Likes
Comments
Share
The Sensi Seeds Research breeding project has created eleven cannabis seed varieties. How? By combining new cannabis cultivars with a selection of strains from their long-established cannabis gene bank. For the first time in thirty-six years, they are opening the doors of the Sensi Seeds Research and Development Department. Week #5 Plants are doing well, there’s not much to do except to let them grow. Roots are filling the pots, I might transplant them in their final pots (18l) during next week. The Mars-Hydro SP250 has done a very good job during these 5 weeks. The plants need more space to grow, I will have to switch on the HID next week to give some more light coverage. Giving them a light feed during the week using Cellmax BIO 8-2-2 (not listed) and not Organic Grow ☝️ In my quest for plants science I have found something interesting about the Dr Cleve Backster 😊 but apparently controlled experiments that have attempted to replicate Backster's findings have failed... weird isn’t it ? 😳 (I’m looking for a job in the Cannabis industry as Master Grower, Mineralogist, Quality Control)
Likes
17
Share
The papaya cream aroma on these is absolutely wonderful!
Likes
4
Share
I stopped feeding last Friday, and they’ll be on plain water until harvest. I’m not convinced by the lack of proper experimental evidence behind flushing, but I wanted to try it myself since so many people report a difference. I’m planning to harvest in about 7–10 days, aiming for a less sedative effect, while still preserving terpene production.
Likes
107
Share
ALRIGHTY THEN GROWMIES 😎 👉SHES PRETTY MUCH READY JUST WAITING ON THE AFGHAN TO DRY TO MAKE ROOM ON THE HANGERS 👈 👉Although we have just hit week 15 shes done , love the colors and the hint of berry mixed with kush 👈 Was a blast to grow thanks for hanging in there and following me on my journey👊 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈 👉NutriNPK NUTRIENTS USED FOR FEEDING 👈 👉www.nutrinpk.com right now get 10% off using SPRING2022 as the coupon code👈
Processing
Likes
6
Share
Looks so beautiful and smells even better, so in love with this strain, has surprised me a lot, I would love to grow her again, very nice plant, maybe not the best in yield but quality is assured. 🤤💎🌱
Likes
18
Share
Que pasa familia, vamos con la cosecha de estas Tropicana Cookies Fast Flowering, de FastBuds. Por dónde empezar, las flores son bien compactas , y van repletas de resina, tienen tonos rosados por dentro muy bonitos, y tiene un aroma súper dulce aunque engañar engaña porque saber sabe más tropical y cítrica. Es muy sencilla de cultivar, es de ciclo bastante corto aunque también si le dais una semana más no pasa nada agradecer se agradece al final. Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Hasta aquí todo, Buenos humos 💨💨💨
Likes
12
Share
@BudXs
Follow
Ya boiiiii. Sick ass genetics ready for the poppin. Will be running one of these girls on Miicrobial Mass against the other. Samesies with some other fastbud cuts
Likes
4
Share
@DRO420
Follow
Buds are forming nicely, slowly lowering moisture going to stay at 40% till last 2 weeks. The Transition to Bloom formula is now complete and they are receiving full bloom nutrients.
Likes
4
Share
For FW3 no fertilizer. Last week of growth I added 50 g of Wizzy's Flower-Fertilizer, which lasts for the whole flower period. Also this week no booster, only tapwater, but I need to increase the temperatur of it, since it always causes a shock when watering the plants. Still no problems with pH, micorbiology takes care of that.
Likes
50
Share
Room setup rundown, examples of bud, et al in pictures... Seedlings/Clones lights - Viparspectra XS1500. Vege lights - Mars Hydro FC-4800 Flower Lights - 650w 3400K 1900umol/s PAR, (3) 226w DIY 2900K 630umol/s PAR (678w and 1890umol/s), Substrate - 50/50 sphagnum peat moss and vermiculite in 5-gallon pots Climate Control - Luckily, the lights, winter and normal furnace use all equate to a decent temperature, though a bit on colder side in in vege phase, sadly. Humidifier is needed early and later a dehumidifier is needed when canopy develops. I only grow in the winter months. Irrigation - do not use the emitters in this diary. They suck a big fat dick to skip a line to suck a bigger dick. Use the pressure compensating type. https://growdiaries.com/diaries/232811-strawberry-cookies-og-r1-cherry-diesel-bbgs-ego-epg-ebg-grow-journal-by-001100010010011110/week/1366923 -- use something similar to those. They come in different shapes, too. Basic process The little light takes care of seedlings in 2.5" wide seedling pots until first up-pot. The 1-gallon pots fit well under the FC4800 in a 4x4 tent until day 21 after sprout. I plant 150% or more of what i need, so i can kill the weak without concern. The goal is for every plant that makes it to the 5-gallon up-pot being capable of producing a minimum of 160 grams with a maximum of a 35-40 day vegetative phase. Third up-pot is into 5-gallon nursery pots and now under the 3 DIY lights and the 650W light in the big tent for a couple more weeks of vege. An irrigation system in the big tent saves a lot of time. One scrog for training and another for support, just in case. Reverting back to a more systematic approach to canopy composition moving forward. About 2.3 colas per sq ft and 8 primary colas per plant. Yields were similar when over-crowding and being less systematic, but the proportion of less dense nugs is greater and trim time is needlessly elevated because of that fact. I was very controlling about this the first couple years but got away from it for far too long at this point. Drying / Curing - Into mesh racks for 9 days. I wet trim and cut down to similarly sized buds for even drying. Temps are controlled around 68F and RH is set to 60%. Then into some 5-gallon buckets with gamma seal lids and (3) 2-way 67g boveda humidipaks (58% or 62%) in each bucket - 1 at bottom, 2 at top. Temp/RH probe confirms that they hold the RH steady at 60-63%. Cost - 0.33 cents (USD) per gram produced. This includes an accelerated depreciation expense for all equipment used, fertilizer, water, electricity for all equipment used, new filters and other yearly purchases - bti, ph strips, sticky traps, etc. I'm a finance guy, so these numbers are comprehensively accurate and purposely err slightly on high side of cost. The only facet not included is the cost of my labor.
Likes
18
Share
@ODNTrick
Follow
Cut the little Canuck on day 75 before dawn and placed in tub of clean water for 4 hours to remove debris. Then hung under a shady tree to dry excess water. Very dry breezy day. By evening I weigh it at 168 grams stem and all. Then hung upside down bag open to dry. It was beginning to wilt after 48 hours... hopefully long enough to break down some carbs. I’ll be checking every day an if rain threatens I’ll put in shed. Hope to trim and bag in shed after 7 days to finish drying. Pyramid is ready to cut. It will get the same treatment. I know this is a little unorthodox and a bit risky getting the plant so wet before drying. I feel like it just gives the plant an extra day to use up any nutrients and break down those starches.
Likes
18
Share
@Diips
Follow
Its starting to look more like a forest from each day that goes on. frost also starting to appear already and we are still early in flower ;) d.66 all good in the hood, ill will try to pull those 2 who are very close to the light more back to the wall, so the lower stalks can get light and space d.66 a little bit of bamboo and lst done without problems 🌞
Processing
Likes
9
Share
@russrahl
Follow
Girls are looking great so far! I added about 2ml/g to the reservoir and the plants responded well. Got a good explosion of growth over the last few days. I was able to start LST training the largest of the 4 today and the other 3 will be a day or 2 until they will be ready to start LST. Had some Ph issues during week 4 because my pen decided to go wonky. I tried to calibrate it again and had a hard time. So I busted out an older one and decided to calibrate it and see if it worked still... calibrated in a few min and sure enough res ph was well bellow 5. So water was changed as it was time anyway and ph’d proper just before lights out so we will see what happens tomorrow.
Likes
39
Share
They’re finally getting there now. Trichs are filling up nicely and they’re ready for a flush. Going of run some flawless finish through the roots for 8 hours and then fill the res with plain water for a few days. Some beautiful looking buds on these. So dense and they smell absolutely amazing. Looks to be some really good wait on the blue sherbets. Love barneys strains they always deliver.
Likes
6
Share
Welcome to Flower Week 2-3 of Divine Seeds Auto Fractal I'm excited to share my grow journey with you all as part of the Divine Seeds Autoflowering Competition 2025. It's going to be an incredible ride, full of learning, growing, and connecting with fellow growers from all around the world! For this competition, I’ve chosen the Feminized Automatic strain: Auto Fractal Here’s what I’m working with: • 🌱 Tent: 120x60x80 • 🧑‍🌾 Breeder Company: Divine Seeds • 💧 Humidity Range: 50 • ⏳ Flowering Time: 60 Days • Strain Info: 23%THC • 🌡️ Temperature: 26 • 🍵 Pot Size: 0.5l • Nutrient Brand: Narcos • ⚡ Lights : 200W x 2 A huge thank you to Divine Seeds for allowing me to be a part of this amazing competition and Sponsoring the Strains. Big thanks for supporting the grower community worldwide! Your genetics and passion speak for themselves! I would truly appreciate every bit of feedback, help, questions, or discussions – and of course, your likes and interactions mean the world to me as I try to stand out in this exciting competition! Let’s grow together – and don’t forget to stop by again to see the latest updates! Happy growing! Stay lifted and stay curious! Peace & Buds!
Likes
6
Share
@DRO420
Follow
Flowers are showing and getting bigger