On day 1 I changed out my reservoir. I lowered my nutes to 650 ppm(25% reduction). I adjusted the PH down to 6.1. My left plant has some burnt tips from either PH shift or over fertilization. My hope is that the lower ppm will help to resolve the issue before it spreads. On day 2 I adjusted the reservoirs PH from 6.3 to 5.9. On day 3 the reservoirs PH is 6.0. I installed my new 200 watt HLG Rspec. I adjusted PPFD readings to 700-1300 PPFD on all tops. On day 4 I adjusted the reservoirs PH from 5.8 to 6.2. On day 5 I adjusted the reservoirs PH from 6.4 to 6.0. I diluted my nutrients in my reservoir by removing one gallon of nutrients from the rez and and adding 2 gallons of straight tap water to the rez. This brought the nute concentration from 770 ppm to 540 ppm as the plants will be entering the ripening stage in a few days and they have too much nitrogen judging by the extremely dark green leaves and burnt leaf tips on some branches of the left side plant. The buds seem slightly smaller then my last run which may be due to an excess of nitrogen and maybe not enough light as some of my tops are taller then the others making proper PPFD challenging. All in all the girls are coming along nice and I look forward to the final weeks of flowering 😀 On day 6 I adjusted the reservoirs PH from 5.9 to 6.2. I think I have halted the nute burn as I haven't seen it progressing any more on the leaves. I will continue to monitor closely during these final weeks. The trichome production is increasing with some trichs on top of colas starting to go cloudy. The pistils are turning brown with roughly 40-50% are turning brown all signs I'm getting closer to the harvest window 😆. I dimmed my light to give 600-1000 PPFD to tops. On day 7 I reduced my temps to 75 during the day and 68 at night. I adjusted the PH of the reservoir from 6.6 to 6.1. My reservoirs ppm was too high so I diluted the rez with 2 gal of tap water. This brought it down to 480ppm. The average ppfd to all 14 tops is 604 with no top receiving more than 1000 ppfd

They did amazing Soaked for 12 hours, they were already starting to show taproots when I put them in the paper towel 16 hours later, they went into solo cups, sprouted soil the next morning🔥

Running out of space with the GSC 1 of the GSC is looking great with some really nice flowers coming along the other 2 seem to have a-lot less bulk in the flowers and seem to be stretching a fair amount. I have had to do some super cropping to keep the top of the flowers from getting too close to the light. Had a problem with the nutrient tank filter getting clogged and al, the auto pots drying out! One of the plants had started to wilt. Ended up taking the reservoir out and cleaning it before adding fresh nutes. Have been using professors gold terpintine for flower but have had this problem before the additive ends up causing build up of growth in the tank and this build up blocks the hoses. For now have stopped using and just using: GT FLOWER FOR COCO A & B GT FLUVAIC ACID GT CAL MAG GT POTASSIUM ADDITIVE PPM at around 600 down from 800 as I was getting a bit of tip burn on the shade leaves. Not really happy with how a couple of the plants are progressing, the buds seem way undersized for week 5 but will carry on

Pour le jasmin et le soulubol c'est 1 gouttes jasmin 2 gouttes solubol dans 5 litres d'eau ça aide pour la production de résine .

One of the standout features of Auto Purple is its ability to change colors without requiring extra effort or investments from my side. Witnessing the gradual transformation of the plant added an extra layer of excitement to the cultivation process. The vibrant hues brought about by this strain created a visual spectacle that exceeded my expectations, and the joy derived from the resulting photographs is undeniable. Despite the visual triumphs, I couldn't escape the recurring issues that often accompany autoflowering strains. The yield, much like my experiences with other autos, fell considerably short of expectations. This common challenge posed by autoflowers prompts a reevaluation of expectations, acknowledging that their unique traits may require a different approach to achieve optimal results. In summary, Auto Purple by Pyramid Seeds offered a delightful visual experience with its natural color changes and fruity notes, marking a positive step into the realm of colorful strains. However, the persistent challenges in yield highlight the need for a nuanced approach to cultivation when dealing with autoflowering varieties.

Hello everyone! well friends !, so she took her final forms! from today it switches to flowering mode 12/12 .. in the diary I will add a week of flowering when it starts blooming and not when the light mode has changed .. I don’t like it when they do it .. it gets confused .. 2 weeks is needed for flowering to begin active after switching to 12 hour mode .. and those growers who add weeks of flowering when switching to 12 hour mode, damn you!)))

There’s microscopic bugs crawling on my buds! Going to post a grow question about them. No more nutrients, she’s definitely getting close, so let’s use plain water and hope for the best in the next week or two.

_____📅 Week 13 | 6nd week flower | 📅 Day 92 - 98 | 12.04 - 18.04 ______ 18.04.25 | Day 91 🌞 🔸Chilled Cherry is developing great, it has produced a lot of trichomes and smells incredibly deliciously sweet, creamy, cherry-like. You can imagine what the smell in the tent is like together with the runtz...awesome 😍😍😍 🔸I pour 5 liters of nutrient solution into the bucket every 2 days. But at some point you have too many nutrients in the solution and you have to change your water. The small burnt leaf tips are exactly the result of this... changing the water too late and having too many nutrients in it...but this still looks hamless 🔸What can I say, I'm thrilled...She really got very little love from me, but still developed remarkably...The side light is doing its job, I wouldn't know how else to light this monster properly...I'm 100% sure I could have gotten a lot more out of this grow. But I'm glad that my first DWC grow is going so smoothly. 😊 🔸There are still at least 2-3 weeks to go...Lets goooo 😜👌 _____________________________________________________________________ 🌡️🔆= 25-26° 🌡️🌜= 18-19° 💨 Hum. = 58% 🔦 PPFD = 1000 umol 12/12 🔦⌚DLI = ~43 ___________________________________________________________________ Equipment: Veggie 💡2 x 200 Watt Cosmos LED 💡2 x Glow80 Spider-Farmer (4x40Watt) 💡1 x SF-600 Spider-Farmer ⛺120 x 120 x 200 Tent (4 x 4 x 8) 🍯 18-20 liter Bucktes

A planta segue forte aflorou um pouco do overfert da última semana mas ela segue resiliente e engordando. 💪🏽

last week only water, almost ready to harvest, she smells sweet and piney

Such a good week, introduced bloom and the girls are taking off. Got a Mars hydro exhaust fan and carbon filter to help with the incoming smell, what you guys think? Am I doing alright for my first grow? Happy growing

Incredible cool variety! clones take root without problems .. excellent variety for cloning .. not whimsical .. resistant to heat)) in general showed excellent growth and a great harvest with an excellent effect!

Gracias al equipo de Zamnesia, Marshydro, XpertNutrients y Trolmaster sin ellos esto no sería posible. 💐🍁MAC 1: La MAC 1 es una variedad muy solicitada, creada originalmente por Capulator y distribuida solamente a determinados criadores y cultivadores. ¡Pero ahora ya puedes cultivar este tesoro en casa y disfrutar de sus cogollos densos, jugosos y potentes! Gracias a su densa copa y vigor, la MAC 1 es una opción ideal para LST, poda apical y otras técnicas de entrenamiento (incluido el lollipopping). Cuando entra en floración, las plantas de la MAC 1 se estiran bastante y una vez maduras pueden alcanzar una altura de 160cm en interior y más de 180cm en exterior. De media, las plantas feminizadas de la MAC 1 necesitan un total de 9-10 semanas para terminar la floración, momento en el que estarán repletas de cogollos índica pequeños y compactos. 🌻🚀 Consigue aqui tus semillas: https://www.zamnesia.es/10906-zamnesia-seeds-mac-1.html Código Descuento 20%: ZAMMIGD2023 💡TS-3000 + TS-1000: se usaran dos de las lámparas de la serie TS de Marshydro, para cubrir todas las necesidades de las plantas durante el ciclo de cultivo, uso las dos lámparas en floracion para llegar a toda la carpa de 1.50 x 1.50 x 1.80. https://marshydro.eu/products/mars-hydro-ts-3000-led-grow-light/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 💻 Trolmaster Tent-X TCS-1 como controlador de luz, optimiza tu cultivo con la última tecnología del mercado, desde donde puedes controlar todos los parametros. https://www.trolmaster.com/Products/Details/TCS-1 🍣🍦🌴 Xpert Nutrients es una empresa especializada en la producción y comercialización de fertilizantes líquidos y tierras, que garantizan excelentes cosechas y un crecimiento activo para sus plantas durante todas las fases de cultivo. Consigue aqui tus Nutrientes: https://xpertnutrients.com/es/shop/ 📆 Semana 4: Aparecieron un monton de erizos esta semana, el temporal ha hecho algo de mella en la carpa al bajar las temperaturas aunque todo sigue correcto. Continuamos con las dosis de nutrientes recomendadas por el fabricante.

Week 8 (17-3 to 23-3) 17-3 Temps: 17.4 to 21.9 degrees Humidity: 60% to 72% 18-3 Temps: 17.5 to 22.2 degrees Humidity: 54% to 65% 19-3 Temps: 17.9 to 22.4 degrees Humidity: 52% to 61% Watering: Both 500 ml. EC: 0.4 Watering: Both 1000 ml. EC: 1.4 Defoliated both plants and attached some shoots to the rack. She got really big fan leaves! I also supercropped some branches. 20-3 Temps: 18.2 to 22.8 degrees Humidity: 59% to 69% 21-3 Temps: 18.5 to 23.4 degrees Humidity: 57% to 67% Watering: Both 1000 ml. 22-3 Temps: 19.4 to 24.1 degrees Humidity: 55% to 67% Watering: Both 1000 ml. Set the strength of the light to 50% 23-3 Temps: 19.8 to 24.8 degrees Humidity: 58% to 67% Watering: Both 1000 ml. As you can see, instead of removing the leaves, i tucked down all the leaves to open up the canopy. I will see if i like this method as its the first time i try this. I also attached some more shoots to the rack, its looking nicely spread out now :) The #2 makes my fingers very sticky and smells really strong! I love it!

New week for the 2 purple berry Kush I think the purple berry Kush needs couple days more then the rest but it's going great there at a size that adding extra nutrients is waste and only making flushing take longer so starting to lower all nutrients and preparing for last week exited times Happy growings Growmies 🤜🏻 🤛🏻 visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter

This month and the next will be at day, 40 Celsius, i have the lights on at night , 18 Celsius, and I got a water atomizer that being more humidity to the grow. She handle the hot, till now very good.. Let's work on it. This seed it was the last that James from RSA send me and, due to several problems i never can't make a RSQ diary.. She grow, a 2year seed! Congratulations Royal Seed Queen! I will do my best this time.

This update is a day early but this girl is booming growth in the last week has been amazing shes drinking like a monster gobbling it up .started the bowl training got the top 6 branches tied will tie the rest when they are big enough removed a few leaves I think shes gonna start showing some pistols shortly hope can get a bit more growth first but im happy with her thanks for reading happy growing guys

I kept tucking those branches pretty hard and mad a decent canopy. Though I may have over done It and now my forest is pretty bush. Day 10 of flower, Im gonna defoliate and maybe lollipop a bit in the next few days and then add next layer of trellis to use as support. Started adding Canna Boost. Other than that, I fixed my calmag issue by switching to tap water, but Im not feeding nutrients at full strength since I have pretty hard tap water.