Hello everyone 😎 Week 3 of flower for the Banana Purple Punch auto from Fast Buds 💥 She grew fast with a beautiful green color,for the nutrient 4ml/L terra bloom & 1ml/L power buds from Plagron Mars Hydro SP-6500 70% Have a nice day 😋

I'm glad I found GD it's helped me asking the prices of this very First Ever grow... plug.. I learned allot and have started germinating my next set. On to the next One/Week...

Only 11cm vertical growth this week. Flowering stretch slowing down and she's bushed out so much!!!

Just into 4 weeks flower . Increase bloom. Stop using grow .

Boy oh boy am I excited to see how this one finishes. Still 3 or so weeks out from harvest, but she will certainly be a good one. I cannot wait to see how she smells after a nice long cure.

went from 15 to 14 and then to 12 h - after second defoil in a few days and a 24 H lightday after that. 250 Watt HDL reactivated. Now giving them 6h 240W LED (1300PPFD) and 6 h 250 W HDL (1400PPFD) with 1h overlapp. Now using all of the Hesistuff like in the Plan : Root, Enzym, TNT, Phosphor, Bloom, Booster + Vitamins. Dripper overwatered a bit - back to handfeeding it. The Amnesia is now ca 2 Weeks behind the GG4 Auto with the bloom, i hope i can stretch it to at least 4 weeks. With the 12/12 light she should start to flower in the next days. But 3-4 Weeks would also be ok. plants seems happy with the haircut and the new lightsituation. room cleaned. - the LEDS are not as good as the HDL , they make a bit more PPFD from distance, but in shorter range and with good Fans the HDL is way better for the plant. Have to build a small Box for the veg phase of small plants and one for a motherplant & cloning.

So were in week 7

7/28/19 --Super happy to see the plants doing this well. Ive found that every other day feeding is the best for these specific plants. Im a big proponent of only watering the plant when it signals it is ready for watering. The least possible amount of induced stress for these plants is the goal for me. Cheese seemed to be totally unaware of the FIM that was done on it, as it showed not even 1 sign of stress post FIM. Cream cookies is another story, she's quite sensitive to absolutely everything--including watering. I am super happy to see that the last fan leave on the 5th node has 9 leaves--a really good sign that the plant is doing extremely well. The more leave nodes on each leave the healthier than plant. There are zero signs of nutrient burn at all. It was difficult at first to see if the slight bending of the leaves was due to nutrient burn, but I later figured out that the leaves were pressing against the side of their pot and as a result bending--wasnt nutrient burn. Ive been varying the pH widely each week--with the attempt to be as random as possible. I want to make as many nutrients available to the plant as absolutely possible. I really am loving the Advanced Nutrients Sensi line. Im growing in coco but I bought the nutrient mix not designed for coco with the understanding there might be some potassium issues down the road. But otherwise as a chemist by profession, when I heard about the pH perfect line I was rightly skeptical. It will balance your solution to the correct pH range (5.6-6) IF you start with dead neutral pH 7.00±0.05 water with no dissolved salts (distilled water). the distilled water I've been buying (from Walmart) clocks in on the pH meter at around 7.6-8.6 which will cause the pH perfect technology to neutralize some of the dissolved ionic species and bring the pH well below safe range for cannabis. Ive found that if you pH the distilled water to 7.00--add your Ca/Mg/Fe, THEN add the pH perfect technology the range will be much more suitable. It was kind of annoying since my pH down is so much more concentrated than my pH up. Me problems I know but still annoying. --One of my amazing collages at work is going to water both babies today with Week 4 nutrient solution even though we are technically in week 5. My vacation has prevented me from mixing the solution to feed. --This vacation has brought so many new automation ideas to coco coir growing. Ive been developing a hypothesis that involves what I call the "level of droop age" and its correlation to plant thirst. It began when I was growing in soil and needed a better way of telling when to feed the plants instead of a fixed schedule, which seemed to be giving way too much water to the plants. ---Ive developed a "droop scale" which can be directly correlated to plant thirst. Ive also found that very happy plants that do not want water will go through a natural droop cycle as night approaches. I take this as the plants time to grow out its root system (happens at night). By the morning the leaves are pointing up in what I call "leaves up loving life" ---So the scale I've developed is kind of arbitrary but it does a really good job imo if you become very familiar with your plants. ---The scale ranges from -10 (the most droop in the leaves every observed) to +10 (the most extreme leaves up loving life ever observed). the scale is out of 10 not 20. ---lets say that you watered your plants today, and their leaves were at a -7/10 droop (what when I water my plants). If you water them you should observe no increase in droop--in other words after watering the droop should only improve not regress. If the droop increases after watering your plants wanted a little more time before their feed--so alter your droop scale until you find the level of droop that when feed causes only an increase in the droop. 6 hours after watering you plant droop should be >+1/10. The next day you should see your plants at least at +5/10 droop. ---Merging this scale with automation is going to be difficult as ill have to use an open source machine learning AI to learn when the plants droop is sufficient enough to justify a watering. I hope to set up the system to be automated or manually operated over the cloud. ---Using a Raspberry pi and an Arduino as well as a whole set of motor control boards and sensor boards I hope to put together an integrated system that can detect when the leave droop reaches critical levels using a camera, and feed accordingly. Ive been all over the internet and all automated grow projects rely on soil moisture sensors which only penetrate <4 inches into the substrate. This doesn't cut it for me as the root ball of the plant is way below that 4 inches of the sensor, yielding readings which only pertain to the top layer of soil, which just so happens to dry out the fastest. ---Im going to keep my grows at 2 plants each from no on--and I plan to make an automated system for both plants which can control watering to both plants individually. Im currently trying to figure out the best way to track volume of water dispensed. A flow meter with a know diameter tubing and a known diaphragm pump rate seems to introduce all sorts of inaccuracies into the mix. I think im going to design an automated measuring system that uses an ultrasonic distance sensor coupled with a camera and AI to fill up a the hopper to the desired volume of nutrient solution. ---I have all the hardware listed but im a complete dumbass when it comes to coding. My profession is chemistry, coding goes right over my head. I have an immense respect for coders as I honestly have no idea how you guys do it. Its like learning 15 different languages at once and using them all together. Blows my the ability of our society. The wide range of skills. Love it. ---If anybody would like to help me code this project it would be greatly appreciated. 7/30/19 -Cream Cookies is doing extremely well. FIM was a great idea. 4 new main cola sites came out of the FIM which im very happy about. The undergrowth also has caught up to the canopy. the canopy has a plethora of bud sites. Defoliation done to increase light to bottom branches. Largest fan leaves towards the canopy removed. FIM'ed leaves that opened up also trimmed, allowing more light to penetrate to those small bud sites. --Ive counted sites where main colas can form. Very happy with this HST I decided to do. --LST done and branches separated from each other so they can receive ample light. Thinking of adding supplementary 40W flowering bulbs for flowering. -Cheese FIM didn't work as intended but it did break the symmetry of the plant. One of the first branches has grown higher than the canopy and I had to tie it down using LST. Did some defoliation and going to do some LST later. --Some light stress spots on Cheese, makes sense since I wasn't physically at my apartment to raise the lamp. Before raising the lamp the plants were 14 inches from the light which is way too close. The closest it should be is 17 inches. Raised the lamp to 18 inches and spots are subsiding. --Being overly cautious ive increased the dose of Ca/Mg/Fe to 4 mL/gal incase spots are actually a Ca/Mg/Fe deficiency from explosive growth. 7/31/19 -Cream Cookies is showing beautiful pre flowers. Still recovering from light stress. Looks very similar to nutrient burn but only present in tip most growth suggesting light burn. 14 inches was way too close-vacation problems lmfao -defoliation done on both cheese and cream cookies to expose bud sites -LST done on both cheese and cream cookies to bring bud sites into the light -both plants fed 400 mL Week 5 nutrient solution-when I mix next weeks nutrient solution im going to reduce the concentration to 12mL/gal w/ 3mL/gal Ca/Mg/Fe. --I want to precent any nutrient burn plus plants are slightly stressed from defoliation and light burn from my vacation. -lamp raised to 19 inches to help aid in stress relief -plants are responding in a weird way to the watering. Not in a bad way-but in a different way--larger lower leaves are not drooping like in the past its just the much newer growth is drooping. Makes sense since newer growth has less developed support system. Makes me feel much better about my watering schedule. --Clawing which I suspected was due to light stress is getting better-especially after a feeding. 8/1/19 --Calcium deficiency just barely showing on midlevel fan leaves. Good thing calcium is a mobile nutrient. Going to readjust the nutrient solution ph to be 6.2-6.3. Been accidentally locking out calcium. --Defoliation done on both plants to expose more bud sites and to thin out the thick canopy so light can penetrate below. The hope is to defoliate correctly. If done right I won't have to lollipop. --Cheese has no preflowers yet--still in veg --Cream cookies looks like it started flowering. 2 preflowers were spotted earlier in the week. Surprised to see how fast the plant moved into flowering. Going to be feeding it with flower nutrients starting week 6. --Going to continue feeding cheese with veg solution until preflowers are observed.

**** Tue 17 Dec **** 5 weeks from seeding My efforts to keep humidity up seem to be paying off Also bought a small humidifier - will see how well it works I've released all the LST restraints - they have a bit of room to stretch now Annoyed now as I've run out of plug sockets (1 light, 1 inline fan, 2 clip fans, 1 heating mat, 1 humidifier, 1 radiator) Better not need anything else... **** Thu 19 Dec **** Humidifier was installed on Tuesday - they love it at 40-45% - that really was the problem These plants do not like 20% humidity. Also I chucked in a 14W blurple LED which I got for free - every little helps The bigger "red" plant has a few leaves which were burned on the radiator in the small tent - think I'll nip these off The "black" plant on the right is now recovering and really going for it See video **** Sat 21 Dec **** All going remarkably well **** Sun 22 Dec **** Here we are 40 days from seeding, and there isn't much for me to do The humidifier uses about 3 liters every day, so needs refilling once or twice (it takes 2.2L) They are now easily drinking a liter of water each a day - the pots are dry and light when ready for more I'm giving them a small dose of 7-7-7 every other feed - it doesn't seem to be causing problems The fan & filter are sucking in plenty of fresh air and there's no smell at all (if I were to switch it off there would soon be a mighty stink!) So far lots of flowery pistils but no "sugariness" - I'm sure this will come when ready The "Red" plant has always been more vigorous - this one is a bit more spread out horizontally and I've trimmed away leaves that were in the way. While growing faster, a lot more lower leaves have turned yellow on this one so I've trimmed these off. The "Black" plant was always a bit behind, and it did not like low humidity at all (at one point I thought it was done for) But since I got the humidity up this plant has really got its act together - in fact now it's probably heavier than Red. This one has had virtually no LST and I've only trimmed a very few lower leaves. At this point I'm thinking the best thing to do in this box (70 x 70 cm) would be to grow 4 of the same in 11L pots Would really fill the space very quickly Anyway lets see how this first grow works out **** Tue 24 Dec **** Red on the left is starting to build a bud structure And on top of the main cola there are signs of stickiness and some tiny trichomes Must sort out a better camera as my phone is rubbish Black on the right has taken off - she's taller than Red now She may be slower but I think there'll be a bigger yield off this one If I leave the tent door open for a few minutes I can smell them from 10 feet away. Without the filter I would have a problem That's the end of week 6 Compare the start and end of this week and there's been a fair bit of growth going on

~ Auto Skywalker Haze®️ by Dutch Passion ~ Skywalker Haze x Auto Amsterdam Amnesia Well friends, here we go on another 'canna-venture' together cultivating Dutch Passion's Autoflowering version of their outstanding Skywalker Haze along with three other incredible autoflowers from Dutch Passion that I'm running separately, so buckle up and hold on! This will be a wild ride for sure! I've wanted to grow this strain for some time now and finally have an opportunity to see what I can do with it, and I've germinated two so double the fun! "Auto Skywalker Haze has a very pungent and fruity aroma! The incredibly firm and frosty buds give off a strong lemony, yet sweet, haze-like scent. The citrus and haze notes are clearly dominant. The combination of the fruity, sour, pungent citrus-dominant terpene profile with the more pungent, spicy haze character makes this a strain for real enthusiasts. The buds are completely covered in trichomes and in addition to providing a high cannabinoid profile. It also gives a true taste explosion. The terpenes are in abundance and they provide an exceptionally strong fruity haze taste. " ** "Auto Skywalker Haze is currently Dutch Passion's most potent autoflower with THC levels over 25%! 26.2% to be exact! This makes this strain even stronger than most of the photoperiod seed strains currently available worldwide.** "The feminized Skywalker Haze is a cross of our original and classic Skywalker variety, which consists of a cross of Mazar x Blueberry which in turn is crossed with an Amsterdam Amnesia from the Amsterdam underground scene. By crossing this photoperiod Skywalker Haze genetics with Auto Amsterdam Amnesia, Auto Skywalker Haze was created." ** "Auto Skywalker Haze produces robust and stable autoflower plants. This Sativa dominant cannabis strain is known for strong and sturdy plants that can take a beating. Most ladies grow into large plants with a real Sativa appearance. These phenotypes can grow quite tall with wide and long branching, thin leaves and elongated Sativa buds. These phenotypes usually take a little longer to mature. The flowers, which are completely covered in crystals, may have a tendency to foxtail slightly, but that doesn't take away from its true beauty. These buds also become a lot more compact than you might expect from the Sativa appearance. There are also phenotypes that remain just a little more compact and tend more towards the hybrid side. These mostly Skywalker-dominant phenotypes grow very hard and compact buds, sometimes reaching as thick as a Coke bottle. All plants have a good flower-to-leaf ratio and trimming the plants is relatively quick. Some plants can even be picked completely by hand and are ready really quickly. The small sugar leaves are also completely full of resin and trichomes, so you don't necessarily have to be very precise. If you want use it, then you have excellent trim to make your own hash, oil or other cannabis concentrate. Auto Skywalker Haze generally has a short internode distance. The flowers can grow nicely together and completely fill the branches from top to bottom with sticky buds. Most Sativa-dominant plants usually have a little more space between the buds. This lady can also stretch a lot. Outside we have seen occasional plants that have reached a height of more than two meters in the open ground. That is very exceptional for an autoflower."** "Auto Skywalker Haze generally takes about 12 weeks from seed to produce fully mature plants ready for harvest. There are two phenotypes of Auto Skywalker Haze that take a little longer, around 13 to 14 weeks. These are really worth the wait! During the last few weeks the buds get a lot thicker and heavier and the potency continues to increase. Outdoors, Auto Skywalker Haze takes an average of between 12-15 weeks to fully mature." ** **Credit- Dutch Passion.com ______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ~THE SETUP~ ~ Grown in 15L Gronest geotextile pots filled with Mother Earth Grow 70/30 Coco/Perlite with Xtreme Gardening Mykos added. ~ Seeds were germinated directly in the medium without any 'pre-soak' ~ Seeds were planted three days before the Full Moon (Waning Gibbons) and sprouted within 72hrs, on the Full Moon. ~ Feeding will be by Lotus Nutrients (first time using) ~ 24hr light cycle while germinating ~ 20/4 light cycle after first leaves appear. ~ 4x8 Gorilla Tent ~ HLG 650R w/ 30w Supplemental UVA Bar controlled by a Trolmaster Hydro X controller set for a 15min Sunrise/Sunset simulation. (also a HLG Blackbird for additional side lighting if necessary) ~ Supplemental co2 controlled by an AutoPilot APC 8200 co2 controller ~ AC Infinity Cloudline T6 with Controller 67 using a Terrabloom 6x24" carbon filter ~ De-Humidifier and Humidifier when needed. ~ 14k BTU IdealAir portable A/C unit plumbed into tent for temperature control. ~ BlueLab testing instruments ~ Two Hurricane 18" oscillating fans ~ Two 6" Clip-on fans ~ Two 10" floor mounted fans ______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ As a cannabis grower, I recently had the pleasure of growing two Dutch Passion Auto Skywalker Haze plants indoors. This hybrid strain is a cross between Skywalker Haze and Dutch Passion Auto Ultimate and is known for its strong cerebral effects and uplifting high. In this report, I will share my experience growing Dutch Passion Auto Skywalker Haze and provide some 'High Humor'. ~Growing conditions~ I grew my Dutch Passion Auto Skywalker Haze plants indoors in a 4x8 Gorilla tent. I germinated both seeds directly in the Coco/Perlite medium and both sprouted within 72 hours! The growing environment was kept on point with the help of an AC Infinity Cloudline T6 exhaust fan coupled with their Series 67 Bluetooth Controller along with two 18" Hurricane fans, two floor mounted 8" fans and a 6" clip on fan providing ample air movement. Also crucial to this grow was the supplemental Co2 via a 50# tank regulated by an Autopilot APC 8200 Co2 Controller that I set to keep the tent at 700-1200ppm's throughout the run. Tent temperature's ran between 68-78℉, humidity was kept between 40-60%. I used a lighting schedule of 20/4 for the entire grow with a pair of HLG 650R's that also have supplemental UV bars attached. The exception being the last three weeks, where I added 4 hours a day of UV, and cut the cycle back to 19/5 for a week, and then finally to 18/6 for the last two weeks. I used Lotus Nutrients for the first part of this grow but became concerned when I noticed that I was getting yellowing I used starting on the #1 plant going from the bottom up indicating to me that their was a problem with the nutrients. Let me say that I'm VERY OCD when it comes to the PH/EC of what I feed my babies, following all of the recommendations from Lotus, but continued to see the yellowing progress. I then switched to Dutch Pro liquid nutrients and within two feeds I could begin to see a noticeable difference in the #1 plants color and overall health! As I continued using the DutchPro nutrients the #1 plants health, vigor and color continued to dramatically improve all the way up until harvest. I can honestly say the I believe switching to DutchPro nutrients saved this grow from a possible dramatic failure! ~Flowering time~ My Dutch Passion Auto Skywalker Haze plants had a flowering time of 93 days from seed to harvest for the #2 plant and the #1 in an unbelievable 113 days! The #2 reached a height of 23" and produced yield of 116g, while the giant #1 plant came in with a whopping 279g total yield and grew to just shy of 40" tall! In addition to all the tasty flowers that these two plants provided, I took the 'sugar trim' from them and ran it through my sift screens resulting in a 24 gram mound of sift on the first sift! And now for some 'High Humor': ~Growing Dutch Passion Auto Skywalker Haze was a bit like being a Jedi, except instead of using the Force, I used Coco/Perlite and DutchPro nutrients. ~ My Dutch Passion Auto Skywalker Haze plant was so big and beautiful, it could have been featured in the Millennium Falcon's garden. ~When it comes to smoking Dutch Passion Auto Skywalker Haze, it's like taking a ride on the fastest ship in the galaxy - it's a real trip. In conclusion, the Dutch Passion Auto Skywalker Haze was one of my all time highest yielding and longest growing autoflowers to date. It was a very easy strain to grow, and it only required minimal care and attention to ensure that it grew to its full potential. Cultivating these two Dutch Passion Auto Skywalker Haze plants indoors was a great experience that resulted in two beautiful and high-yielding plants. Smoking the buds provided a strong cerebral high that was uplifting and energizing. I would highly recommend this strain to other growers looking for a relatively easy to grow variety with strong effects. May the Force be with you as you embark on your growing journey... May all your days and grows be Blessed! 😎🙏❤️ References: Dutch Passion. (n.d.). Auto Skywalker Haze. Retrieved from https://dutch-passion.com/en/cannabis-seeds/auto-skywalker-haze Leafly. (n.d.). Skywalker Haze Strain. Retrieved from https://www.leafly.com/hybrid/skywalker-haze

Light hitting with around 1000 PPFD She is looking beautiful! Smell is getting realy intense. Plant training did its job - many same size Buds with same quality. One of my favourite grows so far!

Hello Diary. We’ve come to the last week of hanging out with dear Hulkberries. 😎 I checked under a microscope, and the Trichomes became milky and some on the upper flowers start to brown. So I decided to leave them for a few more days and then do the harvest. 😀 On day 53, I removed the larger leaves on both plants and lightened it a bit in its final days. I have also slightly improved the airflow through the plant given the temperature and humidity in the air which is still higher than I would have liked.😖 As can be seen in the pictures, the flowers are nicely filled, especially the main cola, the branches bend under the weight of the flowers. That's why I didn't want to take them out to another room for a photo shoot, since I'm going to take more detailed photos of the plants before the harvest. 😍 For a little over ten days now, I have been watering it only and not adding any supplements or food. But let’s look at what this week looked like. 09/08/2020 - Day 52. Watering. This time I watered only with water, I did not add BioBizz. I still regulated the water at p.H 6.5 with Plagron’s, Lemon Kick. Each time I prepare 7 lit. water and with that I water all three plants evenly. 10/08/2020 - Day 53. Defoliation. I removed the larger leaves from both plants. 12/08/2020 - Day 55. Watering. Just water. 13/08/2020 - Day 56. Photographing the end of week 8. That’s it, we’ve come almost to the very end, but there’s more riding until I taste this strain. I can't wait for that moment. See you next week at harvest.

Всем тем, кто следит за мной здоровья и удачи. Наступило время вновь обновить «LSD» от «Barney's Farm». Уже четвёртая неделя от прорастания семечек. Прогресс очевиден. Я планирую выращивать клонов с нижних веток, именно поэтому я сделал дефолиацию на ранней стадии и не стал формировать крону, так как нижние ветки растения будут клонированы. Дефолиация полезна не только тем, что открывает свет боковым веткам, но также огромные листьев не забирают важные гормоны роста. В этот раз не стал добавлять какие-либо удобрения, а пролил обычной водой с пониженным PH. Так же я подключил дополнительное освещенье полный спектр LED по 27W. Теперь я оставлю растение в покое и буду ждать, когда отрастут ветки на клонирование. ---------------------------------------------------------------------------------------------------------------------------------------------- All those who follow me health and good luck. It's time to update the" LSD "from" Barney's Farm " again. It is already the fourth week from the germination of seeds. Progress is obvious. The average height of plants is 13-15 centimeters, which is much lower than the other two strains, but their leaves and internodes are shorter. I plan to grow clones from the lower branches, which is why I did defoliation at an early stage and did not form a crown, since the lower branches of the plant will be cloned. Defoliation is useful not only because it opens the light to the side branches, but also because the leaves do not take away important growth hormones. This time I did not add any fertilizers, but spilled it with ordinary water with a low PH. I also connected additional lighting with a full range of 27W LED. Now I will leave the plant alone and wait for the branches to grow for cloning.

Hey Growmies! I’ve been out of town, so this entry is a bit off-schedule, and watering was handled by an automatic irrigation system. That said, the flowers are looking big and developing fast, with senescence in full effect. The leaves are yellowing significantly, which tells us the plants are now entering the late stage of their lifecycle. They’re basically ready for harvest any day now—depending on your individual preference. I’m going to let them ride a little longer to aim for no more than 10% clear trichomes. 🙂 --- Quick rundown on everything else: Watering: 1500ml every third day Fertilizer: According to the BioBizz schedule Light intensity: ~1000 PPFD VPD: ~1.82 kPa Temperature: ~28°C Relative humidity: ~50%

Gracias la equipo de Super Sativa Seeds Club, Marshydro y XpertNutrients sin ellos esto no seria posible 💐🍁 Lava Freeze: Con el nuevo cruce de Friesland Indica (M33 para los cultivadores de la vieja escuela) con Lava Cake, ha nacido una nueva híbrida muy sabrosa que te pega fuerte y te deja colocado. En su día, la Friesland Indica original, alias M33, alias Freezeland, se hizo inmensamente popular en América del Norte. En Canadá, se convirtió inmediatamente en una joya entre los expertos de semillas de cannabis. Fue elogiada por su productividad, su efecto y su increíble sabor. Friesland Indica era también muy robusta y capaz de soportar bien el duro clima exterior de Canadá. Esto la convirtió en una variedad recurrente para muchos cultivadores comerciales clandestinos canadienses y todavía se puede encontrar hoy en día en muchas salas de cultivo canadienses. 🚀🌻 Consigue aquí tus semillas: https://dutch-passion.com/es/semillas-de-marihuana/lava-freeze 💡FC6500: Eficiencia líder en el mercado: la lámpara de cultivo LED FC-E6500, que ostenta un estatus líder en el mercado, es una solución rentable con un PPE de 2,8 µmol/J y un rendimiento máximo de 2,5 g/vatio. Ofrece un PPF alto de 2026 umol/S y es adecuada para una cobertura de vegetación de 1,50 m x 1,50 m y una cobertura de flores de 1,20 m x 1,20 m. Iluminación versátil y uniforme. https://marshydro.eu/products/mars-hydro-fc-e-6500-730w-commercial-led-grow-light/?gad_source=1&gclid=Cj0KCQjw1qO0BhDwARIsANfnkv9IIrYSbmJqz8PqpJOIyWwJfp5bc3SGJgUV68USLQ4tjmXDYwoBuAsaAue3EALw_wcB 🚥 MarsHydro ADLITE UV/IR/RED: Para lograr un crecimiento óptimo de las plantas y maximizar los rendimientos es un arte simple que depende en gran medida de las condiciones ambientales adecuadas. Reconociendo las limitaciones de la iluminación natural y las soluciones de iluminación tradicionales para satisfacer estas necesidades únicas, lanzamos ADLITE. Estas luces especiales UV, IR y roja están diseñadas para llenar áreas del espectro, proporcionando las altas longitudes de onda que las plantas necesitan para un crecimiento y desarrollo óptimos. Consigue aqui tu Adlite: https://marshydro.eu/collections/adlite-supplemental-lights/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 🍣🍦🌴 Xpert Nutrients es una empresa especializada en la producción y comercialización de fertilizantes líquidos y tierras, que garantizan excelentes cosechas y un crecimiento activo para sus plantas durante todas las fases de cultivo. Consigue aqui tus Nutrientes: https://xpertnutrients.com/es/shop/ 📆 Semana 1 Un comienzo explosivo en solo 3 dias que llevan en floracion gracias a la nueva iluminación de mi patrocinador Marshydro, gracias al Adlite y como no a la gran gama de nutrientes de XpertNutrients. Continuo con las dosis de nutrientes recomendadas por el fabricante, esta vez el olor es penetrante y eso que todavia no tiene desarrollada las flores. En algunos ejemplares se pueden apreciar lindas preflores hembras.

Day 35 and things are moving along fantastic and all the girls are very happy.I typically wouldn’t run so many different strains in one tent but Fast Buds genetics are very versatile.I can already tell these girls will have strong,amazing buds in the upcoming weeks into Christmas 🎄😊

This has been an amazing growth once again and I got to do the compound genetics like been wanting to for a year. This stuff is so decked out

Day 127. Chop day !!!! Zkittalicious #6 is my first plant without any airy or small bud !!!! Plus he will be like others in 100g range ... #2 should beat all single plant records ;))) Happy Growing !!!

Both plants have almost stopped growing in heigth now and are in full flowering mode now. Barbarian (=AK-47 x Barbara Bud) Plant #1 is 15 cm shorter than plant #2, but a little bushier. Both have grown very well and are strong and healthy. They get more and more flower clusters now and start to fill up all branches. Trichomes start to appear all over...the plants start to get sticky and develop a weak sweet aroma now. Its time to take off the biggest fan leaves now for defoliation, I took a round of pics before and after.

Once again girl are stretching like crazy and had to be bent to avoid heat issues. Couple of branches snapped but luckily survived with some tape aid, I keep defoliating quite heavily other everyday but it's still jungle, one bigger defoliation coming on program today. I feel like the buds are forming pretty slow but that's probably because I look at them evey 2 hours haha Apart from the height issues and little bit of heat stress on the top no known issues :) Will update with some pictures tonight. thanks for checking <3