Comienzo de este cultivo. Partiendo de esquejes seleccionados. En macetas de 1/4 con lightmix, luego vino el trasplante con complete mix a maceta de 11 litros y mycorrizas. Esta semana fue pura adaptacion al nuevo ambiente. Aplicacion foliar de un preventivo de base azufre y jabon potasico ya que estos esquejes venian de una situacion de araña roja. Full preventivos

Topped the plant in day 29 from seed. Nutrients concentration is dropping 10-20 PPM every 1-2 days. PH is drifting up every day, I have to drop the PH every 1 to 2 days. Light intensity for this week is at 46% ( Fluence Spydr 2i) . After toppling I dropped the light intensity to 36% for a day.

Royal moby is doing amazing, heat wave is hitting but she is not impressed, it's kind of hard to keep the soil moisture right with 33c in the tent but we are going on !

20.7.

4iem semaines de floraison... Tout ce passe bien 😜

Realized when I setup the soil that I forgot to give it a good soak and allow to sit for 24 hours. It's just straight out of the bag and I feel like I'm not watering them enough.

This week was cloudy and rainy but it doesn't look too bad. Usually in the fourth week autoflowers start to grow rapidly - time will tell. I watered the plants with water only. Anny suggestions?

SWISS DREAM ROSE 🌹 CBD AUTO KANNABIA SEEDS WEEK #11 Overall Week #8 Flower This lady is Beautiful she really stands out with her amazing purple buds covered in trichomes she's definitely gonna get your attention and catch your eye!! Stay Growing!! Kannabia.com SWISS DREAM ROSE 🌹 CBD AUTO

So it now just about the 3 different Runtz x Layer Cake phenos, yes right 3 of them: 1. The Runtz pheno 2. The GMO dark pyramid pheno 3. The Layer/ Wedding Cake pheno in lilac I need to start to harvest the top crowns now, because they are ready now. I estimate around 7-10 days until they are fully harvested. Also I left 1 mainline from both Bruce Banners for a maximum of narcotic pressure from the hulks, just to clarify the whole spectrum of a plant, from early to late harvest. I think that makes sense? I use my oCoQ- Doktrine with maximum of stress without lockouts, always at the edge with normal CO2 levels (400ppm)😅😅

Looking good so far, got a little bit of light burn at beginning of week but not to bad. Plants are really starting to shoot up now that the roots have hit the water. Topped all 4 at beginning of week 3 for LST prep. AC unit in tent is keeping it around 21 Celsius and water is keeping between 18-20 Celsius naturally so far. When the lights go up from 600w to 1000w though my tent will hit 25+ Celsius so I am currently testing a new water cooled thermoelectric peltier reservoir water cooler I built and I will be installing soon. So far testing it I can bring a 5gal bucket of water from 25 Celsius to 10 Celsius in about 6 hrs. So we will see what it can do with about 20gal of water in my set up once my lights get turned up. I will be posting pics/video once I get it all figured out. So far it’s way cheaper then a commercial water chiller and seems to work good.

What's up growmies, We reached the final stages...almost ready to cut. Its probably going to take an extra week compared to the Strawberry Cola. But the productions is maybe 30% more on this one. Veery long staked colas. Starting at the bottom of the plant all the way to the top. Sweet and fruity smells and drinking almost double the 💧 water compared to her neighbour. One more week of nutes and then another week with plain water is what she'll have probably. The root is a giant, white ball filling half the bucket space. I've used great white which from my experience is very very good. Doesn't perform miracles like Jesus though. The water temps in the reservoir needs to be in the correct range or else it almost always will develop phytium. If you can't keep the water cool ( 17/21ºC) you're better off with a steril system using H2O2. See you guys next week. Good grows

Hi liebe Community and Welcome Back! 🌿💚 Willkommen zur siebten vergangenen Blütewoche! Blütetag 57 Insgesamt zeigt sich hier in diesem Grow eine stärkere Blütenausbildung, als bei der anderen Pflanze. Auf jeden Fall zeigen sich Phenotypische unterschiede in der Gesamtstruktur. Allmählich kommen wir auf die Zielgeraden. Sie zeigt eine richtig schöne Struktur und wir landen beim Ertrag sicherlich im XL Bereich. Das Aroma hat bei dieser Pflanze einen stärkeren süsslichen Zitrustouch mit nun ausreifend fruchtigen Noten. Die Umgebungsgegebenheiten sind aktuell gut: ————— 🌞 Temp: 26 🌚 Temp: 18°C bis 19°C 💨 RH: 56% VPD: 1,10kPa 💡ppfd: 830 mpm ————— Viele Grüße 👋

On day 56 the girls were 70/30 cloudy to amber trichomes (my preference) they were ready for harvest. I took clones from pheno 3 and pheno 5. I will be monster cropping these clones to preserve their genetics. the girls went into 48 hours of darkness right after. On day 58 the girls were chopped. The tent was cleaned top to bottom and we started our drying process. We will be shooting for 60-65 percent RH with a temp of 60 degrees. I expect this dry to go 10-14 days. I will update a final dry weight, pics, and smoke test in a few weeks after the cure. I’ll also be posting my last seed to harvest episode of this series on my YouTube channel that can be found in my profile link or “probation2propagation” on YouTube. Stay tuned.

This beautiful girl Snow Panda from Atlas seeds has been growing amazing since the start she has been flourishing threw these 2 weeks of flower so far growing buds faster then all the other girls loving the medic grow fold 6 she's been growing under she is the 2nd biggest of the girls an can't wait to see her around harvest time

PPFD 300-400 PPFD Start brewing compost tea 10/10 at 1500, for 24hrs.

New week in the marshydro set-up 4'x4' tent FC-4800 lamp Got a new toy this weekend so i can read out how much PPFD it will produce still learning to use the thing but it will come Not a lot to say see you next week getting winter frost up in here 💪🏻 30/11/21 made a video today enjoy Of the beauty's 🤘🏻😎🤘🏻 visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter

For LIQUIDS ******GREEN BUZZ LIQUIDS***** organic. Also i’m using their LIVING SOIL CULTURE in powder form! MARSHYDRO ⛺️ has large openings on the sides which is useful for mid section groom room work. 🤩 ☀️ MARSHYDRO FC 3000 LED 300W 💨MARSHYDRO 6” in-line EXTRACTOR with speed-variation knob, comes complete with ducting and carbon filter.