Well, the Grandaddy black hermed on me in the beginning of week 7 flower. Separated her immediately and did a flush bringing the ppm down from over 2k to around 500. Two days later she was harvested. A little blown she didn't finish up how I wanted her to. 2 more weeks she would of been ready. Trichomes were 5% amber 70% cloudy 25% clear.

I've no idea what is wrong with this plant. It's like it's diseased, all the leaves are wrinkled. One leave has decided to only grown on one side? Perhaps it had an argument. I've moved the light away but it's not looking good so far.

Ciclo molto soddisfacente. Terps fortissimi e tendenti alle californiane. Super genetica!! In House Genetics una fottuta garanzia!!! Grandi breeders.

Week 10, so from today I stopped watering the Gelato Cookie D'ohpe and on Saturday no more light as well. Sunday is harvest day finally. Not much changed, I raised up the water with 25ml so the Purple Punch gets 200ml 2 x a day. That's all, since last week I started giving 13 hours darkness and 11 hours light and from Monday will be 12/12 after I harvested the Gelato Cookie D'ohpe and I can use the tent only for her. Fertilization will happen on the same days. Sunday fun day, Gelato Cookie D'ohpe is harvested. Purple Punch left alone. From tomorrow I will switch the light schedule 12/12. End of the week Purple Punch is 43 cm.

Into flower we go and so far she looks really damn fine! I keep her very low whit lst because my grow space doesn’t allow high plants right now 😂 But I love lst, it gives me time to sit beside my tent and just play with my girls 😂

🌱 Germination Journey with Terpyz Mutant Mentha de Croco 🌱 Hey Grow Fam! Today kicks off an exciting adventure with Terpyz Mutant Mentha de Croco genetics. I’ve got 10 regular seeds ready to sprout, and I’m looking forward to discovering some beautiful female phenotypes—and maybe even a standout male for potential future breeding. It’s been a while since I’ve worked with regular seeds, so I’m thrilled to dive in! Germination Process Overview: Here’s a step-by-step rundown of the germination setup and process, with a special focus on the equipment and nutrients that are helping these seeds thrive right from the start. Step 1: TheCannaKan Germination Pod 🌱 For germination, I rely on TheCannaKan—a device I’ve come to love and trust. It’s designed to create the perfect microclimate for seed germination, and within just 24 hours, the seeds started showing signs of life. By the 32-hour mark, they were all ready to be transferred to the next stage! I can’t recommend this gadget enough for anyone serious about getting strong, early growth from their seeds. • Why TheCannaKan? • Humidity Control: Ensures seeds stay hydrated without oversaturation. • Stable Temperature: Maintains an even temperature around the seeds, so there’s no shock or stalling. • Enhanced Oxygenation: Keeps fresh air circulating, helping prevent mold and ensuring seeds don’t suffocate. Step 2: Transfer to Root Riots & Aptus Holland Supplements 💧 Once the seeds were sprouted, I transferred them into Root Riots, known for their excellent water retention and structure that encourages strong root growth. Root Riots also have a pH-balanced, spongy texture that makes it easy for roots to penetrate, promoting sturdy, healthy root systems. At this stage, I started using Aptus Holland’s Regulator and Startbooster at 1ml/L each. Here’s why I chose these products for early growth: • Aptus Regulator (1ml/L): Helps strengthen the plants against environmental stresses by supporting cell wall structure. It’s a fantastic choice for giving young seedlings an early boost in resilience. • Aptus Startbooster (1ml/L): This product provides essential microbes and nutrients that stimulate root growth and early plant vigor. Especially for regular seeds, the early root development makes a noticeable difference in later growth stages. Step 3: Lighting with Future of Grow (FOG) LED at 200 PPFD 💡 For lighting, I’m using a Future of Grow (FOG) 600W LED. For the germination stage, I’ve dimmed it to around 200 PPFD (photosynthetic photon flux density), which provides just enough light for healthy, strong seedling growth without overwhelming them. • Why Low Intensity? • 200 PPFD ensures that young plants aren’t exposed to too much light, which could cause stress or stunting. This level of intensity is perfect for encouraging healthy development without risking “stretching.” • The FOG LED provides a balanced spectrum tailored to plant growth, setting up these young sprouts for success as they grow. Step 4: Environmental Control with TrolMaster Tent X Controller 📲 For monitoring and control, I’m using the TrolMaster Tent X Controller, which lets me dial in every aspect of the environment to make sure these little ones have the perfect conditions for germination and early growth. • TrolMaster Benefits: • Precision Control: Adjust temperature, humidity, and lighting all in one place. • Notifications: Sends updates in real-time to my device, so I can make adjustments as needed without being physically present. • Consistency: Maintains stable conditions around the clock, reducing stress on seedlings and ensuring they’re thriving. Grow Tips & Reflections: Germination is one of the most crucial stages in a plant’s lifecycle. Starting with strong genetics like Terpyz Mutant Mentha de Croco, combined with a solid germination setup and the right nutrients, creates the foundation for a successful grow. 💡 Quick Tips for Fellow Growers: • Hydration Balance: Don’t oversaturate! Moisture levels should be high enough for the seeds to sprout but not so wet that they drown. • Light Management: A low PPFD for young seedlings prevents stretch and keeps nodes tight, preparing them for a healthy vegetative phase. • Environment Consistency: Use a reliable controller like the TrolMaster Tent X to manage your settings, and consider monitoring tools for real-time adjustments. Shout Outs to the Community: Big thanks to Terpyz Genetics for these incredible seeds, Aptus Holland for their top-notch nutrients, Future of Grow for the stellar LED lights, and TrolMaster for the amazing controller. Also, shout out to all of you in the growing community—you make this journey exciting and filled with endless learning. Let’s keep growing and sharing together! That’s it for the germination update! Next up, I’ll be monitoring growth closely to identify strong females (and maybe a standout male for breeding). Stay tuned for updates on our Mutant Mentha de Croco adventure—this is just the beginning! Genetics - Mentha De Croco https://terpyz.eu/products/menta-de-croco-fern-type?_pos=1&_sid=e9237cbcb&_ss=r DogDoctorOfficial Discount Codes @ terpyz.eu - DOCTOR 15% off Nutrition - @aptusholland https://aptus-holland.com/ Led Power @ F.O.G. Future Of Grow https://www.thefuturofgrow.com/en/online-store/BLACK-SERIES-600-p489093171 Controls @ TrolMaster https://www.trolmaster.eu/tent-x As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciloved and i fell honored with you all in my life With true love comes happiness Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so Growers Love To you All 💚

week intel: everything is perfect! stresses : just a little E.C stress around 1.7 once a week feeding: i feed them 3 times this week with this order : day 1 : i feed them heavy with silicate +base nutrients(calcium & micros + Bloom) about 818 ppm - 1.7 e.c to cause a little stress. day 3 : i feed them low dose of Feeding Booster + Karbo Boost around 382 ppm - 0.7 e.c to let them recover a little but not fully recover still a little stress will caused. day 5 : i feed them with low dose of Top-Max + B-52 around 250 ppm - 0.5 e.c to let them recover the stresses to get ready for another stress next week. guide of the week : know your plant tolerance limit of E.C stress once you saw the very very little yellowing on tips of leaves , that's the sign to don't go further , never reach that limit if you want a high quality buds, in my case tolerance is 1.8 and i'll reach to that level only once a week to cause precision stress , love your plants and have a happy growing!

On day 1 I changed out my reservoir, and added my bloom nutes, adjusted my light schedule to 12/12 and defoliated the plants. I adjusted the reservoirs PH to 6.1 My hope is that by flipping this cultivar earlier than my last run, I will not run out of vertical space ;). On day 2 I adjusted my reservoirs PH down to 6.1. On day 3 the clawing is almost completely gone. I adjusted the reservoirs PH down to 6.1. On day 4 the reservoir's PH is at 6.1. I defoliated the plants removing anything blocking lower growth to increase light and air penetration of my mains. On day 5 the reservoirs PH is 6.1. On day 6 I adjusted the PH of the reservoir up from 6.0 to 6.3. I will let the PH drift between 6.1-6.3. on day 7 the reservoirs PH is 6.2. I lowered the light intensity from 100% to 85% to give the top of my plant canopy an average PPFD of 700-1000. I plan to reduce the intensity as the plants continue to stretch to keep them in the 800-1000 PPFD range. I just got my first quantum par sensor and I'm really loving the new data it gives me to optimize my lighting.

Report Tag 22 : Willkommen in der dritten Woche 🌿 Es ist der 15 Tag nach Bildung der ersten zackigen Blätter 🌿 Da ich die Tage erst mit einer Nährlösung gegossen habe, bleiben die Gartenwerkzeuge heute alle an ihrem Platz. Höhe der Pflanzen : Purple Haze Auto 11,5 cm Frostbanger Auto 12,5 cm Z-UP 13 cm Report Tag 23 : 🌿16🌿 Heute kam der UPS Wagen und hat mir neue Souvenirs gebracht. Flotte Knoppen (ruhrpottisch für FastBuds) selbstverständlich und dabei waren auch Sticker der drei Strains. Natürlich dürfen die Sticker in dem Grow Report nicht fehlen 😃 Auch heute gibt es nichts zu tun, außer das Wetter draußen zu genießen ☀️ Die Mädels sind nun : Purple Haze Auto 12,5 cm Frostbanger Auto 13 cm Z-UP Auto 13 cm Report Tag 24 : Es ist Wachstumstag Nummer 17 🌿 Heute ist nichts mit den Pflanzen geplant. Tägliches Update über die Höhe der Pflanzen gibt es trotzdem : Frostbanger Auto 14 cm Purple Haze Auto 13,5 cm Z-UP Auto 14 cm Report Tag 25 : 18.Wachstumstag 🌿 Alle Pflanzen sind wieder gleich groß. Z-UP Auto 14,5 cm Frostbanger Auto 14,5 cm Purple Haze Auto 14,5 cm Melde mich morgen mit einem ausführlichen Bericht morgen steht einiges an. Report Tag 26 : Seid gegrüßt zu Wachstumstag 19 🌿 Heute war ein aufregender Tag und ich habe mich tatsächlich getraut meine erste Autoflower zu toppen. Es war ein langes hin und her ob, wann und welche Pflanze ich toppen soll. Dass ich eine Pflanze toppen werde, davon haben mich Sebastian und Bernie von FastBuds mich nach ihren professionellen Antworten in ihren letzten deutschen Livestream überzeugt. Meine erste Wahl wäre die Z-UP Auto gewesen, da ich davon noch einen weiteren Samen habe. Doch als ich heute das Zelt öffnete und sie mir anschaute entdeckte ich schon die ersten weißen Haare an der Z-UP Auto und somit ist es mir dann doch zu riskant. Die Purple Haze Auto wird nicht getoppt da sie eh schon einen kurzen Lebenszyklus hat und ich auf ein frohes Farbenspiel hoffe. Somit blieb mir nur noch die Frostbanger Auto und Schnipp, Schnapp der Kopf ist ab ✂️🌿 Jede Pflanze wurde mit 1,5 Liter Nährstofflösung gegossen. ( 1,5 Liter Chlorfreies Wasser + 1,5 g Bactrex + 3 ml Orgatrex + 2ml Bio PK 5-8 ) Zu guter Letzt wurden alle drei Damen noch mit 5 ml / Liter Biotabs Boom Boom Spray eingesprüht. Die Größe aller Pflanzen beträgt 15 cm Frostbanger Auto 15 cm Purple Haze Auto 15 cm Z-UP Auto 15 cm Bis morgen 👋🏼 Report Tag 27 : Halli, Hallo ! Wachstumstag 20 🌿 Zuallererst die Frostbanger Auto hat das Topping gut überstanden und zeigt keine Anzeichen von Stress 🙏🏼 Das war auch das wichtigste was zu berichten gibt. Alle drei wachsen fröhlich vor sich hin und werden mit jedem Tag etwas schöner 💚 Frostbanger Auto 15 cm Purple Haze Auto 15,5 cm Z-UP Auto 15,5 cm Schönen Sonntag euch allen 👋🏼 Report Tag 28 : Ich wünsche euch einen schönen Wochenstart! Es ist der 21. Wachstumstag 🌿 Die Größen der einzelnen Pflanzen : Z-UP Auto 16 cm Frostbanger Auto 16 cm Purple Haze Auto 16 cm Hoffe ihr seit alle zufrieden mit euren Gärten ! Bis nächste Woche 🌿 Ich hoffe es gefällt, euch was ihr zu sehen und lesen meinerseits bekommt. Ich bin dankbar für jedes Kommentar, sei es eine Anregung, eine Kritik, oder eine Frage.

22/08/18 - everything’s looking great I’m sure they will be finished stretching sometime this week and also should be getting an additional LED to add to the tent by the end of the week. Also started to lolly pop each plant took about a 1/4 of the leaves etc so far will see how it reacts to this to see if I can continue to 1/3. 24/08/18 - lookin good 48hr after I trimmed the bottom branches/big ass fan leaves in the shade looking miserable so i had to chop em. Still waiting on my extra led in the post.

it's been a very good week 💚 I feel a little bad for this plant cause it's getting a little squished by the other two but I'm ddfinetly not complaining😅🌱. started giving 5l of water per plant every 5 days. runoff shows that they are not over or under fed :) and pH is about 6.3. very very very happy with this grow 💚 Barney's farm amazing as always

Ok

Week 8 – The Lemon OGs keep packing on the weight 🍋🔥 Another week down and these ladies are just getting chunkier and chunkier. Buds are swelling nicely, pistils are still mostly bright, and the frost is spreading like powdered sugar on everything. Trichomes are stacking, smell is turning into that sweet citrus haze punch that makes you wanna just stand there and breathe it in. Feed for the week was simple and on point – keeping them happy without overcomplicating things. I’m pushing them a bit before my upcoming vacation, making sure they’ve got everything they need to finish strong while I’m gone. Lights are still blasting 480W full power from the two KingBrite P55s, and they’re soaking it all up without complaint. Temps max out around 28°C, humidity is steady, and the canopy is looking even. A few lower leaves are fading, which is perfect for this stage. Some branches already needed a bit of support – fat cola problems, amigos 😎👌🏼 If they keep going like this, we’re looking at some heavy jars after chop. But for now, it’s all about letting them do their thing. 🌿💚 OnlyBuds

Plant was healthy and yet enough big to switch to flowering 12/12 I am treating her good, I upgraded her in the superior double room all for her 🤪 I love how she grows 💪🏻 Good luck to all growers 💚

the girl remains firm I aplied lollipopping and defoliation at the day 21

62 días desde el cambio a 12/12. Esta semana, el lunes 16, fue la ultima semana con abonos, y desde el miercoles he estado regando con Flawless Finish (llevo 3 riegos, miércoles 18, viernes 20, domingo 22) para limpiar las raíces. Las plantas han respondido bien, se empezaron a decolorar las hojas tomando algunos tintes bien bonitos. No estoy apurado y creo que les voy a dar otra semana más. Buen cultivo a todos.

Day 85. First Diesel down. This was the most Colourfull plant in all year, sad that it was triggered by light shock, still she was always praying, drinking water fast and loved life. Smells so fruity and fresh. Day 86. Other run pushes me to chop them earlier, but taste qualities i will get anyway, so Last to Chop is choped ;)

This week marks the present day at the time of writing since i started the journal on here on oct 6th. Plant A also started to purple up real good. Plant B overall is a few days ahead in flower production i would say, Plant A also stretched for a day or so more - but im happy as to how absolutely even and similiar they grow. Really been an absolute blast and treat so far. Hats off to fastbuds! I stayed at 2.5L watering dosages, Ramping up Grow and Activera to 3 ml/L according to the biobizz schedule. PH in stays at 6,5, Drain stays at 6.1 for both plants. Im happy. They do be looking absolutely gorgeous in my eyes! i kept and keep on lightly defoliating them on watering days, sometimes also in between, but now mainly the small leaves of the bushwork inside that dont receive any light at all. Also, i got a new webcam for better quality timelapse shenanigans. yay! PPFD now sits at around 1000.