Likes
6
Share
FC-E 4800 lamp , to view this lamp or any other marshydro product go to: https://instagram.com/marshydro_aliexpress?igshid=YmMyMTA2M2Y=
Likes
7
Share
Week 8 Here came fall. End of last week plant seemed hungry, the fade wasn't progressing as supposed so I gave her two nutes round with only water round in between them. I used bottled feeding: biobizz biobloom + top max (2ml each per liter), ghe ripen (2ml per liter), solved micronutrients and calmag (not mixed, one time one the next the other, 1-0,5 ml per lt). Solution EC was about 1,4, starting with 0,3 tap water. She reacted well to the feeding in my opinion. now the fade is progressing more naturally. I did observe that the plant under the less powerful COBS in the same tent are doing better then the ones under the sp250 wich has a higher par output, so I raised the light to 45-50cm from canopy. This had a positive effect on the plants imho. I'll stay a little bit further from the beginning in my next grow. I took a sample under the microscope to take some tricho pictures, they look beautifully clouded but the buds still has to ripen some 50% more. Based on that I think we are arriving to an end in 10-15 days max. Happy bottanic guys
Processing
Likes
45
Share
Hello growers! Week 13 is here, a little cal mag issue but i’m On it 👌🏻 I had some issues with the night temperatures, but I have fixed that with a heater in my grow room. Thanks to the people that pointed out that would slow the growth of the girls. But yeah other than that the buds are mad frosty and smelling super dank, i’m Just waiting for them to fatten up now 👌🏻 Good growing everyone!
Likes
128
Share
So this was my first ever Tiny Pot 👈 wasn't sure if I could even do it 🤔 But instead it was a blast , she grew even better then expected , so much so I may do another 👍 She was a hungry plant the hole cycle, figuring out her feeding became a great learning tool , I gained alot of experience growing this one 😀 I used rain water the hole grow , to which she required feeding daily , some day twice 👈 👉I added 4 straws in week 4 to help with air flow to the roots and it worked 💪 So check week 4 to see what I did 😀 👉 Big thanks to all my Growmies out there in GD land 👈 Much appreciated 🙏 Thanks To MarsHydro for the TS1000 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14👉 Every Week NutriNPK Grow 28-14-14👉 Weeks 2 & 3 NutriNPK Bloom 8-20-30👉 Weeks 4 to 8 NutriNPK Bloom Booster 0-52-34👉 Weeks 4 & 9
Likes
9
Share
@Headies
Follow
So this week after I gave it under nutrients I apparently gave it too much nitrogen while having a potassium deficiency. Shiney dark leaves, So i fixed that, but some didn't bounce back, and I tried nitrogen. I think they are doing pretty good considering everything I've put them through SO FAR. lol. Nutrients are NPK Raw's total lineup, follow their instructions at first, Fastbuds adjustments as of this week.
Likes
13
Share
@NanoLeaf
Follow
Started Training Late! Was on summer holiday for a week and only started training now. Above are the plants during training as well as a few hours after training. Autos are definitely more delicate and the two runts are growing slow but yet still showing some progress. Changed my bulbs back to the CMH set to 400w each (2) Also gave them a good amount of water as the FloraCaps aren’t covering the whole pot I felt like it was necessary to wet the entire grow medium well for a change. Some of them were a bit far along for training but I did the best I could. Also the Purple Lemonade and 2 other plants are showing signs of flowering.
Likes
34
Share
Buds are starting to get nice and juicy aswell as big. Im now looking for a few of those amber trichomes before i start the flush. The nuggs are super sticky and get stinkier by the day. Peace Charlie
Likes
99
Share
~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ ❤️💡🌱😽💨 2nd week for the Kannabia seedlings, everything is going well.. 1 of the 4 Kiss seedlings is growing slower than the rest, this may be the one that stays back when we choose our 3 but we've had late bloomers surprise us before so we're giving it another week before we make our decision.. all the seedlings began to lighten in color we use this as our indicator to feed, we use a soilless media fulltime and feeding this young isn't out of the norm for us..there's really not too much else to report, I'm really looking forward to up-potting the 3 keepers in a week or 2 and getting all these girls into the 4x4 under the FC-E6500 ❤️💡🌱...Thanks as always for dropping by and happy harvests everyone!! 👊😸 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_
Likes
7
Share
OK. Now it's getting tough. I actually did not think it was going toever be real ' work '.... but good gravy... this is hard on my new titanium knee!
Likes
29
Share
Hope you are well. Thanks for taking the time. Little main line defoliation to focus growth. ATP (adenosine triphosphate) is the primary energy carrier in cells, including plant cells. It powers various cellular activities like nutrient uptake, protein synthesis, and cell division. Without ATP, the plant's metabolic machinery would grind to a halt, regardless of the presence of nutrients, oxygen, or carbon. Nutrients, like nitrogen, phosphorus, and potassium, are essential for building plant tissues and various molecules. They are incorporated into proteins, nucleic acids, and other vital compounds. While crucial, their uptake and utilization rely on ATP-driven processes. Oxygen is vital for cellular respiration, a process that generates ATP. While plants can produce ATP through photosynthesis, oxygen is essential for maximizing ATP production in mitochondria through oxidative phosphorylation. Carbon is the backbone of all organic molecules, including carbohydrates synthesized during photosynthesis. It's the fundamental building block of plant structures and fuels. However, its incorporation into organic molecules is also ATP-dependent. We don't grow we facilitate energy conversion.
Processing
Likes
55
Share
@Max1973
Follow
Day 37 - Everything looks good.... they are drinking so much.... i built a bit more stable light setup, and i'll need to buy afew more plugs and stuff, to fill it out ...... i organised all the 2700k globes, ready to swap in..... still waiting on the exhaust fan, so i'll keep em in "grow" mode another week or 2 .... i'm vaping a leaf or 2, and drinking "green tea hot chocolates" .... it is so delicious in hot chocolate .... my health has picked up since starting the vape/drinks... the 21 thc/19 cbd is supa healthy ... Day 38 - Getting them ready for Flower, noticed they are lacking in nutrients, so i started em on the heavier dutch master gold flower nutrients. Day 40 - Added some pics. (they look droopy because they in night mode, just turned on lights for pic) - Started them on 12/12 flower, still working on getting all the lights, gear, and globes, for the right spectrum and amount of light.... atm got - 7x 2700k (click) , 2x 6400k (osram), + 60w light panel .... i'll go get some more gear today and hope to expand it to 10x 2700k , 2x 6400k ...... I put the exhaust filter fan on seperate power, so it doesn't go on/off with the timer, but stays on all the time.... it totally fixed up any odour problems, haha ....... Added some different pics for my light spectrum ... etc..... the outside winter temp is now at 40-60oF (5-15oC) so with the 12/12h, the temp inside the tent is dropping to 60-80oF (18-22oC), abit low, but flowering is supposed to be in winter, so idk, see how it goes..... I'm new to growing, so idk how this will work out....... just working it as i go.... i noticed afew spots on a leaf, so i upped the neuts abit more, they are still drinking like fish, huge amounts.... Day 40 late - new vids - Got the extra gear and installed it all... redesigned the initial setup, refined it with proper measurements, had to get my steel rule out, lol....... got the 12 leds in and running, 10x 2700k clicks, and 2x 6400k osrams, with the panel..... it's lookin beautiful and got the exhaust on 24 hrs now, all working perfect with 12/12 timer.... they are forming a few spots on leaves, so hammering the nute water into them now... they are drinkin 1-2 litre of nute water a day each.... (nute water = Dutch mater gold one grow/flower, 800-1000 ppm 6 PH) 😎 Some details about lights.... i did some maths on it, and included some handy pics..... because i'm using cheap leds, i'm keeping the distance at 25cm, they are leds so they won't burn, and it massively increases the lumens/lux/Par, and with my home built light setup, the leds are spread out enough to keep it lower.... worked out good..... something of note is that all the led globes are built/made in china... however different marketing/selling companies from around the world... and the german osrams are 1w leds ... by far the most superior, but anyone can design and send the requirements to china to build em, haha) it's not a contest, we all work together.... haha.... the person with the best led light globes gets my business, because i want the best for my babies.... :) (let me explain- 1w led vs 0.5 w led, the watt of the led projects the light, lumens, LX/PAR etc much further the higher the watt of the led....my 600w panel has 0.5w leds, the philips has 0.75, the osrams have 1w leds..... ) each globe philips (dutch)- 10.5w internal - 14 leds 0.75w 1055 lumens each globe osram (german)- 10.5w internal - 10 leds 1w 1080 lumens each globe click (cheap)- 9w internal - 16 leds 0.56w 800 lumens light panel - 70w - 600w 30 red - 8 red 12 blue - 8 white 7500k 1 ir - 1 uv = 20x blue 6400k - 38x red 2700k internal - 60 double leds - 120x0.5w 6000 lm
Likes
5
Share
Alles Top.Wenig Arbeit und viel Freude 💚💥
Likes
9
Share
Been a good week seen some nice changes We have stopped canna Rhizotinic And added some terpinator But yeah all good so far We're working on our 2nd grow room at the moment hopefully be ready in 2 weeks time stay tuned 🔥
Likes
16
Share
Purple Punch Auto make some purple calix very beautifull so nice i’m looking for the Grow ✌️
Likes
10
Share
Processing
Likes
15
Share
@MG2009
Follow
Should start filling out this week🙏 going into week8? I think, I have been having to water more frequently, good sign! Let the BUDSWEL SWELL! My Buddy used his Pixel 2 for pics hopeing y'all like them. Jan 24 2018 My girls were under a 150watt cfl and an additional 80watt for past 3 days my Bloom channel died on my ( just repaired LED) and sent it back . Today I received a brand new LED to replace old one. Great customer service and the girl's look no worse off . new led running 100% grow and bloom channels.
Likes
48
Share
Aug 24: cool and rainy lately but will warm up again in a couple days. Gorilla Cookies looks really good and is flowering nicely. Very nice strain. Added some soluble seaweed to the water mostly for the K. Don’t take flash pics of photoperiods unless you’re immediately using a 730 nm light to put them into dark mode. Using the far red light like this is known as phyto-forcing and it’s like getting an extra two hours of darkness making a 26 h day. This far north I think it moves flowering up by 3-4 weeks so obviously a huge trick. Easy and cheap if you have daily access at dusk. Aug 26: it’s been a couple of weeks but I figured it was time for a lazy compost tea. I watered with it slightly diluted and the plants look almost immediately greener and more vigorous…amazing actually. 👍👍 Aug 27: this is definitely the fastest flowering of the four. Hopefully it stays sunny for a few more weeks. Thinned out the understory a bit as there were some small branches and bud sites that were not going to do anything. Check out the birds sounds on the first video. The magpies thought I was too close to their nest in the tree or something…they’re usually not quite that annoying. Aug 29: this is a great strain, and the manifold is working its magic.
Likes
4
Share
@Sunnytr33
Follow
Bis jetzt sieht alles gut aus. Wächst konstant ! Ist für mich persönlich das erste Mal, dass ich FIMing versuche. Mal schauen wie es wird. Weis nicht ob ich zuviel ider zuwenig geschnitten habe .