Likes
Comments
Share
@FordWenty
Follow
Here is where I'm at for week 10. It includes a short tent tour and shows my other plant which is the same strain but 2 weeks younger.
Likes
72
Share
@Roberts
Follow
I am starting Auto Maxi Gom. I scuffed the seed lightly, and placed her in a glass of water. She will be in there for 24 to 48 hours. Basically once I see a root tail start I will drop her in the coco. I will dome her and keep moist. She will be under a Medic Grow Mini Sun-2. She will be in Xpert nutrition. Thank you Medic Grow, Seeds Mafia, and Xpert nutrition. ๐Ÿคœ๐Ÿป๐Ÿค›๐Ÿป๐ŸŒฑ๐ŸŒฑ๐ŸŒฑ Update: first seed appeared to be a dud or just really slow to germinate. I started a second seed, and it went right away. Thank you grow diaries community for the ๐Ÿ‘‡likes๐Ÿ‘‡, follows, comments, and subscriptions on my YouTube channel๐Ÿ‘‡. โ„๏ธ๐ŸŒฑ๐Ÿป Happy Growing ๐ŸŒฑ๐ŸŒฑ๐ŸŒฑ https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Likes
40
Share
@valiotoro
Follow
Brocoli buds!๐Ÿฅฆ Super sticky & delicious smell its just sweet๐Ÿคค When you smell the amnesia Z she seems to be kind but trust me roller coaster effect !๐ŸŽข
Likes
14
Share
@Phurlax
Follow
Day 36: just tucking leafs Day 37: cleaned and added new charcoal to my carbon filter lots of better airflow now old one was several years old Day 38: watered 1 gal of ph water Day 39: looking good lots of trichomes been reading that uvb light helps thc production so I ordered a bulb will have in the next few days Day 40: tucking leafs Day 41: watered 1 gal of ph water with .25 tsp tiger bloom. Day 42: decided to water 2 more gallons of ph water just to be safe for any nute burn
Likes
20
Share
1st week generative phase: Pre-flowering and the next problem with the two topped specimens: Yellow leaf tips - too much nitrogen. I just thought: Close your eyes and go for it.... Organic cultivation regulates itself - well, at least in theory.... ๐Ÿคฃ Cannazym works wonders! I love to highly recommend. I work with it from pre-flowering to harvest and gently increase the dose. A word about water quality... ๐Ÿ’ฆ I now use oxygen-enriched reverse osmosis. Since here in Berlin the pH value is basically very hard (very calcareous water) and not all plants can cope with it, I decided to invest there. Not cheap, but incredibly effective.
Likes
28
Share
@J_diaz420
Follow
Comienza la floraciรณn de estas pequeรฑas!! Cambiamos lรญnea de fertilizantes gracias a b.a.c ๐Ÿ‘๐Ÿ‘จโ€๐ŸŒพ๐Ÿป๐Ÿ€
Processing
Likes
4
Share
Flip the script to 12/12 waiting on a small tent via amazon to put my MILF in so I do not contaminate the other ladies, clones are hanging in there hope they will be ready to go into flower at 21 days. I just potted up to a 5 gallon fabric pot. They were drinking so much they were dry in 1 1/2 days. gave them a mild feeding and a good watering did not want to give to much trans nuites this week as I just lolly popped and potted up on the same day they look healthy enough to take it but I did not want to over whelm them with the food. so the plan moving forward it to start spraying MILF A in her own tent while the others flower in the big tent then the clones will move in to the tent and flower for 3 weeks all the while spraying MILF A 2 times a day with the CS the hope is by off setting the clones and the mothers by a week the MILF at 4 weeks while have Feminized Polled sacs that will be ready to sprinkle on the clones the other to mothers will flower to completion be chopped and dried and the clones will go until the seeds are mature with in an extra week or two. Stay Safe๐Ÿ™ I will post more pics this week end.
Likes
11
Share
Havrested a bit before just becouse i needed to have a harvest before the full one
Processing
Likes
15
Share
@MG2009
Follow
08/09/2020/ start of week 3 flowering, I think I'm seeing P deficiency? Watered her with LAB to see if it helps going to put a couple spikes of 4-9-3 around the outer rim, and water in with more LAB to get the microbial army mobilized.๐Ÿ™
Likes
26
Share
They were good phenos. Very similar and nice buds. Super dense and dripping in resin. Lovely aromatic smell have been developed and was a great addition to my VERY LARGE crop this time. Both phenos grew great. P1 was just under 10 weeks. Pheno 2 was just touching into wk 7. Amazing smells from both. Dense buds. Big yields. Really happy to have ran this strain. Very fruity, exceptional quality & taste. Averaged about 70-90 grams for Pheno1 & Pheno 2. (Both plants cured 2 + months now. Really happy with my MSNL strains I ran this crop. Will be looking to add more in a few weeks for round 2 of my planned amount. Thanks to my sponsors from MSNL & XPERT NUTRIENTS. AMAZING DUO. Appreciate all who stop by. I thank you and look forward to seen your diaries. Either way thanks for dropping by. DISCOUNT CODE FOR XPERT NUTRIENTS 20% OFF CODE:
Likes
4
Share
Transplanted and topped today. I always transplant and top at the same time as new shoots equals new roots! Maximize your grow! The roots are looking amazing for this transplant. I made another coco perlite and gaia green mix. This time with a 1:2 ratio of the 4-4-4 and 2-8-4 because I will be flipping to flower the week after the plants have recovered from topping. On transplant I use a mycorrhizae powder to reduce transplant shock and aid in nutrient uptake and root development. They still need some nitrogen to support them during the stretch but the added phosphorus helps with the stretch along with potassium to setting buds. I also installed my first layer of trellis to weave the plants in early. At the end of the week I got 2 autos and wanted to see what I could do with them so I planted them and then also got rid of one of the Caramel Creams (C.C) because it was lagging behind the other one a little to much.
Likes
25
Share
week intel: its time for second pruning they grew up too fast and need second pruning as below : first i remove big fan leaves and only leaves then let them rest for 1 day then the second part of pruning will get done that is removing branches based on these conditions: 1-if the branch is very low and never can make it to the top , 2- if branch is in shade even after pruning fan leaves , 3- if there are too many branches at the small space then non of them will get resources so if there is no space for branch then , they must get remove. everything is perfect! stresses : pruning big fan leaves and lower branches + a little E.C stress around 1.7 once a week feeding: i feed them 3 times this week with this order : day 1 : i feed them heavy with silicate +base nutrients(calcium & micros + Bloom) about 884 ppm - 1.7 e.c to cause a little stress. day 3 : i feed them low dose of Feeding Booster + Karbo Boost around 325 ppm - 0.6 e.c to let them recover a little but not fully recover still a little stress will caused. day 5 : i feed them with low dose of Top-Max + B-52 around 213 ppm - 0.4 e.c to let them recover the stresses to get ready for another stress next week. guide of the week : no more stresses from now on till the end and from next week i'll reduce the amount of nitrogen and calcium to below half to the end.
Likes
20
Share
A week or so more I think, dragged on a watering on the 31st, new lights dry fast, quite a bit of shock so they are looking rough.
Likes
13
Share
Week 5 day 1. I have a favourite for next run. Iโ€™m very happy, I havenโ€™t really defoliated at all this grow, just letting it grow. Wish I was going for mains(topping) but still very good. Going to wait around week 9 so seeds will be good for next run. I have decided to do very hard hst next round to show max potential. Very happy with supercropping so will do it very heavy with scrog. I will try to reveg the one I really like but it is difficult having only 1 set of lights and 1 tent. Plants are about 7ft tall, might just run 2 next round in 4x8 or will still continue to go 4 in the 4x8.
Likes
2
Share
went from 15 to 14 and then to 12 h - after second defoil in a few days and a 24 H lightday after that. 250 Watt HDL reactivated. Now giving them 6h 240W LED (1300PPFD) and 6 h 250 W HDL (1400PPFD) with 1h overlapp. Now using all of the Hesistuff like in the Plan : Root, Enzym, TNT, Phosphor, Bloom, Booster + Vitamins. Dripper overwatered a bit - back to handfeeding it. 3 fat psydo main-Colas are growing well :) plants seems happy with the haircut and the new lightsituation. - the LEDS are not as good as the HDL , they make a bit more PPFD from distance, but in shorter range and with good Fans the HDL is way better for the plant. new pictures will follow during the week.
Likes
11
Share
@russrahl
Follow
A month in now to flowering and all is still good. Stretch has stopped and the 2nd net is on about 1 foot above the first. I would have liked to have done a bit more defoliation earlier on in flowering but it was a busy few week. Still kept her on the lower side for nutrients and notice the one plant that got locked out earlier in the month was not as pretty as the rest and showing signs of deficiency still on her leaves but the buds are developing normal like the others, bigger even maybe...lol all in all itโ€™s still looking good at this point. Cheers ๐Ÿ’จ
Likes
20
Share
@GR0WER
Follow
๐Ÿ‘‹Hello, my friend!๐Ÿ‘‹ If You reading this, sign up to my profile, I will be pleased! I download new photos and comments updates every day! It will be nice to walk true this grow of my two Fast Buds 'Banana Purple Punch' auto flowers together! I asking a lot of grow questions and take part in a life of this grow community. New week starts! ๐ŸŒž28.11.2022 Today I came home and saw my smaller one showing four stigmas in the upper knot. I was afraid of she already starts flowering, but mates from 'Grow questions' made me kalm, answering that she's just showing her gender. It's too early for flowering and thet's how all autos do. Thank You, my friends, You've saved my nerves (as usual). I have watered my girls with full pack of GHE nutrients, including 'GHE Diamond nectar' and 'GHE Mineral magic'. Solution ph: 6.0 Drenage ph: I forgot to drain vater from pot's bottom and after four hours it was gone. So I'll measure it next time. I've done some more LST and sprayed them with 'GHE SeaWeed'. ๐ŸŒž29.11.2022 Today I asked one more grow question: 'Why all new brunches on my autu flowers has triple fingerd leaves?' Mates told me it's a fault of my substrate Ph and I can do some flushing to fix that. I took one on my girls (#1) and made this procedure deeping a whole pot in a bucket with 10 liters of ph5.9 water. Maybe it's some kind ob a black magic, but it did NOTHING. Inflow: ph5.9 Outflow: ph6.7 Substrate ph after 3 procedures: 6.9 I gave up. I'll not doing this to #2 and let them grow in that cursed substrate till the every end. I made small defoliation after all of this to bouth of my girls. Lowest leaves (first floor) was cut with a brunches growing from it. Also I cuted one fingered leaves of a first week. Results are on downloaded photos. ๐ŸŒž30.11.2022 Photos downloaded. Mb its my mind tricks itself but I noticed #1 starts growing faster after flushing. It was smaller than #2 and now it's almost the same size and even looks thicker. Tomorrow we'll see it more closely and I'll flush #2 if it's true. I watered #2 with full pack of GHE and sprayed them bough with 'GHE SeeWeed'. Also my BPPa#2 showed her gender today (stigmas on a upper knot). Yep, we have a girl here! ๐ŸŒž01.12.2022 It's a 'rest day' today. Nothing to wright. (Photos downloaded) ๐ŸŒž02.12.2022 I made some LST and sprayed my flowers with 'GHE SeaWeed' solution. Substrate ph rised by ph0.1 and now it ph7. It's critical already, especially when my BPPa#1 starts to show stigmas everywhere - almost in every knot. I think pre-flowering starts soon. She looks soft and wobbly, I think there is a deficit of some elements. But my substrate still wet, and I can't do anything. Tomorrow I'll make them both to bath in ph5.5 nutrients solution - and it's only thing I can imagine to do now. Relying on the best, waiting for tomorrow. ๐ŸŒž03.12.2022 Today I watered both of my plants with 'GHE' nutrients (TriPart + Fulvic acid + Roots stimulator + Selicates) and sprayed 'GHE SeaWeed' on the leaves. Also, I think I finally resolved my cuestion: 'Why ph of substrate don't want to go down?'. I take my water from kitchen crane, it has ~ppm110 and ~ph7.5. But clorine in this regular water slowly makes the reaction with asid I use to low it's ph. And slowly but surely ph of solution rises. I noticed this by making ph5.8 water and waighting 24hrs - ph of solution became 6.7 the next day. My previous grow I used distilled water only and thet's why I didn't know about this problem. It's a pity I made this guess so late. But it's better late then never. From now I will make ~ph5.2 water immediately after watering and it will react till next procedure (2 days). It's ph should rize above 0.9-1.0 by this time and become near ph6.0. I already prepared water for the next feeding - clear, without any nutrients (by now) and ph5.25 on it's start. Today my solution measurements looks like this: - Substrate ph before watering: ~7; - Solution ph: 5.8; - Solution ppm: 680; - Solution EC: 1.1; ... - Substrate ph after watering: ~6.9; - Drenage ph: 6.7; - Drenage ppm: 710; - Drenage EC: 1.03. ๐ŸŒž04.12.2022 The 'rest day'. My experinent with water ph was sucssessful. Now I know how to treat usual water to feed my flowers correctly. My next grow will be nearly perfect. And also, it's my first (and last) grow using autoflowers seeds. I don't like a grow process ether a future results. Regular flowers are what I can grow the best. So I'll stay on a 'photo' side of a force (after this auto grow ends). Week ends.
Likes
10
Share