All good so far

Whiskers have started to grow..still no Buds though. Stem is long and the plant is a bit slender and spaced out. Watering it every 3 days and fertilising every 7 days. Hopefully I start to see the buds!

Topped two plants on the left side on 28/04. Switched to 12/12.

I'll be flipping them soon, i dont typically wait this long..i just need to get the closet set back up for the other seedlings/strains..the 3 Pineapple Express in the back are a week older than the 2 in the front..i like to give them a shot of bloom nutrients 4-5 days before flipping to flower and there's a good chance this is the last week of veg for the Pinapples..

All good I think Tell me if you see some wrong please!!!♥️And more ♥️Stay save and healthy!!!

So we got some very bushy plants. I topped them three times and trained them sideways and the plant focused it's energy on growing out sideways.

Looking healthy besides a few tiny brown spots. Switching from maxigro to maxibloom next week. Super cropped a few branches day 47

Meet Runts, my scrappiest little seedling! He started off so tiny, I almost didn't think he'd make it. But Runts is a fighter, he got stronger every day, and now he's a fully-grown tomato plant! He's a reminder that even the smallest things can grow into something strong, you just have to give them a little love and a lot of sunshine.

Day 83 Day 41 Flower This Royal Creamatic has done amazingly well. I'm very impressed royal queen seeds!! She has finalised, soil has returned to dry, I also did 24hrs of darkness on last day to help boost trichome development, not sure if worked or not but she is very tasty looking! Trichomes now seeing amber and pinks they look amazing, the smell is unreal, a caramel sweet hint then BANG straight gas to the nose and throat 😂 safe to say she'll be a hitter 💪💚 Overall I'm impressed with what I achieved from a 3gal fabric pot, on a whim I threw 3 seeds in, kept 2. Topped one, and found this strain prefers to just have lst and support during flower as she does present some dense flowers 🙌 I have a wet bud weight of 570g. Trimmed wet buds are 423g Wet trim 47g I will be hanging for 7-10 days, possibly 14 due to size of nuggets 😅. I'll update dry weight then 🤞 Bud dry weight 287g!! It smells incredible! Gassy, pungent straight to the nose, but then it's a sweet caramel / vanilla tone. Smoking - 😍😋, damn, my partner only had 4-8drags normally, but she described this one as a caramel biscuit ice cream, that tasted that good she smoked past the high 🤦‍♂️😂🤣🚀🚀 She was off, half a joint and done. Giggles, munchies, sex sleep. I enjoyed. It on the other hand, straight the eyes, dry throat, munchies as soon as stubbed out. Then we had amazing connection s+x 😁. One of my favourite strains I've done so far. Thanks everyone for following, comments and the likes 🙏 Stay high growmies ✌️💚

Shes very purple

I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"

The tiny potter grow is going good. I did burn her a bit by pushing too hard too soon. She is flowering nicely. I imagine she will be done bulking here in about a week. Then about a week of 2 for a flush and fade. Was a really neat grow with a few mutations. I did not do any training beside defoliation here, and there. Cleaning out bottom to get nutrition in easier. She twin towered due to a mutation. Regardless she did good under the Mars hydro FC4800 light. The roots are starting to crack the container. We will see if it holds together till finish. This has been a difficult grow for sure. Feeding 2 to 3 times a day has been a hassle. I sure hope I place in the tiny potter contest. Thank you Mars Hydro. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

Well here we are tomorrow will be the start of week ten from seed !! Rhino number #1 ! And white Russian are entering week 6 of flowering also start to flush !! Rhino number #2 will be starting week 4 of flowering and is growing amazing !!! So far things are running smoothly I have adjust lights from 24 to 18 to help keep humidty down !!! 34 inches for rhino 2 And 32 for rhino 1 The smell is strong and smells amazing !!! Happy 420 people :)!

This week we gave some more guanokalong nutrients, more specific for flowering the buds are starting to form and getting bigger slowly day by day! We see lot pf bud sites everywhere! Also applied a small amount of foliar bio insecticide just in case before the plant is too advanced in flowering 29 august: nothing 30 august: water 31 august: nothing 1 September: nothing 2 September: water and guanokalong nutrients ( powder, black pellets, palm tree ashes) 3 September: nothing 4 September: nothing

Day 64, 22nd of November 2021: Hi there! Here we go..... so basically pistils are appearing stronger this is the 2nd weeks since they started producing pre flowers. The plants getting a bit light might be some air circulation problem? However they look good and of course closer to the end the gettin' older so the leaves also die. Set up and timing is the same since flower season started. ViparSpectra XS2000 is on full power which is 240W so 100% capacity. Ventilation: 12 hours period when the lamp is on it switches 1 hour on and after one hour off mostly to keep the temperature and of course because of fresh air flow. When the lamp is off it switches on in every 2 hours for 15 min at the same time with the extraction fan. The extraction fan is on 12 hours when the lamp is, and then it switches on in every 2 hours for 30 min. That's all a bit more water for them from today also. Humidity quite the same approx 50%, temperature as well approx 26-27 Celsius. Fertilization remains the same since last week, the BioBizz family raised up to be 2ml/L each so it is like 2ml/L of BioGrow, 2ml/L of BioBloom, 2ml/L of TopMax... see the ratio above. The schedule of the fertilization has not changed happnes 2x a week except epsom salt just 1x a week.

420Fastbuds-Week 10 Cinderella Auto What up grow fam weekly update for these two stinky girls. Did a defoliation taking off almost all the fan leafs and let them swell up and rippen before giving them the chop this week. Seeing 70/30 clear to amber trichs. They smell super super pungent and sticky as all get out. Excited to get the trimmed,hung to dry and start this curing process. All in all Happy Growing

Nun geht immer mehr mit den Buds doch leider wirkt auch der Mangel immer noch stark auf sie ein. Ich versuche weiterhin die Versorgung mit Komposttee zu gewährleisten.

I accidently let this one dry out TWICE... so she took a while to sprout. Glad I didn't kill her