*Increased PPM from 750 to 850. Possibly 900. *Noticed some of the leaves showing deficiencies. *Transplant will be in 1 week for sure this time.

This new 2 x 2 x 55 design packs everything you could want INSIDE a 100% Wi-Fi / Smart enabled grow cabinet; including a reservoir chiller. You can easily adjust and view all your variables remotely. No more guessing or endless A/B testing. We’ve been running this new cabinet design empty for 10 days. We can keep the temperature within 1-2 degree, and the humidity within “2-4%” of our desired schedule (excluding full room exchanges); INSIDE the grow cabinet. We are implementing dual humidity system, so we will have adequate humidity inside this box without swimming in the high humidity in the office. Should help significantly with keeping LVPD in check without turning my desk into a swamp. Secondary humidifiers on the way. Three seeds are soaking today. Maybe I’ll have something in the hopper soon! Just created some software logic and added secondary humidifier into the grow box today and was able to bring the the humidity differential into check. I don’t have much faith in this 2 liter humidifier but I have room to squeeze another in on the other side if it drinks too fast. It’s on all the time with exhaust requirement. I can now keep my office around 50% and the box in the lower 60’s at canopy, with a 5-6 degree temp differential between the inside box and ambient. WAY better since I have to work in here too, and will get me in an ideal LVPD range. To get in the 60’s inside the box before meant my humidity in the office was close to 80% at times. Yikes. No dice with the “m” word. We’ll see how all the tech plays together for the next day or so. Beans should pop in the next day or two? Today added smart energy monitor outlet on grow cabinet and another for heating, cooling, humidity and circulation. This configures into our app too! System is just about dialed in with all variables in check. One bean crack today, so time to get the loose ends tied, and let her do her thing. All three seeds cracked today. Stuck them into 3 mini humidity domes filled with RW, and placed them in the grow cabinet.

26/05/2021 (Day 71) Se realizo un nuevo cambio de nutrientes y las plantas vienen mas felices que nunca, no se observa ni una carencia en las hojas y los parámetros se encuentran muy controlados. 29/05/2021 (Day 74) Se agregó 20L de solución, las plantas vienen muy bien comenzándo el engorde de una manera muy optima. El espacio de cultivo está repleto 100% en conjunto con los 600W en 8 chips de Citizen que logran llegar a todos los puntos de la carpa.

Dam the smell coming off the tropicanna cookies is bomb a very tangerine 🍊 smell.. The banana runtz is more fruit yet skunk overtone ... Both are growing great besides one issue I moved my light down 4 inches over the two and got some slight burning on a few leaves so moved up again.. They both have been given minimal nutes and a microbial mass additive since before flowering .. The next three weeks will be awsome as the buds spread and build size ..

7/6: Heavy thunderstorms last night and half the day today, so they won't be ready to eat again for a few days. I went out to the site about an hour after it quit raining today and saw HUNDREDS of tiny little green grasshoppers feasting on my girls!!! I immediately sprayed them all down with pyrethrins, and did it again right before dark. I've got the fan blowing across the pots to try to dry them out faster. I started using TPS One (one part nute solution) the other day, and the plants seem to love it. Really growing well, but I'm glad I amended their soil with some happy frog fruit and flower granular fertilizer this time. They get fed whether it's too wet or not. 7/7: Sprayed for grasshoppers again this morning...hungry little fuckers...👺 It was a very cloudy day...but these girls are also just a couple of feet beneath 470w of 3000k LED's all day/every day, so it's always sunny.😎

Week 6 already! The buds are getting more and more tricomes and slowly getting fatter, we also gave some PK but i think it was a little too much combined with the palm tree ashes in the soil, but nothing to worry about, we wil lower the dosis and start the flush next week 😁👌

Was a normal week for a seedling. Has been growing well under the spider farmer SF-1000 led light. Only nutrition till tomorrow has been blue planet liquid seaweed. Will be introducing base nutrition in very light amounts. Thanks again for all the likes, follows, and subscriptions on my YouTube channel. I greatly appreciate the support, and am happy to invite new subscribers to follow my adventures, and tips there. Happy growing everyone, and be safe out there 🍻 To purchase light click link below US：https://amzn.to/396hXXb CA：https://amzn.to/3ol4oK4 DE：https://amzn.to/3q15SJT UK：https://amzn.to/2L7NVKN AU：https://amzn.to/3pZD6ZQ FR：https://amzn.to/2Xkomsi IT：https://amzn.to/3nk7A7h ES：https://amzn.to/2XhtGwB

first person in the world to get it 3 weeks before pre release, grew it, now I've got the first harvest in the world after pre release :) Smoke report / Time 21:17 / 4th April Strain - strawberry lemonade Lineage - unknown strawberry X lemon OG Genotype - sativa Dom Smell uncracked open - strawberry, light citrus smell, lemon water smell Smell cracked open - hashy, strawberry, more noticeable lemon Bud structure - overall nice, decent amount of trichs, 90% bud to 10% leaf ratio Papers used for joint - Element rolling papers (standard packet, not the new hemp slow burn) Filter - Element perforated trips Lighter - Zippo Joint weight - approximately 1.7-1.8g Any extras in the joint or bong (extracts, mixture's etc) - there is 0.2 or 0.3 of strawberry lemonade scissor hash, 0.2 of strawberry lemonade keif and 0.3 of strawberry lemonade trim dry sift hash. So there's a lot in this joint. First hit, hashy.... Extremely hashy As I keep smoking, somewhat less hash taste, more sweet flavour.... Report back in a while..... It's now 21:25 , it's quite a light high, halfway through the joint as I am a light smoker considering I've been on a 6 month tolerance break Next day : ended up walking up over 12 hours later, all I remember is the joint towards the end was far to resinous to smoke at some point, the high got intense after smoking another joint if a different strain then fell asleep

Athena nutes rocking and rolling in this DWC

All and all good, lots more growth. Flip the switch soon and see how much more they stretch in flower. Definitely has monster genes. Some fan leaves are bigger than a hand span. Watering sensitive but makes a quick recovery of over/under watered. Not long left now, happy growing peeps 💚🌿🌱

Week 13 : Six Shooter So i've been looking into these plants' trichomes daily, sometimes twice daily, they're all really really cloudy, like full white, completely curled in. Some have a slight beige tint to them, so i'm guessing that's the first few ambers ! That means it's time for the chop ! these wrapped up their second week of flush with three x additive flush. To flush you water until run off then add 20% which is just about 4 pints for me. Now i'm at the end of the grow i can say that the full tent is a good idea, but it does get crowded and that will surely affect my yield as there are a fair few colas that are totally f-ed in the sense they are thin, skinny, a tiny bit of flower with just a few pistills... so those are useless and they're going into my bubble hash project, so let's see, maybe i can extract value out of the trim , the popcorn buds, and the rest of the plant ! Wish me luck and drop me a message, i'm chopping these down real soon ! 🚀

Buds have shown decent growth and are stacking nicely. I believe they have a calcium magnesium deficiency from the rust spots and purple hues on fan leaf stems. I am a frugal grower and have been researching ways on making my own cal mag but not sure how much of an effect it will have with just a few weeks to go. I'm also thinking the lighter colored leaves could be from light stress because it shows where the light is most concentrated, at the center. I've had the light at about 18" above the lower part of the canopy. But have since raised it a few inches.

This girl is definitely budding- but not in a structure I’m used too. I’ve done a few rounds of defoliation on her, but she’s just very leafy and will definitely be the lowest yielder in the tent.

2nd net is up. Early bud formations are promising. holding up to the extremes pretty well, some leaves taking minor damage, but overall, she is holding up, gave her 1 night at 50F see how she would react, stressful. Not advised as it messes with her metabolism, but I want to see if it triggers any anthocyanin response. Love to see her purp up but no signs yet. My homework. Rubisco regeneration is intrinsically linked to nitrogen supply because Rubisco is a major sink for nitrogen in plants, typically accounting for 15% to over 25% of total leaf nitrogen. The regeneration phase itself consumes nitrogen through the synthesis of the Rubisco enzyme and associated proteins (like Rubisco activase), and overall nitrogen status heavily influences the efficiency of RuBP regeneration.Structural Component: Nitrogen is an essential building block for all proteins, and the sheer abundance of the Rubisco protein makes it the single largest storage of nitrogen in the leaf. Synthesis and Activity: Adequate nitrogen supply is crucial for the synthesis and maintenance of sufficient Rubisco enzyme and Rubisco activase (Rca), the regulatory protein responsible for maintaining Rubisco's active state. Nitrogen deficiency leads to a decrease in the content and activity of both Rubisco and Rca, which in turn limits the maximum carboxylation rate, Vmax, and the rate of RuBP regeneration Jmax, thus reducing overall photosynthetic capacity. Nitrogen Storage and Remobilization: Rubisco can act as a temporary nitrogen storage protein, which is degraded to remobilize nitrogen to other growing parts of the plant, especially under conditions of nitrogen deficiency or senescence. Nitrogen Use Efficiency (NUE): The allocation of nitrogen to Rubisco is a key determinant of a plant's photosynthetic nitrogen use efficiency (PNUE). In high-nitrogen conditions, plants may accumulate a surplus of Rubisco, which may not be fully activated, leading to a lower PNUE. Optimizing the amount and activity of Rubisco relative to nitrogen availability is a target for improving crop NUE. Photorespiration and Nitrogen Metabolism: Nitrogen metabolism is also linked to the photorespiration pathway (which competes with carboxylation at the Rubisco active site), particularly in the reassimilation of ammonia released during the process. To increase RuBisCO regeneration, which refers to the process of forming the CO2 acceptor molecule Ribulose-1,5-bisphosphate (RuBP) during photosynthesis, the primary methods involve optimizing the levels and activity of Rubisco activase (Rca) and enhancing the performance of other Calvin-Benson-Bassham (CBB) cycle enzymes. Biochemical and Environmental Approaches: Optimize Rubisco Activase (Rca) activity: Rca is a crucial chaperone protein that removes inhibitory sugar phosphates, such as CA1P (2-carboxy-D-arabinitol 1-phosphate), from the Rubisco active site, thus maintaining its catalytic competence. •Ensure optimal light conditions: Rca is light-activated via the chloroplast's redox status. Adequate light intensity ensures Rca can effectively maintain Rubisco in its active, carbamylated state. •Maintain optimal temperature: Rca is highly temperature-sensitive and can become unstable at moderately high temperatures (e.g., above 35°C/95F° in many C3 plants), which decreases its ability to activate Rubisco. Maintaining temperatures within the optimal range for a specific plant species is important. •Optimize Mg2+ concentration: Mg2+ is a key cofactor for both Rubisco carbamylation and Rca activity. In the light, Mg2+ concentration in the chloroplast stroma increases, promoting activation. •Manage ATP/ADP ratio: Rca activity depends on ATP hydrolysis and is inhibited by ADP. Conditions that maintain a high ATP/ADP ratio in the chloroplast stroma favor Rca activity. Enhance Calvin-Benson-Bassham (CBB) cycle enzyme activity: The overall rate of RuBP regeneration can be limited by other enzymes in the cycle. •Increase SBPase activity: Sedoheptulose-1,7-bisphosphatase (SBPase) is a key regulatory enzyme in the regeneration pathway, and increasing its activity can enhance RuBP regeneration and overall photosynthesis. •Optimize other enzymes: Overexpression of other CBB cycle enzymes such as fructose-1,6-bisphosphate aldolase (FBA) and triose phosphate isomerase (TPI) can also help to balance the metabolic flux and improve RuBP regeneration capacity. Magnesium ions, Mg2+, are specifically required for Rubisco activation because the cation plays a critical structural and chemical role in forming the active site: A specific lysine residue in the active site must be carbamylated by a CO2 molecule to activate the enzyme. The resulting negatively charged carbamyl group then facilitates the binding of the positively charged Mg2+ion. While other divalent metal ions like Mn2+ can bind to Rubisco, they alter the enzyme's substrate specificity and lead to dramatically lower activity or a higher rate of the non-productive oxygenation reaction compared to Mg2+, making them biologically unfavorable in the context of efficient carbon fixation. The concentration of Mg2+ in the chloroplast stroma naturally increases in the light due to ion potential balancing during ATP synthesis, providing a physiological mechanism to ensure the enzyme is activated when photosynthesis is possible. At the center of the porphyrin ring, nestled within its nitrogen atoms, is a Magnesium ion (Mg2+). This magnesium ion is crucial for the function of chlorophyll, and without it, the pigment cannot effectively capture and transfer light energy. Mg acts as a cofactor: Mg2+ binds to Rubisco after an activator CO2 molecule, forming a catalytically competent complex (Enzyme-CO2-Mg2+). High light + CO2) increases demand: Under high light (60 DLI is a very high intensity, potentially saturating) and high CO2, the plant's capacity for photosynthesis is high, and thus the demand for activated Rubisco and the necessary Mg2+ cofactor increases. Mg deficiency becomes limiting: If Mg2+ is deficient under these conditions, the higher levels of Rubisco and Rubisco activase produced cannot be fully activated, leading to lower photosynthetic rates and potential photo-oxidative damage. Optimal range: Studies show that adequate Mg2+ application can enhance Rubisco activation and stabilize net photosynthetic rates under stress conditions, but the required concentration is specific to the experimental setup. Monitoring is key: The most effective approach in a controlled environment is to monitor the plant's physiological responses e.g., leaf Mg2+ concentration, photosynthetic rate, Rubisco activation state, and adjust the nutrient solution/fertilizer to maintain adequate levels, rather than supplementing a fixed "extra" amount. In practice, this means ensuring that Mg2+ is not a limiting factor in the plant's standard nutrient solution when pushing the limits with high light and CO2. Applying Mg2+ through foliar spray is beneficial to Rubisco regeneration, particularly in alleviating the negative effects of magnesium (Mg) deficiency and high-temperature stress (HTS). While Mg can be leached from soil, within the plant it is considered a mobile nutrient, particularly in the phloem. Foliar-applied Mg is quickly absorbed by the leaves and can be translocate to other plant parts, including new growth and sink organs. Foliar application of: NATURES VERY OWN MgSO4 @ 15.0g L-1 in a spray bottle. Foliar sprays are often recommended as a rapid rescue measure for existing deficiencies or as a supplement during critical growth stages, when demand for Mg is high. Application in the early morning or late evening can improve absorption and prevent leaf burn. The starting point [of creativity] is curiosity: pondering why the default exists in the first place. We’re driven to question defaults when we experience vuja de, the opposite of déjà vu. Déjà vu occurs when we encounter something new, but it feels as if we’ve seen it before. Vuja de is the reverse—we face something familiar, but we see it with a fresh perspective that enables us to gain new insights into old problems. Come walk in the enchanted forest.

Como podemos ver ya todas están para el corte o casi, en algunas tendré que seleccionar el pheno, ya que hay alguna que me gusto más que la otra, en general un terpeno muy diferente en cada variedad y también la calidad de la resina, en general mucha resina, pero por ejemplo he podido observas que los tricomas de la Gorilla Melon son más grandes y se oxidan de una manera más lenta, ideal para hacer extracciones, en cambio, la Reinbow Melon .... ese terpeno dulce intenso tanto que es hasta abrumador...me muero de ganas ya de probarla... la Lemon Mandarín es exagerado el olor que tiene a mandarina si cierras los ojos y ueles fuere parece que te vayas a comer una buena mandarina y la Paya Sherbet tiene un olor dulce y muy agradable, pero nada que aún pueda relacionad del todo..... un saludo y buenos humos fam.

It was such a nice experience for me with this strain, first time ever growing her, she had a little bit of long internodes and thought she wasn't gonna be very productive, however the nuggets are so so hard and compact and the quality is just brutal, doesn't even look like she's s been outdoor grown, I love this strain for the rare strong smell like very sweet and floral with that strange diesel notes mix the sweet tones, I would love be growing her my whole life, I definitely will keep growing this lady FOR SURE!. thank you so much and hope you guys enjoy! 💎🙏🔝💚

Last day chopped approx 1.8 kg tpw

The girls are looking happy. 4/4 germinated and are all doing fine so far. Very excited for this run as the Falcon 9 x Peach Ozz cross sounds very tasty to me. Also interested to see how similar the four different plant will be.