Forbidden Nectar, Supa Choopz by Zmoothiez | Rainbow Tirangle by Perfecttree
the headbuds of the rainbow triangle were already harvested with the other plants (Forbidden Nectar and Sunset Kush Pop Clone), as one of the thick headbuds had already a little bit budrod We left the rest of the plant for another week. During this week, the lower buds really put on weight again. The head buds are already dried and will be cured. The rest has now been hung up to dry.
#10 – Mango Runtz
ojulhao
@ojulhao
Follow
I've decided to harvest them by the end of the 11th week.
White widow XXL Auto
I believe some foxtailing is going on but other than that waiting on her to finish up
Cookies Gelato
This was a good week to learn a few things about what I want to do for the next grow. This grow, I let the ladies grow to 5 nodes before topping to the third - next grow, I would top to the third when the 4th is clearly visible. I am about 1 week behind schedule, waiting for the nodes on the mainline to grow so they can be topped again. Going to top them into 8 main cola’s. Reduced water in the buckets to 7l so that the roots have to work a little harder because Cheech was showing signs of being over-watered. Lights remained at 60cm about the plants, 1ml of all nutrients per litre of water.
10# Double Scrog Vertical 50x50x100 Ledf
SooSan
@SooSan
Follow
Le stretch est vraiment ridicule, je voulais que ça monte jusqu'en haut... Tant pis... En tout cas la flo est lancée 😁 Dans l'ordre: 1) Afghan Peach x Blue Monkey 2) Gelato Cake 3) Fast Critical Poison 4) Tropical Fuel 5) Hindu Kush 6) (Blueberry x Black Domina) X (Kosher Kush x Mk-Ultra) 7) Blueberry 8) Herz OG 9) (Blueberry x Black Domina) X (Kosher Kush x Mk-Ultra)
K.O blacktuna Colombia
PalmaGrow
@PalmaGrow
Follow
29 - 5 Octubre Finalizando ciclo el banco recomienda de 7 a 8 semana se dejó las 8. Después de 4 años sin poder cultivar pero con la fe siempre de que lo aprendido y lo vivido no se olvida.
OUTDOOR Apricot Automatic FastBuds
Woche 6 – Die Apricot zeigt ihr wahres Potenzial 🍑✨ Diese Woche hat meine Apricot offiziell die Blütephase erreicht und ich könnte kaum zufriedener mit ihrer Entwicklung sein. Von Anfang an zeigte sie einen kräftigen Wuchs, doch jetzt beginnt sie langsam ihren eigenen Charakter zu entfalten. Die Pflanze hat eine wunderschöne Struktur entwickelt. Die Seitentriebe wachsen kräftig und bilden ein gleichmäßiges Dach aus potenziellen Budsites. Besonders gefällt mir die natürliche Verzweigung, die dafür sorgt, dass Licht nahezu jeden Bereich der Pflanze erreicht. Trotz des Outdoor-Lebens mit wechselhaftem Wetter zeigt die Apricot keinerlei Schwächen. Die Blätter präsentieren sich gesund und vital, das Wachstum bleibt konstant und die ersten Blütenansätze sind inzwischen deutlich sichtbar. Aktuell befindet sie sich mitten im Stretch und legt täglich sichtbar an Größe zu. Genau in dieser Phase entscheidet sich oft, wie beeindruckend die spätere Blütenstruktur ausfallen wird. Wenn sie diesen Weg weitergeht, könnte sie sich zu einer echten Schönheit mit zahlreichen dicken Colas entwickeln. Die Vorfreude auf die kommenden Wochen steigt von Tag zu Tag. Die Apricot wirkt momentan wie eine Pflanze, die gerade erst warm läuft und ihr volles Potenzial noch längst nicht ausgeschöpft hat. Die Bühne ist vorbereitet – jetzt beginnt die große Show. -------------------------------------------------------------------------------------------------------------------------------------------------------------------- Week 6 – The Apricot Starts To Shine 🍑✨ This week my Apricot officially entered the flowering stage, and I couldn't be happier with her progress so far. She has developed a beautiful structure with strong side branches and an even canopy full of promising bud sites. What stands out most is her natural branching pattern, allowing light to reach nearly every part of the plant. Despite being grown outdoors and facing changing weather conditions, she continues to look incredibly healthy and vigorous. The leaves are lush and vibrant, growth remains steady, and the first flower sites are now clearly forming. She is currently right in the middle of the flowering stretch and is gaining size every day. This stage often determines the final shape of the plant, and if she keeps growing like this, she has the potential to become an absolute beauty covered in large colas. The excitement for the upcoming weeks keeps growing. Right now, she looks like a plant that is only getting started and still has plenty of surprises left to reveal. The stage is set — now it's time for the main performance.
Green Poison - Sweet Seeds
Ferelite
@Ferelite
Follow
Week 4 Bloom 31/08 - Mass defoliation day, #1 was suffering from the amount of leafs it had, #2 was not as bad, has filled its own structure out nicely and outgrown #1. Flushed and changed water. Upped the liquid potash. Added a tiny bit of CMX due to #2 showing a slight magnesium deficiency. Switched from PSI to cyco silica due to running out of PSI. Humidity and temperatures have been near perfect, 28-38% RH and 20-25 degrees celsius, extra exhaust ventilation helped a lot.
Gorilla Cookies Auto Experience
This one has been the second easiest harvest we ever did (back to the Purple Punch), the plant lost many leaves by herself, still pretty easy. she has a strong flavour and we literally cant wait to smoke her.
Black Haze
KeiKie90
@KeiKie90
Follow
1.10.2021 Day 8 Black Haze Info: Nutrients: n/a Water: 300ml Temperature: 21*C - 29*C Humidity: 54% - 72% 2.10.2021 Day 9 Black Haze Info: Nutrients: n/a Water: 300ml Temperature: 22*C - 29*C Humidity: 52% - 72% 3.10.2021 Day 10 Black Haze Info: Nutrients: n/a Water: 300ml Temperature: 21*C - 29*C Humidity: 56% -78% 4.10.2021 Day 11 Black Haze Info: Nutrients: 2nd week! Water: Temperature: 21*C - 27*C Humidity: 54% - 76% 5.10.2021 Day 12 Black Haze Info: Nutrients: n/a Water: 300ml Temperature: 22*C - 29*C Humidity: 50% - 68% 6.10.2021 Day 13 Black Haze Info: Nutrients: n/a Water: 300ml Temperature: 21*C - 28*C Humidity: 51% -72% 7.10.2021 Day 14 Black Haze Info: Nutrients: n/a Water: 300ml Temperature: 21*C - 26*C Humidity: 56% - 70%
🔥📦RF3 AUTO by Fast Buds
CalGonJim
@CalGonJim
Follow
4/13 10AM MONDAY They are looking pretty good. Got the ph stabilized and only running 98W! Using a few DROPS in 18oz to test Purpinator on veggies. 4/14 11am Using a little Purpinator .5ml per gallon and will have to do lots of runoff to prevent burns. Using vegetables to test fro Purpinator burns👍 4/15🚨🚨🚨 Your setup photos are great — thanks for sharing them. The R2-D2 power strip topper is a fun touch (he’s guarding the outlet like a proper astromech droid). Here’s a clear breakdown of what I see and my honest opinion on the power draw/safety. What you’re running • Two Mars Hydro TS1000 lights — These are officially rated at 150W each (real-world draw is usually ~145–150W at full power, sometimes a bit less if dimmed). You mentioned ~100W each, but they’re actually higher — so total for the two lights is roughly 300W. • Plus the two black fan speed controllers (one for each tent’s exhaust/inline fan). • A few small wall warts/adapters plugged into the white smart plugs or directly. • You measured 335W total across tents 1 and 2 on one outlet — that lines up reasonably (lights ~300W + fans/controllers ~20–40W depending on speed + minor losses). Is this safe on one standard outlet/circuit? In most US homes a standard wall outlet is on a 15-amp 120V circuit: • Max theoretical capacity = 15A × 120V = 1,800W. • Safe continuous load rule (National Electrical Code for things running 3+ hours, like grow lights): Stay under 80% = 1,440W max. Your 335W total is very low — only about 23% of the safe limit. That’s comfortably safe. No real risk of overheating the outlet, tripping the breaker, or fire hazard from overload right now. My opinion on the setup: • Good: Everything is neatly plugged in. The white smart plugs (with the green lights and blue indicator) and the labeled ones (9e, 10e, 11e) look like you’re using them for timers or monitoring — smart move for controlling lights/fans independently. R2-D2 adds personality and keeps the wall organized. • Fine for now: Two TS1000s + fans on one outlet/circuit is no problem at these low watts. Many small grows run similar loads without issue. • Long-term suggestions (to keep it safe and reliable as your grows expand): ◦ Don’t daisy-chain too much — You already have multiple adapters and controllers stacked. Avoid adding a lot more (e.g., dehumidifier, heater, or more lights) on the same outlet/circuit. ◦ Check heat — Feel the wall outlet and the power strips after the lights have been running for a few hours. They should be only slightly warm, not hot. If anything feels warm/hot, spread the load. ◦ Dedicated circuit is ideal — For peace of mind, run the lights on their own circuit if possible (or at least separate the fans/controllers if you add more equipment later). ◦ Surge protection — Make sure the main power strip or outlet has good surge protection, especially with grow equipment that can have inrush current when turning on. ◦ Monitor actual draw — Your 335W reading is helpful. If you have a kill-a-watt meter or smart plug that shows real-time watts, keep an eye on it when everything is at full power. The houndstooth shirt hanging on tent 2 is a nice personal touch — makes the grow room feel lived-in and less sterile. Quick safety checklist for your whole setup • All cords are in good shape (no fraying, especially the black ones going to the fans). • Nothing is blocking airflow around the plugs/adapters. • The inline fans and ducting look properly attached (important for heat and smell control). • If you ever add more lights or equipment, recalculate the total watts and stay under ~1,200–1,400W on that circuit. Overall, your power setup looks thoughtful and creative (love the R2-D2 detail). It’s not overloaded at 335W, so you’re good to keep running tents 1 and 2 like this while you sterilize and prep tent 3. 4/16 543am 5ft tent sideways attached to 6ft table that can slide around 4/17 3:45am. Here’s the exact vibe you’re going for, and yeah, it’s dark, inappropriate, and could be hilariously unhinged if executed right: Video Concept: “Revenge of the Skid Row Sith” • Split-screen the entire time. • Left side: Clean, epic original Revenge of the Sith footage — Anakin vs. Obi-Wan on Mustafar. Dramatic dialogue, lightsabers humming, lava flows, John Williams score swelling (“Battle of the Heroes” or the full Mustafar duel track). • Right side: Real, raw bodycam or dashcam footage of two absolutely fried-out junkies (or one junkie vs. cops/security) going full delusional meltdown on the street — flailing, screaming nonsense, swinging wildly at nothing or at officers, thinking they’re in an epic lightsaber duel. Twitching, eyes rolled back, yelling shit like “YOU UNDERESTIMATE MY POWER!” while barely able to stand. One of them probably shirtless, covered in sores, pants falling down, yelling about the “high ground” while tripping over a curb. The comedy comes from the perfect sync: • When Anakin says “I hate you!” → Junkie on the right screams “I HATE YOU COPS!!” or just incoherent rage. • When Obi-Wan says “It’s over Anakin, I have the high ground” → The junkie is literally on the curb or a slight incline, yelling at the cop below him “YOU HAVE THE HIGH GROUND?!” • Dramatic slow-mo lightsaber clash → Slow-mo of the junkie wildly swinging a broken bottle or just air, missing by a mile while the cop easily sidesteps. • Anakin getting chopped up and burned → Junkie getting tased or tackled into the dirt, still convulsing and screaming about betrayal. Overlay the full Star Wars audio (dialogue + epic music) on top of the real footage on the right, so the junkies’ actual grunts and screams are mostly drowned out or faintly audible underneath, making it look like they’re perfectly delivering the lines in their drug-fueled psychosis. End it with the classic “You were the chosen one!” speech while the junkie is face-down in his own puke, getting cuffed, still muttering about the dark side. Tone-wise: Super dark humor. It walks the line of “this is fucked up” but the absurdity of the overlay makes it land as comedy instead of just tragedy porn. Think It’s Always Sunny energy meets Cops bloopers with Star Wars fan editing. I can’t actually generate or edit real video clips here (especially not real bodycam footage of people in crisis — that’s a legal/ethical minefield even for parody). But if you want, I could: • Write a full detailed script/timeline with exact timestamps from the Mustafar scene synced to generic “junkie fight” beats. • Suggest public-domain or fair-use-friendly ways to source similar footage without doxxing real people. • Help you describe it precisely enough to feed into a video AI tool like Runway, Kling, Luma, or whatever’s good for video right now (with heavy disclaimers on the dark content). Want me to flesh out the full beat-by-beat script for the Mustafar duel re-cut this way? Or pivot it to fully AI-generated characters (two cartoonish, exaggerated skid-row types in a filthy alley “Mustafar” with lava made of spilled fentanyl and burning trash) to avoid any real-people issues? It’s a nasty, wrong, stupid idea… and that’s exactly why it could be comedy gold in the right hands. Your call how far you want to take it."" 4/18 3:21AM 👨‍🔬🚨"Yeah, pH drift upward overnight (or over several hours) in a freshly mixed hydroponic nutrient batch is super common—especially when you let it sit with constant agitation like a magnetic stirrer. It's not usually a sign that something's broken, but it can make adjustment feel like a battle the next day. Why this happens with your setup CO₂ off-gassing + aeration/agitation: Fresh water (especially tap or even some RO) often holds dissolved CO₂, which forms carbonic acid and keeps pH lower initially. When you mix nutrients and run a magnetic stirrer all night, you're constantly agitating and exposing the solution to air. That drives CO₂ out, reducing the acid, so pH naturally rises (sometimes 0.5–1.5+ points). Magnetic stirrers create good mixing but also promote gas exchange, speeding this up compared to a still jug. Buffering from water and nutrients: Many water sources have alkalinity (bicarbonates, etc.) that acts like a buffer. Nutrients themselves have their own buffering capacity. When you add pH Down right after mixing, the buffers can "fight back" over time, slowly pushing pH higher as the solution stabilizes. General Hydroponics recommends mixing nutrients first, waiting 15–20 minutes (or longer), then adjusting—because immediate readings can be misleading. Temperature and time: pH readings shift with temp, and overnight changes let everything equilibrate. If your stirrer keeps things moving and slightly warmer, that can influence the drift too. Your General Hydroponics pH Down (usually phosphoric acid-based) should still work, but if the solution has strong buffering or you've already hit a stabilized higher pH, it can feel "hard to lower" because you're fighting those buffers. Adding it slowly while stirring, waiting 10–30 minutes between additions, and re-testing helps. Don't chase it too aggressively right after mixing—let the batch settle. Does this happen in the "reservoir" (rez) too? Absolutely—often even more noticeably. In an active rez (with airstones, pumps, or circulation), constant aeration drives the same CO₂ off-gassing, causing pH to creep upward over hours/days. Plant roots taking up nutrients (especially nitrates) can push it higher too. Many growers see this exact pattern: mix and adjust at night, wake up to higher pH. It's why a lot of people premix the night before, let it stabilize with gentle mixing/aeration, then do a final pH check and tweak in the morning before using. Quick tips to make it less frustrating Mixing routine tweak: Use your magnetic stirrer to fully dissolve nutrients, but maybe run it for a few hours instead of all night if the drift is too much. Or mix, stir briefly, let sit still for 30–60+ minutes, test/adjust, then optional light stirring. Water source: If you're on tap/well water with high alkalinity, that amplifies upward drift. RO water often needs more pH adjustment initially but can be more stable once set (though pure RO can sometimes drift differently). Adjustment technique: Add pH Down in small increments while stirring, wait for the meter to stabilize (it can take time), and re-test after 15–30 min. Track how much you use per gallon so you can anticipate next time. Test meter: Make sure it's calibrated and the probe is clean—old or dirty meters give wonky readings that make drift seem worse. If it's stubborn: Some folks add a tiny bit of pH stabilizer or just accept minor daily tweaks. Citric acid-based downs can drift more than phosphoric ones, but GH's is usually pretty reliable. This is one of those classic hydro "annoyances" that almost everyone runs into—your nighttime low-frequency tuning sessions with the subwoofer probably give you plenty of time to notice these little chemistry experiments too.""
première culture
Titoff
@Titoff
Follow
Début de semaine 8 remplies de surprises, la tente de culture qui avait du retard selon moi par rapport à la deuxième tente, a progressé à une vitesse fulgurante, certes les plantes qui composent celle-ci sont plus petites mais la canopée est plus uniforme et il est à présent difficile de différencier dans ce que l’on voit de qui appartiens à qui tellement chaque plante à des ramifications remplies de bourgeons, un vrai régal pour les yeux et le nez. Elles font rêvées, ces jolies demoiselles... Ma deuxième tente que je pensais nickel si ce n'est que je n'ai pas su contrôler leurs hauteurs et que je me suis retrouvé avec les pointes qui touchaient la lampe, enfin après avoir tricoté un peu et diriger les branches en les attachants des fois avec de la laine, j'ai pu reprendre un peu le contrôle et m assurer que la lumière transite bien dans toute l'espace de culture devenu une vraie forêt. Et la surprise à 2 semaine de la fin, alors que je comptais commencer mon rinçage, je me suis aperçu que certaines de mes feuilles de la partie basse, comportaient des taches suspectes, après investigations et recherche sur internet, j'avais des thrips ! Etant en phase de floraison très avancés, mes moyens de traitements contre ces nuisibles sont donc presque nul, traitement chimique interdit, me reste donc comme solution le protoxyde d’hydrogène mais très discutés sur la toile ou les avis divergent beaucoup... le savon noir, dont beaucoup de sites présentes des recettes qui peuvent nous être très utiles , les bandes adhésives bleu prévus pour les thrips, et la dernière solution éliminé manuellement a la main... Après avoir lu et fouiller le net, je me suis tourné vers growdiaries et je me suis rendu sur le chat du site ou j'ai fait la connaissance de chouettes personnes qui me sont venus en aide et je les remercie encore grandement. Pour ma pars face à ce nuisible, j'ai suivi leurs conseils : savon noir plus éliminé à la main et contrôle minution chaque jour. Si je peux les nommes, merci à laBOSSANOVA, bird_of_prey et weedawan pour leurs conseils et leurs sympathies, première demande d’entraide réalisé à merveille. Ce site est juste top.
Fruit Spirit
I topped yesterday, watered today without fert. sprayed a mixture of oils on the topsoil for pests. Any advice or comments always appreciated -
shorts_status_processing
First Time Growing
CuscoLion
@CuscoLion
Follow
i know this diarie has been abandoned and im sorry for that , now the girl is in stage of flowering , i recently bought some nutrients for her ..
Sour Diesel
Dunk_Junk
@Dunk_Junk
Follow
Her first week!! Soil mix in her little 1L airpot is 2:1 Soil:Perlite
My First Grow
SgtDoofy
@SgtDoofy
Follow
2/20: Both pots are light and are looking droopy. Time for first day of feeding nutrients. I used 1tbsp unsulphured molasses mixed into a half strength mix of General Organics GO Box nutrients, following the first week of flower instructions. 2/21: Both plants are looking great this morning. Amnesia seemed to have grown more overnight! I'll need to watch the timelapse to see what happened. My lights are at about 80% at 12 inches above the plants. I'm going to increase it to 12 inches above the tallest cola. 2/22: May turn both lights to 100% soon, as the timelapse of the night didn't show much growth or movement. Otherwise looking good. 2/24: Woke up to Amnesia's lower leaves turning yellow, brown, and crunchy. Google research thinks its a PK deficiency, the last two letters if the N-P-K nutrient list. Discord users also believed it was a PK deficiency on their own accord. I may be able to remedy this by upping my main Biothrive Bloom to full strength to increase those nutrient numbers, and feeding her now. She's growing fast, I could see why she'd be hungry again after 4 days. Her pot wasn't quite all the way light before bed though. After today's feeding I'll go down to 3/4 strength on the Bloom for the next feeding. EDIT: After lifting Amnesias pot, she definitely is ready for feeding/watering. Probably starved a bit overnight in the hot tent. Later at night, Trainwreck began to droop, so I mixed up a half strength of nutrients and fed her a gallon over a half hour.
BEAST(!!!) Cookies Gelato - Outdoor
Rap_a_cap
@Rap_a_cap
Follow
She's having fun and has passed the first heat wave without issues. I hope that her company will be a girl too, it's a cross between a femele Morroccan landrace and a Lebanese "black gold" pollen made by myself. Let's see