Harvesting my fist plant this week. I've read that stopping watering before harvest will increase resin production. You can see that most leafs on the bottom right plant turned yellow. Most of its trichomes are cloudy with a few amber ones here and there.

This wasn't my first rodeo with this strain, so I knew exactly what to expect. She delivered as usual. I love using this site to document my grows. It has been a resourceful guide for me as I navigate my way through my journey as a grower. Everyone who grows anything should use it. A great reference tool for yourself and others.

Great grow. I experimented with topping and topped to earley which hurt my overall yield but after all was said and done I ended up with just over an ounce of really good top shelf pot!!!

Это всегда было приключением. Этот сорт выращивался и в ауте и помещениях, но никогда он не был таким маленьким, как в этом случае) Очень интересное путешествие, но и очень быстрое. Я не прилагал усилий, растение само росло, справлялось с высокой температурой и стабильно росло. Хорошие показатели в скорости цветения! Даже в партизанском выращивании, ей понадобится не больше месяца для наращивания своих цветов и ещё один месяц для их доращивания и созревания. Этот сорт быстр и неприхотлив. Могу рекомендовать его новичкам, желающим получить свой первый опыт выращивания на открытом воздухе.

First week in water.

Flipped to 12/12 on a full moon 8th August 2025…I should see some flowers within the week I will also start her PK organic liquid nutrients.

New week starts. 🌞05.04 Today I warered my plants with 'GHE First true leaves'(1/1/1) solution and gave them full dose of Fulvic acid ('Diamond nectar'). Also, I spraiyed them with clean water. Next spraying will go with a 'Sea Weed' micsture. I'll give them new nutrients slowly, step by step. Looks nice, I'm waiting for the end of a week to transplant them into the bigger pots. 🌞06.04 It's a 'rest' day. Nothing, except spraying with a frash clean water ph6.3. I'll start to spray leaves with the 'SeaWeed' solution after the clean water watering (two days from now). 🌞07.04 Nothing. 🌞08.04 I made defoliation of 'Critical' (4 leaves only), sprayed all my flowers with 'SeaWeed' solution and watered three of them with clean water with 'GHE Mineral Magic' powder. 'Critical's soil is too wet still, so it didn't get water today. All four of my girls got LST. Upd: I made huuuuge defoliation on evening. Now all eight brunches on each plant starts to take its form. It's pretty well done (look on the last photo taken). 🌞09.04 Nothing today. 🌞10.04 'Sea Weed' spraying only. I'm waiting for tomorrow morning to transplant my babies and to make final LST (crone forming). 🌞11.04 I finally made the transplantation today. My girls roots has already come from the pots bottom. 'Canna terra' earth wasn't enough, so I made 20 liters of my own (soil+perlite). They all looks nice and I think, we'll change the light schedule to 12/12 for about two weeks. Watered them with 'GHE Pro Roots' solution and spraiyed with clean water. It was a good day. _________ Week ends.

I started using the bud clips to bend the longer tops where I want them. hopefully I’ll be able to get a trellis net up after my drainage trays get here and I can suck out my runoff with a pump or shop vac. I’m thinking a small transfer pump with two hoses. vac is just too loud. next grow I’m using a tilted drain table and a pump out I hope.

This week went really well ! Today we are at day 79 from seed an looking beautiful! One Forbiddin Runtz got chopped an hung to dry out an the rest are still flushing out through the rest of this week! Very nice looking fades coming along on the fan leafs from purple to green , so beautiful ! So happy with these genetics from @fastbuds_genetics! Super sticky an smell is so amazing, room full of purple punch’s an Forbiddin Runtz the smell you can’t beat, so many berries!!! Well stay tuned for next week! Cheers y’all

my dry and cure style is this: 4 days of hanging upside down to get water activity lower to around 0.6 in 50% humidity and 26 C temp (i know its a little high but we are in a hot summer right now and i cant get it lower even with air conditioner) and then after 4 days of drying i remove leaves and stalks, trim buds and move them to jar for the rest of their life :D . and in the first 4 days of curing i open the jar door and let hem get some fresh air in the jar for about 5 minutes and close the jar door again, after 4 days of curing like that buds are smokable but they will get better as they getting cured about 1 month. buds are one of the hardest as fucking rocks type of buds! very dense , compact , sticky , smelly , amazing at every aspect growing stage was 60 days and flowering stage was 70 days total (harvested tops at day 63th) the total weight of dry buds was : top buds 174 G + lower buds 55 G = 229 G my overview of strain with details: the seeds: unfortunately i only got 1 seed cracked out of 5 so i will not know how much this genetic can get different but at least i got the chance to grow once of this wonderful strain the plant : in every stage you can ensure that you are dealing with a high level plant , she will get big so you have to control her height LST and SCROG highly recommended , will grow very well with tick stalks and big fan leaves , has good resistance for stress and will respond very well to stress trainings , she really has gorilla power in herself , fresh buds on plant : buds are very compact and dense even from start , fresh blossoms smells like pineapple and mango , 2 different shades of sweet smells like you hold 2 junks of pineapple and mango in your hand and you smell them together, she is a trichome and resin factory , very very sticky , very oily , strong smell dried buds: very compact and dense , hard as rocks , has dark colors with purple hues inside it , it smells sweet smoke : very smooth and sweet like lollipop , pineapple , mango like , after 2 minutes it'll kick in and you'll get higher and higher with every breath , has a strange and especial high mind high mostly

Inizio 2 settiman...anche loro stanno venendo su benissimo.da questa 2°settimana inizierò anche dandogli poco Ph perfect ,......... Oggi 17/10/2024 .queste papaya cookies auto Che mi ha regalato la cara Molly di fastbuds, stanno esplodendo di vita😉💪🙏🤣😂.... Forza belle piantine mie ... Oggi 18/10/24 sto pensando di toppare una di ogni varietà...tipo 3 le toppo e 3 no e vediamo qual'è che viene meglio Toppata...,....

The cannabis strain Grape Guava can be a purple strain, depending on its specific phenotype and genetic makeup. While not all phenotypes of Grape Guava are purple, some variations, such as the Zatix Grape Guava, are noted for their striking purple appearance due to the genetic expression of anthocyanin pigments. https://www.youtube.com/watch?v=cKdVmdoKJ5k In a garden of green, Grape Guava gleams, With its fruity aroma, enchanting dreams. Clusters of grapes, guava's sweetness ignite, A strain so divine, in purple and white. Euphoria whispers, a lush fruity haze, Grape Guava's embrace, a tranquil daze. Off and away.@1400ppm. The increased CO2 allows plants to thrive at higher temperatures, which in turn necessitates higher humidity to maintain the ideal VPD for healthy growth and transpiration. 80F -5F = 75F LST with 70% RH = 0.72 kPa. Higher temperatures and humidity promote rapid growth, nutrient uptake, and photosynthesis while maintaining a lower stress level. Temperature influences the rate of enzymatic reactions involved in aerobic respiration. Enzymes, such as those involved in glycolysis, the Krebs cycle, and the electron transport chain, work most efficiently at an optimal temperature range. In low temperatures, enzymatic activity will slow down, thus reducing the rate of aerobic respiration. In high temperatures, enzymes can become denatured, thus impairing their function and stopping the process of aerobic respiration. Glucose is the primary fuel for aerobic respiration. The rate of aerobic respiration increases with the availability of glucose, as it is the starting point for glycolysis. If glucose levels are low, cells may rely on alternative energy sources such as fatty acids or amino acids , but these processes may yield less ATP or be less efficient. To determine this effect, carbon dioxide volume was measured (as carbon dioxide is an output of aerobic respiration) 18/6 with the 6 being IR. The near infrared (IR-a) borders around 700nm up to 1400nm @ photon par flux density of 1.8 instead of darkness, keeping temps overnight a neat 77F-80F. Think of my tent as a lung. What goes in must come out. When the rate of air going out exceeds the amount of air coming in, it creates a negative pressure. Tent concaves (bends in). If set up correctly, your RH will begin to drop slowly to the desired level you set, and the extraction turns off when it reaches desired% RH. The plant, as it performs cellular respiration, will always be releasing more water into the air, so the RH% of the tent overnight will always increase, so long as oxidative phosphorylation is occurring. As soon as the RH% creeps back up to 55%, the extraction turns back on, over and over. This creates a strong pressure differential which will work wonders on your grow. Replicating high and low-pressure fronts in nature. Critical for oxygen diffusion at the critical time of peak cellular respiratory function.. Moisture will not transfer from a saturated atmosphere to another if that air is already at or above its saturation point, meaning the air can't hold any more water vapor. Once I understood that water is produced as a by product during cellular respiration, specifically at the very end of the electron transport chain (ETC) where electrons are finally transferred to molecular oxygen, the higher the RH of the air, the more resistance there is for more moisture to be added to that environment, and effects the ease with which it does so. But none of that water comes from the pot; it's pulled from the air. If you run high daytime RH, your medium/pot is 100% reliant on transpirational root pull to move water. ZERO evaporation happens across the atmosphere if the tent air has high RH%, the medium cannot release its water through evaporation. Once a canopy develops, light no longer slowly wicks and evaporates from the topsoil. The Soil-Plant-Atmosphere Continuum (SPAC) describes the continuous pathway and process of water movement, driven by a gradient in water potential, from the soil, through the plant's roots, stem, and leaves, and finally evaporating into the atmosphere through transpiration. There is evaporation, there is transpiration, and then there is evapotranspiration; Evapotranspiration (ET) is the combined total of two processes: evaporation (water lost directly from soil and surface water into the atmosphere) and transpiration (water released from plants to the atmosphere through their leaves). Evapotranspiration represents the total amount of water that moves from the medium into the air. There is no such thing as a medium with too much water, only a medium that retains too much for too long. The water must always flow efficiently from one atmosphere(Medium) to another(Air) in a timely manner. Moisture is a critical factor for bacterial growth and decay. Dictating how long it's allowed to sit in any one location for any given period is a key preferred control. To ensure a net reduction in a bacterial population, the rate of removal (ET) must exceed the rate of bacterial growth (decay rate), which is often modeled as a growth rate for the specific bacterium under the given conditions. By optimizing daytime VPD, we also optimize conditions for bacterial growth to explode exponentially above 77°F.. If water is allowed to sit in a medium without an escape within a timeframe, nothing good will happen. IF High RH is maintained overnight as well as during the day, placing 100% of water movement at the behest of daytime transpiration, roots can only pull where they can reach, and if soil is compressed above a certain point, moisture will become trapped in a medium with no way of moving day or night. This will begin the countdown for decay to take hold. When water stagnates in a medium, it loses oxygen, creating anaerobic conditions that foster the growth of harmful microorganisms like bacteria and fungi, which can produce toxins and disease vectors. Thigmomorphogenesis, the process by which plants respond to mechanical stimuli like touch by altering their growth and development, results in significant morphological changes to improve survival against mechanical perturbations. This complex response involves sensing touch and initiating physiological and genetic responses, leading to changes in form and structure over days or weeks. The process is triggered by physical forces such as wind, rain, or touch. Plants adapt to these stimuli by changing their shape and structure, which may include slower growth, thickened stems, or altered leaf development. Plants possess sophisticated mechanisms to detect even subtle mechanical stimuli and initiate responses. A variety of molecules, including calcium ions, jasmonates, ethylene, and nitric oxide, are involved in signaling these mechanical inputs. Touch can induce the expression of genes that encode proteins for calcium sensing, cell wall modification, and defense mechanisms. A plant exposed to constant wind may become shorter and sturdier. A plant that is touched frequently might grow more slowly to conserve energy and develop thicker cell walls. These changes increase a plant's resilience and ability to survive in harsh environments. Let's get Thiggy with it.

### Day 22 ### Jeej, the last week of vege! She looks to respond pretty well to the LST, I see nice new growth everywhere. She is also very dence as shown in the video up above. I hope she will get a mayor stretch when starting to flower. I'm already very proud of how this little plant is turning out. 😁🌱 Also ordered some biobizz top max and bio heaven to boost flowering when it happens. ### Day 23 ### Decided to add more LST, a lot more LST (like 7 wires extra in addition to the 2 initial ones)! 😂 Was a little hard because of the density, but it worked out. I think only one budsight does not have access to direct light. I just could not get it in the right place, oh well, there looks to be enough others 😋. Hope she is not stressed too much, some of the bends are pretty hard, but she is still flexible. After reviewing the photos again I realized that I'm growing her in kind of a spiral. ### Day 24 ### Started the day by tucking the bigger leafs underneath the small ones who need more light. She looks happier now! Also watered her 0.6l with nutrients, the soil was becoming pretty dry and it was 3 days ago since her last watering. ### Day 25 ### Pretty uneventful day. She is still liking the LST, like a lot! Readjusted the LST and tucked the bigger leaves under. There is only one part of new growth I'm concerned about! It is in the middle of the top view picture, so it is from a few nodes before, but looks terrible in comparison to the rest of the plant. Like it was eaten by something. Hopefully she will rebound from this. ### Day 26 ### I put some cardboard in a V shape in front of the intake fan to defuse the airflow more. Now the new growth that had problems yesterday looks a little better, the brown red-ish is fading away. Windburn is a real thing apparently 😲 Did a lot of LST again today, trying to stay ahead of the growth. ### Day 28 ### The last day of week 4. Did some more heavy LST to make sure all potential budsights get enough light. The growth that was struggling a few days ago is doing a lot better and seems to be recovering.

27/02/19 - Cant wait for these to be done as I’ve never had gelato before so I feel like I’m missing out 😂 but yeah other than I let them stretch abit taller than I usually prefer it’s all going well, new genetics/nutrients/medium seem to be doing the job. 02/03/19 - Just transplanted all into their final pot, just in time I think as it looked like the roots were starting to circle at the bottoms of the pot, sprinkled half a tea spoon of Mykos on each hole prior to the transplant & fed them 2.5 litres each. I was going to saturate the whole pot but I’ll do that next feeding.

At the end of past week a branch was broken from the longest plant. Also she got some burnt leaves because she was to close to the corrugated roofing. Every time I went away I was giving them shelter. Weather was unpredictable. Only got this video this week. The weather was getting better😀, but still cold nights.

Last little watering for another week or less Then we pullllllllllllll :) Small foliage cut here again … all big fan leaves trimmed just about.

Looking closer and closer to being finished with this one.. I lowered the ppms down to 600. May need to go lower most the tops look like they are finishing up. This one is pretty massive filling my 5x5 tent pretty good and the root production out of this 6" net cup is pretty gnarly. Definitely not lacking any quality either. Buds smell delicious and are super sticky.