This girl is currently in the darkness to speed up the process a bit. She's been flowering for over 63days already and white pistils dont seem to stop coming out. I think this is before of her strong sativa strain. Anyway, next week will be about her being harvested. I hope to get at least 8oz out of this girl. Let's see if i can do it.

Пришло время сбора урожая. на днях все оставшееся уберу :)

Letting them dry out before harvest in a few days. Most of the trichomes are getting cloudy.

First time and the seed has been sitting awhile but great tap root results !

New week of flowering for CBD SPLIFF BERRY Doing nicely @spliffseeds deliver again a great strain 👌🏻 did Les LST to this one compare to Afghani Gold but made sure the lower stuff gone also make sure less popcorn can pop up. I am not sure if ever smoke a 50/50 THC/CBD strain but will see 👀 Happy growings Growmies see you next week visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter

Aug 15 is a month since popped Trying mainline

Well folks we chopped the Last of the Strawberry Blast 😁 The Strawberry Banana 🍌 Strawberry Blast Series 🍓 🍓 🍓 🍓 was a real blast , ive now done 5 Strawberry Cultivars and I'm extremely happy with all the results 😀 Killer Stuff 😀 I want to thank all my growmies for stopping in and showing your support 🙏 it's been much appreciated 🙏 Well my friends that's it for me for awhile😌 So until next time my friends 👉 Happy Growing and of course 🙂 Happy Smoking ........ Later Growmies 👊👊 be well 👌 FC4800 from MarsHydro Lights being readjusted and chart updated .........I've added a RU45 to the mix www.marshydro.ca 👉I am using Agrogardens for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.agrogardens.com 👈 Agrogardens Cal MAG Agrogardens Grow A B Agrogardens Bloom A B Agrogardens Bud Booster Agrogardens PK13/14 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈 Would you like to hang with the growdiary community 👉 https://discord.gg/gr4cHGDpdb 👈

-

We start this report almost with finished vegetation period The 13 seeds Og Kiss It was a gift from a friend I thought it will be an auto, but in 4 weeks I understood its fem I think this can be one of the best trees* that I have seen I mean in indica, because I had bigger sativa plant than this one Enjoy people this is one of the best plants that I have seen Super strong and heavy

Day 14 - She's thriving it seems so far. She's bursting with tri-leafed nodes. I've changed the environment a bit. I have not been successful cooling the room enough to bring down the VPD from 1.3kPa or so. Instead I'm approaching it from a humidity perspective. I have the threshold up to 70%RH. I'm peaking the humidity to lower the VPD to .9kPa since I can't really effectively cool the tent to the low 70's. There is a slight aroma from the seedling. The infamous skunky smell is only observable when very close to the plant. I have not been using the filter on the exhaust fan though.

Buds stretching out nicely. Guzzling water like crazy.

Week 10 (3-4 to 9-4) 3-4 Temperature: 22.5 degrees (lights on) 19.3 degrees (lights off) Humidity: 64% (highest) 59% (lowest) 4-4 Temperature: 22.5 degrees (lights on) 19.5 degrees (lights off) Humidity: 66% (highest) 59% (lowest) 5-4 Temperature: 23.4 degrees (lights on) 20.1 degrees (lights off) Humidity: 64% (highest) 56% (lowest) No pictures. 6-4 Temperature: 24.4 degrees (lights on) 20.7 degrees (lights off) Humidity: 64% (highest) 55% (lowest) It looks like the plants are doing better since they havent got any water the past couple of days. Today i decided to heavily defoliate the plants. I also found a old feeding schedule from Green House with PH values, and it recommends that i should give an PH of 5.7 on coco. I thought PH 6 was good, but i was wrong, maybe this in combination with the plants being too wet, is the reason for the weird growing leaves, and the problems they show. I cleaned the reservoir and made sure there is no old water in the lines. I made a full strength 10L feed, and added it to the reservoir. I turned the reservoir on for around 3 mins, just to the point that the AutoPot trays are full of water and the valves are shutting them off, then i turn the reservoir off. I will do this every other day, so 1 time in 2 days. 7-4 Temperature: 25.7 degrees (lights on) 22.1 degrees (lights off) Humidity: 64% (highest) 50% (lowest) 8-4 Temperature: 26.4 degrees (lights on) 22.4 degrees (lights off) Humidity: 64% (highest) 55% (lowest) Today i turned on the reservoir for 3 minutes again, just till the trays are full of water. 9-4 Temperature: 25.9 degrees (lights on) 21.2 degrees (lights off) Humidity: 60% (highest) 51% (lowest) No pictures.

I have been super excited with everything up to this point . I have made all my preparations that I think need to be made and did some trial runs on my environment. I starting preparing around the 15th of January and my set up was complete around the 19th of February. I spaced my purchases out based on budget constraints. I wanted a cheap and efficient grow area. Some thing I paid more for because through all the research I did I felt quality was more important. If you are as excited as I was, you get pretty anxious when awaiting order status when you first order your seeds. You should remember you are ordering from an online seed bank not amazon. Most work Monday - Friday and are in a complete different time zone. I ordered my seeds from seed supreme Seedbank. I placed my order on 31 January and mailed money as directed. This was the scariest part for me especially when I didn’t hear anything back. I finally received a email on the 12th if February saying my invoice was paid and then subsequently mailed out on the 15th and I received on the 20th. One thing I would like to note that recommend to anyone mail cash is to make sure you spend the extra cash and track your payment. I’m currently germinating all five GSC I received I placed them in water for the first 24 hours and then a paper towel for approximately 40 Hours. I’ll add links to most of the items I purchased below. Some items I purchased through offer up and let it go app to save money. VIVOSUN 48" X48" X 80" Hydroponic... https://www.amazon.com/dp/B07GNBCVPZ?ref=ppx_pop_mob_ap_share LED Grow Light 1000W Full... https://www.amazon.com/dp/B074MBP32M?ref=ppx_pop_mob_ap_share AcuRite 00613 Humidity Monitor... https://www.amazon.com/dp/B0013BKDO8?ref=ppx_pop_mob_ap_share Hydrofarm Grow!T Premium Coco... https://www.amazon.com/dp/B01DA4PZI4?ref=ppx_pop_mob_ap_share iPower LGTESTSOIL 3 in 1 Soil... https://www.amazon.com/dp/B075LRY5M7?ref=ppx_pop_mob_ap_share Unco Industries (WWSB15LB) Wiggle... https://www.amazon.com/dp/B00062KQ42?ref=ppx_pop_mob_ap_share General Hydroponics pH Control Kit https://www.amazon.com/dp/B000BNKWZY?ref=ppx_pop_mob_ap_share VIVOSUN Air Filtration Kit: 4... https://www.amazon.com/dp/B06XFRNPR8?ref=ppx_pop_mob_ap_share VIVOSUN pH & TDS Meter Combo, 0.05ph High Accuracy Pen Type pH Meter & +/- 2% Readout Accuracy 3-in-1 TDS EC Temperature Meter https://www.amazon.com/dp/B06XKMH86J/ref=cm_sw_r_cp_api_i_2xyCCbK4MKNN4 Botanicare CAL-MAG Plus Plant Supplement 2-0-0 Formula, 1 Quart https://www.amazon.com/dp/B004JKBMRW/ref=cm_sw_r_cp_api_i_LyyCCbY8SMFTK Century 24 Hour Plug-in Mechanical Timer Grounded https://www.amazon.com/dp/B00MVFF59S/ref=cm_sw_r_cp_api_i_ozyCCbHG8Q2PB Day 1 - 2/23/19: I planted my seeds today about a fingernail length down with tap root pointed and gave a light watering with plain tap water at a PH of 5.8. Day 2 - 2/24/19: Nothing new to report no activity on the surface, misted watering at 5.8 PH. Day 3 - 2/25/19: Plant number 1 which had the longest tap root broke the surface I started a time lapse on it to cover the first moments of birth 😭 daddy is already so proud lmao. I have another light watering today with my humidity domes on, the intent is to have the plants roots work to get the required water and hopefully promote root growth. I also added 1ml of Rapid start and diluted into 1 gal. Day 4 - 2/26/19: Checked the status this morning prior to work and two more have reached the surface only two more remaining which I suspect will reach by the time I make it home from work. Misted this morning pot was looking pretty dry with the exception of the humidity domes, which I removed on all the sprouted seedling. I intend on shifting to a 20 on 4 off cycle and starting my other fans. Day 5 - 2/27/19: All five plants have broke the surface. I did a normal watering this am still utilizing the dome to avoid watering on top of the plants. I lowered the light again some of the early sprouters we stretching a little more than I wanted and appeared leggy to me. Day 6 - 2/28/19: Nothing really to report today. Excited for the name reveal tomorrow. I did a light watering. I played around with my ppm meter and ec I definitely plan on using in conjunction with my first feeding this weekend. Day 7 - 3/1/19: Was watering this morning normal levels. I also mixed a new feed to be ready for them tomorrow. While I was watering # 5 fell over I accidentally tipped it with the spout. I grabbed some left over soul to help prop it up hopefully she is ok.

Moved the tents outta here 😂 switched some ventilation up and added two more dumps, I need to get more fans down here lol these girls look great all day every day, can't wait to see how it goes! They are all loving life, smaller clones have even had an awesome rebound the last few days since they got topped so that's cool. This week went great, started out stripping and topping everywhere I could and ended with beautiful roots going up to three fallon pots, gave a nice full watering to all of the and will see how they drydown tomorrow, I'm gonna guess they won't want water until the day after, I want them to really reach out into their new pots.

Hi guys So here is my 10 plant auto run from fastbuds 420 genetics. I will update weekly on this one. So I'm going to be using 3 gal fabric pots filled with biobizz lightmix soil. I will be putting into solo cups after the 18 hour soak then transferring them to there for ever pots. Im looking forward to this run and trying to get 20oz + dry and cured out of this 4x4 tent grow. Part 2 of germination in operation in solo cups with root juice. Hopefully 10 out of 10 pop.

26.05 Cleaned the Tank and changed the water. Beside that nothing special to say about that grow - everything is just beautiful and developing super well. 27.05 Removed some more Fanleaves to provide the lower buds with more light. It's the middle of the blooming stage, since they should be ready within 70-80 days and are actually in day 32 after the light schedule was changed.

Finally, she has come to a finish with the three ladies coming out to a total of 60.8G. I would say I'm slightly proud of this grow, if only it weren't for the hiccup I had during mid flower. The buds are a little airier than I like, however she smokes like a charm and I would definitely recommend this strain to anyone looking for a high CBD dominant strain. Thanks for all the support this run; seeing as it was my first attempt to hydro it is very much appreciated! Til' next time

Happy frog

todo va bien, cogollos dulces perfumados, nada más que añadir. buen cultivo a 🍁🍁🍁🍁👽🍁🍁🍁🍁