The Grow Awards 2026 🏆
Likes
Comments
Share
@Calyxico
Follow
Kiki gets her flowers. Increasing the watering frequency (note the "w" on her schedule) as she started to wilt on day 4. In theory, she only has two weeks left, but I think she may use the extea time to bulk up. thw color is starting to fade on the fan leaves close to the flowers. I am also doing a partial defoliation everyday.
Likes
33
Share
@Caukygrow
Follow
I harvested 226 grams of dried and trimmed bud plus a bunch of trim and popcorn buds that I didn’t weigh. Definitely had it's ups and downs with my pet rabbit eating one of my plants in the first few weeks :( One of my girls also didn't make it to the end, I must of overfed her at one point and the stress was too much. This amount of buds though will keep me and my friends happy for a long time though! Thank you to all those that helped with making my first grow a success! I certainly learned a lot & can't wait to do it all again - for now I've been enjoying smoking the buds and making edibles :D It took me a few hours to trim all the buds. I didn't measure the wet weight of the plant as I hung the whole thing up to dry as soon as the lights came off. The roots were plentiful and healthy. Even my girlfriend tried smoking with me for the first time ever and she loved it!!!
Likes
6
Share
Likes
128
Share
So this was my first ever Tiny Pot 👈 wasn't sure if I could even do it 🤔 But instead it was a blast , she grew even better then expected , so much so I may do another 👍 She was a hungry plant the hole cycle, figuring out her feeding became a great learning tool , I gained alot of experience growing this one 😀 I used rain water the hole grow , to which she required feeding daily , some day twice 👈 👉I added 4 straws in week 4 to help with air flow to the roots and it worked 💪 So check week 4 to see what I did 😀 👉 Big thanks to all my Growmies out there in GD land 👈 Much appreciated 🙏 Thanks To MarsHydro for the TS1000 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14👉 Every Week NutriNPK Grow 28-14-14👉 Weeks 2 & 3 NutriNPK Bloom 8-20-30👉 Weeks 4 to 8 NutriNPK Bloom Booster 0-52-34👉 Weeks 4 & 9
Likes
18
Share
Hello friends! Welcome back to the enchanted gardens of PEAKY These sweets seem to develop differently My God ... It looks like a meteor fell from uranium into my tent It gives off radiation ... be careful!😎
Processing
Likes
1
Share
Day 8 - She has sprouted and looking healthy and great. Really excited for this grow. Day 12 She got her first soak today, she's the strongest of the set I turned off the inside fan, I'm worried it was blowing them over. Just running the extraction fan at the moment Day 13 She has outgrown the balacnce I placed for her and is looking great Day 14 She is the biggest at the end of week 2
Likes
19
Share
Bueno, empezamos por el final familia. Gorilla girl, me parece una cepa BRU-TAL , ya partiendo de esa base, mi error, creo que e cometido , es poner estos ejemplares en macetas de 5L, que tonto... mínimo recomendado 7L y a ser posible 11L Otro error fue no dejarlas una semana más. pero, escasez. (intentaremos curarla un par de semanas). Cepa con flores muy compactas, hay bastante separación entre nudos pero compensa las flores de verdad. Sabor muy dulzón a mi me recuerda a melón , es un pepino recomendado para amantes de la hierba que llevan tiempo en esto, un colocón muy fuerte, ahora mismo estoy bajo los efectos de esta vaina, aseguro que con cada frase, leo varias veces y detenidamente por que válgame.
Processing
Likes
13
Share
Week 6 Dec. 9 - Dec. 15, 2019 Dec. 11, 2019 They were moved into the tent late in week 5. They took a couple of days to get back to normal... had some drooping leaves for a couple of days... ended up raising the light to 24", it started out at 18". Continued to LST and some defoliating. Late last week I broke the main stem of ZK #3 attempting to train it toward the edge of the pot. It was hanging by a thread... freaked the hell out, grabbed the closest tape to me, you'll see that in the pic lol. It was a metal tape for duct work hehe. Noticing as the babys get further into flower they are getting THIRSTY, I'm up to watering them about .5 gallon a day. You'll see in the pics I LST'd 2 plants the same and one differently. Regarding this strain I'm not sure what method a working better.
Likes
27
Share
She lookes like need only 2 more weeks i had plan to chop it on the 13 Dec. Maybe this is her last feed before flusing.
Likes
17
Share
Very dense buds, the most dense I ever had .... I think .... They are ubersticky and have a super intense sweet smell (that covers the entire house by now 🤭👃) Really happy with this one... Could be one of my best outcomes in a very long time... Could be forever
Likes
24
Share
The Apple Betty babies had some good growth this week. Days 14-21. The girls have been dialed in at about 63-65% RH and 76-79 degrees F. On day 18 I dialed up my BP2500 to about 165 watts at the wall, and kept my small tent heater in place for the time being, nights have gotten cooler. The girls seem to be ❤️ the extra light, without causing any harm. Switched from distilled water to tap water that has been dechlorinated for 24 hours mid way through the week, no issues shown. Added 1 ml of Micro, and 1 ml of Cal/Mag to 1/2 gallon of water, PH’d to 6.2 and watered approx. 1/2cup of water per x2 throughout the week, and about 1 cup once transplanted. On day 19 they were all looking so healthy, with some roots coming from the bottom of my starter pots, I decided to transplant into 2 gallon nursery pots. My final pot will be a mix of 5 and 7 gallon fabric pots. Next week the LST begins! Happy Gardening 🇨🇦❤️🌱😎💨
Processing
Likes
62
Share
I’m baaaaack!!! Sorry I’ve been away for a while. I’ve been busy getting everything together for the next phase… Welcome to the Dude Garden 2.0! I now have 3 grow areas. Two 2x4 tents (one for clone/veg, another for mothers) and a large 10x12’ish flowering area (its actually larger than that, but I’ll be conservative). The tents are running 300w LED’s and a T5 for the cloning/sprouting station. The flowering area has a 1000w HPS!!! I’m totally psyched to see how the HPS does with flowering for me. From all the research I’ve done It seems to still be undisputed that HPS is the best for flowering (but not so good on the electric bill). I moved all plants from the tents to the new flowering area under HPS. That includes 3 Blackberry’s (FastBuds), NYC Diesel Auto (Barney’s Farm), DinaMed+ and Critical+ (DinaFem), Cream & Cheese CBD (Seedsman) and 3 Cherry Hemp (Elevator Supply Co). With the autos You’ll see the first 2 Blackberry’s are getting close to harvest, but looking a bit funky due to the issues they had early on as seedlings. The 3rd is looking much better and will probably yield more than the first 2 combined. I do love the purple and the aroma is insane. The NYC Diesel Auto is looking very nice, the main cola is developing nicely and has great colors. With the photoperiod plants, most are already kind of big considering they haven’t flipped to flower yet. I’m expecting the stretch to kick in at any time for these girls. I hope they don’t break the roof. The Dinafem plants are looking best so far at this stage IMO, but the Cream & Cheese CBD is looking very nice too. And I’m not disappointed at all with the Cherry Hemp plants, one is several weeks older than the other two, but the smaller two have a great node structure. It should be very interesting to see how these 3 grow from here. I expect the older one to be the largest at harvest, but the 2 little girls look ready to explode. We’ll see what happens. I transplanted the photos from the 3 gallon grow bags to 7 gallon fabric pots. And also purchased some Pot Elevators that they are sitting on. The Plant Elevators are pretty cool, they have a mesh base to allow better drainage and air flow to the bottom of the pots. I have clones of all of the photos cut and planted in Jiffy pellets in a humidity dome. I took 3 clones of each. The strongest clones will become mothers, the others will be grown out. Note: The HPS gives much more of a yellow wash on the pics than I was expecting. I tried to color correct the pics the best I could and tried to get to the real colors, It should be pretty close.
Likes
42
Share
@MrJoint
Follow
✌️🎃 Thank you for checking my cultivation. 🌱✨ She looks better.
Likes
13
Share
📆 Semana 3 El estiramiento alcanza su punto más alto y comienza a desacelerarse progresivamente. La planta ya define mejor su arquitectura final, con los brotes laterales alcanzando altura similar a la punta principal y formando una estructura más homogénea. Empiezan a diferenciarse con claridad los sitios de flor, apareciendo los primeros “erizos” bien visibles. La energía deja de centrarse únicamente en el crecimiento vertical y empieza a repartirse hacia la formación floral. El color se mantiene estable, aunque las hojas más grandes pueden mostrar un ligero desgaste propio del esfuerzo de esta fase. La turgencia es correcta y la respuesta general sigue siendo positiva, señal de que raíces y entorno trabajan en equilibrio. Se consolida el paso de expansión a producción. Seguimos creciendo fuerte 💪!
Likes
13
Share
@NOLOGIK
Follow
Fantastic big glu!! Infinite glu! 27/4: sample #B was already cut 4 days ago ... compared to the sample #B I'm still waiting 4/5 days from today .. to be able to cut everything ... they have a strong and many good smell!
Likes
11
Share
@KushManF
Follow
Good strain, strong strain and good grow. Regular seed ended up as a female which was my wish. Happy 😁. The yields were more than I expected. Came in 100g give or take on the scale as wet weight. Did a little bit of trimming on some of the buds, but will see how it goes during drying and curing. Great great genetics and Strain.