🌿 Schönen Sonntag & einen entspannten 1. Advent aus der richtigen Zeitzone =) 🌱 Wochenupdate Diese Woche wurde echt viel gefummelt 😄 Im Fokus standen Canopy-Aufbau und selektives Entlauben =) Bin da wirklich pingelig und könnte das den ganzen Tag machen… echt schlimm 😅 Was ich jetzt schon sagen kann: Blueberry Cupcake hat mit Abstand den krassesten Stretch hingelegt. Purpz hat ihren Platz auch relativ gefüllt, performt echt gut und ist fast gleichauf mit BBCC. Notorious zieht auch, soll aber wohl etwas später definierter drücken. Mir gefällt ihr Wachstum richtig gut. Guzzlerz macht sich auch echt gut für ihren schlechten Start. Ihre Sides gehen mittlerweile richtig steil. Ein paar mehr Triebe wären nice gewesen, aber da lag sicher auch einiges an mir.. :D Abseits meiner Dummheiten lief alles absolut smooth. Eine tolle Veg und richtig gute Stretch-Phase bis jetzt =D🔥 🌿 Pflanzenstatus & Training Ich halte die Canopy aktuell noch flach – für zwei, drei Tage =) Anschließend steht das Verteilen auf die Meshes an. Danach dürfen sie endlich nach oben =D Die Richtungen sind grob gelegt, erste Ansätze sieht man auch schon =D Ich kann’s echt nicht erwarten… Budporn ist einfach magisch 😄🔥 Über die Tage sind immer wieder größere oder verdrehte Blätter rausgeflogen – hauptsächlich, um Luft und Licht auf möglichst viele Triebe zu bekommen 😊 Man kann wirklich ohne Bedenken ~30 % Biomasse rausnehmen, wenn die Vitalität das zulässt, ohne sichtbaren Stop im Wachstum 🌱 🌬️ Luft & Ventilation Hab jetzt noch zwei Clip-Ventis dazugezogen. Die Angst vor Schimmel kickt langsam wieder =D Es laufen jetzt zwei unter und zwei über der Canopy – jeweils gegenüberliegend und zirkulierend. Ich muss gestehen, dass ich den Boundary-Layer-Disruption-Effekt kenne bzw. davon weiß, und ihn durchaus stimmig finde 😊 Aber bis jetzt war die Angst vor Schimmel in irgendeiner Ecke doch größer 😂 Ich hab nicht den Eindruck, dass es negativ ist, zirkulierende Luft auf die Pflanzen zu richten, solange man nicht voll draufpustet 💨 ⚙️ System Läuft nach wie vor stabil =) Die Top-Ups halten die Nährlösung sauber auf Kurs. Gestern hat sich klar abgezeichnet, dass wir mitten im Stretch-Peak sind 😄 Sie ziehen massiv Kationen und verursachen dadurch einen deutlich messbaren pH-Drop. Das ist für mich das Signal, das Training in den nächsten Tagen zu beenden 🌿😊 800 PPFD 1,0 kPa VPD 700–800 ppm CO₂ im Durchschnitt 💚 Special Mention Der Aufwärtstrend setzt sich fort 😊 Man mag es kaum glauben, aber sie macht sich wirklich gut – sie deckt sogar etwas mehr als die Hälfte ihres Quadranten ab 💚 Bin echt froh, dass sie es geschafft hat und meinen Scheiß noch mitgetragen hat 😂 Danke fürs Lesen echt verrückt, wie viele inzwischen dabei sind – freut mich wirklich mega 😊💛 Eine schöne, entspannte Adventszeit euch allen 🌲😊

La cosecha fue bastante buena. La planta dio un excelente rendimiento.

7/5/25 plant is stretching. Not sure if its preflowering or just being outside in a bigger pot. Im just going to let her grow naturally and see how it turns out. I may end up with just one diary of each strain at the moment. But im also not sure whether im going to be doing indoor or outdoor based on personal circumstances.

10/5 Day 31. I've added a dehumidifier now that the plants are starting to show signs of pre-flower or flower. Maybe one of the expert growers can let me know. :o) 10/6 Day 32. I did some more defoliation to open up the air flow at the base of the stem (mini lollipoping). I also re-arranged the pots and lifted the air pumps so that I could have more room for training them. This should also improve air flow. I moved the rotating fan so that it is pulling air from the lower tent intake. Move the 6'' hurricane fan so that it is blowing down at the center of the tent. More LST training after giving everyone some more "elbow" room! I will allow them to recovery for a few days after the defoliation, but will keep adjusting the LST wires. - Added 1 gallon of purified H2O to each plant. No signs of any deficiencies on the leaves. Nice and Green with new nodes popping up (I think). Red - PH 5.54 TDS 703 EC 1.459 Blue - PH 5.77 TDS 735 EC 1503 Yellow - PH 5.6 TDS 693 EC 1.482 Blue (runt) is finally showing a growth spurt and has almost caught up to Red who seems to have healed from the partial stem tear. Yellow seems to still be the front runner in size and horizontal stretching. I will continue to train them until they definitely show signs of vertical growth and bud formation. At that time I will switch over their feeding to decrease N and increase P & K. SO far the GHE products are doing well, I might switch over to advanced nutrients for the next grow. Roots in all 3 pots are filling up and are still nice and white. Thankfully I am able to keep the water temp around 74-75 F. The UC Roots product is doing it's job as well. As of right now I'm not using any type of extra CO2 generator, but have watched some videos on You Tube on making a DIY. I wish there was more community involvement on questions and the need help section of this site. Also a lot of the You Tube sites that claim to cater to the "beginner grower" seem more interested in their "hip" music selection, video shots of their plants, and talking a lot of nothingness just to get viewers, verses providing quality content to really help the newbie growers. Ok off my soap box. I am really enjoying this grow and today after spending about an hour in the tent it was quite relaxing and therapeutic tending to the plants. 😊 10/7 Day 33. Rest in Peace Eddie Van Halen! Your influence in rock and roll will always be remembered! Feeding day! I am liking the 4 day schedule giving them 1/2 of the weekly recommended amounts per a consensus of growers who all say it's better to feed a little less, and make any additional increases as needed. The extra day helps to spread it out too. Also the importance of looking at the plants daily to see if there are any issues. Yellow is drinking more water that the other 2 and is still the front runner in overall growth and size. To think Yellow almost didn't make it past the seedling stage due to a "stretching bend" injury during week 1. - Amounts total in 4 gallons. UC Roots 8ml, CalMag 5ml, Micro 6ml, Gro 2ml, Bloom 6ml. These amounts are overall as the pots have 4 gallons of water in them. I adjusted to pot size in the description above. I made some small adjustments to the LST wires. All of the plants are now competing to who will become "Top Cola." I've also decided to name the plants per their growing pot color. Ruby, Bertha, Yuki. I picked Bertha as she was the runt, hopefully the name with inspire a great weigh in on dried flowers! 10/8 Day 34. Plants showing some signs of heat stress. I raised the lights up 2 inches. Now that I'm in flowering, heat and humidity reduction will get more of a focus. Tested the PH and it dropped to 5.2. I re-calibrated the pen just to make sure. Since they are starting to really drink more water I added 1/2 gallon of regular tap water that had been de-chlorinated. Checked PH 3 hours later and it is back up to 5.8. I have some PH up solution that I use for the aquarium, so will decided if I should adjust PH with watering using purified store water to lower PH and tap water to raise it since I anticipate them needing a gallon of water added every other day. Or I could just PH up the store bought water. 10/9 Day 35. Heat stress seems to be subsiding, but have noticed a few of the leaf tips are showing signs of nute burn. Overall they are looking great. I will monitor the leaf's for any additional issues. I know autoflowers like to be under feed compared to what the fertilizer companies recommend. I might look at going to a feed every 5 days using 1/2 of the recommended feeding amounts, along with seeing what the plant leaf's, water chemistry is telling me. As this is my first Cannabis grow it feels like I'm trying to "learn how to fly this particular model while I'm building it!" Anyone else feel like that on their 1st grow? 10/11 Day 37. All is growing well. Added a mixture of store water and tap to make adjustments to PH dropping. Each girl needed 1 gallon of water. Flowers are starting to grow :O) Ruby - PH 5.0 TDS 786 EC 1.651 (added PH up water to correct and an extra dose of 5ml UC Roots) Bertha - PH 5.96 TDS 858 EC 1.831 Yuki - PH 6.09 TDS 753 EC 1.725 Week 5 Lessons Learned: 1. Bought some Botanicare Silica Blast for the next grow. 2. Need to ensure the lid holes for adding water, and the air stone line is placed correctly with the water level sight guage. Yuki (Yellow) will need a new lid for the next grow. 3. More and a bit larger bore drill holes for the LST tie down points on the edges of the lids.

Hello fellow grower Starting directly under the Mars Hydro FC6500, seedlings are doing very well (see inputs for distance). The dimming is at maximum power. The light footprint might be a bit oversized for only 20 cups. Technically, for a commercial crop you can stick 1.2 sq. meter of seedlings without any problems. _________________________________________________ Barney’s Farm seeds are as usual, very vigorous ! All the seeds germinated in 24h to 48h. I’m just waiting after the Vanilla Kush to come out from the soil. _________________________________________________ Cellmax BIO Soil is perfect, you can start seedlings with it without risking to burn them. _________________________________________________ Seedlings stage tips: - adding a rotating fan, far enough and on first speed, blowing very gently on the seedlings, will stop them going looney and stretching a long weak stem to reach the light. - fill up the cup with soil, give it a good watering, then plant the germinated seed in the wet soil. _________________________________________________ 24/08 Cup, Water pH 6.5, LT TB 25/08 Cup, Water pH 6.5, AG Bba K Bad Azz 26/08 Cup, Water pH 6.5, Vanilla

An interesting discovery was made with this plant’s pot, I observed how having a row lesser of drainage drastically effected how I water this lady. Her grow medium swamps up if I maintain a 1lt daily water schedule, which would result in drowning the roots, luckily my grow medium has sponges up when wet, allow the slow irrigation to take place to avoid root rot. Luckily it’s spring time and in Mzansi(South Africa) it is hot enough to push my greenhouse’ temperature higher than the outdoor temperature, to encourage some form of evaporation and humidity, next week I will add pictures of the thermometers, and you can see the drastic difference in temperature.

buds start to fatten up in the dwc

Week 8 in the books, cruising to the finish line two more hard watering each and 48 hrs of darkness starting Friday. Genetics: Natty Roots Seed Co Instagram: @green_house_lab

Hi everyone! It's my first time on GrowDiaries and I am super stocked about it! Will be growin some badass strains from Russian original breeder-seedbank Kalashnikov Seeds. All seeds germinated perfectly and I can't wait to put them all in soil right away.

We successfully completed week 8 and things are starting to get interesting. The buds have grown significantly in size over the last days and the smell has gotten much stronger. I think I also need a new air filter… The leaves did some coloring in the past week which makes this beauty look even more handsome. I optimized the air intake of my tent this week by replacing my one 100mm tube with two 130mm 3d printed light traps so breathing is much easier now and the vent can run a bit less fast.

Going into flower on 4/10. Plants have been growing and inch or two every day. Suspect front middle and back middle to be males.

All good this week too. The strawberry lemonade turning purple!:)) gg#4 it’s a hermy… the other plants are good! White widow xxl it’s the first to harvest…In 3 weeks…. Fxxk

- Day 63 of Flower Light reduction to 50% - Day 65 of Flower Last time Watering - Day 67 of Flower Lights out for 3 days - day 70 of Flower Harvest Trichomes are about 15% amber and 80% cloudy with 5% clear Temperatures for drying gonna be 19°C and RH around 55%. She is looking beautiful and her Smell is so intensive you cannot unsmell it. Its Loud! Has Some Fruity (Plum or Tangie like), Soapy and Floral Notes to it. Smokes like a champ and in adition also a purple washer!!

So the final day has come. Day 115. Wow she took 4 months! I struggled a little bit with cutting her, I had to do it with a handsaw. She is a chunky girl! I partially trimmed the plant, mostly removing any fan leaf left and any big leaf without trichomes on them. I consider this more of a pre-cleaning and not a real trimming. That will be done after the plant has dried in about 2 weeks It was quite nice to document my grow. This was my 3rd one ever. I will continue with the grows and journaling because it really makes things sound clearer in my head.

Started up the UV lights, set to turn on for an hour in the middle of each day's light cycle. These additional wavelengths being absorbed will add flavor, and the plants will also respond to the radiation by stimulating resin production. Flowering is really starting to kick into gear, looking and smelling better every week, and I'm hoping for some real chunkiness on those stems come harvest. Been doing a bit of semi-flushing my medium with PH'd water as my runoff ppm's have been getting a bit high, suggesting a little salt buildup. The Amnesia's been doing well, with its striking haze-y terp profile showing strongly as its buds continue to swell. The Gorilla blue has only four larger colas, and has otherwise basically formed into a kind of blueberry bush style structure, with small sparkling nuggets densely blanketing the canopy. The Lemon Cheese is looking frosty as all hell, with many medium sized colas additionally packed densely together and continuing to develop. The Purple Queen is getting purply and has a ton of large colas, looking like an absolute dream, and still with a solid three or four weeks of flowering time to go. Only time will tell what is the true quality of these genetics. But it's been a fun ride so far. Cheers, World

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 ATTENTION GROWERS!!!! BEWARE OF A SCAM COMPANY.... GREEN BUZZ LIQUIDS WILL SAY THEY WILL SEND FREE FERTILIZER BUT THEY MAKE YOU PAY THE SHIPPING WITHOUT TELLING YOU AND THE AVERAGE SHIPPING PRICE IS $100. AND THEY WILL GET ANGRY AND RUDE. THEY TOLD ME TO SUCK IT UP AND BITE THE APPLE🤬🤬 AND THEY TELL ME THIS RUDE CRAP AFTER THEY TOLD ME I NEVER EVER HAVE TO PAY OR WORRY ABOUT FERTILIZER EVER AGAIN... BS YOU RUDE, LYING GARBAGE COMPANY 🗑️ POOR QUALITY NUTRIENTS WITH VERY POOR AND RUDE CUSTOMER SERVICE AND NOT WORTH THE PRICE TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

This wedding cake is looking as healthy as her sister however she's in a bigger pot 25 liters. Let's see if she does as good as her sister,she's enjoying life right I don't think I'll have any type of issue,she's being fed 100% organically,with lactobacillus liquid made by me,liquid bat guano,and she has in her soil florians living organics and more bat guano and seaweed,mycorrizae,humic and fulvic acids,beneficial bacteria and fungus. She's gonna be a wonderful plant at the end I'm sure. Stay tuned guys! 💚🌱✌️

Slight ph

***Sponsored Grow*** = Medic || https://medicgrow.com || Grow = ***Sponsored Grow*** Plants still looking good from last week, the yellowing has seemed to stop spreading, still some dull green in some leaves, I think I was under feeding them, but runoff says otherwise. Noticed some more pink/purple stems on the plants and decided to increase the phosphorus content in the feed by mixing in half grow and half bloom from the nutrient lineup. I'd use the PK booster I have but its to high in K for my liking. The entire lineup is very high in K. mixing grow and bloom gives a NPK ratio of 7-7-14 then done 1:1 equal parts. Grow=8-4-15 Bloom=6-10-14 Boost=1-15-30 Run off was a bit high for my liking but only seeing minimal signs of nutrient burn. Still watering once with feed and runoff and then later in the week with water and no/little runoff for my watering cycle.The number in the nutrient section are wrong but the EC and ratio are correct. Also impressed the roots have started popping out the bottom of the container already after only being transplanted for a week. Good root growth on these ones. Lights doing well. The V1 spectrum is good on the medic grow mini sun-2's 240w. No issues so far, dimmed at 80% . Till next week. ***Sponsored Grow*** Official Website: https://medicgrow.com/ + https://seedstockers.com/ Facebook: https://www.facebook.com/medicgrowled + https://www.facebook.com/SeedstockersBarcelona/ Twitter: https://twitter.com/medicgrow + https://twitter.com/seedstockersb Instagram: https://www.instagram.com/medicgrow420/ + https://www.instagram.com/seedstockers_seeds YouTube: https://www.youtube.com/channel/UCNmiY4F9z94u-8eGj7R1CSQ + https://www.youtube.com/channel/UC4GiFYrIWeNtwtXjcivCmfw Growdiaries: https://growdiaries.com/grower/medicgrowled https://growdiaries.com/grow-lights/medic-grow + https://growdiaries.com/grower/seedstockersofficial https://growdiaries.com/seedbank/seedstockers