05/10/2018 New Tent setup. 4 plants - Veg room. 06/10/2018 Re-arranged the room to make it more practical. 07/10/2018 2x Seeds Pineapple Haze dropped into Root Riot. 08/10/2019 Propagation kit added 11/10/2018 Day 5 Sprouted 12/10/2018 Day 6 - Stretching 13/10/2018 Day 7 - Added to the tent setup.

Buds are fattening up nicely. Red hairs are starting to come in on some of the buds. Overall, looking very frosty and healthy. It's a little mind blowing that this grow - which seemed so slow to start has gone into overdrive.

I still had some spots on leaves, but look like the calmag is doing the job. New leaves look better for now. It smell stronger, and plants are drinking a bit more now. Not sure, but i think no more than 3 weeks b4 harvesting HulkBerry 1 and the cookies gelato familly. Royal Bluematic 1 seems to take more time, but is growing well. HulkBerry 2 and mostly Royal Bluematic 2 are really late and weak compared to the others.

Esta semana aplique delta 9 de manera folear, 2 ml por cada planta y un litro de agua, se recuperaron un poco de la defoliación.

I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"

I just cut her down like 3 weeks ago. Gd was having update issues. It had pretty purple flowers. They had a nice layer of resin on them. I will update more when I do the smoke report, and have it processed and ready. Thank you Gen1:11, Medic Grow, and Ganja Farmer. 🤜🏻🤛🏻🌱❄️ Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

Mar 26 Fed a gallon of RAW GROW: about 15ml worth of nutrients. Continuing the LST. Mar 27 Going to have to look back into defoliation techniques here soon. She's like a forest under that canopy!

Moving towards the end here. I’ve been checking the trics with a microscope. Flush going strong but she hasn't lost any color at all even though were going towards a week.

This week I’m letting them stretch through the trellis, I gave them a light defoliation in between the videos of day 11 and day 12 #RecycledSystem #PeyoteCookies #Cinderella99 #BlueGelato41 #GorillaZkittlez #BarneysFarm #HerbiesSeeds #FreeSeeds #GrowTent #MeizhiLED #Meizhi300 #CustomLED #UkGrown #TheUKGrowsToo #CannabisCommunity 🇬🇧

Ok, here we are again in the kitchen😄 ... This young Girl Scout Cookies was the only one, along with another seed, to decide to sprout ... three others didn't want to come out of the shell ... so it wasn't really a super deal for the moment .... but you know, anything can happen in nature and I don't want to complain, at least until I see how this and her new sister will behave, and she decided to go out today from where it was planted (after about two days) ... you can see it under half a plastic bottle in the video 🌱... always in the video you can see together with those who share his house ... after there will remain less ... seems to be growing well .. today I have once again given the root stimulator, root juice, about 1ml for 1l water pH6, 5 , also to moisten the entire substrate well, but not excessively.. The oven is on .... we hope to have a good sweet smell.. see you next week ... Let me know if you like it😉... Good growing Bye ✌️

Day 36: Girls looking pretty happy. Still some discoloration going on. Doesn't look to be spreading though. Day 37: Ok, the girls obviously were not happy this morning. I watered with quite a good amount of runoff and measure the PPM at 3200!!!!!!!!!!!!!!!!!!!!! I'm surprised they are still alive! Had to make a quick run to get some water for a flush as I only have 5 gallons worth. Ran 2 gallons through each of them at a ph of 6.4 around 9:30 this morning. It's now 5pm and they have pulled through great. These OG Kush are extremely resilient. Day 38: The girls look way better today after flushing yesterday. Two of the pots were almost completely dry already. Went ahead and fed at 500ppm with runoff. Day 39: I think it's dialed in now. They are looking amazing and still stretching pretty good. Went ahead and pulled off a handful of leaves between the 5 of em. Day 40: Did a little more defoliation and opened them up a bit. I am super worried about getting any type of mold or any issues in particular for this first round. One of the girls needs a touch more but ran out of time. Girls are looking super healthy! 💪 Day 41: They are looking super awesome. Got the runoff dialed in. 750 going in and roughly 800 coming out. May up it in a week or so. Day 42: Nothing new to update. Girls still looking amazing. I think the stretch may be slowing just a tad.

Hello, fin de la semaine 2. Quelques petits problèmes pour bien gérer mon EC, du à une eau vraiment très dure. Au niveau des arrosages, je suis passé à un arrosage tout les jours depuis quelques jours, les plantes semblent apprécier. Elles ont repris de la vigueur, à confirmer avec le temps. Voilà pour cette semaine. Happy grow...😎

No complaints, flowering good, a few yellowing on leaf is starting to show, maybe not feeding enough. But so far so good

been quite busy, due to my birthday and a new semester, which resulted in my Orange Apricot grew too close to the light and i mistakingly turned ny lights to 100% for a few days which ended up in light burn, so i had to re-adjust my setup and raised the lights.. also threw some netting on the orange apricot glue and some lst clips in an effort to hold them down abit.. still havent got the time to remove the burned leafs, but everything else looks perfect. ive also raised the Sweet cheese closer to the light.

there is a significant increase in growth after bending the upper cola, as compared with the sativa, the WB grows and blooms much faster, very grateful to your advice, everything is clearly illuminated, on the next allotment I think to add some ice and shed everything with cold water, the flavor is very strong, for three days I made leaf clippings on the lower part of the plant, fertilized 2-3 times a week, I try to add less than the specified norm, I don’t feel like leaves, I feel as you can see it’s not very bad, I feel this variety will be closer to the harvest than the neighboring sativa, it pleases, and I feel the harvest will not be bad) Well, we are waiting for 7 weeks, wish me luck)