Likes
Comments
Share
@jojopfoh
Follow
Such a beautiful and bushy lady. Lots of buds and wonderful stacking on the buds So sticky and frosty. The buds are solid
Likes
3
Share
@Radagast_
Follow
12.08. Sour Diesel Day 72# Day Flowering 55# 06.08. SD2# harvested,trimmed,dried and almost smoked lol The caterpillar destroyed it and I had to take it off so that everything wouldn't go to waste. 10.08. 5 more plants were harvested,trimmed and left to dry, all mature, some more, some less, but I didn't want to risk any more so that the caterpillars wouldn't destroy them, one of these 5 had already started. 2 plants left on site, need 7+ more days. The day before yesterday was the end of their 10th week. Stay High and Keep Growing!!!
Likes
6
Share
Flowering days 27 since time change to 12 / 12 h Hey guys :-) The ladies look beautiful and are growing very well. The sweet smell starts to blow through the whole tent :-) . This week it was watered 3 times with 1l each (nutrients see table above) Nothing else happened this week. Everything has been checked and verified. A lot fun and stay healthy 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Strain at https://pcg.international/shop/pcg-int/ Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.5 MadeInGermany
Processing
Likes
21
Share
Defoliated some leaves to let light in, chopped one down early as I run out of bud 🙄 it's good for less than 4 weeks flowering. Have them rice water starch again this week in with there food. A layer of frost is slowly forming 😎 hopefully they will fatten up nice and frost up really good to 🤞
Likes
6
Share
@zenderman
Follow
30/4/26.day 71 from germ,today flushed with "flawless finish".
Processing
Likes
9
Share
This girl looks waaaaay better than the last blue toof I grew. Gave her a tea yesterday and she is loving life. Decided not to top her so I'm hoping she produces a little bit of weight.
Likes
30
Share
Last 2 weeks was good, but buds gettin not as big as i thought. But i think, 7 to 10 days to go, could be get bigger. Have nice week everyone✌️
Likes
567
Share
MY SAYING NOW IS: THE ONLY WAY TO GROW IS WITH THE HYDRO🤘 AND REACH FOR THE STARS WITH MARS🤘🤣. https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA So it's been 17 days under the new MARS HYDRO FC4800 and the TSW2000 and the girls are loving it.. leaves were straight up like they were at a rock concert just blowing in the wind waving their arms like they are in the moshpit🤣🤣 looked so sweet👍. after a day they have stretched so much I had to raise the light already to keep it at 14 inches above the canopy. Plants grow so uniform under these lights, canopy is always nice and even👍. it has a whiter light than the mars tsw2000. Being side by side in my 8x8 tent, I can really see the difference in the color of light. The FC4800 is more of a white light like natural light. Its the NEW blue uv Diodes they added to the fc series lights. I'm amazed at how good this light is already. Barely any heat comes off it. I can rest my hand on it when the dimmer is at 100% and it's just warm. I have it daisy chained to my TSW2000 and it works awesome👍 and I dont have to reach for the other dimmer to do both. One dimmer controls both lights. When I add more lights I will daisy chain them too and control 4 lights from 1 dimmer👍. I still love my tsw2000. It's been going almost non stop since I got it and no issues at all. I take a picture of the Diodes to see if any have burnt out or anything, everything is fine.  same thing with the heat it gives off is just like the FC4800. I can rest my hand on it without burning me👍. Having both lights on 100% because I'm in flower now, only raises my temperature about 3°celcius. Make sure you got some calmag and if you use reverse osmosis water (bottled water) or filtered water you will want extra calmag because it's filtered out of it👍. I CANT BELIEVE the amount of crystals the plants have already🤘 they just started getting bigger hair clumps and I didn't expect to see this much already👍 awesome lights do an awesome job. So it's looking good for these strains I made👍. These lights are perfect for every stage of growth for germination to flower. Just use the dimmers to reduce the intensity of the lights for whatever stage you are in. Plus they are easy to raise and lower them with the ratchet straps. MARS HYDRO'S recommended height for different stages is pretty accurate but different strains like different Temps and light sensitivity so that's something to look into, a more Mediterranean strain can take more heat and intense lighting. and you can just follow their recommendations for the height for each stage. I slowly turn it up in the later veg cycle until I'm at 75% about a week before I switch to 12/12 and after about 4 or 5 days into flower I'm at 100% with no heat or light stress👍. Mars hydro is awesome for their pricing for what you get👍. They should cost alot more than other brands but shhhhh don't tell them🤣🤣🤣🤣. Just kidding. they want to stay competitive with every brand but there stuff is always cheaper than SF and vipar etc. They know once you use mars hydro products you won't switch to another brand. Why pay more money for something that isn't as good. I've seen lights cheaper than mars but they are cheaper for a reason. They are built cheaper. My TSW2000 is fairly heavy too. But when it comes to getting lights you want some weight to it so you know it's built strong and sturdy and will last a long time.. I called customer service a few times and they will help you out with any questions you may have about the products and they are very well educated in their products👍 very helpful and very friendly. They are awesome 🤜🤛. I can't say enough about this grow tent too. The thing is a beast. I could use the canvas tent to make a trampoline and i doubt it would break its that thick👍 I've had some cheaper tents made of 600d canvas and they aren't that bad. But when you get a tent made from 1680D canvas material it's insane how strong and heavy it is. Before I put the tent together when I lifted the canvas to start wrapping the frame I said to myself.. LORD TUNDERIN JESUS this has some nice weight to it. It was the easiest tent to put together that I've ever had. I went inside with the lights off and got someone to turn it on after a minute or two to look for light leaks and there was none👍. It even blocks out some noise, so if your fans or filters are loud, once it is zipped up it gets quieter. this tent is awesome with So many ports and vents for whatever you need to hook up to it. It has frame bars down the middle and one vertical pole in the middle to keep it sturdy but the poles are made nice and so thick that they probably didn't even need a vertical bar in the middle. It has 2 separate 4x8 floor trays that divide it into 2 4x8 tents. All you need is a mylar divider to easily divide it in half. I love the stickers it comes with. It's nothing big to some people but I know there is lots of people that like them because you see them everywhere in people's tents and in pictures. I love them they are super cool stickers👍. It really locks in the light and temperature and humidity good. Lots of room for all the equipment I have to go in it and will get to put in it. Be good to bring camping too🤣🤣🤣🤜🤛. Thanks for stopping by and taking the time to read this and please leave a comment 🙏🤜🤛 if you have any questions about any of the products I use please feel free to ask me and I can help you out👍🤜🤛 I also know about all their other products too, so any questions about stuff I'm not using I can still help you guys out🤘 and ask about pricing if you're interested in anything and I'll see what kind of deals I can hook you up with. But don't just buy stuff.. let me know so I can talk to my friends at mars hydro and probably get you a better deal👍🤜🤛 https://www.mars-hydro.com Promo code: Rocknroll Instagram: @marshydropenny Here's some more information about these products I'm using: The goal of MarsHydro is simply to produce the best value grow tents in the  growing field and they didn't disappoint me at all. I'm beyond satisfied with everything. And with the most up to date hydroponic equipment at the lowest prices possible. Their grow tents have combined all their engineers and customers' advice to produce these unbelievable tents.. they really listen to us and change things to our liking so if you own anything from mars just contact them and let them know.. they take our advice and considerations VERY SERIOUSLY so don't hesitate to let them know 💪🤜🤛 The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍 https://www.mars-hydro.com/ Promo code: rocknroll Instagram: @marshydropenny GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! https://www.mars-hydro.com         PROMO CODE: rocknroll Instagram: @marshydropenny Happy growing to all my friends 🤜🤛
Likes
4
Share
@Eschbobs
Follow
Last week before harvest. Flushing with normal water PH 6.5. Trichomes looking good
Likes
22
Share
Es ist einfach wunderschön anzusehen wie die Buds sich immer weiter aufplustern und dabei aushärten. Dünger gab es das letzte mal vor einer Woche und seit dem nur noch mit Wasser gegossen. Egal wo ich hinsehe sind Trichome die glitzern. Die letzte Woche läuft jetzt und jeden Tag checke ich die Bernsteinfarbenen Trichome ab. Dannach bleibt sie 2 Tage im dunkeln stehen, bevor ich sie aufhängen zum trocken.
Processing
Likes
6
Share
10/20: I foliar fed her today with some SP-90 humic/fulvic acid and kelp me kelp you. She will probably get fed again tomorrow. Drying out quickly- 10/21: I applied Axiom again today..I sprayed her with the finest mist I could produce..tops and bottoms of all leaves to the point of runoff. I fed her about a 1/4 gallon with nutes. I put another big fan in the closet and turned off the evap cooler for the night so she'd dry out better. 10/22: I used a stainless steel skewer to poke a bunch of little holes in the lower part of her fabric pot to try and improve oxygen availability to her roots. I also carefully arranged the garden so that there are gaps between all the pots. I think I'll also space my waterings a little further apart. The topsoil is drying out well enough, but I don't want her roots sitting in muck. 10/23: She's flowering now, and starting to stretch a little bit. After observing signs of nitrogen toxicity yesterday, I realized that I made another rookie mistake...(where is my head??) The new 5 gallon bucket I'm using to mix a batch of nutes must be about 2 inches shorter than the one I had been using, and I never bothered to calibrate it....which I did today. So, for the past couple of feedings, I've been mixing in enough nutes for 5 gallons, but in only 4 gallons of water!!! I foliar fed with BoomBoom Spray and gave her about 8oz of boomerang and cal-mag early in the morning, and by 5pm she looked happier. Compared to the hybrid seedlings in the space, she's got very narrow, sativa-looking leaves..should be a treat!😋 I raised the lights about 2 inches today and dialed the ac infinity's high temp trigger up to 88f for a bit to get her to dry out a little faster, so the RH climbed a little higher as well...so I also set the ac infinity's high humidity trigger threshold to 65%. 10/24: I fed her another little dose of boomerang and cal-mag, along with some bembe and open sesame. 10/25: I fed her about 1/4 gallon with everything except Grow Big. I'll flush her on Sunday or Monday with Sledgehammer and only foliar feed with fulvic acid and boom boom spray until mid-week. Then I'll give her a good douching with humic acid, myco, tricho and beneficial bacteria and bembe(molasses and beet sugars/rock phosphate/trace elements) to keep the microbes thriving. I'll go heavy with P and K later in the week. 10/26: Last day of week 4 and she's doing great! Her pot is still pretty heavy after her feeding yesterday, so it will probably be Monday before I flush her.
Likes
10
Share
Here I am again, I've been neglected this diary for 3 weeks so I made a fast update on the last 3 weeks, not so detailed unfortunately. Today is day 58, some leaves are yellowing and I don't understand what it could be. It seems a Phosphorus deficiency but there are also this strange rusty spots on some leaves on top of the plant. From what I know in case of deficiencies the first leaves to suffer should be the ones in the bottom part of the plant but I don't know. I upped the calmag a little because the rust spots could indicate calmag deficiency. Learning something new everyday with this hobby, I just hope I manage to stop the problem because in my previous grow I had a similar problem and didn't managed to stop it so in harvest time all the leaves were basically dead. Anothe detail I'm not happy about is the not so even canopy I created. I think I started LST a little too soon and therefore deformed a little too much the plant. Next time I'll try to top for the first time. Other than the problem I mentioned the buds are stacking up really really nice and they smell amazing. Real frosty buds it seems as you can see from the video. I hope I'm doing good :D
Likes
2
Share
Vegetative steering Aiming for: leaf Temp -70f CO2 300 VPD +.93 Planning for: MJ and bras foilar 60%+1.5/-71f set to 68f+1.5 Leaf Temp is about 3f higher than ambient temp At 68f outside, grow room still wont hit 68 with lights off Day 24 No Co2 50-55klux 15inch from light Leaf Temp 71-73f 60%/72F Veg steering Coconut water Uneven canopy(11 at 29inch, 3ag 31 inch ———————— Day 26 56%68f(humidity dropped because i havnt watered in two days 🤡) 23inch-34inch tal. Arranged in order. 52-59klux Sprayed 5Bras,(23inch)70 leaf temp 4Jas,(29inch) 70 leaf temp 4Bras&Jas(34inch)72f leaf temp ——————— Day 27 Watered once ————- Day 28 Im pretty sure the sprays worked. Noticed leaf burn with 3 plants sprayed with MJat 147ppm(.5ml) No leaf burn with the .1Bras sprays I wonder how long both are good for. Also, can i pour the unused spray in the medium? I just dont want to waste it. Plants are noticeably more vigorous. I am wondering if now is a good time for my defoliation. i was planning for Week 5. I feel like the buds are to developed for me to be pruning off lower buds and makes me feel like i should have pruned beginning of week4 __________
Likes
7
Share
@cadur
Follow
I can try and cobble together some lovely prose however nothing much has changed since last week!
Likes
Comments
Share
WEEK#9 DAY#56 :She could use some water . Easy going grow , slow vertical climb multi-lateral branching . I could selectively prune to encourage vertical growth but at this time I think the grow is going fine . I anticipated the plant being larger at this time athough I’ve never grown this strain before to know what to expect I think another 4-6 weeks of VEG will do her nothing but JUSTICE . Still watering to make those dry amendments available . After these 28-31 days we’ll transplant her into her final 6gallon pot . Or atleast I think that will be her final pot I see the benefit of stepping up pot size gradually and honesty think the growth is healthier when done that way I’m just being lazy and don’t feel like up-potting 3 or more times . I just wanna make small adjustments and move on ya know ? Week#9Day#56Update: 2/3 older girls showing signs of flushing, there’s heavy yellowing top of the plant & purple hues beginning to show. The two of them should have 3-4 weeks left & the buds have not even began to swell yet so I’m worried I missed my feeding time after I gave them nute burn beginning of flower so my fear is that my bud won’t swell & I’ve just jacked up my harvest the last half of flower. I’m going to try & get small amounts of nutes in there to help the bud develop without giving too much to mess up the end of flower flush . The final older girl isn’t showing any signs of flush it is the smallest of the 3 & therefore perhaps did not consume as much food as the other 2 girls is all I can think considering all three ladies soil came from the same batch of premixed “soil” they weren’t individually mixed It’s almost time to get these older girls out & get some note-worthy shots of “Cellie” growing All ALONE into this 5x5. Heavy heavy heavy defoliation. Will pony-tail when the fan leaves grow back out Week#9 Day#63 Update: started pony tailing her tops that are large enough to pin back without decapitating/severing the top . The top dress feeding I gave her still hasn’t become plant available yet. She’s still yellowing . I’ll be glad to see her park back up & continuing growing on. I purchased some worm castings I’ll top dress with a few tablespoons before watering her in & see if that perks her up until the Gaia Green is broken down. Shes almost tall enough to come down off that 1gall bucket even before transplant into a 6gal planter like the older girls finishing up .
Likes
9
Share
@MG2009
Follow
03/13/2020 Week # 2, of flowering and all looks well more pistils popping up everywhere. Better pics coming soon no time this week. Day 3 week 2 some defoiliating
Likes
3
Share
Got to love some 🍧 Here we are somewhere in week 3 and she look banging very healthy very happy for sure ,stayed rather short compared to her friends but i rather have them short than tall anyway ,starting to put on flowers so last night ive cleaned her a little bit so top flowers can get all the energy,been feeding every other watering so far so good 😊 💚