with some photos and only now managed to update the diary. Of two plants, both flowering amazing without big problems. Flowering went well despite the plants having to withstand a lot of heat. Happy Growing to all 🤜🤛🌲💪🙏💚
Likes
14
Share
Last week I messed up and put the wrong plants last week. Last week of veg. Flipping everything I to flower as I gotta move and don't wanna move plants to new house
Likes
2
Share
4 of 5 seeds germinated. The 4 masterkush are a little lighter color, probably a humidity issue as the other strain appears normal. Running 62%rH, the MK may need a little higher rH to use calcium. I add a tsp per gallon of calmag to clean rainwater may increase it to1.5 if this continues.
Processing
Likes
20
Share
She is doing a lot better this week I had to install a heater unit outside tent to keep levels better for the plants . The leaves are doing better and tomorrow she gets a feeding again and will be doing producing more leaves and getting healthier . She isn't flowering yet or any pre flowers but it will soon and she is gonna be a short one this go around . Cheers canna family....
Likes
5
Share
@TTerpz
Follow
Start of week 14 (hopefully the last) Fed with water 5/15/25 Fed with nutrients: 5/17/25
Likes
2
Share
Love this strain and breeder, he is a Virginia based and local. Super easy to grow.
Likes
11
Share
Good week this girl is doing well, varied coloration, the buds are compact, the trichomes are creating color, I can go further until the harvest window to avoid loss of yield.
Likes
12
Share
Throughout the week, I give compost tea, and fermented plant juice once each ^^ Hope you guys have a wonderful day today ^^v *** Please Like, comment & share *** Highly appreciated -----/-----<@
Likes
11
Share
@Grey_Wolf
Follow
FBT013 aka White Widow . Well this girl is a big stretcher , she went from 30 odd cm to 60 in a week . She also has fairly long internodal spacing so far. I wonder if it will fill in a bit more between nodes as the buds develop? Im hoping it does. Fed her a third of a cup of Mr B's Green Trees Bloom mix and some Great White Mycorrhizal powder which I simply watered in thoroughly. That is all for this weeks white widow update Hope To See You Next Year 😃
Likes
52
Share
@MeaCulpa
Follow
Half time in bloom. I made a video with and one without flash. This is always a bit misleading. I set Josefine a bit higher. I should have done this much earlier as she was already the smallest the whole time. I defoliated a tiny bit. Should be. A few leaves are turning yellow, but I think I watered a little too much, or gave too much fertilizer. However, it doesn't look alarming to me at the moment. They'll catch themselves again. Otherwise, I'm looking forward to the first week of April.
Likes
41
Share
I really feel like I am learning SO MUCH with this grow, heaps of things I could improve on next time. 😺 Day 28 - I fed her a 420ppm nutrient solution, and as I was watering her a fair bit got on her leaves. I shook it off her but a few drops on her lower fan leaves were stuck. So I grabbed the droplets with my finger and smeared them into the leaf. Big mistake, next day the leaves were all burnt! 😡😲 The upper fan leaves that I didn't touch were fine, the leaf tips were fine also. Day 30 - Plant really looking happy now, growing nicely and stretching up towards the light. The 4th set of fan leaves still 3 pronged (has grown cotyledons, then true leaves with 1, 3, 3 and 3 prongs). The 5th set of fan leaves is now visible as a bud in the center, and I can see that this set has 5 prongs. So was likely the stress that made the first sets of leaves 3 pronged. Day 30 - I really want the plant to be BUSHY to take advantage of this small light and surround it, so I decided to try FIMMING today! The middle bud was at the perfect age for this so took the opportunity, I hope she can handle it. Happy to sacrifice a bit of yield to get more buds closer to the light for a more consistent quality. If you think that yield is more important and I shouldn't do this, here is a fact for you, over the last 5 years I have gone through about 30g of bud with me and one friend, we have some about once a month or two. So yeah I don't care about yield just quality 👌. Day 34 - Female preflower showing! Shit this means she will be into bloom soon, and still so far behind where I wanted her. Researched on the interwebs and found that I could still have a good 2 weeks of fast vegetative growth at this point. I realised my last feed was only 1/3 strength fertilizer. Time to feed her a decent meal, GO STRONG OR GO HOME! I fed her 5L of pH 5.9, ppm = 775 - with 20ml of Canna Rapid combined A&B
Likes
6
Share
@xmackobox
Follow
Hola amigos arrancamos nuevo cultivito, por ahora os traigo los videos que subo a YT como ya sabéis le estoy dando caña al canal, buscarme allí, me llamo como aquí, xmackobox. Poco mas, se empezaron a germinar el día 14/02/24. Algunas se pasaron a maceta el día 16, otras en 17 y se terminaron de plantar en maceta definitiva de 11 L el día 18/02/24. Para la primera semana de crecimiento ya meto fotos detalle de todas. **ACTUALIZADO** 26/02/24 llevamos 12 días desde que se empezó a germinar, todas brotadas perfectas excepto 1 que como veis parece atrofiada o con algún problema, no desarrolla el ojo principal es decir su punta apical. Esperaremos a ver que hace esta plantita :D
Likes
9
Share
100 gorilla glue plants here guys Nearly ready to go outdoor s just waiting for this shit weather to go better and yea guys I know you gone say Dont transplant autoflower but guys I have always done this and it works for me😎🤑
Likes
133
Share
We're still keeping her relatively bare, but as you can see the new growth came in nicely, we have 12-13 main tops now...she's likely getting a little root bound in that pot, she did get a new 6.5 gal home but i think a 10gal pot would be even better for a plant like this... we made sure to grab all the clones we could, she's definitely a keeper
Likes
13
Share
@Canadian
Follow
On the first day of week 4 I did topping on the plant at 6 node. Up to this point the plant has been growing very strong and healthy as fast as Autos I have grow before. Day 22 the plant doesn't seem stressed out at all and in fact is pumping New Growth right away I thought it was going to be sad for a day or two but no way the genetics are very strong the plant is very vigorous also their leaves are starting to smell . Day 24 I did some minor defoliation to allow the light to penetrate everywhere in the plant. I will continue to update thank you for reading and have a happy grow.
Likes
32
Share
Welcome to Bud Boutique Grow Diary - really appreciate all your love and support :) Dont forget to check out my other current grows! 🗓️ This Week: After 14 Days drying inside tent with about 60% rh and 18° Celcius ( I know could be even lower). - trimmed all well and put them straight into Grove bags for curing. That is the end of this Diary, thank you all for sticking with me. The next new onces are already up so feel free to check out Thank you for still staying with me 💚 ___________________________________________ --- 🌱 Strain (Sponsor) --- 🏷️ Stardawg by MSNL https://www.marijuana-seeds.nl/stardawg-feminized-seeds --- 🥗 Nutrients and Feeding (sponsored by APTUS: APTUS Ambassador) --- 🍸 APTUS: full nutrient schedule extreme -- Regulator, N-Boost, P-Boost, CaMg-Boost, K-Boost, Allin1 Liquid, Startbooster, Topbooster, Enzym+ every feeding -- Fulvic-Blast, NutriSpray as Foliar each once a week 🔗 https://aptus-holland.com/ --- ♻️ Grow Control (Sponsor) --- TROLMASTER: TENT-X + LM14 Light Adapter to dim/sunrise/sunset lights + Temp & rH Sensor all remote on App 🔗 https://www.trolmaster.eu/ --- 🚿 PetraGrow (Sponsor) --- CannaFogger Foliar Spray 🔗 https://www.petratools.com/product/petragrow-cannafogger-atomizer-new-mini-fogger --- 🏭 Grow Setup --- 💡LUMATEK Zeus Pro 600 * 🏠🌿 Indoor: Homebox 120x120x200cm (4x4) * 📐🌀 PrimaKlima exhausting Fan 1180m3/h (running on 60-80%) * 🌀 Can Light Filter 800m3/h & 1x Fanbox 1x Dyson fan for Air circulation 🔗 https://lumatek-lighting.com/zeus-600w-pro-29/ 🔗 https://primaklima.com/de/shop/ventilatoren-de/ec-ventilatoren/pk160ec-tc/ 🔗 https://canfilters.com/products/filters/ All Likes and comments are highly appreciated!!! 👨‍🌾 don't forget to check out my Instagram for daily educational content: budboutiquee - Bud Boutique
Processing
Likes
1
Share
Likes
13
Share
Week 13 not a bad week if I do say so my self …guna tie down this week and begin spraying silver thiosulfate on donor plants then next week I’ll throw the donor plants into flower and begin the actual breeding project …which ever specimen reverses first shall be collected and used to pollinate which ever one doesnt will be killed and removed acord