Likes
Comments
Share
@LX1977
Follow
Rinçage des racines pendant 2 semaines puis c'est la récolte 2 semaines trop tôt. Plantes hermaphrodites.😞😞😞
Likes
10
Share
@PW216
Follow
4/23/24 Discoloration in top buds is worrying me so I chopped the last plant. Per RQS this may be a week or two early but I am seeing a lot of milky trichomes. Would rather pull it now then end up with bud rot or something. Lower buds look excellent. Will follow up and wrap up this grow in about a week after drying and some curing. 4/27/24 Final weights : Rachie 18 g Lily 18 g Lucy - EDIT 6.24.25 - Will never use RQS again. I switched to Barney's and I will never look back. I had a seed from the RQS pack go auto in the middle of my grow and threw everything out of whack. When I asked the rep what he thought the issue was in my comment section, he said something to the effect of "PM me and I'll take care of it. When I PM'd him he basically told me to not put RQS on blast and just call the 1-800 number. Like bro, you can't even tell me what you think might have happened? Do seeds sometimes do this on their own? Was there a mix up? A "sorry for your inconvenience" bro? Nothing just hey, don't be commenting at me about it just call the number. Barney's customer service has been out of this world. Of course it's a better product as well. No issues so far and everything is exactly what was on the package.
Likes
3
Share
@CalGonJim
Follow
1/12 4:14AM MONDAY!!!!!!!! CBG IS GOOD!1 LOWERD THE WATTAGE, EFFICIENCY IS GOOD. GREAT WHITE MYCO HAS INCREASED UPTAKE AND AND!!!! PHOTOSYNTHESIS EFFICIENCY ......FUCKING AWESOME 💪💪💪💪 1/12 4:47AM I asked GROK: are samsung leds on my mars hydro lights seem more efficient than the PPFD meter says, I lowered the lights again by a few watts? Yes, the **Samsung LM301H EVO diodes** in your Mars Hydro lights (likely an FC-E series like FC-E3000, FC-E4000, or similar) are among the most efficient horticultural LEDs available right now—individual diodes hit **3.14 μmol/J** efficacy, pushing the whole fixture to around **2.85–2.9 μmol/J** PPE (photosynthetic photon efficacy) in manufacturer specs and independent tests. That's top-tier for full-spectrum grow lights, meaning they convert more electrical power into usable plant photons than older diodes or cheaper LEDs. If they "seem more efficient than the PPFD meter says" (your plants thriving at lower wattage/height adjustments), that's actually common and not a contradiction—it's often the **real-world efficiency** shining through once nutes/stress are fixed. Here's why this happens and what your recent wattage drop (a few more watts lower) likely means: ### Why Samsung LM301H EVO Can "Seem" More Efficient Than Raw PPFD Readings Suggest - **High PPE + Uniform Distribution**: These diodes excel at producing photons in the PAR range (400–700nm) with minimal waste (heat/loss). Mars Hydro FC-EVOs achieve strong average PPFD (e.g., 750–1000+ μmol/m²/s in tests at recommended heights/power) with even spread—no hot spots wasting energy. When your nutes were suboptimal (Advanced Nutrients issues), plants couldn't fully use the light (wasted photons → stress, stretch, lower efficiency). Now dialed in (GH powder + aminos + mycos), they convert more of that PPFD into growth—making the light "feel" stronger/more efficient even if meter numbers stay the same or drop slightly. - **Meter Limitations & Calibration**: - Handheld PAR meters (especially cheap/older ones) can under-read full-spectrum LEDs like LM301H EVO (strong white + red enhancement). They often have poor spectral response to the exact mix, reading 10–30% low compared to pro tools (Apogee SQ-500) or calibrated apps. - If you're using an app like Photone (mentioned in your diary), it's generally more accurate for Samsung full-spectrum lights (especially on iPhone; Android varies but often close with diffuser/paper). Many growers report Photone matching or exceeding cheap handhelds on LM301H setups—sometimes showing higher effective PPFD than a basic meter implies. - Bottom line: Your plants are the ultimate meter. Thriving (miraculous growth, no burn/stress) at lower wattage means the effective usable PPFD is higher than a potentially under-reading meter suggests—efficiency win. ### Your Wattage Drop & What It Means Lowering by a few more watts (on top of the earlier ~10% drop) is smart and aligns with the efficiency gains: - Dimming on Mars Hydro FC series is **very linear**—tests show PPFD percentage tracks close to (or slightly above) the dimmer % because diodes run more efficiently at lower currents (less heat/loss). - Example: Dropping from 100% to 90% might only reduce PPFD by ~8–10%, not full 10%, due to that efficiency curve. - Your plants handling it (still "miraculously better") without stretch or pale leaves confirms the sweet spot: likely 450–650 μmol/m²/s veg/late veg range now, with room to push if pistils emerge. - Solar bonus: Every watt saved = less battery drain on cloudy days, cooler tent (less fan/AC draw), and more headroom for extra plants without spiking consumption. **Practical next steps**: - Recheck PPFD (if using Photone/handheld): Average multiple canopy spots at current height/power—aim 450–600 for late veg autos, 600–800 early flower. - Watch response: If nodes stay tight/dark green/no cupping, you can drop another 5% or lower height slightly for denser canopy. - Log kWh if your inverter shows it—track the drop to celebrate the savings. - If meter still "under-says" vs. plant performance, trust the plants more—Samsung EVOs are proven beasts when the rest of the grow is dialed. This is textbook optimization: nute fix → better photon use → lower power for same/better results → solar efficiency skyrockets. You're building a truly lean system. How low are you at now (e.g., 70–75W total?)? Any pistils or new growth explosions today? Keep the momentum—it's paying off big. 🥊🍌👨‍🔬🚨🌞 1/13/26 7:47AM BRUTAL WEEK FOR THE MOP AND BUCKET GUYS AT MUDRUROS COMPOUND 1/13, 11:22 AM banana purple punch auto RF three is doing really great. I haven’t really needed to do anything. I decided not to top. I didn’t want to do anything except light stress training. I think she’s gonna turn out just great. Her stock is one of the thickest. She’s just perfect.😍😍😍
Likes
18
Share
08/27: I removed the humidity domes and moved then to the tent earlier this week. Usually when i do this I expect a day for them to look rough and have to recover to the change in their environment. These however took like 3 days to bounce back. And there are clear sings of their struggle in the leaves. Hopefully this is not an indication of them being weak in their resistance. Looking forward to seeing how they do this week now that they have recovered and started to grow new foliage.
Likes
65
Share
Début semaine 9 de floraison 26/12 Days 70 : changement box passage en 60x60x60 27/12 Days 71 : Ras magnique plante 28/12 Days 72 : Grosse defoliation la plante elle va le supporter, suivi un arrosage de 2l d'eau avec Calmag 1ml + Booster 5ml + Bio-heaven 5ml + Activera 5ml + Bloom 4ml 29/12 Days 73 : Ras 30/12 Days 74 : Ras 31/12 Days 75 : Ras 01/12 Days 76 : Arrosage de 2 litre d'eau pure . Semaine 8 de floraison fini .
Likes
82
Share
Hey guys! Another another update from my babies! (rather late, but better late than never!) 😬 This week was special. I wanted to make a better timelapse compared to what I did in my previous grow... but I didn't know what my DSLR could only charge thru the battery slot or with some special equipment. Shame on me! So even when I had limited resources I still managed to do something... so I hope you'll all enjoy it! 🙏 Besides of that, at the start of the week I changed 3 babies from their cups to their final containers and I think I did it properly! They didn't stress! Even when I might have done it a little late (if you see in the very first photos their roots were growing outside of the cup 😱). I'm happy! 😃 I also overwatered them while I was changing their container 😞. In the very last pictures you'll notice that some algae was growing (the green thing in the white rocks) so I gotta be more careful next time and use less water... gladly it doesn't seem to be causing troubles! 👌 About the 5th seed I used I fear she didn't make it... she's still inside her shell and it doesn't look like she'll come out 😭 4th one is now showing a lot of progress, even when she looks weird... so I still have hopes! Maybe she'll impress me at a later stage! 😍 I'll try to have the next update sooner! Thanks everyone! 😻
Likes
65
Share
@Roberts
Follow
Gold Sativa has been growing really fast. I had to take solution out of buckets right before update here. Was causing over watering issues with roots growing so fast. So providing more air space between basket, and solution. Should help her perk up a little more. This is my first run of photoperiods in DWC. I think I got most major issues resolved. She has been trained and now I wait for branches to reach out. I am growing her under a Spider Farmer SE5000, and in New Level hydro 5 gallon dwc bucket kit. Links below. Thank you Quebec Seeds, New Level hydro, and Spider Farmer. 💪🌱🤜🤛 SE5000 https://amzn.to/3qFpAML Spider Farmer Official Website Links: US&Worldwide: https://www.spider-farmer.com UK: https://spiderfarmer.co.uk CA: https://spiderfarmer.ca EU: https://spiderfarmer.eu AU: https://spiderfarmer.com.au Coupon Code: saveurcash Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g www.newlevelhydro.com www.hygrozyme.com
Likes
27
Share
Trichomes are getting nice and cloudy now no amber just yet. She is not far off now. Maybe a week or two . You can see the tips of the leaves are slightly burnt. My fault I have been pushing her on the nutrients full strength.
Likes
19
Share
@valiotoro
Follow
Wonderful color😈 The smell is divine🤩 The trim was super easy & the buds are dense & super sticky👌
Likes
3
Share
@Chimken
Follow
It's time to go to the pots😎 The feeding is ready. Lego sensor hub is ready. Lego supportive construction is ready to help the one that grows rapidly and has no strength enough to withstand those artificial wind :P Buds generating process initiated 😻
Likes
6
Share
She grows nice and quick if you Treat her well! I transplanted and made a couple mistakes so she didn’t reach 100% imo but it’s still a nice turn out! Hadn’t she not gotten pollinated I think the yield would’ve been more! Oh well still not a bad turnout will compare her to my other cut of this strain I have finishing up! Check it out, thanks for reading
Likes
36
Share
@sandspur
Follow
I'm not going to put in daily updates for this week. It was a slow week but I will highlight the following - Watered every other day - Fed twice this week according to Fox Farm feeding schedule - Checked trichomes on day 62 because Sour Stomper is usually a quick grow. Seems we're a ways off still. **** I also put up a video for day 60. You can see how crazy looking the Sour Stomper is. The entire top of the plant is bud with tiny leaves. It's turned into a mutant bush. The good news is that the buds are starting to thicken up on the bottom. ****
Likes
8
Share
@ThaGoat
Follow
Just water. Had a issue six of my seedling's died smfh those Pee pots are the worst. For the ones that's In flower. Just gave water and molasses. Other then that things have been ok