The Grow Awards 2026 🏆
Likes
Comments
Share
The outcome of the flowering was very surprising. Flowers pumped up the last 2 weeks, became hard without leaves inside the buds, developing an amazing rancid and musky smell . During the vegetative phase; the plant grew vertically with pretty good ramifications..I did a topping very late, just before flowering like in emergency to stop the stretch: the plant was a little bit shocked but never stopped growing with a big internode’s distance. The opérations finally gave a good result: forming and developing more blooming sites. But the whole stability of the structure was changed and the plant was bending dangerously till the harvest.
Processing
Likes
21
Share
Hello, friends, I Welcome you again from Russia. Comes week 5 photoperiod Bubblelicious. I planned to make clones of this plant, but unfortunately the whole place is occupied by other projects, and temporarily I have to give up this idea, but I will continue to grow this plant, later on, I still make clones, and while I tear off the vegetative leaves and give free growth.
Likes
23
Share
hello guys this week I applied lollipopping to the two girls who are getting really huge the skunk responded to the pruning in a masterful way while the honey cream tends to keep its tip firm the ak420s are growing a lot while the sc girls. they reported very strong sun stress freak shows grow slow and so far the only plants I get along with are frisian ducks.
Likes
26
Share
Ok my dear fellows. I've upgraded my tent in a 1m X 2m. With this setup and a high potent dehumidifier I should be able to keep the humidity low. Unfortunately this high humidity was going too kill two other crops. With this setup I should reduce that risk again. So the RHC is now together with the others. She is bulking a lot. There have been a little discoloration on the upper leaves. It might have been the light too strong. This is weird because I'm providing 1500 ppm CO2. All the other parameters are ok so it must have been a little lack of water some days ago. Smell starts to be very noticeable BUT it doesn't reminds me weed but instead citronella. I thought that's why I don't see mosquitos in the room. To the next week *Changed nutrients ratio to meet to lower the EC but keeping PK at the level of (40ppm - 100 ppm). *Next upgrade will be a tower fan to increase the airflow
Likes
17
Share
@Skipi007
Follow
The second week of flowering, last bigger cut, I accidentally broke one of the smaller top ones 😔😤, the girl is doing well 👍 Day 63: the eighth week went without major changes, the girl shows no shortcomings and grows nicely.
Likes
35
Share
@DevilsBud
Follow
Start of week 6 The hedgehog on the 2 sins are insane and now it's time to pump ul the volume everything going great and the smell is very unique visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter
Likes
22
Share
12/25/2023-Germination Day 1 Merry X-mas 2023 I decided to start a run of SolFIre Gardens Hoodz Candyz S1. I am going to do a cup filled with RO water a touch of Hydrogen peroxide and let it sit for 24-48 hours until I see tap root then I am going to put it into a rapid rooter.. Tap root Down and put it about 1/4 of the say down the Rapid rooter. I made some modifications to my basket on this run.. I have taken a few Pods that I use for my cloning machine and decided that I am going to try and use them as sure plants, so that I can take my water right up to the bottom of the basket this time and see if these can make my planting more consistent.   12/26/2023-Germination Day 2 Tap root achieved Planting Commencing 12/27/2023-Germination Day 3 Misted the dome lightly misted the rapid rooter and added a little water to the bottom of the pan to encourage root growth to the pan. 12/28/2023-Germination Day 4 Ground Hogs day 12/29/2023- Germination Day 5 She is up, she has broken surface, I misted the root riot, and around the bottom of the tray to try and entice root growth down rapidly. 12/31/2023- Germination Day 6 Ground Hogs Day 1/1/2024-Germination Day 7 HAPPY NEW YEARS!!.. I did it I planned it out so my planting day would fall on New Years and it worked.. Yay!!! 1/2/2024- Germination Day 8 Since the roots are not to the water yet, I am pouring one cup of water lightly on the hydroton around the lady to try and encourage root growth down to the water.. 1/3/2024- Germination Day 9 Ground Hogs day, will continue until roots hit the water. 1/4/2024- Germination Day 10 Ground Hogs day, will continue until roots hit the water. I will just continue to top feed until roots are in the water.. Shouldn't be more than a few more days. 1/5/2024- Germination Day 11 Ground Hogs day, will continue until roots hit the water. I am going to change the water Sunday and kick off Week 1, I will just continue to top feed until roots are in the water.. Shouldn't be more than a few more days. 1/6/2024- Germination Day 12 Ground Hogs day, will continue until roots hit the water. I will just continue to top feed until roots are in the water.. Shouldn't be more than a few more days. 1/6/2024- Germination Day 13 Ground Hogs day, will continue until roots hit the water. 1/7/2024- Germination Day 14 Ground Hogs day, will continue until roots hit the water.
Likes
6
Share
Day 71-1/10/22 gonna flush these babies one more time!!!!
Likes
6
Share
@MrGoonai
Follow
10/27/2025 - Day 63 Short Facts: - 45cm tall - VPD @ 1.2 - Light @ 60% - Showing very small flowers ----------------------------------------------------- It doesn’t look like there’s going to be a big stretch. She’s staying smaller and more compact than the Papayton. I defoliated her a little bit and tried to remove a few of the very small branches, but she’s just too compact, so it wasn’t that easy. I decided to stop for now. She grows as she grows. 😎 I can’t change much about it, so I’ll just let her do her thing. Honestly, apart from being smaller and very compact, there are zero problems. Everything else is perfectly fine. Nothing more to report this week, except that I decided not to switch the normal Blumats to the Blumat Maxi anymore. Instead, I’m watering from the bottom occasionally whenever the Blumat Digital Pro shows a high value, meaning the soil moisture is getting too low.
Likes
11
Share
Likes
4
Share
Great nose and terps. Cookies beats out Humboldt in quality. Yield was very low but that could have been growers error
Likes
69
Share
@ClubRiot
Follow
Kalini Asia by Zamnesia Seeds Week 15 11L Pot LED: SP250 (245W) for Flow. Stage Canna COCO Mineral Nutrients: 👇 Flawless Finish: 2 ml/L
Likes
Comments
Share
Likes
92
Share
Week 5 Veg Report: SCROG Netting, Massive Leafs & Precise Data Mastery! 🌱 Girls Growing Stronger Than Ever! 🌱 This week has been truly epic in the grow room—so much so that it’s time to bring in the SCROG net! With the canopy expanding and the younger ones still working to catch up, the SCROG net will help me achieve that perfect, even canopy. A well-placed SCROG not only ensures better light penetration but also gives the smaller plants a chance to spread out and thrive alongside their bigger sisters. Now, let’s dive deep into the SCROG method. The Screen of Green (SCROG) technique is a grower’s secret weapon for maximizing space, light efficiency, and yields. The concept is simple but powerful—train the plants to grow horizontally along the net, forcing them to expose multiple budding sites instead of just a single cola. This way, the canopy spreads evenly, improving light distribution and air circulation throughout the tent. As the plants grow, I’ll gently weave their branches through the screen, ensuring they fill every square inch of space. The end goal? A sea of buds all basking in equal light! 💪 Huge Leafs Everywhere! 🌿 One thing that’s really catching my eye this week is the size of the leaves—they’re HUGE! Honestly, they’re so big I couldn’t resist a little fun, so I made myself some fashion accessories: leaf earrings and a cap from the Super Sativa Seed Club Green Papaya! 😂 And, of course, I captured the moment. But seriously, large leaves at this stage are a great sign of healthy, robust plants. These “solar panels” are hard at work soaking up all the light, driving photosynthesis, and fueling growth. So, what does it mean when your plants are showing off big, luscious leaves? It’s a clear indication that they’re happy, healthy, and thriving in their environment—big leaves mean lots of energy being produced and stored for future bud growth. Exactly what we want! 💧 Precision Feeding with Aptus Nutrients 💧 This week, I took a deep dive into my Aptus nutrient lineup and shared a video explaining how each product affects the water’s pH and TDS. Using the AMP-3 Precision Meter, I’m getting real-time water readings and keeping everything dialed in perfectly. Let’s break it down: • pH: 5.83 • TDS in solution: 445 ppm • Water temperature: 25.2°C The Aptus products are incredible for balancing nutrients without throwing off the pH or TDS too much. I’m fine-tuning my feedings based on these readings to make sure the girls are getting exactly what they need. The precision I’m able to achieve with the AMP-3 is mind-blowing—I get immediate feedback on pH, temperature, and EC, allowing me to make real-time adjustments and ensure the perfect environment for nutrient uptake. 📊 Environmental Mastery Thanks to TrolMaster 📊 Speaking of control—let’s talk about the TrolMaster system! Between the DSH-2U Humidity Station and all the other sensors, I’ve created the perfect environment for my plants. Here’s where we’re at this week: • Temperature: 26.2°C • RH: 70.6% • CO2 levels: 775 ppm • VPD: 1.0 kPa • PPFD: 423 Thanks to TrolMaster, I can monitor and adjust these metrics in real time, and the best part? I can do it all through the TM+ Pro app, even while I’m lounging in my green papaya leaf hat! 😆 Whether I’m checking the CO2 levels, adjusting the lights, or fine-tuning the humidity, it’s all in my hands with just a tap of my phone. Talk about convenience! 🌱 P.S. – Inline Sensors: Heavy-Duty Precision 🌱 Now, let’s talk about the heavy-duty players in this game—the (PCT-2) Heavy Duty Inline EC/Temp Sensor and the (PPH-2) Heavy Duty Inline pH Sensor. These bad boys are connected directly to the AMP-3 Precision Meter, and they’ve been absolutely crucial in giving me the most accurate readings on my water and nutrient solution. The PCT-2 keeps me informed about the electrical conductivity and temperature of my solution, which is key for monitoring how well my plants are absorbing nutrients. Too high or too low, and we’re asking for trouble, but this sensor ensures I’m always in that perfect range. The PPH-2, on the other hand, is all about maintaining the perfect pH balance. A fluctuating pH can mean nutrient lockout or deficiencies, but thanks to this sensor, I get a constant read on my pH levels, so the plants are always in their sweet spot for optimal nutrient absorption. Together, these inline sensors allow me to run a super-tight ship—every drop of water and nutrient is dialed in to perfection, keeping the plants happy and healthy! Shout Outs! As always, huge thanks to TrolMaster and ThinkGrow LED for the amazing gear, to Aptus Holland for their top-notch nutrients and Pro-Mix for the best soil i have used so far. Big love to the seed banks, the amazing Grow Diaries community, and all my followers—you guys make this journey so much more exciting. Don’t forget to catch up on my social media, Instagram, and YouTube for real-time updates and exclusive content! Stay tuned for more—next week is going to be epic! DogDoctorOfficial Discount Codes so you can save big on your next check out 💚💚💚 Kannabia - DOGDOCTOR 30% off SeedsmanSeeds - DOGDOCTOR 10% off CannaKan- DOGDOCTOR 15% off terpyz.eu - DOCTOR 15% off The Neutralizer - PORKIT5-DOG 15% off Growers Love to you all 💚💚💚
Likes
6
Share
🌸 Week 6 Flower – RollerCoaster Haze 🌸 The RollerCoaster Haze ladies continue to impress, towering, branching, and now fully focused on flower production. At this stage, the stretch has slowed down and the energy is clearly moving into bud development. Both phenos are responding exactly as expected: stacking, swelling, and pushing out white pistils everywhere. 📸 Media Update This week we worked mostly with video content, editing clips to show different angles of the canopy, along with a handful of carefully edited photos. I also tested the GoPro inside the tent. While it captures the energy of the grow, the challenge remains: grow lights and reflective walls can be tricky for sensors. It’s part of the experimentation, learning what tools work best for documenting the journey. 🌱 Plant Development • Flowers: Buds are bulking up, calyxes swelling, and pistils standing tall and abundant. • Colas: Long, thick colas are forming, showing that the plants are putting their full effort into bloom. • Health: Leaves remain vibrant and healthy, a great sign that the nutrition plan is balanced. • Size: The girls are still ginormous, filling the tent with their structure and presence. 💧 Feeding & Environment The recipe continues as in Week 5 with the Aptus + Plagron combo, fine-tuned to deliver exactly what they need in mid-flower. The soil’s foundation combined with targeted liquids creates harmony between root uptake and flower demands. • pH: ~6.0 • EC: Moderate, adjusted to soil reserves • Temps: ~28–29°C • Humidity: ~65% • VPD: ~1.3–1.4 The girls show no stress signs, just steady flower development and consistent stacking. 🔬 Educational Spotlight: What Happens in Week 6 Flower? By Week 6, the plants are deep into reproductive growth. Here’s what to expect and observe: • Bud Bulking: Calyxes swell, flowers add weight, and colas begin to take their final shape. • Pistil Production: White hairs remain abundant, showing active flower growth. Some pistils may begin to slightly darken or curl in certain spot, a natural step in maturation. • Trichome Formation: Resin heads start to appear and multiply, laying the foundation for terpenes and cannabinoids. • Nutrient Focus: Plants now require a steady supply of phosphorus and potassium to fuel flower production, while still needing calcium and magnesium for structural support. This is also a week for observation. Every genetic expresses differently, some push pistils longer, others start swelling earlier, some stretch more, others pack tighter. It’s a reminder that growing is about watching, adapting, and learning from each cycle. 🌟 Looking Ahead • Expect even more bulking in the next two weeks, as the flowers really start to pack density. • Trichome coverage will increase noticeably, and aromas will begin to intensify. • Environmental control becomes crucial — high humidity can risk mold at this stage, so keeping air moving is key. ✨ Reflection Week 6 Flower is where the RollerCoaster Haze girls show their true potential. The canopy is vibrant, the flowers are swelling, and every sign points toward a powerful finish. This is the heart of the ride — and these plants are carrying us higher with every day. 🌸 Week 6 Flower – Summary 🌸 • Development: Buds bulking up, calyxes swelling, long colas forming, abundant white pistils. • Health: Vibrant leaves, strong root base, plants remain ginormous and thriving. • Feeding: Aptus + Plagron combo (no All-in-One Liquid), balanced P/K support, steady Ca/Mg. • Environment: • pH: ~6.0 • EC: Moderate, adjusted to soil reserves • Temp: ~28–29°C • RH: ~65% • VPD: ~1.3–1.4 • Notes: GoPro testing for photos/videos; documenting challenges with tent lighting. • Focus: Observation of pistil production, trichome development, and bud stacking. • Looking Ahead: Expect flowers to pack on more density and trichomes in the coming weeks. 📲 Don’t forget to Subscribe and follow me on Instagram and YouTube @DogDoctorOfficial for exclusive content, real-time updates, and behind-the-scenes magic. We’ve got so much more coming, including transplanting and all the amazing techniques that go along with it. You won’t want to miss it. • GrowDiaries Journal: https://growdiaries.com/grower/dogdoctorofficial • Instagram: https://www.instagram.com/dogdoctorofficial/ • YouTube: https://www.youtube.com/@dogdoctorofficial ⸻ Explore the Gear that Powers My Grow If you’re curious about the tech I’m using, check out these links: • Genetics, gear, nutrients, and more – Zamnesia: https://www.zamnesia.com/ • Environmental control & automation – TrolMaster: https://www.trolmaster.eu/ • Advanced LED lighting – Future of Grow: https://www.futureofgrow.com/ • Root and growth nutrition – Aptus Holland: https://aptus-holland.com/ • Nutrient systems & boosters – Plagron: https://plagron.com/en/ • Soil & substrate excellence – PRO-MIX BX: https://www.pthorticulture.com/en-us/products/pro-mix-bx-mycorrhizae • Curing and storage – Grove Bags: https://grovebags.com/ ⸻ We’ve got much more coming as we move through the grow cycles. Trust me, you won’t want to miss the next steps, let’s push the boundaries of indoor horticulture together! As always, this is shared for educational purposes, aiming to spread understanding and appreciation for this plant. Let’s celebrate it responsibly and continue to learn and grow together. With true love comes happiness. Always believe in yourself, and always do things expecting nothing and with an open heart. Be a giver, and the universe will give back in ways you could never imagine. 💚 Growers love to all
Likes
4
Share
@kokkin666
Follow
Nous sommes maintenant en fin de stretch début de floraison. J’ai fais une petite erreur d’arrosage pas assez arrosé les plantes j’ai récupéré ça aujourd’hui 👍 Sinon tout vas bien premier engraissage avec terra bloom de plagron. L’odeur est super forte mais qu’est-ce que j’aime ça 😍🙏
Likes
Comments
Share
Welcome to Veg Week 2 of Divine Seeds Auto White Widow I'm excited to share my grow journey with you all as part of the Divine Seeds Autoflowering Competition 2025. It's going to be an incredible ride, full of learning, growing, and connecting with fellow growers from all around the world! For this competition, I’ve chosen the Feminized Automatic strain: Auto White Widow Here’s what I’m working with: • 🌱 Tent: 120x60x80 • 🧑‍🌾 Breeder Company: Divine Seeds • 💧 Humidity Range: 50 • ⏳ Flowering Time: 58 Days • Strain Info: 20%THC • 🌡️ Temperature: 26 • 🍵 Pot Size: 0.5l • Nutrient Brand: Narcos • ⚡ Lights : 200W x 2 A huge thank you to Divine Seeds for allowing me to be a part of this amazing competition and Sponsoring the Strains. Big thanks for supporting the grower community worldwide! Your genetics and passion speak for themselves! I would truly appreciate every bit of feedback, help, questions, or discussions – and of course, your likes and interactions mean the world to me as I try to stand out in this exciting competition! Let’s grow together – and don’t forget to stop by again to see the latest updates! Happy growing! Stay lifted and stay curious! Peace & Buds!
Likes
154
Share
@FAST_BUDS, Hi all the happy people here in GrowDiaries. This is the new release of Fastbuds first CBD strain. https://2fast4buds.com/seeds/cbd-crack CBD Crack is a superchill euphoric hazer and medical marvel, rapidly becoming our anytime favorite. Perfect for wake & bakes, this autoflower strain guarantees a mellow, positive and focused high. Crack CBD is FastBuds' latest medicinal wonderbreed, delivering a rock-solid 6% CBD index. These distinguished, colorful plants autoflower beautifully in pine tree style. Lovely purpling and abundant frost adorn quality buds from top to bottom, with harvests of up to 250g per plant within 75 days of seeding. TASTE & AROMA Its distinctive flavor combines rustic and pungent tones with hints of citrus and cinnamon. THE HIGH EFFECT Contrasting robust CBD with lower THC, this bud induces a delightfully soothing, uplifting, low-anxiety effect which allows brain and body to function, while instantly easing symptoms and struggles. HOW IT GROWS CBD Crack boasts vigorous early growth, with full blooming around week 5-6, good frosting with a nice scent by week 8, and flowering in week 10 or 11. Ponytail her to get the side branches out & up and form some nice colas. Try 500ml of feed every other day, from day 14-17 up to week 4, and increasing as required thereafter. 70cm is a good height to reach, resulting in around 120 grams of bud weight. We recommend a bit of Low Stress Training to improve light penetration, and experimentation with light defoliation. ----------------------------------------------------------------------------- 2017-10-09. Week 8 starts and the girls are at day 55 from germination. The nr 1 is 61 cm high and stacking up in the budsites and smells sweet, blueberry/rasberry and nettles. Nr 2 is 39 cm high and smell sweet, lemon, berry, nettels and mint. One of them have som nuteburn in the tips and the second one i burnt the top on the hps lamp when i was replacing it in the room. They drink about 3 liters every day and are frosty and sticky. This is a awesome girl to grow this far and they look and smell beautiful. What i have seen here in GD, this strain is harvested between week 9-11 so its getting closer.
Likes
10
Share
Let her flush for 12 days and cut her down yesterday. Next update when shes dried, trimmed, and weighed.
Likes
7
Share
Strong smell starting to come off this fine lady. She slowed down growth before going in to flower but seems to be bouncing back the lemon skunks and tranquil have surpassed this fine indca in height