🍨🌿🍦🍨🌿🍦🍨🌿🍦🍨🌿🍦🍨🌿🍦🍨 This girl put out some real amazing hues towards the end. Has a very pleasant aroma as well. She's on her last week in under light. I'll be harvesting this Beasty beauty next week. Gave Gelato a few good flushes over the last 10-12 days of plain RO, PH 6.5 With her initial flush done with a Flawless Finish soak. 🍨🍨🍦🍨🍨🍦🍨🍨🍦🍨🍨🍦🍨🍨🍦🍨🍨 ** Had some issues uploading her Trichome video. Eventually got it to post. Yay! Because we do 💚 them milky trichome forests. All is done for your appreciation of course. My fellow growmies make it all worthwhile. Eagerly waiting to indulge in this girl's fruity goodness. Good things come to those who wait patiently. 🍼💎🥛🍼💎🥛🍼💎🥛🍼💎🥛🍼💎🥛🍼 Until Gelato's harvest. Stay frosty 🥂

Day 1 repotting and start using nutrients

Day 36 week 5 22.01.2020 Plant is doing great but atm the grow rate is slowing down a bit or maybe it’s just me !!! I did cut her down quite a bit and that’s maybe why , other then that strong thick branches and a low profile like I wanted !! She’s ready to go into the bloom box as soon as I free up some space there what should be in a few days to a week !! She’s getting 2 best spot under lamp but still a prime spot I would say So from now it’s getting interesting so stay tuned

Day 35-42 (June 4th - June 11th) (Day 36) After it stops raining I’m going to amend some 2 gallon pots and get some of these clones planted. Tuna recovered nicely from topping. The wind keeps impaling the slurricane leaves on the mini garden stakes. If everything goes to plan, I will be transplanting all the slurricanes and tunas into 5 gallon fabric pots on the 21st. If they recover nicely I will flip them on the 30th. (Day 37) It’s looking like I fucked these autos up pretty bad with the hot soil mix and low night temps. It was a dumb idea to sow directly into amended soil. I guess I’ll just leave them and see if they can push through the nutes. The 4 meatbreaths I’m going to transplant into 3 gallon smart pots in a few days. They won’t be transplanted into their final containers until the 10th of next month. (Day 39) God I wish this rain would fuck off soon. I want to get some of these clones transplanted but can’t in the rain. Forecast says sun for the next few days then more goddamn rain. None of these plants are liking these low night temps. It’s currently 6 degrees (42f) which is guaranteed stunting. Zone 3 problems..... I honestly should have waited a little bit before planting the autos too. (Day 41) Weather finally let up. Got all of these clones and meatbreath’s in their new homes and looking happy. (Day 42) The gelato 33 autos are definitely doing better than all the rest for some reason. Grapefruit, Dr seedsman and exodus cheese haven’t even pushed their second set of leaves yet. Their containers are definitely too hot for seedlings but I will just leave them and hope they recover. Maybe the gelatos are just heavier feeders. Next year I’m going to establish the autos in coco before I put them outside. Or just start them outside in coco and transplant.

The weather in my country suddenly got warmer unexpectedly. That's why I'm having problems with the temperature. Still, it seems to be going well for now. I watered on the 51st day. I will do it again today and with full fertilizer.

Topped lil missy, leaves turning a bit yellow, we'll see how that works out. Didn't change anything in her feeding schedule so far. I'll try getting her in better shape 🤞🤞🤞

Oh my god. Apart from the yellowing they are looking fire. Lovely dense buds and smells insane. Loving how formed they are only doing a 7 week veg from seed. Probs my best looking plants so far but don't think I'm going to yield massive. Quality over quantity tho.

Greetings fellow growers 🖖 and welcome to my first grow ever. This adventure actually started several months ago when I decided to stop buying flower from dispensaries and just grow my own bud. How hard can it be!? This is actually my second seed of this strain. The first bean sadly died due to over watering (sorry girl, RIP). I was literally watering the cube to the point where water was dripping from the bottom, then heavily sprayed the humidity dome and tray with the vents completely closed. Everyday. Multiple times. I never let the dome or try dry out. So after about 8 days of not sprouting, there was a funky smell of rot. So that was that. Later I learned that rockwool retains a lot of water and can easily drown seeds. So a wet/dry cycle is best for rockwool germination. So even after hours of researching and digging through forums and tutorial videos, I was still under prepared for this journey. Did not consider how delicate the germination phase is. Oh well. Lesson learned. Reset and try again! I hope everyone is safe and stoned during this corona crisis. Just like everyone else in the world, I want this pandemic to be over with. But in the meantime, let's grow some weed! 🖖 [START OF WEEK 01] Day 01 - Monday - 08/03/20 - Total Days: 001 ----------------------------------- - [0830]: Light Schedule: 24Hrs/0 --- Soaked cube in 5.5 PH water for 10 min. Did not shake water out. --- NO NUTES! Only PH'd down to control the PH levels. --- Did not use the default hole (way too deep). --- Flipped cube upside down and made a shallow hole for the seed (less than 0.25" deep). --- Placed seed in and pinched hole close. No additional water added. --- Sprayed the tray and dome with straight water (5.5 PH). --- Vents are cracked opened a for ventilation (about 1/4 opened each). --- Distance between the light and tray was 53" --- AC was set to 80 °F --- Exhaust fan was set to 86 °F --- Room average temp was at 85 °F --- Dome humidity was at 85-99% when sprayed. --- Allowing to completely dry before respraying. - [2200]: Dome and tray were completely dry! Sprayed only tray and dome with more water. Day 02 - Tuesday - 08/04/20 - Total Days: 002 ----------------------------------- - [0845]: Sprayed dome and tray in the morning. Everything was dry. --- Hoping for the best! - [2130]: Everything was dry again, so sprayed dome and tray at night along with a light spray on the cube. Day 03 - Wednesday - 08/05/20 - Total Days: 003 ----------------------------------- - [0830]: Everything was dry again. Resprayed dome and tray. Slightly sprayed cube. - [2125]: Hooo damn!! She popped! Am little stub is visible! Resprayed dome and tray again. --- Still going 24/0 for lights. - [+0033]: Just checked up on her and I swear she grew a bit taller! Getting excited! Day 04 - Thursday - 08/06/20 - Total Days: 004 ----------------------------------- - [0845]: Wow! Went from a little stub to fully sprouted overnight! Everything was pretty dry again so resprayed dome and tray. - [2200]: Tap root is visible! Over 1" long too! Just resprayed dome and tray again. -- Going to prep for hydroton transplant tomorrow! Day 05 - Friday - 08/07/20 - Total Days: 005 ----------------------------------- - [0930]: She keeps growing! -- Added a bit of CalMag to the spray bottle (8 drops to 650ml of distilled water). Resprayed dome and tray. Water was at a 5.4 PH with 141 PPM. - [1045]: Prepped the bubble bucket with 4.5gal of water. Water is high enough to reach about 0.25" above the bottom of the net pot. --- Added 3 drops of Superthrive --- Added 3.5ml of CaliMagic --- Added 2ml Hydroguard --- Then PH'd down to 5.6 --- Solution Strengh: 120 PPM --- Water chiller is set to 20 °C - [1100]: Transplant time! --- Filled the net basket 1/3 with hydroton. When placed in the bucket, air bubbles are not visible, but are slightly below the surface (slight digging will reveal the water/bubbles below). --- Removed plastic on rockwool cube and placed in basket, then filled around and covered with hydroton. Making sure to block any light from passing through the net pot and into the nutrient solution. --- Covered with a half-bottle dome sprayed with the CalMag water from earlier. --- Hoping for the best! - [1300]: Raised Bucket 5" higher. Now light distance is 48" to top of bucket. - [1820]: Lowered tent exhaust temp to 76 °F --- Lowered AC to 75 °F --- Raised bucket even higher so light distance is 30" to top of bucket. - [2300]: Looking good! --- Sprayed dome and surrounding hydroton with more CalMag water. --- Attached timer to light! So new 18 Hrs On/6 Hrs Off light schedule. --- Lights On: [1600] (4pm) --- Lights Off: [+1000] (10am the next day) --- Decided to go with lights on during the evening/night and off during the later mornings/afternoon (the hottest part of the day) to see if temps can be controlled better. --- Please survive girl! Day 06 - Saturday - 08/08/20 - Total Days: 006 ----------------------------------- - [0800]: Everything was dry. Resprayed hydroton and dome. - [2000]: Here first night cycle seemed to go well! Get'n taller! --- Dry again. Removed the dome. --- PH went up to 6.5 so PH'd down to 5.7 --- Ran the top feed drip ring for a bout a minute to wet the hydroton and rockwool with the nutient solution. ---Too scared to leave the top feed on 24hrs (I don't want over water her and cause dampening-off). Will let dry before re-watering. - [2100]: After closer inspection, I think she's looking a bit yellow. --- Decided to add a bit of grow nutes to the bubbler solution. --- Added 2ml of Sensi Grow A --- Added 2ml of Sensi Grow B --- Solution strength after adding more nutes: 176 PPM --- PH went up to 6 --- I hope that the extra chelating properties of the 'PH Perfect' solution is enough of a buffer for proper nutrient uptake. Day 07 - Sunday - 08/09/20 - Total Days: 007 ----------------------------------- - [0800]: Water dropped a bit (mostly due to evaporation) so solution strength was at 190. --- Checked PH again. Was still at 6, so PH'd down to 5.4 --- Ran the top feed for a minute to wet the hydroton a bit. - [0915]: Since she's looking perky but still a bit yellow. So decided to up the nutrient concentration even more before lights out. --- Added 2ml more of Sensi Grow A --- Added 2ml more of Sensi Grow B --- Solution strength after adding more nutes: 199 PPM --- PH went up to 5.8 - [1700]: Checked nutrients. --- PH: 5.9 --- Solution strength: 202 PPM --- Added 4ml of Voodoo Juice --- Added 4ml of B-52 --- PH after adding more nutes: 5.9 --- Solution strength after adding more nutes: 238 PPM - [2130]: Decided to make a new foliar spray to address the continued yellowing. --- Started with 500ml of distilled water. --- Added 3 drops of CaliMagic --- Added 3 drops of Sensi Grow A --- Added 3 drops of Sensi Grow B --- Added 3 drops of B-52 --- Added 1 drop of Superthrive --- Solution strength: 164 PPM --- PH was at 5.9 and did not adjust. --- Gave her one spray. --- Also sprayed the surrounding hydroton. [END OF WEEK 01]

Gießen - 💦 Week 6: P-K 7-5 Boost! 1,0 Liter je Lady / Tag Düngen 1x pro Woche gem. angegebenen Schema. Die letzte Düngung 🌺🍁 anschließend lediglich Osmosewasser PH 6,5 mit 1,2 ml/l Calmag. Sanlight Evo 3-60 100% (1000-1200 PPFD) Temperatur: 23-25 grad Celsius r.Lf.: 50-55%

A wonderful genetic thank you Dutch Passion❤️‍🔥🤩 The trim was super easy the buds are FAT & FROSTY full of resin & the smell ABSOLUTELY out of this world!

Plantas sanitas 11 semanas. Se ven bien saludables con flores recinosas Y grandes.

Noch immer habe ich und die Pflanzen den Schock über den ungewollten high Stress nicht über Wunden 😪 Leider war die Wachstum Phase zu diese Zeitpunkt fast vorüber. Zum Großteil hat es ausgerechnet die stärkste Pflanze erwischt. Diese ist nun die kleinste und schmächtigste geworden 😭 Meine Lampe bekomme ich nicht mehr höher, dieses Mal habe ich sie mit Hilfestellung ein letztes Mal höher gestellt. Ich war kurz davor diese Grow abzubrechen, doch dann packte mich wieder der Ehrgeiz. Da dieser Grow auch schon sehr Zeit und Energie aufwändig war. Meine größte Befürchtung ist jedoch ein unbemerktes zwittern und nachher alles voll mit Samen ist 😱 Am 75 Tag musste ich den unteren Bereich entlauben, dieser bestand nur aus Fusselärmchen und die ersten Blätter waren auch schon sehr hell.

420Fastbuds FBT2305/Week11 These lovely ladies are getting super close to being done. Getting excited when opening the tent as these two just draw your attention straight to them. Flowers are super dense and smell mesmerizing. Looked at trichs this past week and noticed some amber showing up so I'll wait until I see about 10% until they get chipped and trimmed up to start drying on the rack. All in all Happy Growing

the week went we'll they grow by the day. I fed them sillica , Alaska fertilizer and molasses. there not showing many hair yet one is a little. I topped one of the plants the larger one. the gentics are top notice .i think there vigger is amazing. lots of structure should yield well

Getting ready for flowering! On day 45 I placed a metal grid (90x90cm) on the bottom of the pot and a same one on the top as a scrog grid. Then I did a huge defoliation removing as much as I could under the net, exposing many small colas that were covered by upper leaves. On day 46 I didn’t switch off the lights in the night, so the princess has been awake for more than a day. I switched off the lights in the morning. After about 30 hours of darkness, on day 47 I switched lights back on and set up the timer for the switch to 12/12. In this first week I’m waiting for the plant to empty the reservoir, then 2 days of flush, and will start kicking bloom nutes (with fungi, bacteria and sugars) at half dosage next week.

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny REMO NUTRIENTS 👍 Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Plant is 8 weeks from seed today, stretching has now stopped and she is starting to fill out now. It looks like the feed will sit at 2ml A +B to a litre as she hasn't shown signs of wanting anything more although pk 13/14 will be added in roughly 3 weeks time. She's been drinking a lot more last few days

Ewerything works and im so bananas right now and broud of those ladys that comment will be, Start u'r own project and dont race becouse somebody may have 20+year of more info and they get moster no epic size planta but thats the goal be like pro at this lifetime. Aint do any modification only extra bag of co2 and wery mild start nutriments so stay in tune!

en lineas generales bien el cultivo. la genetica es buena aunque no esta muy estabilizada. no es resistente a los hongos, la cola mas grande que estaba vencida sobre otras plantas tiene botritis ne la parte baja de cada cogollo con lo que se habran perdido facil 30g en seco.

Info: Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Have fun with the update. Hey everyone 😃. Another week of beautiful growth goes by 😀. She continues to develop very well and beautifully. All shoots were topped up again. I think I'll go back a few more times do topping before it goes into bloom :-). The tent was cleaned and the humidifier refilled 👍. Otherwise nothing exciting happened this week. I wish you all the best and have fun with the update 👍. Stay healthy 🙏🏻 You can buy this Strain at : https://www.zamnesia.com/de/4532-zamnesia-seeds-gorilla-glue-feminisiert.html Type: Gorilla Glue ☝️🏼 Genetics: Chem's Sister x Chocolate Diesel 50% Sativa/50% Indica 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .