Likes
Comments
Share
Another week and she stretch a lot. Did some very light LST and add additional nuts to the watering
Likes
2
Share
@Ryno1990
Follow
Over all this was an awesome strain to grow and will deff be growing her again some day
Likes
152
Share
🍪 🍒 🍰🍩 🎀🍪 🍒 🍰🍩 🎀🍪 🍒 🍰🍩 🎀🍪 🍒 🍰🍩 🎀🍪 🍒 🍰🍩 🎀 Day 95 chop time, harvest went fast, the stems were loaded with buds. Hehehehe.. Cannot wait to smoke this one! 😎😍 As you can see, we made a real break-up cake. 😋 You will find the recipe in the smoke report, down there! ⬇️ 😏 Beware! It's a really strong cake, I do not take responsibility whatsoever! ✌️😁 Thanks for showing up and supporting me and the girls, bless you, growmies!! 😘 ❤️ Shouts go out to my sponsors @GreenBuzzNutrients, thanks so much for your support!! 💚 💚 💚 If anyone would like to try their amazing organic products, you can find a generous discount code of 25% in my weekly comments! 😜 🙏 If you want a recommendation which product to get first.. BIGFRUITS!! 😍 I love the tasty terps with this one!! https://greenbuzznutrients.com/ Thanks also of course @Kannabia, for the beautiful genetics!! 🧡🧡🧡 Pouring all my love into this grow, thank you for joining in, growmies!! 💚 💚 💚 😘 ❤️ ❤️ ❤️ Wishing you all the best for your beautiful gardens!🌱 🙏 Grower love!! 💚 _________________________________________________________ Strain Info: https://www.kannabia.com/en/feminized-cannabis-seeds/break-up-cake We need to talk You’ve got to celebrate everything in this life, and that includes love and heartbreak. Since you’re all familiar with Wedding Cake feminised marijuana seeds, we’ve put a Break-up Cake in the oven at the Kannabia Seed Company – because things don’t always go well, and we sometimes need a friendly seed to lean on. Break-Up Cake has a base of Girl Scout Cookies, one of North America’s best-known strains, which is earthy with a very potent indica effect. And we top it off with a delicious Cherry Pie which, in addition to giving it an elegant dark attire, adds a silky, deeply sweet flavour of cherries and berries. Look no further – it’s the perfect cake. This seed will be celebrated for its ease of cultivation and abundant production. It’s one of the best investments you’ll make this year. But if it’s going to be memorable for one thing, it’s for its sweet complex flavour that’s full of contrasts. If we have to break up, let’s do it sweetly and amicably, right? How to: Break-Up Cake Break-Up Cake is an “all-terrain” marijuana seed, which will adapt to the place you allocate to it. An ode to independence, it’s a plant with only the most basic needs that knows how to grow by itself. It’s a pale branching plant with tremendous dark green leaves, purple tips, and an icing sugar coating of trichomes. Its immense buds are some of the stickiest ones we’ve found in our seed bank recently. Indoors, it needs 60 days of flowering to give no less than 600 grams per square metre. Use a Screen of Green method without hesitation, or plant it using hydroponics if you want to obtain the full benefit of its potency. Outdoors, it reaches two metres in height with a harvest of 800 grams per plant, which is reason enough to give it a go. Like a good break-up cake, this plant doesn’t need to live with a partner, and knows how to live well in a Guerrilla plot. Between 25th and 10th October is its moment. Taste and effect of Break-up Cake Very relaxing but not causing lethargy, it’s a good indica-dominant plant. Its effect is mellow (we’re too old for childish games). It calms the consumer but it also gives rise to creative moments. Head on up to the top floor, later to make your way, little by little, down to the kitchen later (where you might want to give in to temptation if you need to stimulate your hunger). The flavour is full of nuances. It will remind you of a vanilla sponge or cheese cake: you’ll notice a cherry topping, something sweet that you can’t quite distinguish, and an earthy undertone on a biscuit base… You’ve got to sample it to know it. _____________________________________________________________________ SETUP: 80x80x180 cm Zelsius 240W Full Spectrum LED IR UV dimmable DW240H-A6-HS Heatsink color red LED Chips: 512pcs SAMSUNG LM301H 24pcs Osram 660nm 8pcs Osram IR 730nm 8pcs UV 385nm Color mix: 2700K 4000K 2,8umol/J Driver HLG-240H-C2100B Coverage: veg 5x3ft / flower 4x2ft Product size: 628x205x68mm Green Buzz Nutrients Shouts go out to my sponsors @GreenBuzzNutrients, thanks so much for your support! 💚 💚 💚 If anyone would like to try their amazing organic products, use code GD42025 for generous 25% discount (for orders of minimum 75€) ✨ https://greenbuzznutrients.com/ Biobizz Lightmix custom exhaust fan 320/270cm³/h Carbon Active Granulate 240cm³/h tab water pH 8 - EC 0,25 with Calmag to 0,5 Advanced Hydroponics pH minus Grow Bloom to pH 6.2 🍪 🍒 🍰🍩 🎀🍪 🍒 🍰🍩 🎀🍪 🍒 🍰🍩 🎀🍪 🍒 🍰🍩 🎀🍪 🍒 🍰🍩 🎀
Likes
41
Share
Likes
2
Share
@cboyaki
Follow
I am happy how this grow went , didn’t come across no issues at all it was a pretty smooth run , it took all nutrients like a champ , never had any over watering problems or nothing The water I use is 6.4 PH from Lidl and haven’t occurred no problems across my grows I don’t even have a PH or TdS tester 🤭 Overall this was a joy to grow very strong sour citrusy apple smell , looking forward to trying it so hope the dry and cure goes well as the rain hasn’t helped the humidity Temps around 19-22c Humidity 50-67 I’m trying to control it as much as possible also with a oscillation fan blowing air around the room
Likes
109
Share
-Sorry I missed a week as I left town for vacation, luckily I had someone to check on them -I've been feeding once a week about 2 gallons each -I water whenever the top couple inches is dry but its been raining almost every other day so I've barely watered them -I've been using straight tap water (municipal) without dechlorinating. I was dechlorinating for 3/4 and using the 4th as a test, it showed no ill effects so I decided to not waste my time and just send it. I'ts been 2 weeks and no negative signs (touch wood) so I'll continue -I used Promix-HP as my medium, its pretty light and the girls are getting pretty tall. When I got home from my vacation I noticed they were all leaning to one side. I assumed they were leaning towards where they get the most sun so I spun them around. Doing so I noticed that they were leaning because they were top heavy and the medium wasn't dense enough to provide sufficient support. I set up the perimeter wire as you see to provide additional support and tied the stalks up with stakes. They seem pretty sturdy now. -Been getting some hot and humid days here in Ontario and they keep stretching, I'm curious as to how big they'll get before flower. -Oh and the Auto White Widow from my previous grow was planted in my flower bed and its still just vegging, hopefully it'll flower with the rest. I'm about to give her another major haircut.
Likes
7
Share
There were alot of super small fruitflies in the soil, Anyone tips? Right now i am just killing them all.
Likes
79
Share
Salutations, fellow cultivators! It's time for our Week 3 Veg Report, and let me tell you, the Epsilon F1 is turning into a botanical masterpiece. This week has been all about finesse and guidance as we've introduced some gentle training techniques to keep this green goddess on the path to greatness. First things first, let's talk about the art of bending and guiding. Picture this: a ballet of leaves and stems, a choreography where we gently encourage our Epsilon F1 to embrace the contours of the pot. I've been bending and guiding her with the precision of a dance instructor, keeping her close to the soil as if whispering, "Roots, meet Earth." Why, you ask? Well, my friends, it's all about maximizing exposure to light and ensuring an even canopy. By keeping her low and wide, we're promoting more bud sites and creating a lush, green carpet of potential harvest. It's like sculpting a masterpiece with each bend and twist. Now, let's talk about the environment. Room temperatures and humidity remain the same as last week – a cozy haven for our growing beauty. Consistency is key, and our Epsilon F1 is thriving in this stable atmosphere. Happy plant, happy grower! As for the feast, we're sticking to the nutrient regimen that has brought us this far. The Aptus Holland super soil mix continues to work its magic. Micromix Soil, Substrate Buffer Powder, All-in-One Pellet – it's like a gourmet meal for plants, and our Epsilon F1 is dining like royalty. And let's not forget the star players – Mycor Mix, the microbial maestro, ensuring our plant has the best support crew in the root zone. These endomycorrhizae are like the backbone of our operation, fostering a symbiotic relationship that's pure botanical harmony. Our Epsilon F1 is not just growing; she's thriving, loving every minute of the training sessions and nutrient banquets. Shout-outs to Royal Queen Seeds for providing the genetic canvas for this masterpiece, and major props to Aptus Holland for crafting nutrients that turn our grow space into a botanical symphony. Stay tuned, dear readers, as we continue this journey of horticultural excellence. The Epsilon F1 is on track to be a green goddess of epic proportions. Happy growing, and may your gardens be evergreen! As always thank you all for stopping by and for supporting me on this journey, i am super passion about growing and fell blessed to have you all with me on this new journey
Likes
57
Share
! this is my current status, gonna upload my last veg weeks within the next week - got a bit busy around Spannabis - thank you for your understanding! 💚 Welcome to Bud Boutique Grow Diary - really appreciate all your love and support :) Dont forget to check out my other current grows! 🗓️ This Week: - Day 17: Transition moving on - Day 20: started K - Boost - Day 21: strong (last) Defoliation after lollipopping before in last week of veg. Ive got rid of the lower bud sights (popcorn buds) and focusing on Mainbuds only. Thank you for still staying with me 💚 ___________________________________________ --- 🌱 Strain (Sponsor) 🌱 --- 🏷️ PEACH GIRL by Art Genetix https://www.artgenetix.world/product-page/peach-girl --- 🥗 Nutrients and Feeding (sponsored by APTUS: APTUS Ambassador) --- 🍸 APTUS: full nutrient schedule extreme -- Regulator, N-Boost, P-Boost, CaMg-Boost, K-Boost, Allin1 Liquid, Startbooster, Topbooster, Enzym+ every feeding -- Fulvic-Blast, NutriSpray as Foliar each once a week 🔗 https://aptus-holland.com/ --- ♻️ Grow Control (Sponsor) --- TROLMASTER: TENT-X + LM14 Light Adapter to dim/sunrise/sunset lights + Temp & rH Sensor all remote on App 🔗 https://www.trolmaster.eu/ --- 🏭 Grow Setup --- 💡LUMATEK Zeus Pro 600 * 🏠🌿 Indoor: Homebox 120x120x200cm (4x4) * 📐🌀 PrimaKlima exhausting Fan 1180m3/h (running on 60-80%) * 🌀 Can Light Filter 800m3/h & 1x Fanbox 1x Dyson fan for Air circulation 🔗 https://lumatek-lighting.com/zeus-600w-pro-29/ 🔗 https://primaklima.com/de/shop/ventilatoren-de/ec-ventilatoren/pk160ec-tc/ 🔗 https://canfilters.com/products/filters/ All Likes and comments are highly appreciated!!! 👨‍🌾 don't forget to check out my Instagram for daily educational content: budboutiquee - Bud Boutique
Likes
11
Share
@Coughy
Follow
Good stretch this week, I haven’t lollipopped at all, not even in veg. It’s fairly leafy everywhere and I want to get in there and defoliate bottom 1/3 soon. A lot of dead leaves I imagine, just been so busy and been neglecting the grow. Funny, how when you first start out and you’re overly micro-managing and then as the months go by, it starts to become a chore. I ordered a light from China, a Meijiu (HLG)550 V3. HLG Canada didn’t want to give me a decent discount so, unfortunately had to ship my money outside the country. Saved 50% for a quality light though. Might take a bit to get here, been processing in Hong Kong for 4 days. So far the leaves are healthy but last run they started to turn deficient after the stretch. In my defence, with the last grow, I was just starting on the dry nutrient regimen and made mistakes. Hopefully it stays healthy throughout bloom cycle with new changes and knowledge. New reservoir this week as follows: Partial drain, most of it gone, but 100mL RO added and; 40 gram cal nit 30 jacks 30 mag sulph. 100mL mighty bloom enhancer 100mL head masta 300 mL h2o2 25 mL Fulvic 40mL Humic pH ended up high with addition of bloom enhancer, added pH down to 5.8. PPM 1360. Wednesday-Day 10 Added water and some nutes. PPM 1200 pH 6.0 Started a small section of lower 1/3 defoliation Day 11 Did some more defoliation, added a video to show progress. Day 12 Finished lollipop on right plant. Moved some branches around. Added 20 liters and 20g cal nit, 10g of both jacks and magnesium sulphate.
Likes
10
Share
@Mr_Ewell
Follow
The strain was easy to grow. The autos were topped and suppercropped. Along with lst. Amazing yeild for my first grow. Almost a pound with 300w led. Trichomes were hard to read and took forever to turn. Went for 17 weeks from sprout. Didnt flush as long as a wanted so curing is my focus rn.
Likes
55
Share
@Wastent91
Follow
Eccoci qua alla seconda /terza settimana di fioritura, questa ragazza sembra molto promettente! Un sacco di fiori ben distanziati e già con la resina attorno in formazione, come piacciono a me, con tanta resina fin dalle prime settimane in cui spuntano questi meravigliosi fiori! Sta iniziando ad avere un odore davvero molto interessante, molto speziato e con note tipo noccialate forse? Staremo a vedere nelle prossime settimane, ma sono sicuro che questa mi darà una grande soddisfazione! Come potete vedere anche voi si è ripresa alla grande dalle carenze che aveva in vegetativa, sto seguendo precisamente la tabella di Terra Aquatica, ex GHE, sono davvero orgoglioso di fare parte della loro famiglia e di poter mostrare a tutti voi e a me stesso la potenzialità di questi nutrienti, che con soli 3 prodotti e qualche supporto da sea weed, mi sta dando forse una delle migliori erbe coltivate in vita mia? Grazie a tutti voi soprattutto che seguite i miei diari, siete di ispirazione e la ragione che mi porta a fra i vedere le mie potenzialità come coltivatore amatoriale! Un buon 420 a tutti voi alla prossima!! 💪😸🙏
Likes
4
Share
@babaweed
Follow
These kush are really beautiful and have huge peaks, they have 13 internodes and each of them is full of buds, quite large. They are really huge touch the ceiling, maybe one is too close to the lamps and I'm afraid you burn a little bit
Likes
22
Share
@TechDCo
Follow
Week 3 15/06/2024 Lights On! Switching to flower next week; maybe sooner! 16/06/2024 Lights On! Time to get on the skateboard June 16, 2024 The defoliated fan leaves. I'll just leave these here! 17/06/2024 Lights On! I can't go any higher than 300watts in this small tent. I packed the sativa tent away.
Likes
27
Share
I’m overjoyed with the phenos this strain is producing, strong vibrant purples with some serious flavour profiles! Scent Profiles we have: Candy Lemon Sherbet 🍬🍋 Sweet & Piney Diesel 🍭🌲⛽️ Sweet & Tangy Tropical Punch 🏝️🥊 Alongside this, these beauties are the frostiest and the most insanely dense koala looking nugs I’ve ever produced!
Likes
54
Share
@Njanne
Follow
Of the four plants Barney's LSD Auto is the most vivacious, with the Strawberry Cheesecake and Onyx only a week or so behind. The Northern Lights Auto is very disappointing with absolutely no branching...and some discolouration in the leaves. If she doesn't show some branching after topping, I'm going to pull her and grow a different plant. Real estate in my grow room is in high demand and I won't waste it on a dud plant :D
Likes
48
Share
Beginning of week... She is doing her thing.. Slowly but surely lol.. Healthy as far as I can tell.. Maybe the reused coco is too reused? Idk. There is a bit of coco/perlite from my first grow in there lol.. Some others too.. But she is still truckin along.. Went up on the Armor Si (Silica) and a little on the FloraGro.. She does look like she is gonna beginning flowering very soon tho.. Pistils are forming slowly.. Much like the rest of this grow.. But she is starting.. I'm not going to start counting flower till I actually see that she is flowering.. Stretching and all.. That's how I like to count flower.. Always seems to line up perfectly when you count flower that way.. Even with photoperiods.. Not from the 12/12 flip because there is still 2 weeks of transition. Anyways.. Another week in the making... Next day... So my Mars Hydro is crapping out. I have to drop it down to 20 inches from the canopy and run it at 75%.. So pissed.. It glows when it is powered off and still plugged in.. And if I turn it on while the power is set to 100%.. It just blinks until I turn it down to 75%.. I can have it set to 75% and it will turn on like normal.. But I need to use 100% power.. And Mars Hydro sucks with responding to emails apparently.. I'm gonna have to buy a new one and return this POS.. Then hopefully buy a new stronger light for my 2x2.. I am so pissed.. Mars Hydro sucks.. The build is amazing.. The components are awesome when they are not flawed.. But damn this is the 3rd light to crap out on me in 2 years.. I do nothing but run them 18/6 or 12/12.. Run 1 fan on top at the driver and heatsink and 1 under toward the diodes.. Nothing different.. I think I'm gonna buy the Wakyme J-2000.. It comes with 2 fans blowing on the heatsink.. Honestly, noise is not an issue to me.. Heat is.. I sleep with all my fans running already lol.. Its actually hard to sleep without them now hahah.. But yeah. It has a Meanwell driver.. Samsung diodes.. Dimmer.. And the fans.. I think it's my best bet at this point.. Fuck Mars Hydro.. They had 3 chances with me.. My Sunraise 1000 (blurple) is like 4 years old and still running strong.. Smh.. Mars Hydro is crap. How did they even get so popular??? I'm sure more people will realize how crappy they really are.. No name brand everything.. Runs hot as ass.. Craps out after 3 - 4 months.. So so pissed... Almost mid week.. I went ahead and pulled a couple branches down a bit.. The canopy is perfectly even.. It looks AwEsOmE! Lol Mid week.. Well, she seems to be doing a bit better than before, I'd say. Normally, my previous autos would be flowering and probably almost finished stretching by now.. Live and learn.. I hope all the Zkittlez Autoflower seeds aren't like this.. And hopefully this strain turns out pretty dank to be wasting a few extra weeks on growth but not getting much growth at the same time.. And I hope harvest doesn't come quicker than the swelling of the calyxes.. But shit happens.. I have Mars Hydro sending me a new driver/dimmer. I sure hope it's just "plug-in" because if I'm going to take this light apart, I'm just going to go with the Meanwell HLG-240H-54B.. From what I was told from LEDSupplier dot com.. The 240W would be better due to the different current. We are still trying to figure out if the dimmer is 0-10V to see if I can just keep using the Mars Hydro dimmer along with the MeanWell HLG-240H-54B.. That would be cool.. Sorry but Mars Hydro sucks.. I bet running a different driver would help alot of issues.. Maybe even run cooler. Anyways.. About the plant lol.. She is doing great.. The stiples are still showing some weird colors on the tips.. Doesn't seem like an issue.. Some plants have the stems change colors.. Some have pistils change colors.. Some have leaves change colors.. Maybe that is just in her genetics.. The pics that ILGM shows, it should be a pretty colorful strain.. Guess we shall see! But she is happy and healthy.. I think I'm going to stop using Hydroguard next week.. Just doesn't seem like it's doing much of anything.. I really only bought it to fight root rot when I attempt DWC which I am going to attempt again very soon.. Maybe after this grow... We shall see... Almost end of week.. Went ahead and defoliated/lollipopped a bit. She was getting too bunched together.. She is nice and opened up now.. 2 side branches stayed pretty short.. Not sure what that is all about.. Flowers are slowly forming at this point. Next week will be week 1 of flower and stretching should begin! She is still getting good light even with the power only being at 75%.. Just have it down lower.. Which I could get away with till harvest.. But fuck that. I ordered a new Mars Hydro TS 1000.. And Mars Hydro is also sending me a new driver/dimmer box to replace the old one.. Going to return the light and I still want to replace the stock driver with the MeanWell.. Trying to get more professional opinions before I attempt that tho.. So far, I am hearing to get the HLG-240H-54B.. The 150H (150W) doesnt have the correct current so I'd have to go with the 240H (240W) due to the output current and voltage to match correctly. Can't wait to try it out! End of week.. So I got a new Mars Hydro TS 1000 in.. It comes with a Moso driver instead of the old Juson driver.. Hmm.. Ok.. Seems to not heat up as much.. The diodes still get hot, but the lack of the driver heat should help keep things cool.. Nice... I am able to raise the light back up and run her at 100% power.. I went ahead and tied the branches down a little more.. There are 2 that are still staying a little short.. But I think it's the way I started the whole LST process.. I should have tied down a different 90° angle instead of the angle I used.. But live and learn.. Wont use that way again lol.. Other than that, the flowers are forming nicely.. Happy happy happy.. Next week will begin flower! Niceeee.. On to the next!!!...
Likes
18
Share
Brothers of the good and old Weed, welcome back to the diaries and gardens of your beloved Peaky! These beautiful veins continue to gain weight and their colors are enchanting .... I would make them parade to Hollywood for their elegance😝😜