Ya se empieza a ver la recuperación foliar luego del desguace hace unos días. Esta semana toca DELTA 10, Melaza con Guano de murcielago (luego de reposar 1 día) y también vamos incorporar por primera vez MONSTER BLOOM DE GROTEK. Veremos como avanzan en estas semanas claves que se vienen :D Día 25 fue incorporado 1cc de MONSTER BLOOM DE GROTEK en 5 Litros de agua. Pd: Cambie el lugar donde estaba la carpa. Mucho frío afuera al costado de casa, ahora esta más protegida con mejor temperatura noctura sobre todo :D

Just finishing up and ripening

This new LED’s from futur vert is the best of the best !! Worth every penny

We started to change color! Thats amazing guys! This is my first purple flower! Cant wait to check it out. Look on photos! What do you think about defoliation or banding? Wanted to leave it with our any trainings, but now Im not sure...

Hello Diary. The second week of flowering is behind us. I did a little defoliation this week, I honestly didn’t dare remove more leaves and branches, I didn’t know how they would react to it. Maybe I needed more? The temperature is still high, sometimes rising to 29, 30 degrees, but mostly around 28. Humidity in the air is an average of about 55% but sometimes rises to 60%. The problem is frequent rains this summer which creates high humidity in the air and this affects the humidity in the box as well. The flowers are developing nicely, and they have started to smell as well, but let the pictures speak for themselves. The plants are big for my conditions, the 120 x 60 box size is perhaps too small for three plants (two Hulkberries and one Green Gelato), so the real jungle is in the box. It’s already a challenge to take them out every week for a photo shoot, but I try to be as careful with them as possible. The Hulkberry has reached a height of 113 cm which is on the verge of acceptability. If it continues another ten cm, I’ll be in trouble because the lights can’t lift more than this. 18/07/2020. - Day 30. Defoliation. I removed the leaves at the very bottom of the plant to make it easier for me to water them, after that I watered the plants but this time I didn’t put BioBizz, I just watered them with clean water. 21/07/2020. - Day 33. Watering. This time I gave them BioBizz, on schedule for the second week of flowering. I also added CalMag 1.5ml / L, preventively. While they don’t show they’re missing anything, I’ll keep adding CalMag. 23/07/2020. - Day 35. Photography and height measurement. Hulkberry Auto # 1 - Day 35. - 97cm Hulkberry Auto # 2 - Day 35. - 113cm That’s all for this week, see you soon.

This was a fun project that was a few years in the making and a year later to see if they would last a season for this upload to happen. Before any of this I would bike aorund town grabbing up all the old Ikea solid pine bed slats that I could find and storing them in the basement. I have a lot of wood down there, any size worked as long as I have enough of them. The hot days to find them were the first and last of the months because that's when people where moving in/out. I also kept an eye on the free section on local online classifieds as well. The entire purpose of this was to recycle as much off the streets as I could before buying anything to finalize the project. In the end I only bought sealer, screws and some takeaway/beers. All the wood was 100% free and salvaged off the streets of Toronto saving it from the dumpster bin. After collecting all the slats for about 2 years I was playing aorund with them on how I wanted to make this work. I had previously done a little project like this before but I messed it up and the boxes where crap. did not last longer then 2 seasons, they where thin and shallow as well could not grow much of anything in them. I Was talking to my friend who is renovating their house and we brainstormed some ideas on the boxes, I found some designs I liked online and said lets make something like this out of what I have here. We tossed out a few of the design features when looking at them as it would have been wasted wood and extra work not needed. If I had more wood them maybe it could have been an option but simple was the name of the game. They taught me what I needed to know like how the miter saw and sander worked, plus all the other tools I was using. They did help out with a table saw and creating the triangle support joints in the corners, They used some pine left overs they had while making a staircase indoors. I did not feel up to the task of using a table saw given all the relatives I know who have lost a finger to them. In the end we decided the design would be three boards high and take an alternating pattern on corners. layer one short, layer 2 long, layer 3 short. Went with a galvanized and painted deck screw so it can take the weathering. Ran into some problems like making everything level as some of the boards were warped and other ones had undesired aspects like knots and tacky sticker goo I could not remove. So I used them for the base that will not been seen so much. Clamped everything down and called it a day. Once it was all done and over with, I then brought them back home from my buddies work garage and started to seal them. I went with a boiled linseed oil as its a food safe option should the wood degrade into the soil I will plant in them. I will need to reapply it to the boxes year after year but the main coat is the most important one and I put it on 3 layers with a good dry in between coats. the inside of the boxes that where coated did not degrade at all as the sun did not hit them so it will not need a new coat just the outside. Overall the end result was very impressive for myself, I've never taken a woodworking class ever and It was a near perfect outcome for me. Heavy Duty Planter Boxes for all my gardening needs. I made a last min decision to add in a plastic liner to preserve the wood even longer and stapled that into the frame. it has held up quite well and may need replacing end of 2nd or 3rd year out in the sun. Used a thick moisture wrap plastic with UV protectors in its formula. Lets see what I can grow in them this year! m0use's haus of projects - garden box edition

As u can see trichomes slowly turning milky even amber so starting to flush with ripenner then r/o some Buds might catch alight foxtail i’m trying to maintain air circulation there as hard as i can to prevent rot cuz buds aregetting rly dance

~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ ❤️💡🌱😽💨 It's been a good week! We're really hurting for calmag but we just placed another order, we hope it arrives before their color slides anymore.. all plants were overfed about 1.5 weeks ago (I blame my husband lol), they are still really dark in places with some clawing but are starting to bounce back.. the node spacing is fantastic, the Solux350 @75% is a ton of light, we raised another few inches until we get some more calmag in them..not too much else to report, thanks for dropping by and happy harvests everyone!! ❤️🌱💡 ⚡Hortibloom/Solux 350⚡ Specifications ⚙️: Diodes: Samsung LM281 Pro / Osram DR (1,440 total)💡 Driver: Inventronics 350 watt🔌 PPF: 1015 μmol/s ☢️ PPE: 2.9 µmol/j 〰️〰️ Lifespan: 50k+ hrs ⌛ Weight: 14.3lbs lbs (6.5kg) Veg Coverage: 5 x 5 ft 🌱 Flowering Coverage: 4 x 4 ft 🌼 -Uses an aluminum heatsink (no fan), quiet while operating 👂⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 -May be daisy-chained via RJ14 and managed from a single controller 💡~💡~💡~💡~💡 🌎 https://hortibloom.com/products/solux-350-led-grow-light ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_

Divided into two boxes 14 in 1x1 20 in 120x120

Holy Lst. Getting crazy now for just a few weeks from seed. No stopping it now.

As you'll read below one of these was tossed, the better looking one in fact so only 1 remains right now. Hopefully this one doesnt turn too. Aight so the other day I found another hermie in the very early stages. So I emptied the tent and sat in there in the pitch black for 15 minutes to let my eyes adjust looking for anywhere light could get in. Because I have 2 veg tents in the same room on 19 hr schedules it's impossible for me to have the room the tent is in be pitch black. There was no leaks in the fabric but the air vents at the bottom, even tho I only have 3 open a little bit, let in the slightest amount of light. I had to toss out a mandarin cookies R1V2, a bwiz x Rocberry and a gushers. I found a male flower on a Hawaiian snow x wc x g33 on a lower but instead of tossing it I removed all the lowers and am going to check daily to see if its aight or not. I ordered a ac infinity 4 inch fan, some light proof ducting and a intake carbon filter to be able to set up a intake and close the vents. Very little pollen may have dropped which could seed everything but I might have found it just in time we will see. I almost retired on the spot but I'll give the intake fan a shot as a last ditch effort. Otherwise I would have to remove the veg tents or have intake fans and no open vents for all tents. Use the code bangdang for 10% the following sponsors.. @greenbuzzliquids @rainscience_growbags @gorilla_grow_tent @growlightscience.led

25/8 Start of week 4 from seed I believe, plant 1, being fed 'Easy Boost Organic Combo' has the dry mix stuff in the Coco, added the 'part 2' tablet ended up mixing with 4L of water, says it lasts a week mixed up so I gave her about 0.5L today as she was really dried out. Plant 2, being fed 'Canna' colour seems to be getting better, I'm going to continue giving her canna CalMag & Rhizotonic' until she looks like she wants a bit more. All going well though, both plants are still alive after their topping! 🤞🌱💚 Man I need a bong now 🔥💚 26/8 both plants recovering well after being topped. Not been watered or fed since yesterday, will wait until they are drier. Plant 1 is going to be a lot more short and bushy by the looks of it (which is what I need in grow space). 27/8 plant 1 recovered a little faster, shed almost picture perfect, happy 1 plant 1 though. No feed or water again today 28/8 think I seriously overwatered plant 1 😂🙈 live and learn. Going to let her rest for a couple more days. plant 2 doing really well, unwilling start LST soon and possibly top a couple of sites early next week 29/8 plant 2 is taking off again, I've started LST on both of them. #1 is not as developed, I removed a few leaves off her today as they were preventing proper airflow. Plant 2 has been fed for the first time in a while, plant 1 has had a tiny bit of water 30/8 had every intention of transplanting both girls, however I only had enough coco for 1. Decided to transplant #2 in to 7Gal fabric pots as she is the most developed. Both have roots starting to push through the bottom of the old pots, may have left it a couple of days too long. 31/8 Coco coir never arrived for plant 1 so I'm hoping it come tomorrow. Plant 2 has been topped quite a few times today letting her rest now. Not sure what plant 1 is doing it could me getting root bound? Gave plant 2 some calmag water, nothing for plant 1

Hi guys, What's up? Welcome back to Queen Peaky's Flower Gardens Here we are! Our little girls have just begun to open their buds to bloom in the best possible way! Happy blooming everyone guys 😉🌱🎊

I lost a ton of leaves on the NL after a cal mag deficiency that I wasn’t able to correct. But it’s still budding. The ICE is thickening up slowly but surely.

*Increaded PPM to 650 *Last plant showed sex it’s s Female. Looked like a male almost chopped it. *We Can say we got a 60% female return. *These are ready to flower but need to take clones first.

No co k tomu dodat těším se na to přátelé.

These lady's have real good except error on my part with one that ended up herming out but got it out tent before it could do anything but rest have since to gotten way better and are filling out nicely and my mania she still the best looking ggxww I got initially got about a week left before the ready to be chopped down have been flushing for almost two weeks ph has been at 6.5

Day 101, been cutting off fan leaves on lower nodes, adding ice cubes and spraying cold water on buds. Expecting about 5 more weeks till harvest but I don’t know just guessing Also I don’t know how to change the question so I’m gonna put it here, has anyone tried to defoliate some smaller colas then tie them together will that be beneficial for bigger bud(promote one another) or is it better to leave oxygen to pass through, thanks

Esta semana fue solamente de flush 🚿 en esta ocasión decidí usar florakleen para ver con cual obtengo mejor resultado si con este o con flawless finish, lo hice así, primero hice un lavado con pura agua con ph de 6.2 lo hice desde el ultimo día de la semana anterior, fue lavado doble, uno en cuanto se encendio la luz y otro justo antes de apagarse, luego empezando esta semana regué dos dias usando el florakleen y ph de 6.2, el tercer día no regué y al final de ese día le di corte ✂️ y la colgué, actualmente ya la tengo curando, la tuve 10 días secándose con una humedad de entre 50 y 60% para un secado lento.