Easy germination for every strain, no stretching problems.

Once again, this week starts where the former one ended. With the exception of all the cables you can see in the first picture. I dared to install a minimalized version of the Raspi control only controlling the self-built humidifier and one blower/fan combination. I was very pleased to see how easily the simple diffusor can hold optimum VPD as long as temperatures are high and humidity tends to fall below optimum VPD. A single 10 seconds evaporation can hold the level for about 2–3 minutes. I am not pleased to see the Monsanto blowers rather underperform. It’s impossible to reduce humidity or temperature with both running on full speed, while a lifting of the tent door will bring immediate changes. With the Raspi/Arduino success so far*, I am thinking about using old Power Mac fans which are WCM controllable and use 12 V. At least one to increase air intake, and maybe even the blowers. * It wasn’t any problem at all to have the Arduino collect CO2 and soil moisture data, so after some more cable manufacturing (aka helpless soldering), I could extend the Raspi control. I’m still uncertain about the camera module (@trelorny impressed me with his time lapse videos). I don’t want to put the hardware into the tent with its not so electronics friendly climate, already risking some rare outages of the temp/hum sensor. But the camera module cannot be placed far away. So maybe I’ll use the 3A model I own as a spare part as a camera driver. Any maybe, if it works, invest in a better camera module. Mine is generation 1. Oh, and the ladies! Gave them slightly fertilised water yesterday, and even it or the better VPD yesterday or a combination of both make me believe bud growth is a bit more visible today. The smell in the morning when I open the tent to release accumulated humidity is outstanding. They were already thirsty on day 57 again, so pure RO + a bit of tap water until it spilled out of their pot’s bottoms. Many fan leaves turning autumnally now, and the smallest Sherbet suffered a bit from over-fertilisation as I wrote. But it this stage I don’t go for leaf beauty anymore. Just another learning: Don’t use differently sized pots anymore. Hard to feed them individually this way. VPD was mostly in best range yesterday, and I have the feeling it really supports their bud growth. I added an "Evening time" option to my Raspi control that allows the humidity to sink a selected time before lights shut down. That made it possible to have humidity in best range for most of the night time too. They were even dry again on day 58 morning. Another time just water. The blowers cannot cope with the flowers’ smell anymore, and so sometimes my flat cannot hide who shares it with me. Day 60 presents me with a problem: I’ll leave on Friday for a few days. Considering the microscope pictures are not from the tops buds: Would you say it’s safe to give them another week? Problem solved on day 61. Only clean water from now on, and next week will be their last. You won’t see any new pictures for some days now. Me too … Something I wanted to share with you before I leave: I just finished to update my grow box control with a new PWM fan hat that keeps the Raspi cool, while at the same an infrared sensor can now measure real leaf and additional ambient temperature. Setup is much cleaner and more robust now, but I wish my flux would not make the solder stick to the tip of the machine instead of making it flow and stick at the tiny tiny spots I have to hit …

Day 40 from seed ( 3 in flower). To sat they had a slow start these BlackBerry are surging ahead now. Only # 2 seems to be smaller now. The pale # 3 is still gaining size with no signs of stopping at all, she has a lot of sites around her that need a pin down now they are long enough to reach pot edge.

Was an easy week. More to come as i only huge it a few hours ago . Updates incoming.

Día 88 y penúltimo antes del corte. Ya se aplicó Flawless Finish para un acabado impecable como su nombre lo indica. Siempre prefiero hacer el lavado de raiz solo aplicando agua en las últimas 2 semanas, pero esta vez lo hice aplicando el finalizador y luego los últimos riegos con agua purificada. La verdad es que estoy contento con los resultados de esta nena, que es hermosa por cierto, desprende olores ácidos, cítricos, dulces. Los colores son hermosos y las flores están rebosantes de tricomas, lo que la vuelve muy vistosa. Es todo por ahora, estaré manteniendoles informados en estos últimos días. Buenos humos! 👽

Now the fun begins 😁😁🔥 Ended off the week with a bang, first week on VEG nutes still getting that Route 66, with a touch of magical & sugar daddy ! Man this girl is soooo resilient I did a little bit of lollipoping as well but it’s really not worth mentioning. 10/10 recommend meph genetics . I’m literally growing “ Charizard “ via the Reddit thread (🙈🔥) doesn’t matter what stress i put her thru she trucks on. Sucks up what ever i give her and loves the abuse. 8 h of dark every Friday 😏 Thanks for stopping by and happy growing ! 🎉🔥

Hi everyone this week whent ok I have stopped feeding for now because of a high PPM in the soil. I tested the runoff and it was over 1000 ppm . I'm not going to flush it because I will just drown them and that will have no air . They have showed no sign of being burnt and seemed to be pretty happy so just going to feed plain water with 6.5 ph . This is why I normally grow in coco perlite naw because of all of the problems . Don't get me wrong I've been growing in soil for 15 years and I have learnt to get the right recommended soil for cannabis and just feed it ph water. Mixing your own soil just ends in high PPM . Thank you for looking and will be an update next week

Today is day 36. I had to tie up some branch’s this morning. The colas have been slowly leaning in every direction, and I wanted to get them back standing straight in the light.i will flush her for a few days seems last batch of nutes burned her a little. I also believe there is to much nitrogen in her roots as some leaves have started to yellow up top. This is just my opinion from what I have been reading. I know Leaves will yellow during flowering, but from my understanding it is usually is the lower leaves. Any feed back would be appreciated.

This week my LSD-25 that I mainlined is having issues, I wasn’t too sure if it was heat stress cause tents temps have gone up to 83 the highest and hovers around high 70’s all week, or if it was a calcium issue, potassium, or nute burn. Either way they’re looking CRISPY lol. The other LSD-25 that was just LST, is actually doing quite well with none of those same problems. I flushed out the burnt plant with some regular PH’d water to see if it had any effect and then finished with some soluble gypsum. Other than that the last 2 plants are doing great and chugging along!

Last week of flowering, since couple of days we are only giving water but the last shot of ultra PK did some great work here, she swollen up and got really fat the last weeks. wonderful strain, really generous and easy to grow, vigorous and a really nice old school smell with a sweet mango like touch!

Week #18 Gelato-K By Kannabia Week #18 Mar 8th-15th Week #7 Flower This week she is packing on weight buds a swelling trichomes are still mostly clear. Thank you for stopping by!! Stay Growing!!

were getting close to harvest. lowerd light levels again, around ppfd 600 now. The Buds have an insane smell of fruity/sour sweets.

12/30/23 - Day 54 - Hello All! I started this week a day early. I wanted to update everyone on something I have been thinking about a lot. Curing. I feel if there was a hole in my growing skills it would be curing. Last grow there was more than I had anticipated. I was not set up for curing 1 lb. I threw in an audible at the last minute. It worked out but I know I can improve with some trial and error and hands-on experience. So after reading a ton, and going off of some of my prior builds for drying, I came up with this design. I have a controller that will turn the air on and will run when the contents inside the box hit whatever RH% I want to set it at. I think the first week I will set it for 78%RH, then every couple of days go down a % until I hit 62%. The thought is that if the bucket gets above the set RH% then the air will kick on and distribute air across the buds until the RH% is back down to where you want it. It will force the humidity out. I won't need to worry about burping. It will happen on its own.... in theory. Ill update tomorrow with some pictures after the water change. 12/31/23 - Day 55 - Everything is looking good. The water change completed this morning while I was in the shower. Its adding nutes now and will do so over the next hour or so. She is starting to get stinky. I had to add the extra carbon filter to the room. I've got some pics up top of that. Happy New Year! Next time I post it will be in 2024! Have a great night and be safe! Dont drink and drive, your life and anyone else involved in an accident is too important! C' YA! 1/4/24 - Day 58 - I have been thinking of trimming her for a while.... I got a comment on the bushy-ness and I got self-conscious and gave her a trim. Lol I have been going bath and forth for a while and that gave me the push to give her a little trim. She looks great and is growing really quickly. Ill update with more pics as it goes along.

A pretty uneventful week. I barely even photographed her. She's really due for a nice natural lighting photo sesh, but I really need to be in the mood for it or else the magic just isn't there. She still drinks near a gallon a day. Her leaves are super sticky. She has a nice sweet fragrance which I'm excited about! Now let's get those buds to fatten up! 🍆 💪 🍆💪🍆💪🍆

Mix amber trichomes Solit bud Nice strain Must try

They've been having a bit of trouble with calcium deficiency due to me overwatering them and not giving them CalMag every feed but have learnt my lesson for next time and will be getting the bare minimum nutrients from a recommended supplier. Been feeding them half nutrients one feed and pHd water with CalMag the other, and that's taking a day break between watering. Think they've only got this week left now then I'll start flushing with water I think, the one in the corner may need another week or 2 but at least it'll have loads of space to finish up when they're out of there 🙂 Was gonna start flushing this week but they just look so poorly so gonna have 1 more week with nutes every day cause I think they're thirsty bitches which has slowed them down possibly, full nutes, no nutes doesn't seem to be doing me any favours so I'll start flush the 2 that I think are ready next week and the last one a week after 😊😓 Have ordered a microscope to check the trichomes, no idea what to look for but I'm sure I'll see something.. feeding them everyday again as it's been another hot week should've just stuck with a daily feed probably. Will upload some trichome pics soon hopefully 😊

This week, i transplanted the girls to the final pots. I' ve just realized that autopot has 8,5l pots for my trays so I ordered some. I prefer smaller pots to my previous 15ls. So, they are in 8,5l autopots with air domes on the bottom. Around 5cm of aqua pebbles on the bottom too, prewashed and soaked in 5,8 ph water. Then coco mixed with aqua pebbles around 66:33. I watered them thoroughly with my aptus line. The lights are changed from 2 led t5's to my single 320w led bar for now. I ' let them veg for at least two weeks and we will see how it goes. Cheers!

Grow diary 11 stage 5 Days 41-50 During the week she had some training and I removed the damaged leaves. The whole grow has suffered from me not getting the watering schedule sorted. She has been in flower for about a week now, this one has stretched more then some of the other strains. Think this one will bounce back.