the seedlings germinated on September 22 in the biobizz light mix soil after 13 days I administered 1ml / lt. advanced nutrients ph perfect grow 1ml / lt. ph perfect micro 1ml / lt. 2ml / lt. b-52 2ml / lt voodoo juice after 4 days I repeated the fertilization with 1.4ml / lt of the main nutrients and 2ml / lt of b-52 after a few days I noticed some burnt tip signs of overfertilization so from day 12 I started giving demineralized water until the outflow for 3-4 times until a few days ago that I noticed a yellowing of the upper part and spots that look like calcium or potassium deficiency I was also wondering if I can do without the cal-mag since the ph perfect micro contains a lot of calcium. tomorrow I give the third dose of nutrients hoping they will recover since nothing has changed with the first two fertilizations Days 39 they do not seem mileage even after a week of fertilization even if at very low dosages the next time I increase the nutrients and let's see what happens Days 41 it looks like it's going well they still look nutrient deficient the next time we increase the dosage.

Chinazes)we are flying high in height. We don’t pour fertilizer and only drink water. communication to everyone. Work for yourself!

Flushing

Day 32: Had been using lst to get the canopy on an even level. That caused it to get pretty wide for a 2x2 tent. Started training it to grow up now since it can not get any wider. ***Update: Got a bigger tent, 4x2, doesn’t help with how wide it’s getting, but allows for a lot more room vertically, about another 1.5 feet. Also upgraded the lights and it responded rather quickly. It’s filling out and I trimmed some large lower fans leaves a couple more times to allow for air flow and new bud sites to get better light.

.

👍

She looks super heath and happy, I Supercroped her to get much more light penetracion and avoid a high height because I don't want her to be seen from the street,looks like a big green spider. Let's see how this beauty performs,she's smelling pretty strong so far,this is gonna be beautiful to watch! 💚😍🤤 Peace everybody! 💚💛❤️✌️🌱

Well growmies ive been looking forward to the Strawberry Pie, the more she went into flower the more the frost would build up , and that's when the terps came out and they came out strong , there no stealth for this girl 👉 Stinky 👈 Buds are tight and full of frost 👈 Couldn't of asked for better Genetics 😉 The smell coming from this girl during the entire grow was just dreamy 👈.... Definitely got the strawberry terps backed by this gassy flav 😍 Amazing 👉 Big thanks to all my Growmies out there in GD land 👈 Much appreciated 🙏 Thanks To MarsHydro for the TS1000 x3 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14👉 All Weeks NutriNPK Grow 28-14-14👉 Weeks 2 & 3 NutriNPK Bloom 8-20-30👉 Weeks 4 to 8 NutriNPK Bloom Booster 0-52-34👉 Weeks 4 & 9👌👌

Week 10 Flower 6 Runtz is in her last week; I started the week off 3/10 with water and feed. On her next water day, I started adding ice to the top of the pot 3/12 I added ice to the top of the pot and watered 2 ltr with PH6.7 3/13 Ice on the top of the pot 3/14 more ice and 2 ltr Ph 6.67 3/15 she was feeling light so I watered 2ltr 6.5 water. Apparently she is still drinking and many not be fully ready. Runtz is maturing almost as fast as the blue cheese gals and faster than the other strains in the tent. After flushing excess nutrients out of the soil and plant, Runtz is showing fade and nutrient usage in the upper leaves. The buds are stacking fatter and packing on more resin on the buds which are sticky and hard. The stems are strong and support the heavy buds. I used a microscope and got some good trichome shots. The trichomes are mostly milky and some clear ones remaining. Some purples show in the leaves. The older pistils are turning orange brown. Some new white hairs are still forming. Bloom Juice 90 ml Royal Rush 8 ml Power bud 8 ml Green sensation 12ml Cal Mag 20ml Recharge 5ml Ppm ranged from 259-681 Ph 6.5 -6.7 Temp 68 Your likes and comments are appreciated. Thanks for stopping by. Growers love 💚🌿 💫Natrona💫

Still waiting for the all milky tricomes

Die Ente hat sich relativ einfach gestaltet da ich nur Blätter abgeschnitten habe die kein Harz Besatz hatten. Die anderen zuckerblätter wenn sie trocken sind da es einfacher ist und sich so auch die Blüten schöner beschneiden lassen ich freue mich schon darauf. Mein erster Grow mit Divine Seeds Genetik macht Lust auf mehr!

June 8: Northern wildlife for Northern Lights diary. Great Horned Owl ( I think) as shot on old iPhone from grow area. There for about 20 minutes not moving, just swivelling his head around looking for a meal.

I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"

Day 52 - before pic/vid pulled em both out scrubbed tanks..... moved em into a different tent, with a different light.... did up completely different solutions, and currently still building it all.... Day 53 - still buildin... vids of new home... Nutrifield, Rock Nitro, 1200-1500 ppm and 6.5 PH.... see if we can give em a good boost.... left em in pure water before puttin em in new solution.... Day 57 - pics vid.... been adjusting ph... down to 5.8.... they are just growin along nicely in the new home... got a fan for the tent... looks good tho... solution temp is abit high, fan will fix that..... changed just the tanks to 5lt Cereal containers, they are alot taller, more room below the container... fits perfect.... Day 59 - pics vids, , 6.2ph, 1300ppm ... water temps been getting abit high, fans should arrive next week.... 👍😎 120W Aluminum+PC Plug 2835SMD 7995-9594LM 1131Pcs Red+234Pcs Blue * Blue(wavelength: 430nm, 554nm * Red(wavelength: 630nm 660nm)

5.07 Clones rooted 0,3 l pots and waiting under weak light around 200 ppfd

I added a few bamboo stakes in each pot and wrapped some garden wire around them to support the branches. The flowers are starting to get a little heavier now and some of the branches will need some support. Everything got a good feeding a couple days ago and have responded well. One of the plants got burnt by the light for a couple of days, killing a few of the top fan leaves. The top flowers on that plant are a little more fluffy than the other plants, but it has been moved to a cooler spot in the tent now.

awesome strain would 100% recommend.... still got a plat and a half to chop

Week 1 of flush