First off I just want to say for some reason it’s not letting me change the right temperatures on my diaries ! Each time when I put it in they stay at 50. My day air stays 75 degrees an , night degrees is 70 ! Today is day 58 for all these ladies! This week has been really great ! Girls really progressed a lot , especially for one the Forbiddin Runtz, looks like is gonna finish up in a week or 2 ! Other then that they are coming along well! Keep those eyes peeled for next week! Cheers😶‍🌫️💨💨💨💨

Just flushing the girls this week, waiting for most trichomes to go cloudy instead of clear. Ive now switched the lights off for 36/48 hours and will harvest in the next couple of days :))

Bonjour a tous les padawans et les maîtres jedis Pour cette semaine 4 je surveille comme à mon habitude hygrométrie et arrosage. Je peaufine mon LST en stressant ma plante le moins possible. Je combine mon LST avec un pincage d'Apex cela me permettra d'avoir une canopé plus homogène donc une meilleure pénétration lumineuse et par conséquent un meilleur rendement. Petit rappel sur le pincage d'Apex: Le pinçage des plantes de cannabis Proche de la taille d’apex sur le principe, cette technique possède cependant plusieurs avantages, le principal étant de conserver le gros bud central de la plante, d’une production et qualité maximale. Pinçage des plantes de cannabis Le pinçage d’apex (tête de la plante) consiste simplement à pincer délicatement la tige du dernier étage de la plante, entre le pouce et l’index, jusqu’à sentir la fibre s’écraser sous les doigts avec un petit bruit critch caractéristique. Si l’espace disponible sur la tige du dernier étage ne permet pas d’y placer confortablement ses doigts, il faudra plutôt pincer l’étage du dessous. Le pinçage ralentira fortement la croissance verticale de la plante, tout en stimulant le développement des branches secondaires, donnant ainsi à la plante une forme de buisson. La plante mettra quelques jours à réparer ce pinçage, formant un nœud à cet endroit, et poursuivra ensuite sa croissance de façon normale. Le pinçage peut alors être répété si nécessaire, sur l’étage suivant nouvellement formé, ainsi que sur les éventuelles branches secondaires qui pourraient dépasser l’apex. Le pinçage est donc une excellente technique pour avoir une belle canopée uniforme de type marée verte. En pinçant régulièrement l’apex des plus grandes plantes de votre espace, durant la croissance et en début de floraison (stretch), vous obtiendrez ainsi facilement des plantes de hauteur homogène en pleine floraison, ce qui facilitera la culture et augmentera la production finale, surtout si vous cultivez simultanément de multiples variétés de marijuana. Avec un peu d’habitude le pinçage pourra être réalisé aussi rapidement qu’efficacement. En cas de pinçage trop violent qui se traduirait par un apex arraché, cela produira simplement les mêmes résultats qu’une taille classique de l’apex, ce qui ne sera donc pas dramatique. Que la force soit avec vous💪

Ordered a scale the other day so should have some more numbers tomorrow! Not going to sample anything until I get the scale, then I'll update with some more details.

9/17 Didn't know this was a new week or I would've taken more pictures. I'm glad I took those two plants. As it dries and I start to trim I could see where it could've turned to rot real easy. It rained enough last night to soak all the girls. The two bottoms I harvest look like the have pm on them. If so I'll wash it or through it in the concentrate bag. Found a few colas a dropped which will go in the concentrate bag. Scoping the toasted toffy and the event horizon and the both look AMAZING! I've scoped the others and I'm extremely impressed. They may be difficult to grow strains but they have high cannabinoid content. The sherb cream pie has really come to life and turned totally purple with beautiful flowers. The girl in the 50 has several soda can sized buds. I hope this weather holds up. I don't like flowers this size getting wet. The sativa leaning hydrid us the only one I may have trouble with. It's only in a 10 gal but it's enormous! If needed I coyld bring it inside at night. The buds look like cat tails. I'm used to growing indica dominant strains. Plant us super healthy though. I'll be intrigued jail for a while and I've gotta make contact with whoever is going to do my extracts. I'll keep this updated. It's a lot of work bur it's worth it. 9/18 WATERED EVERYTHING I GALLON BUT THE BOTTOMS OF THE 2ND EV AND THE TT WHICH EACH GOT A HALF. Since harvest I've noticed some pm spring up on the toasted toffy. Looking at the other event horizon through a scope the trichs are all milky with some amber. I'm just waiting for A LITTLE more amber. And for me to have time and or room. I decided to harvest the tops and majority of one of my event horizon and toasted toffy. Today during an inspection I found a couple grey mold branches and some botrytis on my big GMO on the back. This plant is done. It's by far the furyhest ahead. Septoria effected the yield a little but pistols were retracted and amber was at like 10%. I thought about it and I watched the plant next to it with the pm have a branch I supported just "slough off". Right in my face. I figured if there was a sign tjis was it. I cut that rot off and put the buds from the branch in a bag and froze them then I went around and harvested the limbs on the other plant that were furyhest along. I took about half of it. I could've taken more and maybe I should've but I'm tired. I also noticed a couple spots of grey mold on the plant in the 50. All the leaves were falling off. I finally scoped it and it was right whetr I wanted it to be. Looking at the colors I'm glad I spent so much time the past few days. That one I hung whole. The sherb cream pie has something eating the fresy shoots (probably ear wigs. But the buds are fattening and the trichs aren't quite there. I'm going to let the rest of this stuff go ad long as possible. With the exception of the other event horizon. I finally tried it. It's fucking killer. I could take that plant now. The only reason I'm not is because I have to much work on my husband's as is. I'll do some videos amd pictures but I'm tired as fuck. Got to try event horizon. Very fucking impressed! 9/19 The past 3 days I've been working 5 a.m. to dark. I went back and harvested the bottoms of the toasted toffy and event horizon 1. After injury from harvest they contracted wpm. I used this as a learning experience and put some away in the freezer for concentrates and used a peroxide and water bucket. That's what kills the p.m. anyway. I hung them and they spun in the wind. I blew them lightly with a leaf blower before putting them ok strings I had previously setup with a fan in front of it. I kicked ass today. Toasted toffy got sampled and did NOT disappoint. I had it in a jar though and it was green so I'm not counting this. I do have some dry. I have indoor left too. Like in the video that one GMO looks like it's fucking dying or something. I'd rather cut it and use it for concentrates if it effects my healthy plants. I just checked on that plant in the 50 I hung. It looks amazing under the scope and smells better. Decisions, decisions. I do have a few calls I should make sooner rather than later. We are supposed to be getting rain. 9/20 The past 3 days have been hard. The wife's medical stuff is acting up and I had to tend to harvesting a few. My whole body hurts. I even did my first bud wash yesterday! The ev and tt I took and left some buds on ended up covered in pm. So I decided fuck it and tried bud washing. I also froze some for extracts. Speaking of which I need to male contact with whoever I'm going with this year because I think I've reached the point of diminishing returns on that dieing GMO. When it comes to grey mold and botrytis I don't fuck around. Winds are really high today. Putting the scope to the sherb pie is making me second guess myself too. Oh well. It's not going to rain today. And if needed I can move them in the barn. If I get ahold of Mt processor I'll chop that GMO and bring it right there. The other thing is that I've got tons of weed and a lot of its hanging so I've gotta find someone that will do a batch of live rosin then like a elbow of dry. This is the best part of the year. We'll It's supposed to be. Cutting down good plants us bittersweet. I don't mind chopping that one gmo a little early though because it's close to hitting the point of no return. That little sativa dominant hybrid in the ten is HUGE! The buds are swelling like crazy too. It's got a COUPLE septoria spots but this thing is resilient and easy to move around. This will finish perfectly. So far I'm happy with what I have. I'm GRATEFUL. The two September plants I tried were GREAT. A 90/10 and an 80/20 and they both suprised me and got me exactly whete I wanted to be. I'll keep things updated. I did a video I'll upload. 9/21 Weather is still great and the buds don't even seem wet in the morning. The thing is is that something (rot or ear wigs probably both) have stripped lower interior branches. In some cases stripping them ENTIRELY or chewing the stem right off. It wasnt happening to my favorite GMO or the one in the 30 and the like on in the ten. The Sherb pie I noticed grey mold on 3 different branches. Last time I checked trichs it wasn't ready but I've got to get a handle on this mold/pests or it's going to he taken a little early. We have incliment weather coming Wednesday I think. I'll bring the 10 inside and if I have to I'll bring that perfect GMO in as well. I'm going to scope everything again today. I called a bunch of extractors for prices. I was going to do fresh rosin and just yank and drive but that is looking to be harder. I can get badder made CHEAP from a reputable lab. I think I'll do that. They prefer dry and that way I could through what's left from last year in there. I have this other one GMO that I've had the same issues with. I'm sick of removing bud rot or having to cut interior branches off due to pm. Tried toasted toffy and it was fucking amazing. I'm planning on trimmingvthe ev and if I finish I can bring the other one in. It's done. It's not getting any bigger. Trichs aren't changing. That GMO I am going to scope when I get home and it will be coming down in the next couple days. Otherwise I'll end up with half of what's there. The GMO I took the tops from is finishing up too. If I scope that and it looks decent and I have the time I'll take the remainder. I'm leaning towards doing at least a lb dry for extracts. I've got some frozen. I've got some hanging and most is still in the ground. I sleep on all major decisions. However, I know getting my nice buds soaked when I'm already losing shit to budrot and grey mold isn't the smartest thing. I'll probably take what I can and bring the others inside to keep them safe. I didn't think I'd have this much quantity. I knew quality would be good but this isn't a bad year quantity wise either. I'll keep this updated. 9/22 Busy as hell! Rain coming Tuesday. After a final check of the scope and the flowers and I took the GMO that all the leaves had fallen off of. That plant is going straight to extracts with the one in the thirty. I also "finished" harvesting that GMO that was furthest along. Trichs were getting amber. Been in trim jail. Was going to take the Sherb Pie but I'm not seeing amber yet. I did have to cut off some branches that had rotted. I'll keep an eye on it. It will come down when it's ready. It just sucks losing little bits of it. My favorite GMO is sooooo close to perfect. I should just take it but I'll wait. If we get rain I'll bring that and the sativa looking one in the ten is the barn. Back to work now. Before I forget what strain is what lol. 9/23 Still busy as fuck. I chopped the other event horizon amd hung it whole. It's DONE and it doesn't need to go through the rain storm. I also took the majority of the GMO early pheno. What's left will get plucked off and used for extracts. The big one in the 50 is getting dry. I have finished the event horizon and I'm not "finished" with the toasted toffy but I have it in 5 gal buckets with a food grade lid so u can at least cure correctly. The gmo is still hanging. I'm wondering whether I should wait it out or chop. I'm gonna take care of what I have inside first and hope that shit doesn't eat my plants or that it doesn't rot off. That perfect GMO has one branch with some grey mold. I might cut it off. I'll keep this

End if week 5. A little tip burn but no problem. She is looking stacked and ready! No smell really. 100% rooted out this 2.5 gallon bucket.

So everything took off in flower, I was super harsh with the defoliating which initially I regretted, but was surprised with how they packed out during the following weeks. In general it's impressive how hardy these plants are. Even the outdoor grows yielded some quality. Add some more nuets (overdrive and carbo load), before flushing about 14 days before harvest, next time I'll do this earlier and really the Runtz could have gone another week but my drying needs to happen in the same space as my growing for now. Apologies for the quality of image, I'm just using my phone and some bits I have to document, I collect records too, so expect weird noises lol. Build a rotating plat from a lazt susan I found, has been the best piece of kit added this season.

Loved the strawberry pie, it smells sooo fruity and delicious and it smokes amazing definitely will have to grow this strain again !! Thank you fastbuds

Me gusta hacer estos seguimientos y ver para atrás siempre si está creciendo o no y cómo lo viene haciendo día a día, la outlaw arranco mal, yo la pase de agua y de humedad porque era época de mucho frío y no calefaccionaba el ambiente, la planta fue desarrollando buenos tallos, musculosos, pero no ramificaba, si no le hacía una poda apical los laterales hubieran sido pobres, al resto de la planta en cuanto al olor y al sabor que tiene es realmente un 10 Para ver todos mis otros diarios https://growdiaries.com/grower/juanhaze-arg/diaries

Giorno 1 -(Special kush#1)

25/12 se realizo fertiriego a todas exepto a la que ya esta lista para cortar (a estanse le lavaron las raices y se mantiene con agua). Las plantas bienen bastante bien, un poco lentas respecto a lo que dice el fabricante.

------GENERAL COMMENT------ Flush time, within the end of this week is now flush time. To summary this week i just kept on my feeding habits, Water with base > Water with boosters, alternating Recharge. My led seams to be crashing a bit, the colors are not stable as is possible to see in the timelapse. Trichomes are mostly cloudy, with a slight amber. 9 weeks flowering time will be exact, just need time to flush, they are maturing fast fast, hairs are getting orange in a blink. ------SM.BB COMMENT------ The buds are very imponent and bulky, with a lot of resin, the smell is sweet and fruty with a bit of pine.

Hi, topman. On the week was added red clips for bending, also realise solution of 35% refueling nutrients! So, looking, please>> Its has trichomes … I watch in full! They are have in second (AA rasty) too! And, they are semi full adaptation after transplant from 0,7l in 25l.

Best grow yet I’ve started my first grow here on growdiaries and thanks to the good buddies here I’ve been able to succeed in my adventures thank you everyone

09/02/2019 Week 2of flowering let the fun begin!

Cant wait to do her again next year wouldn't mind trying a indoor run on her as she flowers really fast for a sativa

Bud sites are getting ready now. I did a bit more LST and removed a few side shoots which never gonna make it due to lack of light. I replaced the light, under the TS 1000 she was praying all day long. On the previous run I had problems with the FC3000, it was turning itself off at random times. Mars Hydro was kindly sent me a replacement controller, so far it seems like this problem has been solved. However, I tried to use the app again and it’s still shite. 💩😂 So I just use the light in manual mode. Such a shame for the extra features I cannot use. For DLI I will use the following chart: AUTO FLOWER LED LIGHT INTENSITY Recommended LED PPF/PAR Values / DLI Based on 20 hrs. of light. Seedlings 150 - 200 umol / DLI 10.80 - 14.4 moles per day Veg up to 9" 450 umol / DLI 32.40 moles per day Early bloom 500 umol / DLI 36.00 moles per day Mid bloom 650 umol / DLI 46.80 moles per day Late bloom 750 umol / DLI 54.00 moles per day Ripen 400 umol / DLI 28.80 moles per day *** Use extreme caution going 700 umol or higher @ 20 hrs/day this could cause leaf burn*** The only difference is that I will keep this run in 18/6, so I ignore the PAR values above. IMO the best thing you can do is to read the leaves all the time and use the charts as a guidance.

Finally got the temps up to an average of 78°F with the lights on and things turned right around. Someone on here reccomended I try putting a small 250w heater inside the tent with a fan behind it and it worked so shootout to @lionsshare. I took the autos and clones out and put them in the other tent. I have to take cuts of everything in here in case there is something special. It's been non stop work. The video was taken on day 2 of flower. I gave them a 36 hour dark period as well so they should stretch a little more and I might throw a few more plants in if there is room. These 3 all look pretty good, they were germinated atleast a week after the other strains so 2 are a little smaller but one is growing at a rapid clip and caught up to the others. I'm prob most excited about these because the previous 2 I grew were elite. Cant go wrong with Ethos

SPONSORED DIARY===SPONSORED DIARY===SPONSORED DIARY This has been explosive in growth, both plants have put on some impressive growth. I feel the light being only 100w has contributed to some of the extra stretching between the nodes and this would not have happened under brighter settings. Added in some bokashi grain to the medium to help breakdown anything that maybe unavailable to the plants. everything is on course for success. It should be time for a top dressing of Acti-Sol in the next week., might use up whats left of my Gaia Green U•CANN line up as well. SPONSORED DIARY===SPONSORED DIARY===SPONSORED DIARY Big shout out to @SpiderFarmer for supplying the 2x2x5 Grow tent and The SF1000 100w LED light. I will be uploading all relevant photos of the products in the next week when they arrive, maybe do a little unboxing video. Who knows. A 2nd big shout out to Dr.Seeds for supplying the 3x5pac of seeds I will only be featuring two of the three strains in two separate diaries. You the users will get to decide what ones I grow. I have setup a Grow Question on each diary to vote for your strain of choice for that diary. https://growdiaries.com/grow-questions/47600-drseeds-1-vote-what-i-grow "Diary #1" https://growdiaries.com/grow-questions/47600-drseeds-1-vote-what-i-grow "Diary #2" Cast your vote for each diary. Thought I would add in the relevant links if you wanted to read up on any of the products that will be officially featured in this grow. https://www.spider-farmer.com/ https://growdiaries.com/grow-lights/spider-farmer (+) https://www.spider-farmer.com/products/sf-1000-led-grow-light/ https://growdiaries.com/grow-tents/spider-farmer (+) https://www.spider-farmer.com/products/sf-2-x2-indoor-grow-tent-hydroponic-home-plant-reflective-aluminum-oxford-cloth/ https://drseeds.net/ https://growdiaries.com/seedbank/dr-seeds (+) https://drseeds.net/product/granddaddy-purple-autoflowering-cannabis-seeds/ (+) https://growdiaries.com/seedbank/dr-seeds/granddaddy-purple [Photoperiod not Autoflowering] https://drseeds.net/product/60-day-wonder-autoflowering-cannabis-seeds/ (+) https://growdiaries.com/seedbank/dr-seeds/60-day-wonder-autoflowering