This wee was all vegative two phase. On day 7 this week the two shorter plants were transitioning to generative one phase. These girls are so fast the phases come and go quickly. This Last week was raining or cloudy everyday. I had to switch to dry nutes because the soil is staying wet. Feeding liquid nutrient mix/teas isn't an option. I've found a few specs of PM on the one plant I didn't top. I treated with Arbor bio fungicide and it's clearing up. The other two are showing immunity so far and are receiving no treatment.The nutes are listed as ml/gallon of soil topdressed. After day 2 inspection I believe I ran the nutes a little hot. They should grow into them. Adding a second topdress of 800ml of coop poop 2-4-3 on day 6 this week. We got a big rain day 7 early morning. It washed that coop poop topdress in and really gave the plants a good green color.The one that didn't get topped is pushing 64" the others are about 57" so I used an average. I recommend topping but to keep that one from falling any further behind I let it grow without topping. The one that wasn't topped is being treated for powdery mildew with Arbor bio fungicide. It's helping the other two are still showing immunity and are further along in flower.

Plantas sanitas 11 semanas. Se ven bien saludables con flores recinosas Y grandes.

Had to isolate one of the ladies due to being a week+ behind the other which involve putting in her own resvoir other four are starting flush. Also had to remove and clean the connection "T" as the roots were plugging up the "T" and restricting flow back to the res. The buds look amazing and am really looking forward to the pay off.

GTH SEED #1 in training, just super cropped on one side to even conopy. The first site im recording will be a clone,it is on back side of plant and will not produce. #2,#3,#4 pics,#2 is stripped of leaves at about 12 inches. 06/16/18 #4 is showing pre-flowers,#2,#3, no sign yet. #1 check in the morning. 06/19/2018 Still no pre -flowers on #1,#2,#3, #4 however is female so I Fimmed her to encourage side shoots to grow biggest of wider canopy. #1 reacting well to supercropping 20 tops as of today. Praying she is female🙏🙏. She is a stretchy girl in flower 2 to 3 x her vegged height so trying to be low profile as possible.👍

Been a good ride for my first plant

Day 106, Flower Day 50. Looked at Trichomes this morning. GSC still showing some glassy/milky look. Bubba is pretty milky colored. Still needs at least a week. Went on vacation last week. Had somebody else water. They closed the door, so not as good air circulation. Bubba showed powdery mildew. Not yet severe, so I took the plant outside, trimmed off some fan leaves that showed mildew. Then I sprayed the entire plant with a 25% milk solution (whole milk) and let it dry. Back in the tent. Cranked up the inline fans and added a small fan to the Bubba tent. Just need a couple more weeks.

Hey there, as the clones are almost ready and I will transplant them in the aeroponic system tomorrow, I allowed myself to get the pH and EC ready and stabilize it over a night. 😏 August, 20th: 23 of the 30 clones made it to the system and are now growing fine. Guess those 7 clones that didn‘t make it were old ones from below the mother plant. SanLights at 40%. ☀️

HELP!!!!!! My roommate went crazy and i think hes planning to kill me and smoke me!!! I'm not even bullshitting right now!! He has been depriving me of food off and on for weeks to see how little he can feed me before I get sick. This motherfucker has me tied up in a closet right now! Thats not even the worst part, he comes in and cuts my leaves off....MY LEAVES MAN😢! So please please please help me!!!! Theres no telling what kind of weird shit hes gonna do to me next. I never even got to flower man it cant end this way!!!! Oh shit here he comes🤫................"IT PUTS THE BUD SITES ON ITS STEMS, OR ELSE IT LOSES LEAVES AGAIN"

Sorry for the delay on the updates guys I am a daddy of a newborn baby boy and it's really time consuming plus the Mary ladies but we keep on the great work nothing wont stop us we go all the way up! Alright here you go Day 87 Starting week 13 Day 88 Gorgeous grapefruit smells like heaven Day 89 Again sorry for the late update but being a first time daddy leaves you without time Day 90 She's gorgeous isn't she? (alright guys so what happened here was that I started flushing too early and took advise from other canngrower and instantly added again all nutes, that's why I left her a lil longer until week 14 when I started to flush again, we are going to show you very well what we did, since it was our first time we were unsure if flushing at week 11 was alright but then we decided at week 12 that she could stay longer and she did) You might say we wasted some nutes but in terms of reality we did not, because we have a full bottle of 3.7gal mix with flora nova grow and flora nova bloom in the other, measuring ppm always to make sure we got the correct amount, otherwise we add more water or more nutes depending on the plant needs but we never waste away all precious nutes are precious resources, in this part of Latin America is really hard to find anything good, so we got to bring everything from Europe or United States that's why we doing the best we can with the money we got. Hey any donations are more than welcome if you guys like what we do, yeah it's risky around here but we don't give a F. You know that patients need their medical cannabis and Id say I'm one of them And by the way very proud Peace and love canna growers We will continue to fill the grow diaries

***Note that I started to count the days when I placed the seeds between paper towels. The seeds were planted 3 days later and sprouted from the ground 2 days after being planted. D49 (12/04/2021): I bought Gaia Green power bloom 2-8-4 and top dressed the plants with 2 tbs. / gallon of medium. After showing deficiency, I felt that my plants needed more then just hen manure. I also bought shrimp compost to make proper compost tea. D54 (17/04/2021): I made a compost tea with shrimp compost, sea weed extract and phytoplankton soil enhancer. I continue to defoliate and remove leaves randomly when leaves are blocking light to bud site. Glue Gelato is amazing!😍 She's starting to bulk and her pistils are getting longer. She's also starting to have some trichomes. I'm expecting the smell to ramp up this week 👌 Banana Kush has stretch a lot and she is as tall as Glue Gelato but less bushy. Gelato is really smaller so I lifted the pot with wood block so she can get more light. It's been only few days and I can already see that she appreciate receiving more light 👍 - Light: the lights are at 100% and at 12 inch form the plants. - Temperature: during the day: 24-26C ; during the night: 19-20C. - Humidity: the humidity is maintain around 48-50% all the time. - Air circulation: There is an oscillating fan on the ground, one fixed fan pointing on top of the canopy and one fixed fan to help cool the lights. - Water: I gave water every other day or when the ground feel dry or the pots feels light. This week, I almost gave water everyday.

Week 26 - bud shots! Growmies, why did I defoliate so late? Look at these nugs. Had I taken more leaves away earlier, they would've gone bigger. But I'm not complaining. This is going to be a HUGE harvest and a new record for me. The buds are frosty and the smell is so yummy. I want to harvest them already but my weather station predicts another week of sunshine so why waste it? I'm really happy with this strain. It's uncomplicated and seems to thrive despite my neglect. Well done, Super Sativa Seed Club. And thanks again, Johnny, for believing in us

Jungle is growing on top of my washing machine! On the last day of week 6 I lowered lights to 35cm from canopy, this week I’m going to monitor that number and adjust as necessary because the plant is still in stretching + bud setting phase. I’m feeding with high N+mag and I’ll continue until growth slows down, than I’ll switch to megacrop 2parts. I expect that to happen end of this week, 10 days max. Day 42 - changed the fan Day 44 - finally installed the blumat auto irrigation system. It wasn’t that easy since branches are really near the substrate but at least I had the carrot already placed so I was able to do it. High frequency fertigation on coco is a must, you can’t take advantage on coco great qualities watering 1 or 2 times a day. My system has 5 drippers placed in a Pac-Man shape, more or less. Day 45 - This is an important day since it marks the halfway point of this crop, based on my previous results. Coincidentally I’ve also spotted few small trichomes on a leaf, I guess the plant is now ready to build up mass and flavors. I did a minor defoliation to open up the inner canopy and to get rid of some plant’s nitrogen reserve. I prepared 20L of my bloom solution and mixed that with the veg solution in the reservoir. For a week I’m going to use this transitional feeding. Lots of sulfur, seems to be on a volcano 🤣 Day 46 - spotted a minor P deficiency. There is probably too much calcium in my solution that is antagonizing P absorption. I mixed another batch, this is the ppm breakdown N 100 P 100 K 280 Mg 85 Ca 150 Before I had P 40 and Ca ~190, my tap water has 80ppm of Ca that is already counted it. I’ll keep this value for a couple of weeks than I’ll lower everything except K. (Edit from the future - K is too high) Day 47 - plant looks happy and bigger, it drunk 3+ liters yesterday. There is no need for humidifier anymore so I’m getting rid of it. Temperature is 30-32C with 50-60% humidity. Day 48 - buds are swelling, some branches are already showing the spiral structure. Plant drunk 5 liters yesterday, impressive.

04/10 empieza la 4ta semana, la semana que empiezan a formarse las flores, parece que el riego con cal - mag + top bloom funcionó. 05/10 se riega con 2 litros EC: 0,5 ph: 6.4 07/10 se riega con 3 litros de agua. Se uso agua de ósmosis inversa + Cal mag para llegar a EC 0.4 y se agregan 4.5 ml de Big One de top crop. EC final 0.5 PH: 6.4 No hay drenaje, parece haber tenido sed estos días 10/10 último día de la semana. se riega con 5 litros de agua para obtener drenaje porque sospechaba que el ph estaba bajando nuevamente y otra vez me encontré con el ph del sustrato en 5.8. Voy a empezar a regar con el ph en 6.8 o 7 hasta corregir eso.

Halli Hallo liebe Growfreunde 💞 Soweit läuft alles immernoch problemlos und stressfrei👍💪😁. Habe mal die Trichome gecheckt, alles noch sehr klar, wenig milchig. Ich denke durch die große Entlaubung liegen sie etwa 10 Tage zurück. Heute ist Blütetag 54, aber die Entwicklung passt eher auf Tag 40-45 würde ich sagen, was meint Ihr? Wo sind die ganzen Experten??😅😅😅 Finde es so schade dass man hier übersehen wird, weil es einfach zuviel Diaries sind. Würde mich freuen euch in meiner Facebook Gruppe zu haben. Ihr seid damit herzlich eingeladen meine lieben. Teilt eure Erfahrungen und Emotionen mit der Community 💗 die Gruppe heißt: "Cannabisanbau für Anfänger und Profis" und folgt mir für News: "GreenRoom-Anbau und Austausch" Das ist mein Profil 🤗🤗🤗🤗🤗🤗🤗🤗🤗🤗🤗🤗🤗🤗🤗🤗🤗🤗🤗🤗 Zurück zum Thema..😅 musste diese Woche ein Netz spannen, die Buds werden schwer, die Peyote Critical und die Lemon Shining Silver Haze brauchten etwas Unterstützung bei tragen😉 vom Entwicklungsstand her würde ich sagen die Critical ist als erstes fertig. Hat laut Breeder auch die kürzeste Blütezeit. Mal sehen was kommt

I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"

July 27: starting the second week of force flowering by providing 10 h darkness in garage plus ‘2 bonus hours’ from the 730 nm far red light. The use of the far red light is like getting a 26 hour day. So 12 h dark plus 14 h sunlight. Anyway, she is stretching a bit and clearly starting to flower. Looks good. New growth is pretty yellow so did a foliar spray of Epsom salts to give her Mg and S. July 30: great conditions the last few days and she is growing great. Mostly just pHed water lately to avoid over-doing it on the nutes. Looks healthy and happy. Aug 2: watered with some molasses and about 1 tbsp per gallon of Epsom salts (MgSO4). Still doing 10 h in dark garage and using the 730 nm far red light to get an extra 2 h in dark mode.

All these beautiful girls are going thre flush now getting ready to harvest up they are all very resiny an covered in trichromes all the nugs are nice an dense an are smelling amazing can't wait to be able to dry an start curing them

Earthbox pics of Strawberry Truffle s1 | Perpetual grow 👽🐢👽🐢 harvest coming on new moon, flipping veg tent👍

We are starting the cultivation of a new, fast-growing strain Amnesia X3 Turbo Feminized from Seeds Mafia. The seed was germinated in a paper towel and sprouted within 24 hours. Afterward, we carefully planted it in a 1.6-liter pot filled with a specially prepared soil mix: 50% soil, 10% perlite, and 35% coco substrate. The daytime temperature is 28°C, nighttime temperature is 21°C, and the humidity is maintained at 65%. The light schedule is set to 18/8. A big thank you to Seeds Mafia for providing the seeds, we're excited to see how it develops!