~ Update ~ Hello my friends, welcome back to another weekly update. I have a few issues going on so I’ll put those below in the IPN. This has been a good week so far, the girls are very happy, except the bazar mazar… Other than that it’s exciting that I’m pretty much at the halfway point :) Anyways, enjoy the update and let me know what you think in the comments, I always appreciate feedback ~ Individual Progress Notes ~ [CBD] Notes: This is the healthiest of the bunch, nice rich green leaves and fluffy buds. I’m surprised the this little mutant is doing so well. As I said in the vlog GCS got back to me last week, I’ll keep them up to date with my grow so they know what’s going on with this girl. [Mazar] Notes: Burn! I’m noticing a lot of small but noticeable spots, leaf chattering, and slight yellowing at the tip of the leaves. I feel like I should just avoid feeding this girl though I’m not sure if that will help the situation. If you guys can take a look at this girl I’d really appreciate it :) Edit: I found out thanks to my friends here on GD that I burned my Bazar Mazar :( So time for water which I might only give her water and flower fuel then flush till harvest (might be my cleanest tasting and smelling afterwards). It's hard to feed 4 different metabolisms every watering, but hey I'm learning :) [Super Silver Haze] Notes: The beast of the grow! What a lovely plant. Even though this girl got really hungry and started cannibalizing the lower leaves her buds are massive! I’m impressed with the total growth of this beast. Honestly, I’m cheering this girl on, might be my favorite (don’t tell the others). [White Widow] Notes: More like purple widow, this dense girl is showing her dark side and I like it. I planned on the purpling, still surprising to see all this purple though. I like purple buds but I don’t want this (or any of the girls) getting shocked by the cold. Hoping the I can get a few more pieces of gear to help out the next grow. ~ Final Thoughts ~ What a week, some of the girls are rocking and the Mazar, not so much :) It’s a learning experience that will take some time for me to learn how to balance all (most) of the variables. Thank you guys so much for all the love and support, I always appreciate it :) Happy holidays and good grow’n fam, much love Meus <3

Watching the grass grow. No still shot for this week just a couple of videos.enjoy!

1 plant was very ripe, 1 plant was almost perfect to harvest and the 3rd could take another 1-2 weeks...but it was end of 10th week of flower and i had to go on vacation, so i perhaps choped 1 plant abit too early....still awesome result!

the last day of light. Two days of darkness and scythe. 10 days only water

Week 12 (17-4 to 23-4) 17-4 Temperature: 23.1 degrees (lights on) 19,1 degrees (lights off) Humidity: 62% (highest) 50% (lowest) 18-4 Temperature: 22.5 degrees (lights on) 17.9 degrees (lights off) Humidity: 61% (highest) 52% (lowest) Opened the reservoir for a couple of minutes. ec 1.4 ph 5.7 19-4 Temperature: 22.5 degrees (lights on) 18.4 degrees (lights off) Humidity: 64% (highest) 54% (lowest) No pictures. 20-4 Temperature: 24.1 degrees (lights on) 19.1 degrees (lights off) Humidity: 65% (highest) 54% (lowest) Light increased from 50% to 60% strength. I also made a new 10L feed, and added it to the reservoir, there was still 2850 ml in the reservoir, so i can calculate how much they get per watering. Opened the reservoir for a couple of minutes. 21-4 Temperature: 24.4 degrees (lights on) 19.3 degrees (lights off) Humidity: 66% (highest) 54% (lowest) No pictures. 22-4 Temperature: 23.7 degrees (lights on) 19.7 degrees (lights off) Humidity: 67% (highest) 42% (lowest) Opened the reservoir for a couple of minutes. 23-4 Temperature: 23.6 degrees (lights on) 17.7 degrees (lights off) Humidity: 64% (highest) 50% (lowest)

Se hizo una defoliacion mas agresiva en la parte baja, aprovechando que las plantas en general entraron lentamente en floracion. Alcanzaron una estatura promedio de 70cm con excepcion de la razuberi que ya esta en los 90cm tamaño espectacular para interior

🔥🇩🇪Daily updates.🇩🇪🔥 I am open to suggestions for improvement. Write me if I do something stupid. I know that not everything is perfect, but I try to make the best of my circumstances.🤓 ——————————————————————————— Germination 01.04.24 - 07.04.24 Vegetation08.04.24 - Today 🗓️ ---------------------------------------------------------------------------- 🌱Day 15 || 😎 Everything is going great so far. I made a time-lapse recording after watering. Have fun with it. 100ml distilled, 300mlEasyGrow, 100ml distilled Humidity 53%// 26°C Light 40% //45cm//420-440PPFD 🌱Day 16 || Watering not necessary Humidity 52%// 26°C Light 40% //45cm//420-440PPFD 🌱Day 17 || I have repeated my watering routine from two days ago 100+300+100. during this time I noticed that some of the leaf tips were slightly yellow. Hopefully this is not a major problem. 🤔(Maybe a slight over fertilisation.) I have already asked a question about this and hope for the best.🙏 Humidity 53%// 26°C Light 40% //45cm//420-440PPFD 🌱Day 18 || The new leaves that have emerged all have a small yellow discolouration of one to two millimetres at the tips. These spots have not become "bigger" in the last 24 hours. I will water again tomorrow with pure distilled water. I hope to be able to start LST in the next few days. She is currently 10 cm tall and the leaf spacing is very close together. Humidity 52%// 25,5°C Light 40% //45cm//420-440PPFD 🌱Day 19 || She had a favourable growth spurt in the last 24+ hours so that I could start with the LST. I only watered her with 600ml of distilled water today. Almost three days have passed since the last watering. (66h) Humidity 52%// 25,5°C Light 42% //45cm//440-455PPFD 🌱Day 20 || Happy 420😁 Watering not necessary Humidity 52%// 25,5°C Light 45% //42cm//460-470PPFD 🌱Day 21 || Lots of yellow tips but the new leaves look better. Watered her with 1200ml of distilled water Humidity 52%// 25,5°C Light 50% //50cm//490-510PPFD

what a long but fun 5 months we are now just waiting for the drying and then balls to the wall

I just noticed my PH has been around 7, and a couple of the seed mothers are showing CAL/MAG deficiencies.. I use well water, and I don't have to adjust it in the summer, but around late fall the PH raises. I forgot to get good pics of the seed mothers, since I was focused on the STS formulas at the time, but these are the Pollen donors transforming into male flowers. 5 weeks old. The seed mothers are coming along nice with dime sized buds on them. I Topped them all at the 5th node, just before the cola, so the canopy would all be even under the lights. I just sprayed these reversed buds 1 time only on day 17, after the first STS treatments, with 50ppm of Gibberellic Acid (GA3) to stretch them out away from each other. Gibberellic Acid causes plants to stretch enormously, and PPM's of 50 to 100 can cause females to reverse to males.

Day 22 giving #2 plant bent her over 24hr lst none for #1 plant. Day 23 #2 plant with lst has shown real big growth. #1 plant no lst and not growing fast. #2 lst ties off now just doing leaf tucking to bring out bottom branches. This process does work. Day 24 filled resivors add my nutrients and got 700ppm with 6.6 ph . Room temp. 78 humidity 47 Day 25 all is good plants growth is great. Day 26 growth is good doing leaf tucking lst on both now. Day 27 #1 little leaf tucking doing well #2 much busher then #1 lst is good for this strain. Day 28 a little defoliation on both

📆 Semana 5 ¡La Swag MDC sigue sorprendiendo! 🌸 🔹 Desarrollo floral: Las flores están creciendo a buen ritmo con tricomas ya comenzando a aparecer y las primeras señales de resina cubriendo los cogollos, la planta está mostrando su potencial y cada día se ve más fuerte 🔹 Tamaño y estructura: La planta sigue desarrollando una estructura robusta con ramas laterales que se extienden uniformemente, los cogollos son densos y prometen una buena cosecha si todo sigue bien 🔹 Condiciones ambientales: La temperatura ha estado entre 24-26°C durante el día con una humedad más baja, alrededor del 50-60%, para evitar problemas de hongos en los cogollos, esta variación de humedad ayuda a la resina a desarrollarse correctamente 🔹 Nutrición: He comenzado a ajustar los nutrientes con XpertNutrients siguiendo el esquema recomendado para la fase de floración, la planta está respondiendo bien a la cantidad de nitrógeno y fósforo y las hojas están verdes y saludables, sin signos de deficiencia 🔹 Equipos utilizados: Los Adlite de Mars Hydro siguen funcionando a la perfección, ofreciendo una luz adecuada para el crecimiento de los cogollos sin generar un calor excesivo, estoy muy satisfecho con los resultados y cómo la luz favorece la producción de resina y la densidad de los cogollos 🔹 Observaciones generales: La Swag MDC está desarrollándose muy bien sin signos de estrés ni plagas, la planta está concentrando toda su energía en la producción de flores y resina, no he tenido que hacer ajustes drásticos ya que está mostrando un buen equilibrio ¡Seguimos creciendo fuerte! 💪

Had a little stretch due to heat and had to higher lights. Bud gaining now day 21 today in flower happy where they are done alittle trimming of some fans blocking bud sites.

I moved the lamp away from the plant, and it seemed to have a good impact on the yellow leaves. The plant is over 50 days old so it's starting to develop some yellow leaves just from age. I really am enjoying watching the buds fat and up but I'm a little bit nervous because it only has about 20 to 25 more days and they don't look very fat.

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 REMO NUTRIENTS 👍 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

All pictures are of Citrus Farmer S1'S One plant seems further along, and is what I am looking for. All reek of orange peel. All plants were flowered early, and are small. Growth seems slightly slow. But the orange peel is there. I wish I had my pollen right now. It didn't work out this time. But I still have mom. 😈

She has been in the greenhouse OUTSIDE for about 10 days now. I do have supplement lighting and air circulation in there. Running 2 450 watt advertised full spectrum tripple led cobs with an 120 watt true draw per unit. So 240 watts from the plug in the green house. I run them as supplemental on cloudy days and an hour or 2 before complete sunset. I have began flushing towards the end of this week. She was fed 1/4 strength nutes DAILY up to this point. Now only TPS signal and molasses to flush her with. I plan for a 10-14 day flush. The last 4-5 days i will drop the molasses and run straight TPS signal and ph tap water. I am now begining to see the swell towards the end of this week....i am happy about that! I hope those calyxes get nice and fat during this flushing. So far so good.....she has taken to the green house well!

Excelente

Día 09. Segunda semana de crecimiento. La planta sigue creciendo a un buen ritmo. Ya pronto voy a agregar un bioestimulante de crecimiento y algunos microorganismos. Probablemente esta semana también haga la poda apical. Día 14. Le hice el corte apical el día 10. Ya está recuperada y creciendo. Por el momento mantengo la solución. Mañana seguro ya cambio y le agrego un bioestimulante de crecimiento. Aún no fui a buscar las bacterias, pero esta semana tengo que ir sin falta. Ya voy a ir preparando la parte de arriba para cuando lleguen los esquejes. Pero una vez que corte, tengo dos semanas de enraizamiento. Por lo cual todavía falta. Pero ya está todo encaminado.

Starting week 7 Should be finished around dec 25th 85days