She stretched on me last time. But I was too heavy with the light right away. Gave her light burn. I raised the light and turned it down to 25%. I think she’ll be fine. I’m excited to see how she’s going to do in a 5 gallon!!

🤤🤤🙏🙏🙏🙏🔥🔥🔥🔥🔥

Start of Week 5 Over the last couple of days the smell went from a slight hint before entering the space to a pungent smell that just wofts from the plants. I've never grown a full screen before and never noticed how much these smell. It is possible it could be the Granddaddy Purple but my guess from the good bag smell on this strain, that it's the critical smell. I have two sections of plants growing from the same feeding resivour. For the first time ever I've decided to do a mid grow flush. I ran through 1-2gal of water on each 5 gal bucket. I use only perlite as medium so I figured that I wouldn't need much to flush. It all drained back to the main resivour and I disposed of it. I ran a 24hr cycle of straight PHed tallboy filtered tap water (160ppm) and then drained that again (340ppm). I refilled the resivour with fresh nutes and PHed again (1100ppm)

I added a humidifier this week to the tent to stabilize humidity.This addition is working great at the moment. The plants showed signs of decent growth in there new home early in the week so I decided to top them. After a couple of days from there topping they are starting to take off with growth.I hope I can cut some clones in a couple weeks and than we will head into flower.Growth is in full effect as you can see by the video. Lowering my PH to 5.5 seems to have quelled the cal-mag deficiency I had in the cups.The bounce back from transplant shock was great this week. I was able to top them on schedule and all are reacting well.

the weather still very hot but it is doing well. Terpene is very strong now. Very sweet and fruity, but have some wood in it. Amazing. Keep growing.

So flushed for a week now and harvested all but one plant! Personally think I timed harvest time on a few plants wrong as they seem quite dark! Also picking at fan leaves very late on certainly didn’t help on two of the plants but overall for my first grow quite pleasing but know a lot can be improved on for my next grow! Personally also added canna pk13/14 to late into flowering time Harvest 2 x sensi skunk fem 1 x auto gsc 1 x auto bcn Remaining sensi skunk plant is currently in darkness for 72 hours before being harvested!

I did her first water change on day 10 upped the nutrient dose and increased the reservior to 12 gallons. Gave her the first dose of armor si and humic acid. I topped her on day 12 to start 4 main branches. Will most likely top again and start training in about a week depending on how she wants to grow. The goal is a maximum of 5 weeks veg if they cooperate. They are under 240w qb and a galaxyhydro pulling about 140w for now. Will be adding more qb when I spread the buckets out.

Hey growmies, it's the fourth week of vegetation for the HighCloudz and boy is it growing 👌 The fanleafs are really big, bigger than my hand! The plant is doing well on the Plagron feeding and looks very healthy. As the plant grows fast already I'm thinking about switching to 12/12 before the end of the week. I don't have that much vertical space in my growbox and this lady will probably stretch due to it's Sativa genetics. To prepare the branches for the ScrOG I started to bend them outwards. My goal is to get a nice and even canopy once she starts blooming. Stay tuned for more pics and updates later this week 😊 🌿🌿🌿 Mid-week update Even though the big fanleafs were cool, they blocked the light to the lower branches. I removed the biggest fanleafs and did some more LST for the upper branches, bending them outwards and to the side so they will hopefully have a good spot in the ScrOG net. The pant looks a bit run down after the defoliation and Cannabis bondage, but hey, she still has many weeks to go and I'm confident she will be a beauty once again :)

Well, as it's been 8 full weeks now it's time to change to flora, today the 24th of July 2023 I'm changing the time from vega to flora so they will take 12 hours of light and 12 hours of darkness thus starting the flowering phase, today I should have watered with top bloom from top crop but it ended up that I watered only with water and I'll wait for the next watering I'll already water with top bloom from top crop and let's see what these beautiful girls do, I was going to leave another time in vega another two weeks apparently i'm going to move so i don't know if i'm going to have much time left in this house so i'm going to take advantage of the time i have and already putting them to bloom

Jack herer still never popped. Wedding Cake growing the fastest out of the 3. Cherry Cola in second place and Bruce Banner in third

Chop time for the dry ice has came this girl got so fat even with the scrogg she fell over. When i cut her down and flipped her from the dirt was so heavy though wrist was gana break. Just like all my others i dont do wet weigh in. I dont do a wet trim so i can have that slowwwwww dry time. When flowers are dry and teimmed will do a weigh in. My dry prosses is slow trim fan leaves let hang in 60°f and 60% rh for 12 - 14 days then do a trim for smoke. This girl is amazing has a steong caryophyllene smell that overpowers everything! Very curious how that turns out. Buds are

12/17 Week 12 Wow Layla made to week 12 but this will be her last, trics are ready and just letting her dry out before harvest. My wife says hers buds remind of Cleopatra from the Adams family... have to remember that new year for Halloween Maggie - one gal @6.4PH + 12ml Peak Soul finisher maybe her last feeding as hair growth is slowing so looks like next week-ish Those buds are really getting thick and heavy had to tighten up the support a bit. 12/19 HARVEST DAY LAYLA Pics up top wet yield 578 grams am happy Into the dry boxes (took two) for a few days UPDATE**** Dry weight 219 grams 12/20 Mag gets another feed still building buds same PH and PK as before. 12/21 Bud production slowing even after the feed so thats all for Maggie, just getting her preped from her on.

FERMAKOR BARREL MIX – BASE IN USE (Testing on the Fantasy Feast girl we pulled out of another diary https://growdiaries.com/diaries/274722-grow-journal-by-yan402 ) (Urea & Micros on the way — first week running without them) 🍶💧🍶💧🍶💧🍶💧🍶 💧 30 L Barrel – Current Working Mix 🍶💧🍶💧🍶💧🍶💧🍶 Step 1 – Calcium Nitrate (Part A) 7 L warm water (~35–40 °C) → added 45 g Calcinit, stirred until fully clear. That’s the calcium + nitrogen backbone for the feed. Step 2 – FERMAKOR PK Base (Part B) 15 L water in the main barrel → added 30 ml FERMAKOR PK Concentrate, mixed well. This forms the main P + K part of the formula. Step 3 – Combine Solutions Slowly poured the Calcinit mix into the barrel while stirring — no reaction, still crystal clear. That confirms the mix is stable and precipitation-free. 🌿 Step 4 – FPJ / FFJ Batch Added 30 ml homemade FPJ (fish + veg batch) ≈ 1 ml/L. Color shifted to a light-amber tone — looks alive and active. 🍋 Step 5 – Citric Acid Balance Added 1 tsp citric acid after everything was blended to fine-tune pH and help chelate micros later on. 📦 Step 6 – Top Up & Check Filled to the 30 L mark with plain water → pH tested with drops, showing yellow-green — roughly 5.8 – 6.0 range. Nice clean look, stable smell, no residue. 🧠 Current Status First day feeding the Fantasy Feast girl with this base mix. Too early to tell how she’ll react, but so far everything looks clean and balanced. Ca + N from Calcinit and P + K from FERMAKOR should be plenty for a gentle start. Citric + FPJ round it off nicely. We’ll see how she takes it over the next few days before deciding if she even needs the urea and micros. 💧 Current Base Ingredients (Active Mix) Warm Water ≈ 22 L total Calcinit 45 g → N + Ca foundation FERMAKOR PK Base 30 ml → P + K support Citric Acid 1 tsp → Chelation + pH balance FPJ / Fish Emulsion 30 ml → Organic enzyme booster Result: clean amber mix, mild and balanced. I’ll let this version run for a week before adding anything. 🌱💦🌱💦🌱💦🌱💦🌱💦🌱 Day to day tasks & actions 🌿 🌱💦🌱💦🌱💦🌱💦🌱💦🌱 19.10.25 VW26 – Fed 3l of #1 → 2l runoff 🍶💧🍶💧🍶💧🍶💧🍶 💧 Nutrients in 30 L #1 (Veg Strength) 🍶💧🍶💧🍶💧🍶💧🍶 💧 Calcium Nitrate (Calcinit / Nitcal): 45 g = 1.50 g/L → ≈ 225 ppm N + 150 ppm Ca 🍶 PK Concentrate (FERMAKOR Base): 30 ml = 1.00 ml/L → balanced 1 : 1 P : K support 💧 Home-made FFJ / FPJ (Fish + Veg Batch): 30 ml = 1.00 ml/L 🍶 Citric Acid (Chelation & pH Balance): 1 tsp (max) = 0.33 tsp/L → add only after checking pH 💧 Target pH: ≈ 5.8 – 6.0 (drop test – yellow-green zone) 📦 TOTAL: ≈ 105 ml / 45 g inputs per 30 L (≈ 3.5 ml / g per L active mix) 🍶💧🍶💧🍶💧🍶💧🍶

They stretched so much i almost ran outta room for my light lol. They loving their feed and doing really well so far i think.

The aromas are starting to show themselves. I can’t even begin to describe them. Give me a couple more days and I’ll come up with my best educated answer. Thanks for checking out my grow series. Only about 4 more weeks before the harvest. Beyond excited.

Week 11 (10-4 to 16-4) 10-4 Temperature: 24.4 degrees (lights on) 21.1 degrees (lights off) Humidity: 60% (highest) 52% (lowest) No pictures. Added 10L to the reservoir, and turned it on for a couple of minutes. 11-4 Temperature: 24.4 degrees (lights on) 21 degrees (lights off) Humidity: 61% (highest) 52% (lowest) 12-4 Temperature: 25.5 degrees (lights on) 22 degrees (lights off) Humidity: 65% (highest) 57% (lowest) Turned the reservoir on for a couple of minutes. 13-4 Temperature: 26.5 degrees (lights on) 23 degrees (lights off) Humidity: 65% (highest) 56% (lowest) 14-4 Temperature: 26.4 degrees (lights on) 22.1 degrees (lights off) Humidity: 64% (highest) 45% (lowest) Turned the reservoir on for a couple of minutes. The reservoir is almost empty, there is 850 ml left. 15-4 Temperature: 24.4 degrees (lights on) 20 degrees (lights off) Humidity: 59% (highest) 49% (lowest) No pictures. 16-4 Temperature: 23.5 degrees (lights on) 19.5 degrees (lights off) Humidity: 60% (highest) 53% (lowest) Today i defoliated both plants heavily for the last time, you can say i did a method called: schwazzing. Dont know why but while i was defoliating the Chemdog smelled a little bit like soap haha. Turned on the reservoir for a couple of minutes. (Till the AutoPots are full and the valve closes) Rised the pots aswell, so the canopy is very even. I let them recover from the heavy defoliation i did, and next week i will slowly increase the light's strength. (Now still at 50% 50cm)

Day 79 - Added 7 mL of CalMag Micro Grow and Bloom. Added 7 mL of each additive. PPM is 706. Day 81- Using noticeably less water now. Checked PPM 475. In moving the plant to water, a small branch broke. Trichomes are mostly clear. Started to dry it as a tester for rest of the plant. It takes 7 days for me to dry the tester at 70F and 40RH. Not ideal temp but that is how it goes. Day 82 - Might have seen first amber trichs Day 83 - Added 10 mL of Overdrive. PPM is 430. Trichs are mostly cloudy. Hairs are 80% orange. Branches are leaning from the weight. Day 86 - Added 5 mL of CalMag Micro Grow and Bloom. Added 5 mL of each additive. PPM is 588.

🌱 Week 1: The Journey Begins! 🌟 Hey Grow Fam! 🙌 We’re off to an epic start with our TrolMaster adventure, and I’m already feeling the love for the setup, the seeds, and the growth happening in the room! So, let’s dive right in and get into the details of this exciting week! 🌿 Germination Update: Our first Gorilla Melon seed from Fast Buds didn’t sprout, but no worries—round two was a success! 🦍🍈 The second seed has germinated and is looking full of potential. I’m throwing in a Sweet Seeds Papaya Zoap into the germination station too, so we’re keeping this exciting lineup going strong! Germination is such a key part of the journey, and having a healthy start is what it’s all about. 🔧 Room Build & TrolMaster Setup: The build is coming along beautifully, and I gotta say, the TrolMaster system is blowing my mind! Everything’s under control like magic 🎩✨, and the TM+ app? Wow, just wow. I mean, I can literally be in the bathroom and still keep an eye on the plants—check all the metrics, adjust settings, and fine-tune what I need, all from my phone! 😂💧 This level of control is next level. I’m loving how smooth and seamless it makes managing the room. The gear is just unreal, and seeing it all come together is truly something special. 🌱 Nutrition Talk: As for feeding, we’re starting light but smart! I’ve begun with 0.15ml of Regulator and 0.25ml of Startbooster per liter for now. I always believe in starting easy and ramping up as the plants develop. These early stages are crucial—balance is everything. For the time being, I feel this is more than enough to keep the babies happy and healthy. 🌿💧 The Regulator is working wonders in maintaining plant structure and health, while the Startbooster is fueling the early root and vegetative growth, laying down a solid foundation for the weeks to come. It’s about getting it right from the start—too much too early can be a killer. Keeping it steady with precision, that’s the goal! Big Shout-Outs: To the amazing team at @TrolMaster, @Fast_Buds, @Sweet_Seeds, @AptusHolland, and all the incredible sponsors—I’m beyond grateful for the support! 💚 And to my GrowDiaries fam and followers, you guys make this journey what it is—thank you for the love, and I’m so honored to have you along for this ride. 🙏 We’re just getting started, and I can’t wait to show you what’s next. Stay tuned for more updates, epic builds, gear reviews, and plenty of insight. Don’t forget to follow me on GrowDiaries, YouTube, and IG for exclusive content, and let’s make this grow the best one yet! 🌿🔥 Growers Love to All 💚💚💚 P.S.- A deep dive into the Full Spectrum Quantum Sensor (MBS-PAR): The Full Spectrum Quantum Sensor (MBS-PAR) is an essential tool for any serious grower looking to optimize their light environment. This sensor measures photosynthetically active radiation (PAR), which refers to the spectrum of light that plants actually use for photosynthesis—typically between 400 and 700 nanometers and more depending . What makes the MBS-PAR sensor special is its full spectrum capability, meaning it accurately detects not just visible light but also far-red and UV light—which are crucial for maximizing plant growth, development, and flowering. With this tool, I can monitor the exact intensity of light my plants are receiving, making sure they’re getting the optimal levels for every stage of growth. By using this sensor in my grow room, I’ll be able to ensure that the light distribution is uniform across the canopy. Plus, it allows me to fine-tune the light output from my ThinkGrow LED setup, ensuring my plants are thriving under the best conditions. Whether it’s increasing light during the vegetative phase or fine-tuning it for flowering, the MBS-PAR sensor helps me keep everything on point. And the best part? I can monitor it all through the TrolMaster app, ensuring I can make adjustments whenever needed—even if I’m not in the grow room! This level of precision means healthier plants, better yields, and maximum efficiency. It’s a game-changer for taking the guesswork out of lighting and getting closer to growing perfection! 🌱💡 Growers Love to All 💚💚💚

Week 4 and week 5 dusted the short one I prefer rhat is starting week 4 with Fruitwalker Daddy Dust