MAC AND JAC—WHITE RUNTZ
Twilight Princess - Multiverse Genetics
Cannajo
@Cannajo
Follow
Just watering with water ph at 6.2 this week nothing crazy
Glue Gelato Auto
FrostyB
@FrostyB
Follow
I experimented with this as it was a free seed and I wanted to see what would happen if I removed any additional nodes and just kept focus on the man node/ cola. She weighed in a solid ounce dry maybe less give or take a few days of curing/ drying. Smoked really nice and packed a punch which kinda made me regret using this beautiful strain in my experiment as I would have loved more from her but at the same time she taught me a lot with regards to nutrient levels and how plants react depending on which way they're trained or defoliated which has really helped me with future grows so for that I will certainly be running this strain again! Thanks Barneys ... Awesome genetics as per usual 👏
Banana purple punch
Lazuli
@Lazuli
Follow
Flower start to kick in, Last week feeding 550ppm ~ runoff 300 Now feeding 850
Tropicanna - B&B
We are really a very short time from the harvest, 5 days compared to the six weeks declared and actually we are. The trichoms and red hair are taking color the plant is mature or still lacks little. The flowers are beautiful, the topping at 16 pounds worked great. There is a scent of paradise, of Pussy of beautiful Ninfa Devvero. LIGHT >> MARSHYDRO SP3000 AT 100% OF POWER, we already like it so much because it covers the intact length of the tent. Tent >> Marshydro 120x60x180 CHECK IG >> https://www.instagram.com/marshydro_aliexpress2/ Buy >> marshydroled.aliexpress.com GD >> https://growdiaries.com/grow-lights/mars-hydro #Marsyear
Sticky beast + auto purple cous kush
Sfinxks
@Sfinxks
Follow
Air pump on 2 plants failed and the plants went kraty for a week. Aiming at 400g now, one sticky beast is almost ready to harvest, Lucky first grow! 👌🏻
AU79 (bridal party x the queen)
Posting the phenos when I do them
First Attempt (with 528 Hz informed water)
Waveform
@Waveform
Follow
Already week 7, and it’s starting with much better air humidity which makes it easier for me to stay in the recommended VPD range – currently 54% at 25 °C at canopy height. With 58, 67, 78 and 80 cm plants’ average height is about 71 cm. Odour has increased, and sometimes, but only shortly, I get the feeling the coal before the blowers cannot eliminate all of it. While the smell was a bit strange sometimes one and a half week ago, it’s now absolutely yummy, sweet and promising. As is all the sticky stuff adhering to my folding rule when I measure their size. I am a bit confused about the amount of yellowing leaves. That would indicate a nutrition deficit. On the other hand, last feeding (yesterday it was only calmagged water) brought some brown edges to their tips as I wrote. Which could indicate a slight over-nutrition. I am not *that* worried as leaves around the buds all look great (except for mentioned, but not youngest tips), and mature plants obviously tend to concentrate on bud production solely. But week 7 is quite early, or isn’t it? Any recommendations? Maybe I should go with organic fertiliser next time to avoid being stuck between two options ;) As they had run dry already, I gave each one another round of drink. Slightly less fertilised than last week. And I removed the lowest yellow branches and tiny buds that would not make it into the light in time. The Pineapples must have some mimosa genes crossed in. Each time I touch them they bow away their heads in deep dislike. The taller one looks like her head would be too heavy now … It is not, and usually they recover after an hour or so. The Sherbets are pretty unimpressed by all I do. Meanwhile I’ve been working on the Raspberry Pi BoxControl that should help me stay in better VPD ranges in the future. I am not sure how to translate this all into a more stable solution than based on a breadboard, but the state so far (and how it is supposed to work): Raspi runs headless with control software on autostart. Every minute temperature and humidity are received from a GY-21 I2C chip that should be hanging around plant tops. Data is saved in a database, VPD is calculated and signalled in form of a RGB LED color. Additionally, LCD display rotates through current stats. 3 relay modules can en- or disable misting, dehydration or an additional blower. Maybe I can add a CO2 sensor just for the fun of it (but I’d have to develop a device protocol myself), maybe even one or two soil moisture sensors. Theoretically you could also have a lighting control, but then, GPIO ports are all used. The display needs a lot of them, and while I can log onto the Raspi on my local network and view its desktop, I’d prefer to have a quick overview at place. I am not really informed about current models. Are some GPIO extensions or Raspis with extended GPIOs on the market? But so far, that’s all theory. I never had a PCB developed for my hobbyist projects, I am not the best with a solder station. Never had a Raspi run 24/7 for a really long time. Did a bit more lollipop ping in the evening. Especially tallest Shepard had fun building some more very low buds and branches. I think it can investigate its powers better on different places. Day 51: It’s getting hard to measure soil humidity with my low tech device. Soil must be full with roots and I don’t want to hurt them much. I can see them at the outlets of their pots too, sometimes a bit dry of course as these parts run dry earliest. Experiments to include the CO2 sensor in my test setup failed. I can read and reset it, but setting measurement mode and reading values don’t work. Maybe because my I2C library cannot use ClockStretchLimit. Running out of GPIO ports anyway and seeing that the soil sensors are analogue devices, I’ll probably revive my Uno too and have discovered some clever Raspi heads that should make a more stable setup (and some cooling) possible while also adding a handful of PWM ports and an integrated display. I’d like to include a camera module too and it would be great to have some ports available. A final setup would obviously include a Raspi 4 or 5 to easily enable secure online access. But so far, all working nicely in test setup. Day 54: Sometimes I wonder if they’re still growing at all, but then it’s good to have the daily pictures to compare bud width which now seems to be the main interest of the ladies, although differences are now clearer to tell between two day intervals. The taller ones look like they are one week ahead of the smaller plants, with even higher fan leaves turning pale now. Which at an estimated seed–harvest time of 8–11 weeks for both strains should be pretty common, I guess. Or am I wrong? Summerly temperatures make the temperatures at canopy level sometimes reach 31 °C, but at least the simple ultrasonic diffusers arrived and I am getting closer to a better environment control. I can at least switch the diffuser inside the tent remotely from my phone, and a deep bowl of water with a lid so the "fountain" produced will not wet the tent floor and one of the fans placed at the bottom now to lift its mist upwards seems to do the trick. Humidity increases while temperature drops, getting the plants into a better VPD level, so all I have to do is wait for the evil A to deliver the necessary Raspi components to have this automated, maybe still while this grow runs. At the end of this week, there was just a bit of height gain for the two smaller ladies who now approach their next 10 cm mark. Overall, I get the feeling it won’t be that long until harvest. Maybe with the taller ones a week earlier than the others. There’s really not that much bud growth anymore, rather refinements – like buds getting more nodes and color. I’ll investigate the trichomes every few days but would welcome your estimation.
Canuk Seeds Elixir CBD Auto - Hydro
Finally, she has come to a finish with the three ladies coming out to a total of 60.8G. I would say I'm slightly proud of this grow, if only it weren't for the hiccup I had during mid flower. The buds are a little airier than I like, however she smokes like a charm and I would definitely recommend this strain to anyone looking for a high CBD dominant strain. Thanks for all the support this run; seeing as it was my first attempt to hydro it is very much appreciated! Til' next time
Blue Dream Extreme  DWC
Roberts
@Roberts
Follow
Blue Dream Xtreme is growing okay. She has given me issues most the grow. So I am doing best I can to keep her hanging in there. She is the biggest so I must be doing something right. She is doing good under the Spider Farmer SE5000 light. She may be a little close, But she stretched a lot more then the others in run. As always time will tell. She is in a New Level Hydro bucket. Thank you Spider Farmer, New Level Hydro, and Amsterdam Marijuana Seeds 💪🌱🤜🤛 Http://amsterdammarijuanaseeds.com Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g SE5000 https://amzn.to/3qFpAML Spider Farmer Official Website Links: US&Worldwide: https://www.spider-farmer.com UK: https://spiderfarmer.co.uk CA: https://spiderfarmer.ca EU: https://spiderfarmer.eu AU: https://spiderfarmer.com.au Coupon Code: saveurcash Www.newlevelhydro.com Www.hygrozyme.com
Chocolatehaze x16 (s.o.g)
J_diaz420
@J_diaz420
Follow
Se hace defoliación extrema 5 días antes del corte para intentar hacer madurar la planta de forma mas pareja.✌️👨‍🌾🏻
Kali China
Kali China Kali China is alive! 🇨🇳 Die Kali China ist schön aufrecht unterwegs und hat bereits ein ordentlich entwickeltes erstes echtes Blattpaar. Auch der nächste Austrieb ist in der Mitte schon sichtbar. Der etwas längere Stiel ist dabei durchaus gewollt – beim späteren Umtopfen kommt der kleine Ballen einfach ein paar Zentimeter tiefer. Bis hierhin ein richtig sauberer Start. 🌱
#10 – Mango Runtz
ojulhao
@ojulhao
Follow
These pictures were taken by the end of the 11th week. I find it curious that one of the plants became purplish, while the other one was completely green. Both underwent the same conditions, nutrients, sun exposure, etc.
White Widow Automatic
D8 - The start of the second week of vegetation. D10 - Today, the small tent was finally empty, and the girls could move in under the Kingbrite light. They are getting around 170-200 PPFD. I also watered them for the first time by giving each one a small splash of water @ pH 6.7. D11 - The girls were getting a bit cramped, so the humidity domes came off today. I set the Inkbird controller to an RH of 85% (+/- 2%) and hooked it up to my larger humidifier. Even without their domes, the environment in the tent should be nice and humid for the seedlings. D14 - The end of the second week of vegetation.
Strawberry CheeseCake
🌱Welcome to my 2 x 4 ft autoflower tent. Here we have Seedsmans Strawberry Cheesecake Auto. We just finished the 1st week of flower. She went through a 3 week veg stage. This week we top dressed for the first feeding of the grow cycle😌💨 💧She has been receiving water every other day about 1 L of pH adjusted to 6.5. ✂️ TRAINING: N/A. 💡⚡Check Mars Hydro out on Instagram! @marshydro_aliexpress2 💡⚡
The matrix
Not a fan of autos so I put it in garden soil but great for not having to do almost anything just started giving her food for flower was just giving her the run off from my other girls
Glueberry OG/Spectrum X LED
Canna96
@Canna96
Follow
Hey now, hope everyone is having a great week. This week went well for the Glueberry Auto OG. She started stretching and grew from 15 to 26 inches this week. I did start to transition her to flower nutrients today, and I am now feeding her silica, cal mag, and half veg and half flower nutrients. I will switch to 75% flower and 25% vegetative nutes next week and then to all flower the following week. I do not wish to totally cut off the veg nutrients yet, as I am fine with her growing another 12 inches or so, but not much more as this light is extremely powerful. I am running the Medic Grow Spectrum X in V1 (blue veg spectrum) and have cranked it up to 100% this week. I am running the UV/IR bars for approximately 75 minutes each day at the end of light cycle just prior to lights off. I will be transitioning to the F1 (red flower spectrum) as well as increasing the amount of UV/IR the ladies are exposed to. After approximately a week of feeding fully Flower Nutrients, I will also utilize a bloom booster (PK Booster) for the final couple of weeks before flushing her for approximately 5 days before harvest. Not much to do this week except keep the reservoir clean, full, and in the proper PH range. If any colas get crazy higher than the others I will correct, but other than that she can do her thing from here on out. Thanks for stopping by, Stay Safe and Blaze On!!! 💪 Website: https://medicgrow.com/ https://growdiaries.com/grower/medicgrowled
Grow#2 Gorilla Glue Herbie's free seeds
GG has been going well, a lot of growth this week, continue to tie her down , really good structure on her. Taken a few cuttings to clone, flipping to flower.👏🤞👍
Blueberry Pheno # 3 clones Micro Grow
pzwags420
@pzwags420
Follow
I'm now on vacation for 2 weeks so all photos will be from my security camera. From what I can tell my new clones are greening up and putting out some new growth. My blumats had a runaway on day 3... luckily my neighbor was around and was able to slow the drip rate down on my one plant which was starting to flood my box. It has now stopped dripping and my hope is there will be no more hiccups..I will be watching closely over my vacation. 😅🙏