Likes
Comments
Share
@Lazuli
Follow
Hairs are still white but what a huge weight this plant has
Likes
15
Share
We've made it to week 3! (10/12/20) I'm very happy with how the girls are going, they have definitely put in a HUGE amount of work over the past 7 days. Plants 3 & 8 are very similar(extremely fat leaves & extra bushy) Plants 1 & 5 are similar (smaller phenos reacting to nutes slightly differently) & Plants 2, 4, 6 & 7 seem to be a cross between the previously mentioned phenos(not too small and not too big/bushy & reacting to nutes fine) Feel free to compare Week 1, 2 & 3 to see the differences. Nutes are staying the same this week, although I will be spacing feedings out a little bit further(18 hours-ish), as well as feeding straight PH'd water once a fortnight. I am contemplating hooking my simple drip-to-waste irrigation system up, although the girls are pretty close to the medium still and the halos sit 5-10cm above the medium, meaning fan leaves would be drooping onto the wet halos, so I'll give it another week and see how they're doing :) Update 11/12/20 - day 22 The girls have beefed up quite a bit over the last 24 hours, I'm really looking forward to seeing a stretch soon :) No feeding today & will water plain ph'd water tomorrow. Update 12/12/20 - day 23 Gave the girls straight ph'd water today with little run off. Veg growth is really starting to boom now, looking forward to seeing where this grow goes! I'm gladly accepting any tips or tricks, as I'm still only a beginner to indoors. Update 13/12/20 - day 24 Girls are looking great today, not much to report. They didn't get a feed or watering today as the medium was still wet after a pure watering yesterday. Update 14/12/20 - day 25 There's been a big increase in growth over the past 24 hours. All the girls besides the 2 smaller phenos look 100% happy, the smaller ones have looked a little weird since day 1(Weird as in colour of the fan leaves look deficient of something, but I'm not sure what. The girls will be getting a full feeding today. There's still no signs of sex but they are feminised seeds. Update 15/12/20 - day 26 Girls are looking happy today. Temps are back to normal after a heat wave in my city(its only going to get hotter from here on out). No feeding/watering today, pots are heavy/wet enough. Started using iphone for photos now, my only lens for my DSLR is useless for most grow related photos. I will upgrade my lens before next grow. I received my new silenced fan today! I couldnt be any happier :) It is a silenced Sigilventus SE-A150J, which I have set-up with a brand new Can-lite carbon filter. I went from a rocket loud eBay fan to a completely silent inline EC fan :D I hope the girls like the silence! Update 16/12/20 - day 27 The girls are continuing to boom! and I'm over the moon about it :D I gave them a full feeding today. I have seen white pistils coming out of calyx's on most of the girls, so i'm hoping they start to flower soon. I'm having weird issues with my humidity, it seems to be fine at 40-50% for 70% of the day, but the remaing 30% of the day it goes up to 60-65%. Temps stay the same in the 5x5 tent, I have ducted air-con in the house which is on most of the day. Thanks for viewing! :)
Likes
422
Share
Hi everyone 😁 Welcome back on another week update. So far everything going as well as can be. Both 🍌💜👊 girls developing very well. This week I have reduced root juice by half and by the end of this week may introduce fish mix and biogrow on very small dose but all will depend how girls will be developing in coming days. Thank you all for all the likes comments, follows and pm's. Love you all 😁💚 I will keep updating this week progress every few days. Wishing you all a wonderful week ✨🍀✨ Peace and love brothers and sisters ✌️💜 23/10 day 15 Smooth development on both baby girls. Watered with approx. 300-400ml each pot on the entire surface. 26/10 day 18 Girls are growing very nicely. Today another watering approx. 200ml each of 🍌💜👊 girl. Still spraying water around the surface everyday. 29/10 day 21 It's been a perfect week. No issues at all. Very steady growth. Next week will introduce to my 🍌💜👊 girls few new dishes and possibly will start with LST. Thank you all for such a great support 😊✌️💚 Wishing everyone a wonderful upcoming week✨🍀✨ Peace and love brothers and sisters ✌️💚
Likes
92
Share
Week 7 Veg Report 🌿✨ Hey Grow Fam! 🌱 Week 7 of veg is here, and let me tell you, the grow room is buzzing with life! Each of the girls is showing off her unique personality, and I’m especially stoked about the Papaya Zoap—she’s really coming into her own! The scrog net is nearly filled out just how I wanted it, and I can feel we’re so close to flipping to flower. The anticipation is real! 😁 But before we get to flowering, let’s take a dive into something that makes this grow so smooth—ThinkGrow LED drivers and cables. ThinkGrow LED Drivers – Plugging Into Success 💡🔗 This week, I had a chance to work deeper with the ThinkGrow LED system, and honestly, it’s like a dream come true for efficiency. I’ve been using the TLD-4 Four Spectrum Control Channels Model One LED Driver, and let me break down how it works. The drivers attach directly to the bars—super sleek and no extra bulk. And, the connections? It’s a matter of matching the male and female connectors on the TDC-2 Daisy Chain Cord. It’s like a simple puzzle that snaps together perfectly. The TDC-4 cord takes it to the next level, connecting the top bars to the ICL-300 Inner-Canopy LED Bar, giving complete control and balance across every layer of my canopy. Why is this important? The driver-to-bar connection ensures that each LED bar is operating optimally, and the daisy-chain system makes it effortless to manage multiple bars without a ton of wires everywhere. It’s neat, efficient, and delivers even light distribution, which my plants are loving! 🌞 Are My Girls Ready for Flower? 🌸 When I look at the plants up close, it’s like they’re whispering, “Flip me to flower already!” 😆 Their growth has been so vigorous, each filling out the space with character, and that scrog net is almost fully covered. So, I’m thinking we’re super close to the big switch. Each plant has its own pace, but as a whole, the grow is looking fantastic! Room Stats – Tuning Into the Environment 🌡️ The TrolMaster system is still killing it with data and control, making it easier for me to keep everything balanced. Here’s a quick breakdown of the week’s environmental numbers, and a few jokes along the way! 😜 • Room Temps: Max 25.5°C | Min 24.4°C (Keeping it cool but not too chill!) • RH: Max 76.4% | Min 67.1% (Humidity stays right where it needs to be.) • CO2: Max 832 ppm | Min 420 ppm (Shout out to that magical 420! 🌬️😂) • VPD: Max 1.06 kPa | Min 0.64 kPa (All dialed in for peak veg mode.) Light Levels – All in the Details 💡 • Max PPFD: 506 | Min 0 (because, you know, when the lights are off, it’s dark! 🌚😆) Keeping the light intensity balanced, and using the ThinkGrow LED system to spread that goodness across the entire canopy, I’m seeing explosive growth. Those PPFD levels are perfect for this stage! Water & Nutrients – The Lifeline 💧 • Solution pH: Max 6.32 | Min 5.78 (Keeping it in the perfect range.) • TDS: 355 ppm steady (Every drop counts, right?) • Solution Temp: Max 23.5°C | Min 22.3°C (Keeping things cool, just like the grow!) And medium moisture? It’s a solid 100% thanks to my AutoPots and the genius of the AquaValve system. No electricity needed—just gravity doing its magic. It makes my life so much easier, and the girls are loving the consistent hydration! No more worrying about under- or over-watering. Why I’m Obsessed with TrolMaster 📱 I can’t talk about this grow without shouting out the TrolMaster system. Every bit of data—whether it’s temperature, RH, VPD, CO2, light intensity, or pH—gets tracked and displayed in real-time on my app. It’s like having a grow assistant in my pocket, making sure I can monitor and adjust at any moment. The level of control I get with TrolMaster is out of this world, and it’s helping me keep everything dialed in perfectly. Ready to Flip Soon 🌸 With the Papaya Zoap filling out so nicely and the rest of the plants following suit, I feel like we’re right on the edge of flipping to flower. It’s going to be a smooth transition, and I can’t wait to see these beauties bloom! Stay tuned for next week, where we might just make that flip! 😉 Environment Stats Recap 📊 • Room Temp: Max 25.5°C | Min 24.4°C • RH: Max 76.4% | Min 67.1% • CO2: Max 832 ppm | Min 420 ppm (Seriously, shoutout to 420 again! 😂) • VPD: Max 1.06 kPa | Min 0.64 kPa • Light PPFD: Max 506 | Min 0 (obviously, when the lights are off! 😜) • Solution pH: Max 6.32 | Min 5.78 • Solution Temp: Max 23.5°C | Min 22.3°C • Medium TDS: Max 430 | Min 420 (I can’t get enough of these 420 jokes! 😆) Final Thoughts 💚 This week has been a blast! Between the ThinkGrow LED system and the TrolMaster gear, I feel like I’m pushing the limits of what’s possible in indoor horticulture. Everything is dialed in, the plants are healthy, and the data just keeps showing that we’re right on track. Shout Outs! As always, huge thanks to TrolMaster and ThinkGrow LED for the amazing gear, to Aptus Holland for their top-notch nutrients and Pro-Mix for the best soil i have used so far. Big love to the seed banks, the amazing Grow Diaries community, and all my followers—you guys make this journey so much more exciting. Don’t forget to catch up on my social media, Instagram, and YouTube for real-time updates and exclusive content! Stay tuned for more—next week is going to be epic! DogDoctorOfficial Discount Codes so you can save big on your next check out 💚💚💚 Kannabia - DOGDOCTOR 30% off SeedsmanSeeds - DOGDOCTOR 10% off CannaKan- DOGDOCTOR 15% off terpyz.eu - DOCTOR 15% off The Neutralizer - PORKIT5-DOG 15% off As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏
 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 Friendly reminder all you see here is pure research and for educational purposes only Growers Love to you all 💚💚💚
Likes
5
Share
@Chubbs
Follow
Weekly update on these big girls. I decided to take out some of the lower branches, giving more airflow at the top of the pot level. Overall they've exploded with growth this week. I'd say they're getting close to 4ft tall. I sprayed some BT spray for ipm this week since I don't want catapillers showing up unannounced. All in all Happy Growing.
Likes
1
Share
Both plants have just finished their final stretch. The Atlas has almost tripled in size over the last two weeks and now stands about 75 cm, while the Epsilon and its more dominant Indica rest at about 60 cm. The only thing I have had to do in five weeks is measure the lux amount to keep it at 40,000 at the top of the canopy by raising the lights, and I have watered both five times, with the last watering adding bloom and top max. I am very impressed with the node spacing and uniformity. Up to this point, these are the easiest plants I have ever grown, so I have already germinated another two Epsilons and am in the process of starting another Atlas F1, Gaia F1, and Apple Fritter. I estimate about 4-5 weeks flowering left for the Epsilon and 5-6 for the Atlas.
Likes
9
Share
FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 REMO NUTRIENTS 👍 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Processing
Likes
25
Share
These plants are exciting! 🤩 (Today is day 22 (from sprout with green). We have two plants here. Both are G14’s. Plant #1 we topped on day 11. Plant #2 we are letting it ride out to see what it does, but with a bit of help from LSTraining. Plant #1 is measuring around 7.5 inches but that’s on an angle as pictured, next time I untie it to rearrange I’ll try to get another measurement. Plant #2 is around 5.5in. Both are just doing great and changing daily! Even from night to day we notice a difference! Both are receiving fox farm plant food and calmag each watering. I removed those super big fan leaves today so I’m hoping they do ok with that. 🤞🏼💪🏼🤩 As I’ve said in my other journals, I take a lot of pics lol. I’m here to learn and to help when I can and I love to see everyone’s baby’s grow 😍 Thanks for checkin mine out! Cheers to another week 💨 💨🤞🏼🤞🏼💪🏼💪🏼🤩🤩
Likes
20
Share
Nice bud formations this week.... Can't wait to see it full grown
Processing
Likes
2
Share
Sup tho you guys there’s a lot going on at 48219 Krud Buddys Grow House and I’m starting to get better with keeping track of everything Today is April 11, 2020 and I’m excited because I took some cuttings on the 3-4th and today all of them are showing roots out of the Rockwell I only mist them once a day and sat the dom on top of a heating pad on low and their doing they thang April 4th : I took down my 4x4x8 diy tent Moved to a different room in my grow area n turned it to an 2x4x8 and put my Gorilla Cookies and Peanutbutter Breath under an diy scrog net with my Fsgtek 600w LED hanging 18in above plants. this is the end of week one of being in the room under the scrog net on April 25th I’m going to flip them to flower and start the count down I also order some diamond film and glued it on the walls in my other room in my grow area and using it as an veg room with my 1200w Aglex LED and 250w Grow Bulb hanging from the ceiling I have a variety of strains in the veg room I have Sherbetlato, Wedding/Birthday Cake, Grape Pie, & Girl Scouts Cookies are clones I got from a grower I know here in Michigan I also have some seeds I ordered herbieheadsshop 2 Blue Berry Pie, 1 TurtlePie, 1 FruitPunchAlien and I have my clone cuttings that showing roots which is 2 wedding cake 2 sherbetlato 3 Peanutbutter Breath 3 gorilla cookies which are getting put into solo cups today Well that’s about it for what’s going on this week I will be keeping you guys updated as I grow and learn Subscribe to my YouTube channel AintThatFlame or search #48219KrudBudds
Likes
15
Share
@Oetelando
Follow
Week 8 of Flowering. I think in 9-13 days i Harvest them. Trichomes get Browner everyday. Woche 8 der Blüte sind im Endspurt. Wahrscheinlich werden die in 9-12 tagen geerntet.
Likes
35
Share
Little bit of work this week but mostly an easy week watching the ladies grow and adjust to their new homes. On day 22 from Seed repotted the girls to their 2 gallon homes. I like to go from cups to 2 gal for veg then up to 5 gal for flower. Roots looked good and healthy already filling the cups well. Probably why they were needing water almost daily before transplant! Did the usual amendments (all purpose, basalt Rock, dia earth, and dynomyco) and living 50/50 new soil and reused soil from last grow. They all seemed to take it well, sad for a few days but I think I gave a bit too much water when transplanted. Now they're perking back up nicely. Late week did a Diatomaceous Earth treatment on top to keep bugs away. Will get the food out of tent this week and will be no more worries after that. Hope everyone has a happy 4/20 and a good grow week!
Likes
Comments
Share
This was my first attempt at growing autos she triggered a little to early being the reason she is so squatty but I'm sure she's still going to be just as good as a plant twice her size I most definitely learned a lot about the auto flower that I didn't know before so I made adjustments on my second auto flower that I'm growing she is about 40 inches in height and filling out nicely i'm going to let the plant pictured go another week or so to make sure she's completely done I will post pictures and video of the harvest
Likes
4
Share
@AustinRon
Follow
OG 4Q24 Flower Week 9 Orangegasm (Fem) [ IRIE Genetics ] 12/12 @ Bolt (Day 21) Germination: 20 November 2024 #3A Earliest Harvest Date: 9 February 2025 #3B Latest Harvest Date: 19 February 2025 _________________________________________ Start of Week: [Wed Feb 5, 2024 CR2 4Q24 57:F:8:1] End of Week: [Tue Feb 11, 2024 CR2 4Q24 63:F:8:7] OrangeGasm Fertigation: - MAX: EC: [ 2.4, mS] #Ramping Down - LightIntensity MAX: [ 850, µMol/m2/s] ______________________________________ OBJECTIVES - Ramp EC from 2.4 - 1.0 - Start rolling off Primer A&B/Silica Skin to Resin Bloom . . . __ Wed Feb 5, 2025 OG 4Q24 57:F:8:1 EC: 2.3 Notes: #5 looks like a 60 day plant, if so - consider Saturday Harvest … Runoff - [x] Amount: [ 0.125 , gal] - [x] EC: [ 4.4 , mS/cm] - [x] EC∆: [ 2.5 , mS/cm] # Fried Yet? ;-} Harvest Dehu - [x] Amount: [ 1.5 , g] __ Thu Feb 6, 2025 OG 4Q24 58:F:8:2 EC: 2.3 Refresh Reservoir - [x] Amount: [ 2 , g] - [x] EC: [ 2.3, mS/cm] - [x] Primer A&B: [ 31, ml] - [x] Silica Skin: [ 15 , ml] __ Fri Feb 7, 2025 OG 4Q24 59:F:8:3 EC: 2.3 __ Sat Feb 8, 2025 OG 4Q24 60:F:8:4 - [x] Disassemble, Clean Reservoir and Pumps, Reassemble Refresh Reservoir - [ ] Silica Skin: [ 15 , ml] - Dropping Silica Skin due to (sparse to medium) granular precipitate - [x] Amount: [ 6 , g] - [x] EC: [ 2.1, mS/cm] - [x] Primer A&B: [ 100, ml] EC: 2.1 @1900 - Clear Manifold Filter. (Mainline should be cleared on 1845 feed __ Sun Feb 9, 2025 OG 4Q24 61:F:8:5 - [x] Dilute to EC 2.0 - Flooded Tent, 2 Gallons PLUS of Runoff. Happy Plants. - Shout Out Shop-vac. ;-} EC: 2.0 __ Mon Feb 10, 2025 OG 4Q24 62:F:8:6 EC: 1.8 HAND APPLICATION Prepped One Gallon of 12-8-7-5 @ 1.8 mS/cm w/ PhotoSynthesis Plus, SLF-100 Reclaimed Dehu Water, ~2 Gallons Refreshed Reservoir, 2 Gallons Rooted Leaf Hydro no Silica Skin, EC: 1.8 mS/cm Reduced watering to 5 min, then 1 - 1 -1 -1 -1 -1 -1 -1 (It’s not like they’ve been under-fertigated) __ Tue Feb 11, 2025 OG 4Q24 63:F:8:7 EC: 1.7 - [x] EC: [ 1.7, mS/cm2] - [x] Refresh Reservoir - [x] amount: [ 2.5, gal] Runoff - [x] Amount: [ 0.5, gal] - [x] EC: [ 3.6, mS/cm2] - [x] EC∆: [ 0.9, mS/cm2] # Better than 2.5! PLANT POSITIONS 3 5 1 7 4 2 6 8
Likes
47
Share
@S2340420
Follow
Boom another 1 in the bag smoke report and weigh in will. Follow