Likes
Comments
Share
@Roberts
Follow
Bruce Banner #3 fast is growing great under the Hortibloom Solux 350. Everything is looking really good. She is starting to bulk, and get a nice resin layer going. Not much else to report at the moment. Thank you Hortibloom, and Tge Orginal Sensibile Seeds Company. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Processing
Likes
7
Share
@gablmo
Follow
Finally flower. They are 4 feet now. What am I going to do? I don't want them to burn into the light.
Likes
22
Share
Likes
1
Share
Likes
16
Share
My grow light has started messing up. It turns off at random times and when I turn the dimmer knob a little it come back for a few days. This is not what I expected from a high-end priced item. Anyway, I contacted with MarsHydro and waiting for their response. Lowered the humidity level to 55% , although it is a tricky situation. This week I noticed that the leaves are tacoing, my bet is on bad air circulation and too much light. The humidity should be even lower, but I have to wait until she recovers. DLI 40
Likes
35
Share
She has returned with two 2 tops Lets hope she gives me sativa dreams ! 💤 😴 She is so strong 💪 and stable im impressed with Kannabia Genetics ! I LOVE YOU KANNABIA GENETICS! 😍😘 Check out my Cannabis Community, please👇like👇, follow, comment, and subscribe to my YouTube channel👇. ❄️🌱🍻 https://www.youtube.com/@DutchF4rmer Join our cannabis community community for weekly giveaways 👌 (Discord Server) https://discord.gg/VMu6rH4a7V It will be appreciated! ❤️ Happy Growing 🌱🌱🌱
Processing
Likes
5
Share
voy por el mes casi. y la mas alta pasa los 30 cm . las otras promedian los 24.5. cualquier sugerencia gracias
Likes
9
Share
Harvest day! This is my first autoflower ever and after 66 days this is what I got. Now it's hanging to dry for a dry trim. Definitely not the best, but feeling happy with the outcome. Even with some major feeding mistakes, I managed to finish her. Learned so much. I will update with the final weight and a strain review!
Likes
150
Share
Hi, everybody. Today my plants 55 days. They look very good, cheerful. I had a problem with the lamp today. I don't know what's wrong with her after the photo shoot, but she did not turn on even after it cooled down, had to be replaced by a spare, though it has a slightly different spectrum. 😟 I found that the smell was very strong, air filtration fails, the stench goes through a little passive blowing and smells of the whole apartment. When my greenhouse is closed the smell is, but not strong, but when I work in it, it is necessary to ventilate the room for a long time. And for me this dangerously. But, there is good news, the postman gave me a great fertilizer that will help me get a good and delicious harvest. 💪 Bubblelicious Auto - these plants show a very strong smell, for 4 days it has increased several times, the smell is very strong, but pleasant. The smell of skunk was felt better when you smell a flower, but everywhere smells very strong and sweet smell of Bubble. It is very very sweet, resembles sugar cane, very sweet candy. Nevilles Haze Auto-very active, the vegetation period is very long. This plant requires a lot of time and patience, but I think it will reward me with a large harvest, I hope so. This plant practically does not smell, but there is a typical smell of Haze. If you want to harvest quickly, this plant will not suit you, be patient, well, I will tolerate. In General, we will monitor their development. I hope everything will be fine, and my neighbors will not call the police, then I will have a lot of problems, but I'm not afraid of them, because the love of this plant is stronger. Freedom of the cannabis industry 👍
Likes
99
Share
@BudXs
Follow
Cuttings were stripped from their mothers 120+ Autos are healthy and doing their thing, albeit slowly 2 lights on, 2 more till Im happy. Looking forward to the next few weeks:) Everyone stay safe and grow big
Likes
43
Share
@Ju_Bps
Follow
Hello my friends, I think it's my last week fertilizer, Plant still healthy and love fertilizer ,😍😍, I'll start flush in 1 week, I think harvest in 2 or 3 week, Trychromes start to be full milky Have a good week, Thanks for like and following 🤗🤗🤗
Likes
16
Share
Let’s see , humidity is an issue . It’s higher than I’d like it to be . I added drip pans & two different miniature forms of dehumidifiers one electronic and the other passive . I need recommendations on affordable dehumidifiers before I run into mold issues . After breaking the apical dominance there was one or two issues but it gave me all the more admiration for the genetics to take a beating and still remain unbothered & WHOLE . A main top was bound too tightly & broke in half trying to pull itself back up . It remained broken and unnoticed for atleast 3 days before I saw the damage and taped it . She is now almost fully scarred over & healed . Vertical growth was decent this week I wouldn’t describe it as fast or explosive. Still watering to activate the dry amendments I can tell they haven’t began taking it up quite yet. Holy shit do they stink when not premixed into the soil before planting ! Just monitoring & trying to get as much dense continuous resin packed bud stacked up in there .
Likes
4
Share
Everything is looking good. Gave these girls a shot of recharge and fish shit. Prepping there new homes and getting ready to transplant.
Likes
19
Share
Week 3 Day 1 8/26/2023 Water Change Day!! Added: 36 gallons of Water TPS SILICA GOLD-.5mil/Gal Root Drip- 1mil/Gal CALMag- .5mil/Gal GH FLoraMicro-4.2mil/Gal GH FlroaGro-3.8mil/Gal GH FLroaBloom-3.0Mil/Gal ORCA-.5mil/Gal She continues to look Amazing and to be doing an amazing job! Week 3 Day 2 8/27/2023 Topped her a little and took a little from the bottom. The PH was just a little high so I added 4mil PH down to get it to 5.86. Week 3 Day 3 8/28/2023 Topped her a little and just enjoyed her beauty. Week 3 Day 4 8/29/2023 Topped her a little, and started cleaning up the lower 1/3, I am starting with the fan leaves that are touching the clay and some of the lower, lower portion but leaving the stems for when I take clones. Week 3 Day 5 8/30/2023 The temp has been getting to 79-80 the last few days and I don't like it that high. I lowered the light to 29 inches and decreased intensity to reach the 350ppfd for the plants. By dropping the light it should also drop the temperature. I took a few bottom leaves as I start my clean up, leaving the lower stems for clone material for now. Week 3 Day 6 8/31/2023 Found out why the temp had been getting so high in my tent and my grow room, the controller for my other light for my other tent was malfunctioning and overheating. I guess this was the unknown contributing factor to the sudden increase in temp, how am I sure about this, because the light no work no more. I am working with Spider-Farmer Warranty since the light was under a year old, very sad day yesterday was to replace my SE 7000 on my breeding plant which was in week 9 of flower with a VS2000 I am thinking I am going to have to cut my losses. On a good note she looks Amazing full on Growth Spurt happening, I adjusted the PH up slightly to get it from 5.81, to 5.89. Tomorrow Measurements incoming. Week 3 Day 7 9/1/2023 She is looking beautiful this morning! I took off some lower leaves cleaning up the bottom 1/3 but I left some of the Stems because I know I am taking clones in a few weeks. She has grown 5 inches over this last week.
Likes
85
Share
Likes
15
Share
It's HARVEST Day!!!! Added another week of flower to give her time to dry and be able to give some accurate weight numbers. She was a real pleasure to grow, really excited to smoke this one. I'll be back in a couple weeks to give a smoke report post dry/pre cure. Happy holidays growmies!!
Likes
10
Share
Not a great week lost one due to being away for 4 days total dehydration think missed her when watering before I left 3 looked bad but saved 2 of the 3 lesson learned ☹️
Likes
13
Share
@einamio
Follow
Day 36 I guess I can call it bloom. Nice strong pistils shooting all over. She is the tallest so far making me raise my lights a little more. Day 38 Now Californian Snow is the tallest :) Ztrawberry stopped at a perfect height, it looks like she's gonna develop into a beautiful lady. Fat white pistils all over 😻 Day 39 Happy girl got 2500ml cm bg bb bh 6.3ph ~1EC She is perfect, symmetrical, stopped stretching at about 50cm, flowers are mostly leveled, branches are strong, leaves point up unless I water. I think she's also turning purple. Beaut 😻 Day 42 I think I saw some burnt tips but she still looks super happy and healthy. The most vigorous plant I've had.
Processing
Likes
12
Share
4/20: I have 3 good clones of the shortie growing, and another FFT6 seedling. 5/1: The seedling is now in a 5 gallon pot outdoors, and 2 of the clones are in my closet getting ready to be transplanted into 5 gallon pots and moved outdoors. One of the FFT6 clones will be grown in my tiny tent. 5/6: I took the last two clones outdoors and fed them really well. I also did some training on the seedling and the clone in my tiny tent. 5/7: I did a foliar application of Axiom Harpin proteins today. 5/9-5/11: Did foliar feeding and lots of training every day. 5/12 - 5/17: Fed the outdoor girls on the 13th, then we had lots of rain all week. The seedling is a beast. Installed a new 200w 3000k waterproof LED over the outdoor plants. The indoor clone looks great. I gave her some water on the 16th. 5/18 - 5/19: The seedling and two clones outdoors are all flowering?!?! I suppose it's because I germ'd and vegged them for a month under 24/0 before taking them outdoors under 14/10 of daylight... I'm really hoping she sees the days getting longer and goes back to vegging. I need time to bush her up really well! I ordered another 200w 3000k waterproof LED to replace the two cool white 60w LED's, so that will be 550w total watts of lighting outdoors in addition to the 5'ish hours of direct sunlight they get at mid-day, and the tree-diffused sunlight they get for the rest of the day. Thinking about trying a product called Bud Bomb...has lots of hormones, cytokinins, and auxins that when applied at the beginning of flowering supposedly causes more lateral branching and less vertical stretch. As it is, I'm spending too much time training her and the other outdoor plants to stay below the eyeline of nosy neighbors, so I'm really considering giving it a shot... 5/20: I went for it and sprayed them with Bud Bomb this morning...hope it works like they claim.. 5/21 - 7/4: The clone i grew in the tiny tent got to move in under the quantum boards for her last 2 weeks and fattened up nicely. I harvested her on 6/28 and washed her buds, then jarred and weighed her on 7/3. She produced 110g of cola and 51g of lower bud...very little of it was larfy.👍 After a few great weeks flowering outdoors, i was invaded by spider mites and grasshoppers. The #6 seed-grown plant didn't make it, but i brought the #6 clone indoors and treated her for spider mites a few times, along with the 2 x #1 clones and the #7 plant. That outdoor clone now in my closet is still flowering as of 7/4, but had her last dose of nutes on 7/3. Flushing in a few days.