This week ia am planning to let it grow just like this. Hopefully I will receive a plant camera next week to monitor my VPD. Also added an IRheater to keep temperature stable The infrared heater does its job, but I find it a waste of electricity, 3.6 kWh in one night. So I've decided to install a gas heater instead, which delivers the same result at a much lower cost and also provides additional CO2. The heater can then keep the temperature above 21˚C with the lights off. The natural gas heater will be used with the lights on. I need to quickly find a CO2 sensor because too much CO2 has a counterproductive effect, as I've already noticed. Approximately 1200 PPM at 32˚C is optimal as long as I can maintain a DLI of 35. Great technology is on the way. Added: Installed CO2 burner, run it for 6 minutes every hour. Temp raises from 22˚C to 27˚C in about 7 minutes. CO2 detector (just colors, no values) doesn't alarm so not above 1500PPM CO monitor also no alarm :) Running for 4 hours now and a visible change is there. Tomorrow I will know if it is ok or not. Added a few pictures. Lets see if we can see the difference tomorrow. 26-05: Added Dimlux Maxi controller for CO2 and VPD. Works nice. 28-05: Topped a few 31-05 Added additional 300W to heat the stuff up. RH is stable but high on 72%. Could add a dehumidifier but since CO2 is already there and my VPD is around 0.8 I thought adding light would be cheaper. Can go up to 33˚C before my floor is heating up too much. Also cleaned the watertank. So from now on they are on Ata Max

Hi guys! Last week I topetd them,and removed the lowest coals.Next week gona put them under a net.I watter them every two-thre days.

OK guys I've shut them down to 4hrs light a day for 2 days now. They have really filled out those buds and are looking extra sugary. I have been watering with 140ppm water at 6.2-7 pH with flawless finish for 6 days now. I have just given them probably the last watering will leave them for another 3-5 days on 4hr schedule before turning lights off for 2 days and then harvesting. Next diary will be the harvest!! I hope nothing goes tits up from here😂

Flowering day 19 since the time change to 12/12. Hey all together 😀. This week she has developed beautifully ☺️. I poured it 3 times with 1.2 l this week. Tomorrow I will add the 2 g GHSC Powder Feeding Bio Bloom because the first blossoms are coming :-). I checked all the leaves thoroughly for pests or diseases and everything is fine ☺️. Next week I'll look at your roots as soon as the coconut is completely rooted. As every week, the tent was cleaned and the entire technology checked. The humidifier was also refilled every day 👍. In the next few days I will remove the bottom shoots so that the energy doesn't end up being wasted in the small popcorn buds. I wish you a lot of fun with the update. Stay healthy 🙏🏻 and let it grow 🍀 You can buy this Strain at : https://www.royalqueenseeds.de/feminisierte-hanfsamen/220-pineapple-kush.html Type: Pineapple Kush ☝️🏼 Genetics: Pineapple x O.G. Kush 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: GHSC Powder Feeding Bio ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .

Doing amazingly! Actually started flush literally today! So stay tuned to see how chunky these flowers are going to get! They smell delicious! Candy shop in my tent with all these flavours!

Hi buddz and buddettez how is it growing?😁👍 So another week ended into the greenhouse, fall is kicking in hard and temps dropped to 17 celsius daytime. The tomatoes are almost done, did it extremly well and what a taste and colours this year it was amazing. The Runtz is full into flowering, producing some very decent buds. I am very impressed by her, the canopy is looking great, nice evenly spread, and hopefully by having her lollipopped al the way up to 1 meter, the mold will back off this time🤙 To really go in war with this bud eating sucker, i added a fan to keep the air flow maximized. Lets hope for the best, the days are getting colder and wetter and so is the inside of the greenhouse😁🙌 The Santa Maria Auto doesnt want to grow up, stuck in her dwarfish bubble, i planted her to late into the season, better of next year. She will be one of the first to pop cause she needs to be finished mid summer were the climate is the most dry. The Blue Gelato 41 Clone is doing fine, after she rooted she could only grow/acclimate 2 weeks befor going into flower, top bud seems to be a fatty little one😋 Last water feeding was about 5 weeks ago, they never complained, the tomatoes burst when you water to much, beside that the ground is kinda slope towards my greenhouse, so they pick up alot of water from underneath😁🤙 Have a great week all, enjoy life to the fullest and happy growing

Week 5 of flowering 10/16/24 Changed nutrients to fit week 5 Buds are getting bigger and thicker. Defoliated plants. Watering 4 times a day (with 10%-20% runoff) hand watering to full saturation of the media with 20% runoff at the end of the week. Checking runoff EC every 3 days. Lights now at max height and 90% power. After replacing the exhaust fan timer, didn't notice ant issues. Adding 2.5ml/gal of H2O2 (35%) to the reservoir to keep bacteria away.

Drunken bitch Slap has been growing really well. She was switched to ph water 4 days ago. I am looking to harvest her in about 8 days. She grew great under the Hortibloom Solux 350. Nice frosty, and sticky colas. Everything is going great. Thank you Hortibloom, and Aeque Genetics. 🤜🏻🤛🏻❄️🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

Fastbuds Frostbanger 75days from seed

Day 15 🌱 everything is going well but I have accidentally decapitated N1, in reality I had topping already N3 but with N1 I broke without doing it on purpose. hope for the best. Day 16🌱 wow today N1 I see it well it does not seem to have accused the topping. everything seems to be going well for N3 too, he seems to be growing very strong. N2 is in excellent condition. Day 18 🌱 i am struggling a bit with "lst" but i guess because i started early. otherwise they seem to be growing well Day 20 🌱 I let them rest for two days. some training again today, they look fit and grow great. Day 21🌱 N1 and N3 grow great and look great. N2 grows well but has yellowed leaf tips as if I had given too much fertilizer, I think due to the pre-fertilized soil. Now I continue with water and I will check the drain ph Thanks for viewing. if you like my diary leave a like and a comment. come back to see me 🎂 good cultivation and good day💚🌱

She's made it! Harvesting before any more degrading happens. Worried I screwed her by letting her go without water, but she seems pretty vigorous. Here's to hoping the dry goes well, got her in a tent that's properly vented and has a fan inside blowing air underneath the canopy (not at the plant itself). Its kept between .78 kPa and .9 kPa VPD wise. Hopefully it has enough air exchange that mold won't be a problem. Check back for updates on how she's looking through the dry! I will also add more pictures when she is trimmed. Can't wait to see her buds then.

Just got done with trimming the 4x4 @greenhouseseedco Super Silver Haze / @blimburnseeds Silver Surfer Haze tent. The final yield is exactly 1000g plus some (kind of a lot)that I smoke in the last 2 weeks 😃 Also got 6, gallon size ziploc bags filled with good quality trim for concentrate. To be honest I was expecting a little more but keeping in mind that this grow I did not supplemented with bottled CO2 I think I’m good with the results. Definitely I enjoyed a lot this grow and I’ve learned even more.

12.9 4th veg week done and girls are now in new 11L pots and I also topped them yesterday (12.9) All healthy 👌 They got used to new homes almost instant. I decided to top all plants now when pretty small and I try to make 6-8 tops to each... hoping they fit 😂 All 3 Strawberry Lemonades are very similiar.. same height and branching about the same also, nice 😋 I'm gonna insert netting there and use some stakes also to part space for plants.. Ok that's it happy growing everyone!! 👽🙏

Day 42. General Hydroponics maxigro every other watering. Frosting up nicely.

Flowering day 73 since time switch to 12/12 h. Hey guys :-) Finally the time has come . The lady was harvested and hung upside down in the dry tent 😍. Before that, she stood in the drying tent in complete darkness for 2 days and the large leaves were removed. The small leaves stay attached during the drying process so that they protect the buds and allow them to dry more slowly and evenly :-) . In the dry tent, the temperature is 18-19.5 degrees and the humidity is 54-58% 👍. In this environment they are now allowed to hang for 10-14 days before they are fine-tuned and trimmed clean by hand. then after trimming they come to ferment for 6-12 weeks in dark jars with bobeda packs 62% to keep the perfect humidity. After a few weeks, the Boveda packs 58% are used so that they can slowly dry out :-) . Of course there is one last update after trimming. Until then, I wish you a lot of fun with the update. Stay healthy and let it grow 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : Clearwater Seeds Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.5 MadeInGermany

Al final de la jornada realizamos poda apical

📆 Week 9, 7-13 December 2023 7-13 December - Continued with simple adjustment of branches to receive maximum light. There was no defoliation of any leaf this week. Her growth rate has slowed and I believe she is heading in to the bulking stage. I’m satisfied with her size at this point. 8 December - Turned light power from 50% up to 75%, and raised lights from 18” to 21” from top of plant to facilitate the bulking phase of flowering. 📑 Let’s briefly discuss light and umol/m2/s or PPFD. First of all its all about numbers. Is there an agreeable starting point on these figures - the cannabis plant requires between 100-300 PPFD in seedling, 400-700 PPFD in vegetation, and 800-1000 PPFD in flower. It can go up to 1500 PPFD with certain C02 concentrations. I believe this may be generally accepted. Never being much of a numbers person, in ways I avoid it. I’ve grown indoor weed for a long time without a fancy device to tell me what this number was, the plant did that. A quality light and the plant itself will talk to each other in a matter of hours sometimes, days in others, I just need observe. But what I have come to realize the past few years is that these numbers, found in simple instruments (apps for smart phones) give us a very specific area of where she is within all these spectrums. It allows us more precision and insight to what would otherwise be a possible weak or vulnerable spot within our grow. I’ll use mine on a new strain, and to verify any questions. They are easily accessible tools for the common gardner. When we adjust our lights we can measure what will be optimal for our plant. Using my case in point; from: 50% power or 890 PPFD at 18” to: 75% power or 1080 PPFD at 21” **if not raised 3” - that number would have been 1320 PPFD - likely damage the plant - or raised any higher there would be no real benefit in what I’m attempting to achieve - likely waste of power** The 2023 ViperSpectra XS2000 lights (the ones I use) come with a new switch now that go from 25, 50, 75, 100% power and no option in between. So that kind of put a kink in a week or two during my grows I have to work around. Going from 50-75% power is a big shift in light intensity, and these lights are bright. Knowing what that number is and being able to adjust the height precisely to avoid damage is reassuring. I appreciate advancements that make growing a little easier. In most personal grows during flower I’ll go well over 1000 PPFD depending on the strain tolerance, without C02. Here are my experiences why: 1) my set-up allows it, 2) that number only reflects the greatest reading at the highest point on the plant - my reports, 3) when the plant is budding it is absorbing much more photons than when in the leafy only stage - everything is accelerated - this is a totally different discussion, 4) the additional light provided will proportionally increase a higher yield, and finally, 5) some of todays theories on light will change in 5 years, as it has from 10 years before, we still have a lot to research. LEDs are definately cream of the crop, but there is something new to learn I’m sure. Until then I can only tweak what I have in search for a tighter bud, higher in THC. I said I would briefly discuss this subject. Everything is possible with lights. It is science that says the cannabis plant does not have to produce secondary metabolites (trichomes and cannabinoids), in some cases it may not. It produces them based on its environment. She returns to you what you dedicate toward her. Something to keep in mind when deciding what kind of light to use to while trying to grow quality cannabis. 🍽️ Nutrient change on 7 December 🐲 Feeding schedule updated 7 December 🌊 Using reverse osmosis water with EC/TDS at 0 🐉 Nutrient Solution EC 2.1 at 65 degrees F 💡 Light power at 75% That is it for this week. Thanks for the look, read and stopping by.

Great start for the week, I have increased Bloom today,as well did cut some fan leaves blocking lights to colas. So far so good happy with my first grow.