We have made it to the end of Week 6. Conditions in the tent have improved DRAMATICALLY. The heat wave has finally passed and the temperature has finally leveled out. Not only that, the super weird monsoon weather that we were having has also passed and now the humidity is not rising above 60%. This turn for the best is really showing and also fixing the pH problem I had also probably helped a lot. Going to push the PPM a little more this week, between 750-850 The color of the buds is really coming through now, especially in the pineapple express and zkittles. The melonsicle seems to be growing much more like a traditional sativa. I feel it's about a week behind schedule with the rest of the plants. It seems to be on a true 9 or 10 week tract at this point. I think the blue gelato is going to be a bust in terms of yield. It just got heavily over shadowed by the other three plants from the beginning. It has stayed quite small and I am not sure it will yield heavily. Hopefully the smoke is quality and I will be impressed enough with my first Barney's Farm experience to try again.

Never used it . Bug on site.

Dia 20 (05/02) Han pasado 8 días desde el ultimo riego. El sustrato de PRO-MIX HP se encuentra esponjoso al tacto a pesar de que está seca la parte superior Riego 1 Litro H20 + Wholly Base 1,25 ml/l + Solid Green 0,5 ml/l + Rise Up 1 ml/l de Gen1:11 - pH 6,23 TDS 660 PPMs Día 22 (07/02) Vamos a probar a hacer este ciclo con LST Día 23 (08/02) A +24 horas la planta ha reaccionado muy bien al LST. Se han estirado las ramas inferiores y la rama apical se sigue estirando Día 25 (10/02) Sigo con ajustes de LST para abrir la canopia. La planta está reaccionando con mucho vigor 😍💥 Este día añado a la carpa el sistema TrolMaster TCS-1 Tent-X Día 26 (11/02). Riego 1 Litro H20 + Wholly Base 1,5 ml/l + Solid Green 0,75 ml/l + Rise Up 1,25 ml/l de Gen1:11 TDS 780 PPMs - pH 6,36 (mínimo ajuste con pH+ para subirlo desde 6,2) La planta avanza vigorosa. En una semana pasamos a 12/12 😁 Nutrients by Gen1:11 - www.genoneeleven.com Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae Controlled by TrolMaster TCS-1 Tent-X System Main Controller - https://www.trolmaster.com/Products/Details/TCS-1

This week beacause of the difficulty in controling the water temperatures and tent humidity we had early signs of pythium in the auto flower. So i treated it with one hour of 8ml per liter of H2O2 and changed the reservoir for new nutes and 0.5ml/L of H2O2, instead of great white. Besides that, everything's ok and the other 2 plants are starting to root. If the others start to show signs of root rot as well, ill change the whole grow from great white to H2O2. The Apple&Bazookiez showed signs from the beginning of a mutation. Have one strange looking leaf and 3/4 branch of shoots on the top, without any damaging, fimming or topping. Good week, good grows

All good

Buds buds and more buds!

Title: 100% ChatGPT-Guided Grow – 12/12 Fast Flower Test (With Supervision) Hey growers! This grow is an experiment: I'm letting ChatGPT guide my entire grow cycle, from lighting to nutrients to environmental tweaks. It’s all based on AI suggestions. Of course, I’ll still be keeping a close eye on things — if I see something going wrong or the plants aren’t vibing with the plan, I’ll step in. But the idea is to test how far AI can take a grow under controlled conditions. Strains – All from @Sweet_Seeds (F1 Fast Version): Mental Rainbow F1 Fast Version Tropicanna Poison F1 Fast Version S.A.D. Sweet Afgani Delicious F1 Fast Version Gorilla Girl F1 Fast Version Setup: Coco in 20L @MarsHydroLED SmartPots Grow tent: @SecretJardin DR240W Lighting: 2x 720W LM301H EVO LEDs 12/12 from seed Germination: May 14th / Main grow starts May 20th Nutrients: Hy-Pro Coco A/B CalMag Pro, @BAC Silica Power, F1 Extreme Booster Irrigation: Week 1 hand watering, then Blumat pH starts at 5.8 CO₂ supplementation via natural gas system (Spider Farmer GGS) Goal: Complete a full grow cycle in 10 weeks or less, from seed to harvest. Updates will be posted in a personal yet informative style — a hybrid of stoner chill and data-driven grow logs. Let’s see what AI can do in the grow tent. Stay tuned! 🤖🌿 🌱 Weeks 1–3 (May 20 – June 9) – Seedling to Early Flower (Stretch Phase) Goals: Strong root development, firm stem structure, controlled stretch Light: 12/12, start at ~500 PPFD → ramp up to 800 PPFD (day 14–21) CO₂: 1500 ppm (only active when lights are on and temps 26°C) Temperature: 26–28°C day / 22–24°C night RH: Start at 70% → gradually lower to 60% Nutrients (EC ramp-up): Start EC: 1.0 → increase to 1.4 Plagron Cocos A+B + CalMag Pro (0.2 EC tap water) Always mix Silica Power first (0.1 ml/L) Actions: Week 2: Start light defoliation on lower leaves Week 3: Begin LST if desired pH: 5.8 throughout the veg phase 🌸 Weeks 4–5 (June 10 – June 23) – Flowering Phase 2 (Bud Set) Goals: Initiate flower formation, maintain healthy leaf mass, stimulate bloom EC: 1.5–1.7 (monitor Blumat watering rate carefully) RH: 55–60% Nutrients: Plagron Cocos A+B CalMag Pro Silica Power (0.1 ml/L – only until end of week 5) Start B.A.C. F1 Extreme Booster at half dose, watered manually twice a week Light: 900–1000 PPFD if plants can handle it 🌼 Weeks 6–7 (June 24 – July 7) – Flowering Phase 3 (Bud Building) Goals: Develop dense flower structure, maximize flowering potential EC: Up to 1.8 max RH: 45–50% Nutrients: @Plagron Cocos A+B + CalMag Pro @BAC. F1 Extreme Booster at full strength Actions: Final defoliation at beginning of week 6 Inspect leaves regularly for airflow and mold prevention 💧 Weeks 8–9 (July 8 – July 21) – Ripening Phase Goals: Maximize terpenes, trichome maturity, flush medium Week 8: EC: taper down to 1.4 Stop using booster Optional single flush with enzymes (manual watering) Week 9: Only plain tap water through Blumat (~0.2 EC) Temperature: 24–26°C Dim lights to ~600 PPFD for final 3–4 days ✂️ Week 10 (July 22 – July 28) – Harvest Trichome check: Aim for 10–20% amber with a loupe Optional: 48 hours darkness before harvest Temperature: Keep low (20–22°C) to preserve terpenes Deadline: Harvest no later than July 28 Powered by the new 2025 @SpiderFarmerLED GGS system.. Detailed setup (only SF parts mentioned here): SF GGS Grow Light Controller (1x) SF GGS AC10 Kit (1x) SF GGS 6 Inch Clip Fans (2x) SF GGS 6 Inch Inline Duct Fan (1x) SF GGS SensorPro Kit SF Ultrasonic Humidifier May 20 – CO₂ moved outside, lighting dilemma, and a warm future ahead Moved the CO₂ generator outside the tent today. Immediate win: steady 700 PPM from just the pilot light, no active burn needed. When turned off, it drops neatly to 400 PPM, matching the calibration point. Double-checked with the Dimlux CO₂ sensor—readings line up perfectly. Still no tracking info for the originally ordered lights, so out of impatience I grabbed two new 720W LM281B fixtures from Germany this afternoon. Should arrive Friday/Saturday. It's a Trade Assurance order, so in theory, I'm covered. Now the question: let the seedlings coast at 259 µmol for two more days, or hang the old lights to boost them to 500 µmol? Eight out of twelve are already above soil, and honestly, I’d rather not mess with the current vibe. Leaning toward leaving them be—low stress, happy sprouts. Best part: temps dropped to 27.9˚C inside the tent now that the CO₂ generator’s out. Room itself is 24˚C, so all in all pretty chill. Curious what’ll happen once those dual 720W monsters fire up… it’s gonna get toasty, no doubt. 24/05: Stocked up on new Plagron nutes—finally. Now I can lock back into the full 10-week feeding plan (Plagron Cocos + B.A.C.). Flushing the res tonight and going full reset. Mixing fresh soup right after, dialed in to match this schedule: Week 1: Plagron Cocos A/B: 2 ml/L B.A.C. Silica Power: 0.2 ml/L Plagron CalMag Pro: 0.5 ml/L B.A.C. F1 Extreme Booster: 0 ml/L EC: 0.9–1.0 pH: 5.8 PPFD: 500 DLI: 22 RH Day: 70% RH Night: 65% CO₂: 700 ppm

02/05/25 Short facts: - 53cm high - Light is @80% but in a distance of 48cm - 650 ppfd - VPD @ 1.0 - but haven't got it higher than 0.9 --------------------------------------------------------------------------------- Not much to report. She is still stretching and has grown a lot in the last seven days, but she is still quite compact.

the last day of light. Two days of darkness and scythe. 10 days only water

2nd net is up. Early bud formations are promising. holding up to the extremes pretty well, some leaves taking minor damage, but overall, she is holding up, gave her 1 night at 50F see how she would react, stressful. Not advised as it messes with her metabolism, but I want to see if it triggers any anthocyanin response. Love to see her purp up but no signs yet. Homework. If Rubisco activity is impaired and it cannot properly function or regenerate its substrate, the plant's leaves are likely to turn a pale green or lime green, a condition known as chlorosis. Essentially, Rubisco activity is highly regulated and susceptible to various environmental and metabolic factors that can cause it to become inhibited, leading to an apparent failure in RuBP regeneration due to a lack of consumption. Rubisco regeneration is intrinsically linked to nitrogen supply because Rubisco is a major sink for nitrogen in plants, typically accounting for 15% to over 25% of total leaf nitrogen. The regeneration phase itself consumes nitrogen through the synthesis of the Rubisco enzyme and associated proteins (like Rubisco activase), and overall nitrogen status heavily influences the efficiency of RuBP regeneration. RuBisCO is a very large enzyme that constitutes a significant proportion (up to 50%) of leaf soluble protein and requires large investments in nitrogen. Insufficient nitrogen supply limits the plant's ability to produce adequate amounts of RuBisCO, thereby limiting the overall capacity for photosynthesis and carbon fixation. Maintaining the optimal, slightly alkaline pH is crucial for the proper function and regeneration of Rubisco. Deviations in either direction (too high or too low) disrupt the enzyme's structure, activation state, and interaction with its substrates, leading to decreased activity and impaired RuBP regeneration. (LIME GREEN CHLOROSIS) Structural Component: Nitrogen is an essential building block for all proteins, and the sheer abundance of the Rubisco protein makes it the single largest storage of nitrogen in the leaf. Synthesis and Activity: Adequate nitrogen supply is crucial for the synthesis and maintenance of sufficient Rubisco enzyme and Rubisco activase (Rca), the regulatory protein responsible for maintaining Rubisco's active state. Nitrogen deficiency leads to a decrease in the content and activity of both Rubisco and Rca, which in turn limits the maximum carboxylation rate, Vmax, and the rate of RuBP regeneration Jmax, thus reducing overall photosynthetic capacity. Nitrogen Storage and Remobilization: Rubisco can act as a temporary nitrogen storage protein, which is degraded to remobilize nitrogen to other growing parts of the plant, especially under conditions of nitrogen deficiency or senescence. Nitrogen Use Efficiency (NUE): The allocation of nitrogen to Rubisco is a key determinant of a plant's photosynthetic nitrogen use efficiency (PNUE). In high-nitrogen conditions, plants may accumulate a surplus of Rubisco, which may not be fully activated, leading to a lower PNUE. Optimizing the amount and activity of Rubisco relative to nitrogen availability is a target for improving crop NUE. Photorespiration and Nitrogen Metabolism: Nitrogen metabolism is also linked to the photorespiration pathway (which competes with carboxylation at the Rubisco active site), particularly in the reassimilation of ammonia released during the process. To increase RuBisCO regeneration, which refers to the process of forming the CO2 acceptor molecule Ribulose-1,5-bisphosphate (RuBP) during photosynthesis, the primary methods involve optimizing the levels and activity of Rubisco activase (Rca) and enhancing the performance of other Calvin-Benson-Bassham (CBB) cycle enzymes. Biochemical and Environmental Approaches: Optimize Rubisco Activase (Rca) activity: Rca is a crucial chaperone protein that removes inhibitory sugar phosphates, such as CA1P (2-carboxy-D-arabinitol 1-phosphate), from the Rubisco active site, thus maintaining its catalytic competence. •Ensure optimal light conditions: Rca is light-activated via the chloroplast's redox status. Adequate light intensity ensures Rca can effectively maintain Rubisco in its active, carbamylated state. •Maintain optimal temperature: Rca is highly temperature-sensitive and can become unstable at moderately high temperatures (e.g., above 35°C/95F° in many C3 plants), which decreases its ability to activate Rubisco. Maintaining temperatures within the optimal range for a specific plant species is important. •Optimize Mg2+ concentration: Mg2+ is a key cofactor for both Rubisco carbamylation and Rca activity. In the light, Mg2+ concentration in the chloroplast stroma increases, promoting activation. •Manage ATP/ADP ratio: Rca activity depends on ATP hydrolysis and is inhibited by ADP. Conditions that maintain a high ATP/ADP ratio in the chloroplast stroma favor Rca activity. Enhance Calvin-Benson-Bassham (CBB) cycle enzyme activity: The overall rate of RuBP regeneration can be limited by other enzymes in the cycle. •Increase SBPase activity: Sedoheptulose-1,7-bisphosphatase (SBPase) is a key regulatory enzyme in the regeneration pathway, and increasing its activity can enhance RuBP regeneration and overall photosynthesis. •Optimize other enzymes: Overexpression of other CBB cycle enzymes such as fructose-1,6-bisphosphate aldolase (FBA) and triose phosphate isomerase (TPI) can also help to balance the metabolic flux and improve RuBP regeneration capacity. Magnesium ions, Mg2+, are specifically required for Rubisco activation because the cation plays a critical structural and chemical role in forming the active site: A specific lysine residue in the active site must be carbamylated by a CO2 molecule to activate the enzyme. The resulting negatively charged carbamyl group then facilitates the binding of the positively charged Mg2+ion. While other divalent metal ions like Mn2+ can bind to Rubisco, they alter the enzyme's substrate specificity and lead to dramatically lower activity or a higher rate of the non-productive oxygenation reaction compared to Mg2+, making them biologically unfavorable in the context of efficient carbon fixation. The concentration of Mg2+ in the chloroplast stroma naturally increases in the light due to ion potential balancing during ATP synthesis, providing a physiological mechanism to ensure the enzyme is activated when photosynthesis is possible. At the center of the porphyrin ring, nestled within its nitrogen atoms, is a Magnesium ion (Mg2+). This magnesium ion is crucial for the function of chlorophyll, and without it, the pigment cannot effectively capture and transfer light energy. Mg acts as a cofactor: Mg2+ binds to Rubisco after an activator CO2 molecule, forming a catalytically competent complex (Enzyme-CO2-Mg2+). High light + CO2) increases demand: Under high light (60 DLI is a very high intensity, potentially saturating) and high CO2, the plant's capacity for photosynthesis is high, and thus the demand for activated Rubisco and the necessary Mg2+ cofactor increases. Mg deficiency becomes limiting: If Mg2+ is deficient under these conditions, the higher levels of Rubisco and Rubisco activase produced cannot be fully activated, leading to lower photosynthetic rates and potential photo-oxidative damage. Optimal range: Studies show that adequate Mg2+ application can enhance Rubisco activation and stabilize net photosynthetic rates under stress conditions, but the required concentration is specific to the experimental setup. Monitoring is key: The most effective approach in a controlled environment is to monitor the plant's physiological responses e.g., leaf Mg2+ concentration, photosynthetic rate, Rubisco activation state, and adjust the nutrient solution/fertilizer to maintain adequate levels, rather than supplementing a fixed "extra" amount. In practice, this means ensuring that Mg2+ is not a limiting factor in the plant's standard nutrient solution when pushing the limits with high light and CO2. Applying Mg2+ through foliar spray is beneficial to Rubisco regeneration, particularly in alleviating the negative effects of magnesium (Mg) deficiency and high-temperature stress (HTS). While Mg can be leached from soil, within the plant it is considered a mobile nutrient, particularly in the phloem. Foliar-applied Mg is quickly absorbed by the leaves and can be translocate to other plant parts, including new growth and sink organs. Foliar application of: NATURES VERY OWN MgSO4 @ 15.0g L-1 in a spray bottle. Foliar sprays are often recommended as a rapid rescue measure for existing deficiencies or as a supplement during critical growth stages, when demand for Mg is high. Application in the early morning or late evening can improve absorption and prevent leaf burn. The starting point [of creativity] is curiosity: pondering why the default exists in the first place. We’re driven to question defaults when we experience vuja de, the opposite of déjà vu. Déjà vu occurs when we encounter something new, but it feels as if we’ve seen it before. Vuja de is the reverse—we face something familiar, but we see it with a fresh perspective that enables us to gain new insights into old problems. Come walk in the enchanted forest.

Girl scout cookies finished

I estimate another 2 to 3 weeks. Then I can harvest. I'm really looking forward to my 2 ladies 🤩😎

easy, all 3 have the same harvest weight, rather small plant, like the yield by the way, but magnificent, colorful buds that already smell super good. now place to dry for my little Mimosa 🇺🇸

Ok had a lot going on this week with various issues affecting plants in flower tent but managed to take few pics and keep u guys updated on this grow feel free to comment or give me any advise I'm a newby out of his debth

Doing amazingly! Actually started flush literally today! So stay tuned to see how chunky these flowers are going to get! They smell delicious! Candy shop in my tent with all these flavours!

Was a good productive week. I did give them a 30hr dark period before switching to 12/12 to really try to take advantage of the red spectrum on my light. (I read this somewhere so giving it a shot!) Also waiting to install second scrog, waiting for them to fill out a little more to help me guide the canopy as even as possible. The insides of both plants have new tops to fill in the gaps. The defoliation last week was the right move. The slower of the two up to this point is the front runner now so let's see how they continue to fill out. Temp finally dipped here so able to keep a more regulated temp. The 77-79 range seems to be what the girls are liking the most so I added a second fan to try and keep the night time humidity lower as well. Any comments or tips are much appreciated! Really enjoying learning all the steps/processes along the way so far! Cheers!

the plants look like they will be ready in 2-3 weeks i only give bloom booster and calmag from here

Lots of pistils coming out. It looks like kind of a mix of its parent strains, which makes sense. I was going to do some final defoliation this week, but the colas are all pretty well spaced out and they're growing so fast you can practically see it with the naked eye. Idk if the added stress from further defoliating the bottom will be worthwhile right now. Dec 26. I went ahead with the defoliation. This always happens, it's just scary to cut pieces off your beautiful babies when they're thriving. But this is the perfect time to do it, when they're healthy and growing strong. Whether or not it helps yield, it will still help with airflow and most importantly, it will allow me to see into the plant to catch any problems before its too late. Several of the leaves I took off were yellowing already. It was hard to take the healthy ones that had been there a long time, but it's for the best. I didn't go overboard, and I can see a lot more of the bud sites now. Things are looking great. I can't get good lighting for photos unfortunately.

Was a pretty smooth week for most the girls. Showing some steady growth. I topped all of the plants around day 12 other than the slurricane 7. Ph got a little high since the nutrient level was too low to buffer it at the beginning of the week. Slurricane 7 and sugar cane are the ones that took some damage. I think they will be ok though. I upped the nutrients to 1/4 tsp per gallon and the ph has held stable since then. Should be able to start some training the middle of next week and looks like we might be going 2 more weeks on veg before flipping them to flower depending on how this upcoming week goes. Guess you will have to show up next week to find out...