Likes
Comments
Share
Been away for 10 days so had a friend go up and water for me just water without feed as I realised I was giving it the bloom and the dragon force which should be one or the other first I’ve seen since being back looking pretty done to me gonna leave it a few days see if buds are still fattening up a decent amount
Processing
Likes
17
Share
@BlumenBot
Follow
1/4 - start of week 5, the broken branch isn't looking good. I installed the 5 arm light which is my biggest light for the veg compartment. 500ppfd right now, drop it 1 inch and I'm just a bit over 600 at canopy level. I'm hoping to get her to recover and ill bend the 2 remaining branches towards each other to fill the gap for a 3 arm lady, still planning to top but now will get 6, 12, and 24 tops...hopefully 1/5 - slight training day, I bound the 3 branches so that they were more uniform and evenly spaced out in the pot. I'll let her take shape a few days with the restraints and the. Top her maybe Friday. 1/7 - she got her topping. I'm leaving 2 nodes on each branch for a total of 12 tops right now. She will get one more topping before its all over for a total of 24 tops, probably 2 weeks out on that. Feeding in the next day or 2. Update: dropped the fan speed to 2 for temp and humidity testing. 1/9 - RAW Feeding tonight, she is starting to recover well from the topping, I now have 15 or so tops with one of the 3 arms splitting into 7 tops rather than 4. I think I will leave her this way to veg out to the height I need without further topping. I’m planning on training the shoots out to the sides so many more tops may develop as new nodes come through. I’m just really hoping she doesn’t start to flower on me early!! 2L distilled water 3g Grow 2g Kelp 0.57g Cal/Mag 2g Microbes Grow Stage 0.63g Amino Acids 0.14g Enzymes 6.0ph 66.9*F 1060ppm Also found a new way to mix my RAW nutrients without having them stick to the bottom...small landscaping pond pump! It gets the water moving nicely and I just drop the dry nutes in, mixes it for me and I can easily fine tune PH and test PPM without having to shake and take samples! Huge win. 1/10 - Another week in the books. Did some fan leaf tucking so the tops had direct light. I'm still trying to grow her sideways so I'm thinking a solid 3 or 4 more weeks of veg. Things should speed up now though. I dont think I will be topping again but we shall see. Topping again would guarantee 30 tops which according to my math is a bit too many for my grow space.
Likes
18
Share
Likes
19
Share
@DrLaggis
Follow
HELLO GROWING FRIENDS - Please look at my Aftermovie Growvideo, which cost me about 4 hours to create. hope you like it! Day 72: The Finale 🌿🌟 It’s finally time. My very first grow is coming to an end—at least the cultivation phase. The plant is now ready for harvest, and I can’t believe how incredible this journey has been. I never expected to enjoy the whole process so much—from nurturing the plants to watching them grow and evolve. I’m absolutely hooked and can’t wait to dive into the next steps: harvesting, drying, curing, and of course, starting a new grow soon with fresh ideas and experiments! While it may not be the largest yield, the quality of the buds speaks for itself. The time, love, and care I’ve put into this grow is visible, and I’m pretty proud of the results. I’ll admit, I was a bit impatient at times (which I think every first-timer can relate to 😅), but the experience was priceless. Here are a few interesting highlights from my trimming and harvest process: 1️⃣ Dark Phase Before Harvest Two days before harvest, I put the plant in complete darkness to encourage resin production. I'm not sure if it really made a difference, but it was worth trying! 2️⃣ Wet Trim vs. Dry Trim I decided to go for a wet trim because the buds were really dense, and I wanted to avoid any risk of mold. I’ve read that wet trimming can speed up drying and may slightly impact the quality, but this is part of the learning experience. Next time, I’ll try a dry trim for comparison! 3️⃣ Yield Update Wet, the total came in at 209 grams from my plant. Trimming took around three hours, and it was actually a lot of fun, despite the time commitment. 4️⃣ Curing Plan The buds are now hanging in the tent for about 8 days. Once dried, they’ll go into jars with Boveda Packs (62% humidity) for another 3 weeks of curing. I'll update the smoke report once they’re fully cured, but I’ve already had a sample of the same strain from a friend, and I can say it’s pretty amazing. Final Thoughts on My Grow 🌱✨ As mentioned earlier, this grow has been an absolutely incredible experience, and it has definitely set me on a path to jump right into my next grow. There were ups and downs along the way, such as over-pruning, which I believe stressed the plants a bit. Additionally, I think they could have benefited from an extra week to mature. We also faced many temperature fluctuations this summer, which impacted the plants due to external weather conditions. I’m really pleased with the quality of the buds. The quantity is okay—I can’t fully gauge it yet—but I’m sure there’s more potential to unlock. I’ve gained valuable experience in what worked well and what didn’t. Overall, the countless lessons learned during this grow far outweigh the few mistakes made. I’m incredibly proud of my first results! As this long journey comes to an end, I want to thank everyone who followed along. I hope you enjoyed all the content. In that spirit, happy growing, and see you next time! 🌟
Likes
3
Share
@UDUDUDUDU
Follow
one failed, da one dat waz clearly going to :) Da rest R interesting. DID YOU know dat Bean stalks saturate da soil with nitrogen from da air ?
Likes
7
Share
@Coopmc
Follow
These all so fine this one I would say is but more Indica 2 was a bit more Sativa and 1 was about right down the middle Oh man she beautiful all 3 about same small diffrence but all had good indoor struckture and so far high flavor all remind me of Skunk#1 Easy to trim big dence buds
Likes
3
Share
Likes
Comments
Share
Did not have any issues growing plant amazing outcome!!!!
Likes
15
Share
Hi Cannafam, its all about the microbes! Brewed a tea for 24hrs, of the soil activator 2.6g, fresh organic kefir 100g, EM1 4ml, aquaponics microbes (fresh semi solid fish waste) 100g. and molasses at a rate of 20g per gal. or 5g per Litre. Once brewed add yucca at a rate of 1ml per gal, then use as a foliar spray and root drench. Just thinking I should have added some worm castings to the mix as well. That's next for next week I guess.
Likes
19
Share
Very easy strain to grow. I grew the White Critical Express previous to this grow, I really liked it and wanted to try growing an Autoflower so I went for the Critical 2.0 and it was worth the grow.
Likes
78
Share
@Hou_Stone
Follow
Photo taken on day 68 / Flowering 35 ------------------------------------------------------------ 💧Watering On average I water each pot with: Day 64 : 1 Liter Day 67 : 1.5 Liter with Bio Enhancer I add Bioenhancer once every 14 days +/-. with 1 gram per liter I add very few nutrients to my water because I have already placed Bio Nutrients directly in my soil 😉 (BioGrow & BioBloom added on week 1 & 5) ------------------------------------------------------------ 🔥❄️Temperature of the week : Day : 21-24°C (Humidity : 55-70%) Night : 16-19°C ------------------------------------------------------------ 🚀Equipment of the week ⭐️ : Lamp Led 300W : power 95% at 30cm Extractor+ carbon filter ON 24/24h 2 fans ON 12/24h ------------------------------------------------------------ 📜Links : Banana Krumble seeds 🍌🌲 : https://shop.greenhouseseeds.nl/feminised-cannabis-seeds/usa-genetics/banana-krumble/ Food for your plants 🔥🔥👍 https://www.greenhousefeeding.com/ 👨‍🚀My Instagram 🌱❤️️: https://www.instagram.com/hou_stone420/ ------------------------------------------------------------ ☮️Thanks for your visit💚☮️
Likes
31
Share
Perdon por la demora , la verdad es que comencé la cosecha hace 1 semana y aun no he terminado. Los tricomas están con un color lechoso, cuando termine con la cosecha subiré más fotos y datos.
Likes
18
Share
She has held up well managing the environment so far she has very few leaf burn but not concerning. N13 is showing signs of bloom the white hairs shaping up to be round like cotton balls with no leaf fading. The N13 has received 600ml of nutrients to get her through to the end of bloom and she stands approximately 57cm
Likes
2
Share
Left N1 to grow for 2 more weeks with cotton berry plants as they need around 2 more weeks as well. All other plants are big with loads of buds. This seed line is super good
Likes
241
Share
📆 Week 8, 12-18 March 2024 12-18 March - Let the plant grow and observed. 📑 The end of this week, the start of next week she will be flipped into the 12hr cycle. I look at the beginning of the period a little different than most. This transition can take up to 2 weeks before pistil formations can be seen - a true sign of flowering, and during this time it has the potential to gain substantial mass. So I continue to consider it in a vegetative state until flowers start forming. It’s easier for me to keep up with actual flowering weeks this way. 🍽️ 12 March changed nutrient solution 🐲 12 March updated feeding schedule 🌊 Using reverse osmosis water with EC/TDS at 0 🐉 Nutrient Solution EC 2.5 at 63 degree F 💡 Light power at 50%, DLI 35 canopy coverage at 18hrs That is it for this week. Thanks for the look, read and stopping by.
Likes
16
Share
I think I'm lucky because I can't see any damage on the plant. Hopefully it's stay as easy as it's now. You can comment if you see any mistakes which I made bc its my first grow :). Keep Growing
Likes
14
Share
@Dre25
Follow
Happy what I see so far, I know patience is the key. All my babies looking Beautiful!!! 😭😊😭 7/14 Growing Strong 💪🏽
Likes
40
Share
While we're not huge on autoflower plants, this one turned out really nice, not a huge yield, maybe just over an Oz dry but her bag appeal can't be beat.. we may actually grow this strain again but probably outdoors, our autos always seem to preform better in the garden. Thanks for reading and happy growing everyone