The Grow Awards 2026 🏆
Likes
Comments
Share
@cr0baron
Follow
The buds foxtailed a lot partly due to light stress but also due to genetics. This made it a bastard to trim. Unfortunately when drying the buds I noticed some mould had infected a few of the large buds which was a great shame but I'm still pleased with the yield.
Likes
42
Share
@DrLaggis
Follow
🌱UPDATE Day 3 🌱- The plant is alive and has already grown to 3-5 cm! In these early stages, I placed a plastic cup over the plant to boost humidity. It's been hot, and even with a humidifier, I battled very low humidity for two days. Nonetheless, the plant looks healthy and vibrant. 🌱 🌱 UPDATE Day 4. 🌱 - The plant is thirsty - when should I start fertilizing? I last watered it on Day 4 with 200-300 ml, and the soil is dry again today. I'll give it another 200-300 ml, but I'm going to research whether this watering ratio is optimal for my 11 L pot. It's growing well, and the serrated leaves are becoming more robust. 🌿
Likes
16
Share
@Train
Follow
Transplanted from red solo cup to 2 gallon pot mid week. Trying to build solid roots that are slightly bound. Intention is to train the roots horizontally and vertically in their final 7 Gallon cloth pots. I have reduced my plants from 3 to 2 plants. I feel 2 plants work better for a Scrog in a 2x4 tent. I am watering (200ppm, 6.7ph) with a 2ml solution of Seaweed Extract roughly 2.5 times per week. I am also applying it as a foliage spray using a pesticide sprayer.(brand new, so clean) Runoff water PPM 750(due to FF Ocean Soil) Ph 5.8. Same day of transplant I put my plants under my Mars Hydro Tsl2000 on full power 40 inches from the plant. Following day: 25 inches Following day: 16 inches (best recommend distance by cocoforcannabis.com) helpful site for tested lights. Currently both plants have 4 nodes. I intend to top above the 2nd node once 5 nodes appear. I intend to scrog in an X pattern with the 4 main colas that should develop.
Likes
25
Share
@Kingseeds
Follow
MB is amazing strain from exotic genetix ,great teast and aroma and very powerful (absolutely greasy) Heavy yield and bery strong genetics
Likes
17
Share
this week is doing fine watching them grow after last week F.I.M and topping they look healthy and are recovering from past root rot problem for me calcium hypochlorite and blanking the bucket with thermal reflective material saved my grow and after all im not adding more chlorine than regular tap water since im using reverse osmosis keep your roots healthy and is basically the same as UC roots
Likes
218
Share
@DevilsBud
Follow
Week 8 off flowering Critical On to a next week it's getting closer to the end Growmies 😱😱😱 . But i am ready for it 💪🏻the Critical will be done one week before cookies gelato so last week of feed then flush week for the Critical Day 49 Short and dense and heavy that's how the buds are getting . I got the critical seed for free and wasn't keen of growing them because literally every shop here sell it . But the critical is surprising me in good way and very potent skunk smell buds also getting solid as rock 💪🏻 Day 50! Critical is getting there i looped some tops and the clear ones getting Milky but the amber is not seen on buds yet patience will win the race! I would be flushing after this week but i am holding that of and wait and 👀 Day 51 Took some pictures of the critical close up and it's definitely looking good gave 1.5L nutrients pH 6.6 Day 52 Critical is looking already jummy tricomes on the buds are getting insane but it could be me it's my first time ever grow and not seen it before but i like how it looks and smell's couple more weeks Day 53 Good day Growmies what a wonderful day it has bin for the plants and for my self very happy with the results i get under my lovely marshydro TS-1000 Is too notch 👌🏻 have great weekend folks Day 54 Easy Sunday so nothing going on today Day 55 end of week 8 Flowering Hallo folks it's end of week 8 gave them nutrients this morning and on to the next week MA FAKAS 😎 Come look at my other diaries! I appreciate it a lot 🤘🏻 Also want to thank everybody for the comments likes etc you know who you all are 👍🏻😍👍🏻 visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some handy info about the marshydro TS-1000 Increase Yield&Crop Quality in Led Grow Newest SMD Led technology provides the highest Par/Lumen output, makes you get 30% higher yield compare old led lights, can get up to 2.5g/watt yied. High Efficiency Energy Saving Plant Light Only 150 watts true output with so you don't have to check your light bill every month 😎 342 pcs LEDs, more scientifically and energy-efficient! Perfect for 3'x3' (100x100cm) veg stage and 2'x2' (60x60cm) bloom stage, higher intensity in a Mars Hydro grow tent. Sunlike Full Spectrum Led Indoor Growing Infinite close to natural sunlight, suit for all plants whole satge indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. High Reflective&Noise Free Fanless Led Grow System Quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants to receive more energy and without burning your plants for maximum headroom.
Likes
8
Share
This week I basically just let Bruce banner recover and that she has keep following the crazy train lol..
Likes
54
Share
***April 11 First things first, she is looking sexy as hell. Trichomes are spreading down the leaves, they are fattening up super nicely, it's been handling the nutrients really well, and has been drinking a decent amount. I get a nice vanilla bean, sweet, pine smell coming off of her, and it's been getting stronger every day. I haven't been needing to take too much off of her, just a few fan leaves here and there, but she has been taking care of herself pretty good in the long run. I have been taking off some of the teenie-tiny buds as I see them, because I want the main focus on the top nugs and the middle branch. Roots are growing like nuts, but I'm going to leave them go for now, until they get more out of hand (probably the end of this week). I gave 1tsp extra of the Bloom, since it seems to be handling things well, and not showing any signs of burn. 😍 Very happy with things so far!! ***April 13 Wasn't around to open my tent when the lights turned on, so it spent 6 hours in max humidity, but it seemed to like the stress, because it's literally coated to the tips of the top fan leaves with trichomes. ***April 15 WELLP.... I had to raise the light again 😂 She is growing vigorously, and is showing no signs of wanting to slow down. Still stretching just a tad, but mostly just packing on the weight and getting dense. Even the nugs down at the bottom are big enough so show they are worth keeping. I am so impressed with this grow, and I can't get over how happy I am to see it loving everything I can think to throw at it! Hard to believe just how big this filled out compared to before flower. Definitely 5x the size she started from, that's just my estimate. She started 1/4 the tent, and had enough room for all those veggies along with her, and now looking at her, I am thinking "wow... it's a good thing I got everything out of there when I did." 😂😅😍
Likes
9
Share
Well, well, well... the long awaited process has begun. Cheers to never paying for good gas again. Day 1: Dropped 12 seeds (6 strains * 2 seeds each) into 6 glasses of water and labelled them appropriately. Day 2: Noticed 60% of seeds dropped within 12 hrs 100% within 24 hrs.. transferred to paper towel in plastic bag.. Some tap roots already emerged Day 3: Placed seeds onto paper towels in six separate plastic bags labelled appropriately around 8p.. 12 hours later tap roots had emerged on 80% of seeds. Day 4: Seeds went in the soil around 2p and by 9p our two seeds with the strongest tap roots had emerged from the soil 💪🏾. (also added two clones to the mix).. Took the last couple days to test out the AC infinity controller seedling recipe to see if it would keep levels I’d be happy with and after a few modifications I’m happy to say I think it’s working well. Day 5: VPD/RH/Temp Numbers are all looking good. Had an issue with my controller not turning off the lights, but I changed the automated setting so it should be on 16/8 now (off from noon to 8P) Seeds all seem moist I even saw a water droplet on one of the leaves, so I'm going to hold off on watering until tomorrow... then probably Friday or Saturday after that. 7 of 12 seeds are above soil and showing cotyledons, 4 of 12 have fan leaves already. Growth is quickly happening! Day 6: 10/12 seeds are above soil. I might’ve messed up the auto flower we planted directly in the five gallon pot, but we will see. 11 days or so until we out grow the seedling tray. Day 7: 11/12 seeds are above soil. The soil in the 5 gallon pot looked very compacted, so I broke it up a bit and the seed popped within 24 hours. I’d say this was a successful germination week! Changed the light time to off from 10a to 6p for temp purposes. Coasting between 70/75 day/night, right at 70% RH, and .8 VPD.
Likes
13
Share
Hello Diary, Titan F1 is ready for harvest, on day 63. Milky Way F1 and Apollo F1 will wait another week in my estimation. So, 72 days since I put the seed in the ground. 68 days since Titan F1 sprouted. Really fast, and the result is incredible. Titan F1 is a really beautiful plant. The flowers are hard to the touch, really compact, and smell wonderful. The flowers are covered with trichomes and it looks like it is covered with ice crystals. Watering was more frequent this week due to the high temperatures, they needed a lot of water and so did the Titan F1. At the end of the week, the 63rd day to be exact, after taking photos, I cut branch by branch and put them in a cardboard box to dry. Considering that two plants still remained on the farm, I had to protect the flowers from the penetration of light. Here's what it looked like last week. 26/06/2023 - Day 58. Watering. Only two days later, the plants drank all the water, so I watered them with two liters for each individual plant. 29/06/2023 - Day 61. Watering. I repeated the procedure as I did three days earlier. 01/07/2023. - Day 63. Photographing plants. After I took the photos, I cut the Titan F1 branch by branch and put it in a cardboard box to dry. That's all I went through with the Titan, I wrote and documented as much as I could. If anyone has a question related to this strain, feel free to write in the inbox.
Likes
7
Share
@Famtreez
Follow
crazy week found drain gnats which explains the green hue of some of my plants the larve are attacking the roots raising the p.h. and the diffecencies are showing in the leaves being lighter and or brown dots on the leaves. using mosquito dunks and spraying neem oil washing the roots to help these ladies out. also im doing things different with the soil vs dwc, i havent done much if any defoliating with potted plants just letting them grow only mainlined once and since in flower very light if any defoliating. any questions comments information feel free to ask or inform im open to critque
Likes
28
Share
Let's put it this way, the leaves show clear problems, on the other hand the buds continue to grow well. I was only able to counter this a little with the fertiliser, but you can also see in the timelapse that it hasn't worsened any further. I have uploaded pictures of the leaves, you are welcome to give your opinion/assumption.
Likes
6
Share
Likes
31
Share
@KitaKush
Follow
78 grams roughly 2.8 oz! Pretty happy with that as I’m looking for quality and potency and no longer quantity and quickness. She has a good amount of frost and super pungent stank radiating off her. Unfortunately for me I had issues with drying and at one point a few hours of 70% humidity which led to a few areas of mold…I threw away those buds and the rest are top notch..probably my most resinous plant harvested so far and strongest smelling. I also grew a runt which will give me less than an ounce now I know it’s just best to call quits on those stumpy odd growing plants and start fresh. Lastly my humidity stayed at 52-56% and I should’ve harvested 1-2 days earlier so the buds are much drier/crispier than I’d like. I’m still trying to find a good drying location..one room had that low humidity and my grow room had way too high at 70..will figure it out eventually. Also 200watt for lighting I can’t go back and change it.
Likes
7
Share
Hey everyone 😃. This week is still going perfectly 😃👍. The trichomes have been checked (70% milky, 20% amber and 10% clear) so there is still some time until harvest :-). Let's start the week: Flowering day 56 Today the plant was checked for health. Flowering day 57 Today it was poured with 1.2 l, only with Clean Fruits so that you can use up your remaining nutrients 👍. Flowering day 58 The humidifier was refilled and the tent cleaned. Flowering day 59 Today was only controlled. Flowering day 60 The humidifier was refilled and the tent cleaned. Flowering day 61 Today was poured with 1 liter, and the trichomes checked, of course the tent was also cleaned. Flowering day 62 Today was cleaned, the plant cobtrolized for trichomes, mold and health. everything looks great 👍. And fresh osmosis water was filled in tanks for next week. The way the trichomes look like, is harvested in about 10-14 days 👌👍. Until the next update, I wish you all the best, stay healthy 🙏🏻 and let it grow 🍀👍 You can buy this Strain at https://thecaliconnection.com/original-sour-diesel.html You can buy this Nutrients at https://greenbuzzliquids.com/ Type: Original Sour Diesel ( Clone ) ☝️🏼 Genetics: Fem seeds- Original Sour Diesel to Original Sour Diesel BX3 RVSD Male Reg seeds- Original Sour Diesel x Original Sour Diesel BX3 Male 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green Buzz Liquids : Organic Grow Liquid Organic Bloom Liquid Organic more PK More Roots Fast Buds Humic Acid Plus Growzyme Big Fruits Clean Fruits Cal / Mag Organic Ph - Pulver ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 - 0.4 EC. Add Cal / Mag 2 ml per l water every 2 waterings . Ph with Organic Ph - Pulver to 5.8 .