Auto Maxi Gom is making progress. She is shifting more into a stretching, and stronger pre flowering phase. She should start developing more colas in the next weeks to come. She is just doing her thing, and making progress. Thank you Xpert Nutrients, Medic Grow, and Seeds Mafia. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"

Ze Chem Bang is growing well. I did a solution change today. I switched her light times 2 weeks ago. Sorry I missed a update. She was lollipopped, and defoliated to open her up for stretching. Nothing else is really going on yet. Thank you Terpyz Mutant Genetics, and Spider Farmer. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g.

Hi all growers and lovers of green 💚🙏😎 Gorilla Girl XL Auto by Sweet Seeds About this grow All going very well😎💚 just checking and enjoying in her presence.. DLI is 40-45 Happy growing I wish for all 😍🙏😎💚

This girl was a fast finisher harvested on day 46 of flower, nearly 7 full weeks.

Week 3 ( 28 Jan 2020 - 04 Feb 2020 ) 29 Jan 2020, day 15 It's third week for my small grow room :) I'd say everything is fine, like 7/10 fine ;) One plant shows signs of a problem - leaves are twisting. Beside that there is nothing else to be worried about. I also increased the light distance from the plants and reduced nuts a little. In the same time I switched the light mode to full spectrum. Hope it will do. Done some LST as well, bended plants away from the light, hoping that it will affect their final height. Now I'm running three humidifiers :D :D two controlled by higrostat, one on a timer. Keeping optimal Rh is a challenge here. 3 Feb 2020, day 20 Third week is comming to the end. Now it became noticable how much faster than other strains White Widow is :) It outrunned other plant : +speed autos, Cream Caramel and Old Mandarine with about twice their height ! :) It now is a challange to keep all the plants at the same distance from the light like the others. I will try to bend White Widow down a little next week :) Beside that, everything seem to be perfect. Wish me luck! Will keep ya posted :) Wish me luck and may the luck be with you !

The use of monster bloom is really showing. I put it once a week and the next day the flowers are already bigger. It's beautiful! The smell is getting better as well.

Growing great in week 8 day 2 bloom fed her the last time going to do winter frost and straight water out the gate I started supplementing phosphorus and it fatned them buds up some these girls are heavy eaters

We are in Flush !! Was giving them GH Flora series + rapid start + cal mag

Best

Good afternoon gromies 😄 😇 😊 Week 9 was absolutely crazy. All my girls start to achieve an about high. NYC diesel is a smallest as she was but developing beautiful small hairy flowers 💐 😍 😇 Have a good night, You Lovely Girls Growers 😇 🙏 😉

Ausser etwas Streckung nicht viel passiert. Zur Zeit täglich ca. 3 liter (gedüngt) durst.

All of the girls are growing nicely, except for one of the fast buds mystery autos Apple strudel #1 Training up to be very easy. Most of the branches are long enough for me to stretch out and take up more surface area of its pot. Apple strudel#2 About a week and a half ago he got the bottom part ate up By ants or some other bug. So I topped this plant as to make more tops And hopefully bring back the nodes that I lost Sweet skunk a little bit smaller than the rest, but it is also younger though I am kind of going for a bonsai style with this plant. I don’t believe it’s gonna be super large but hopefully I can make it look cool. It does have some decent branch areas where they are stretching Mystery auto #1 plant is growing up with a beautiful structure for the most part I have grown naturally without much interference. Occasionally I hold down the top with a garden staple to let the lower branches get some light and to give the plant some healthy LST, once the branches get longer will hopefully be able to stretch it out even more!!

At the end of week 6 the buds are bulking up and the trichomes are going milky with red hairs pulling in will wait for more amber trichs before harvest which I anticipate around week 8-10.

All the girls have popped out of the soil & are doing amazing except of my free (northern lights) but other than that I’m ready to see what comes of this grow! Stay tuned & show your support no NEGATIVE COMMENTS💙🙏🏾

we just finished 2 weeks are are going into the 3 week. These ladies can EAT!! 1,000 ppm’s and no issues..looks like I have to up the ppm’s for bloom phase 4 out of the 5 are doing GREAT. The 5th one is having issues and I know it’s the media I am using. I had a different brand of soil for 1 of the banana MAC’s and it freaking SUCKS!! I am amending with Iron-Tone by Espoma to get the green back and it has some cal-mag also with sulpher ( hits all suspect deficiencies). The other 4 are in Mother Earth soil which I have had zero issues with. I will be sticking with Mother Earth for awhile. 11/6 Potassium deficiency in the banana MAC’s…kinda of a good sign. Let’s me know the plant is going into bloom phase and it’s time to change the ratios from 1:1:1 to 1:3:2. The 1:3:2 is flower girl 1 week and fish bone meal with Langbeinite the other week. I will alternate between the two for 4 weeks. Tuesday ( 11/8) will mark 3 weeks. I did defoliation and lollipoping today. This is the second one I have done ( I do the first one the week before flipping).

Ladies looking good just flipped 12/12 Lights for flowering Scorpion Diablo And 2 1000 hps

Very nice this is my 4th run with triple and seems i have now mastered her! With extra supplements and additives i was able to acheive this beauty! She has very nice structure and potencty is up there! I recommend this to anybody!!! She smokes like 30% strain The Teprs are out of this world 😍 The buds looks 10/10