Temps at Day between 20-23 °C Night 17-18°C Humidity like 60-65%

Jelly Donutz auto showing some beautiful buds growing already! High humid levels of 70% are stressing me out this time around however I have ordered the Hydrone 5 from AC Infinity to help with humidity levels this late into flowering. Thanks for tuning in growmies! This is the way

08/30/2021 - Noticing more gnats than usual. Could be overwatering, anaerobic soil conditions, or both. - Going to set up fly traps, starve both the plant and the gnats of water for about a week. - Will observe any stress responses due to an extended dry period.

Pulled her at day 55 of flower which is earlier than I expected. I was planning on pushing 70 days but the trichomes on the tops and mids had a good amount of amber on them. Final smell is the most common phenotype - maple syrup and butter smell. Quite strong smelling too. This plant started off very stunted due to the hull of the seed remaining stuck to the cotyledon leaves for around ten days after germination. It deprived the cotyledon leaves of light to photosynthesize and also caused them to warp. Many people would have restarted possibly. The genetic expression on this one ended up being quite wonderful. I’m really excited for when she’s dried up and cured enough to vape some of it in around 2 weeks. I’m super happy with the combo of my soil and blumat. The worms in the soil seem healthy and abundant which seems indicative of really healthy soil.

6° Semana- Aeroponía - Están muy bellas las raíces, están 100% sanas. Se realiza poda apical al quinto nodo,una pequeña defoliación y luego se aplica LST a las más grandes, muy contento con el crecimiento actual. --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 6th Week- Aeroponics - The roots are very beautiful, they are 100% healthy. The fifth node is topped, and a little defoliation and then LST is applied to the largest ones, very happy with the current growth.

Frost is all over and she smells incredible. The buds are getting bigger and bigger. Cant wait to sample her 😋 She got a little defoliation on day 66, nothing crazy.

Quite happy with her after 9 days from germination

FBA2502 Plants 1-6 Week 7 May 11– 17 FLOWER 3 Nutrients : Micro 25 ml Gro 10 ml Bloom 30ml CalMag 30 ml Recharge 10ml Green sensation 16.5ml Power buds 7.5 ml 5/11 PH 6.56, PPM 1560, temp 69 2ltr each 5/12 PH 6.31, PPM 1120, temp 68 1 ltr each 5/14 PH 6.66, PPM 1280, temp 70 1 ltr each 5/15 PH 6.66, PPM 850, temp 72 1 ltr each 5/11 Defoliation, feed, pics & videos I made 4 gallons, used 3 to water then poured the runoff back into the rest in the bucket. The next feeding, I added a gallon of tap water to residual and ph to 6,31 temp 69 & PPm 1120. Did the same on 5/14 and 15 using up the remainder of the feed solution. I must monitor and control the tent environment manually. For the past month, the humidifier has been an issue putting out way too much humidity; often leaving water in the bottom of the tent. In addition, the temperatures are also out of control. I added an AC last week to keep the temperature below 80. I finally determined the exhaust vent is also broken and has been for some time. I have been giving good reviews on the AC infinity system. However, during the time I’ve owned this tent (2 yrs), I had to replace the lights twice, fans, humidifier and now the vent twice also. Everything but the tent containment has been replaced. AC infinity does stand by their products, but they are in California, and it takes at least 2 weeks to receive the replacement. This is extremely frustrating at the critical transition to flower for my equipment to fail again. For the time being until a replacement arrives, I pulled the 4” exhaust vent from my 3x3 and hooked it up. I have the AC pushing air in and the exhaust pulling air out. This should create a neutral pressure tent environment-neither positive nor negative. I do have 3 circulating fans in the tent to move air around the plants. It looks like growth spurts have slowed and plant height has been reached. Now is the time for buds to fatten and frost up. All of them (6) are short remaining less than 3 ft. They range from 15 to 31 inches. The tallest #4 &5 and #6 have very light leaves and appear nutrient deficient compared to the shorter phenotypes. Pictures taken later in the week show fading on a few the older leaves. All are receiving the same solution and are in the same soil blend. Moving the gals in and out of the tent for their glamor shots, I bent one limb and snapped another. The bent one I taped with a splint and the snapped one I medicated manuka honey and wired it back to the main stalk. Leaves look like sativa leaning. I hope FBA2502-2 is a good daytime. I’m getting excited to see what develops in the next month or so. News Break: I’ve been informed that 2502 is FastBuds New Frostbanger and is indica for nighttime. I’m disappointed that I didn’t get a sativa to test because I really need a daytime strain. The 2 Blue Cheese plants I just grew are also nighttime. Upon opening the tent, a faint odor was detected, and some stickiness was observed during the process of defoliation. Pictures of the puffy buds even show differences. #4 &5 buds hairs are different from the others being crinklier and the others are straighter. Some like #2 &5 are showing frost on the leaves. Wow at the beginning of flower to have that much frost. They are living up to the new strain’s name. I’ve noticed that when I water, sometimes water shoots out of the side holes I the air pots. I will pack the soil firmly into the sides for future runs. Measurements: #1 15” #2 20” #3 17” #4 30” #5 31” #6 24” Your likes and comments are appreciated. Thanks for stopping by. Growers love 💚🌿 💫Natrona💫

My "sideways" Tangie seems to be doing okay. She's on 12/12 atm and is one of the first ones to test out the "new" closet under the stairs, let's hope she likes it 😋🤞👍

Added nutrients to top off reservoirs everything looks good …I am content so far with testing will be dropping light schedule to 11 on 13 off to accelerate bud development hopefully shortening flowering time

Eccoci di nuovo qui!!! Super eccitato per questa nuova collab con Sweet Seeds, team davvero al top, che mi ha dato l’opportunità di testare questa nuova genetica e di condividere i progressi con tutti voi!!! Come sempre partiamo nei bicchieri per poi travasare.. Questa volta verrà svolto tutto sotto la Lumatek Zeus 465 ProC, mi aspetto molto da questo ciclo!! Settimana incredibile!!! Grazie a tutti per il supporto ❤️🍀🔥

Fed with nutrients 8/29 Start of week 5 flower : 8/30/25 Fed with water 9/3

Plodding along

Long Veg, day 44 little defoliation

🍇🍇🍇🍇🍇🍇🍇🍇🍇🍇🍇🍇🍇🍇💦💦💦💦💦💦💦💦💦💦💦💦💦💦 Grape Gusher getting the chop sometime this week, just waiting for a little more amber trichomes on the calyx. Smells like grape loud 😁.

Flower18, riego con 6.2 pH y EC 2.2, pequeña defoliación. Flower22, riego con 6.5 pH y 3.0 EC. Hoy las plantas me han sorprendido, están creciendo mucho sus flores, se están viendo muy llenas. Me preocupa que por el espacio muy justo, puedan generar hongos, tendré que colocar tutores para separar un poco las ramas y mejorar la ventilación poniendo 1 o 2 ventiladores extra, quizás darle más potencia al extractor también. A parte de eso van súper bien 😁

Animal Mints — Legends of the Frozen North Part 2 — Drying, Trimming & Preserving the Harvest Before we begin, once again, we want to apologize for dividing this harvest into multiple reports. We know it can feel like a long journey to follow week after week, but honestly, this is the only way we can properly document everything in the level of detail that these plants deserve. Harvesting, drying, trimming, curing, resin collection, storage methods, smoke reviews… all of these stages are part of the final medicine. And instead of rushing through it in one giant post, we prefer to slow down and share every step in the most educational and transparent way possible. So welcome back to the frozen north. This is Part 2. ⸻ Ten days later, the room had completely changed. The giant living plants we harvested in the previous report had now transformed into hanging medicine. Slowly drying in darkness, at around 18–20°C and roughly 60% humidity, allowing the moisture to leave the flowers gradually instead of forcing them dry too quickly. For the first couple of days, humidity was brought slightly lower to help remove excess external moisture, but after that, conditions stabilized again for the slow dry we love so much. And then came that moment every grower knows. That little click. That beautiful snap in the branches that tells you the plant is finally ready. Not too wet. Not too dry. Just right. And honestly… after seeing these girls hanging there for days, fully intact, massive branches swinging slowly in the dark, it was finally time to begin the next ritual. Trimming day. ⸻ Gloves on. Scissors ready. Trim bin prepared. Medicine beside us. Mr. Baggy supervising operations as always. One branch at a time, we carefully broke the plants down by hand, slowly removing each flower from the stems before shaping every nug individually. No rush. No machine trimming. No shortcuts. Just patience, resin, and respect for the plant. And these Animal Mints girls absolutely covered everything in trichomes. The moment trimming started, the gloves became sticky almost immediately. Thick resin building layer after layer until eventually it rolled naturally into small dark hash balls directly from the fingers and gloves themselves. This is one of those little moments we genuinely love about harvest season. That sticky resin coating the gloves is essentially concentrated trichome resin — cannabinoids, terpenes, waxes, oils, and all the aromatic compounds that make the plant what it is. With a little warmth from the hands and gentle pressure, it naturally rolls together into traditional finger hash. Simple. Ancient. Beautiful. And of course… we also continued our little Moroccan-style “drums” with the trim. By gently agitating the dried trim across the screens, we collected an absolutely beautiful amount of dry sift. Bright golden-yellow resin, soft and sandy, full of aroma and life. No exact scale numbers this time — this was more about enjoying the process than chasing statistics — but the quality spoke for itself immediately. Honestly, this type of hash is one of our favorite ways to enjoy the plant. A little inside a joint, slowly melting together with the flower, enhancing both flavor and depth without overpowering the experience. Pure magic. ⸻ Now let’s talk numbers. And honestly… these girls performed beautifully. Plant A gave us: 127g Plant B gave us: 247.8g Plant C gave us: 287.9g For dense, compact, heavily resinous flowers grown 12/12 from seed, this is an outstanding result in our eyes. Especially considering the morphology of these plants. This style of growing continues to impress us more and more every single run. The plants remain relatively compact vertically, but the flower production becomes incredibly efficient. Tight node spacing. Massive bud stacking. Heavy trichome production. Strong support structure. Dense flowers without absurd plant height. The frozen north delivered once again. And standing there in the studio holding entire branches in both hands… honestly, it was impossible not to smile. Happy grower moment. ⸻ Once trimming was complete, the next mission began: Preserving the terpenes. Because harvest means nothing if the cure is bad. So this time we decided to test multiple storage methods side by side. Some flowers went into traditional glass jars — still one of our absolute favorite methods for long-term curing. Stable, simple, reliable, and something we continue to trust deeply. Some flowers went into vacuum-style Zamnesia metal containers, where air can be partially removed while maintaining stable conditions inside. Others went into vacuum plastic containers with pressure-sealed lids. And finally, part of the harvest also went into Grove Bags, since the yield was simply too large not to use multiple preservation systems. Inside several containers we also added 62% humidity control packs. These packs are not “magic terpene creators” or anything like that — they simply help stabilize relative humidity inside the container, preventing flowers from becoming either too dry or too moist during curing. The flowers themselves were already dried correctly before storage. That part is important. Humidity packs are not there to fix bad drying. They are there to help maintain stability afterward. And honestly, one of the most exciting things now will be revisiting these exact same flowers months later to compare how each storage method affected aroma, texture, smoothness, and terpene expression over time. Because curing is alive. Medicine changes. Terpenes evolve. And that journey is part of the magic too. ⸻ One thing we also want to mention is how much easier trimming became with the curved point Zamnesia scissors. It might sound like a tiny detail, but those curved tips genuinely help reach deep into dense flowers without damaging structure, allowing cleaner trimming while preserving the natural shape of the buds. Small tools. Big difference. ⸻ By the end of this session, trays were full, jars were packed, hash was collected, gloves were destroyed by resin, and the studio smelled absolutely unreal. pine, diesel and earthy. Animal Mints is looking amazing. And honestly… looking at those giant trimmed branches in the studio lights, it was one of those moments where you simply stop for a second and appreciate the entire journey from seed to harvest. Because this is more than growing plants. This is preservation of flavor. Preservation of resin. Preservation of time, patience, and intention. ⸻ But we are still not done. Not even close. The next report will be the final chapter of this frozen journey: the smoke review, terpene breakdown, curing evolution, flavor analysis, effects, and our complete final thoughts on Animal Mints from seed to harvest. And trust us… This girl still has a lot to say. ⸻ Huge thanks once again to everyone following this journey: Zamnesia for the genetics, Plagron,FOG Lighting, the gear sponsors, the community, GrowDiaries, the growers supporting from day one, the silent followers, the commenters, the critics, the legends, the OGs… And of course, thank you to everyone taking the time to read these reports week after week. The frozen north continues. 📡 DELETED @ 1K Please stay tuned.we never quit https://www.youtube.com/@TheDogDoctorOfficial NEW 🙏 Thank you for your patience and continued support. FOR DISCOUNT CODES AND MORE JUST FOLLOW THE LINK https://website.beacons.ai/dogdoctorofficial 📲 Don’t forget to Subscribe and follow me on Instagram and YouTube @DogDoctorOfficial for exclusive content, real-time updates, and behind-the-scenes magic. We’ve got so much more coming, including transplanting and all the amazing techniques that go along with it. You won’t want to miss it. GrowDiaries Journal: https://growdiaries.com/grower/dogdoctorofficial Instagram: https://www.instagram.com/dogdoctorofficial/ YouTube: https://www.youtube.com/@dogdoctorofficial Deleted by Youtube - https://www.youtube.com/@TheDogDoctorOfficial NEW Vimeo : https://vimeo.com/dogdoctorofficial Under construction stay tuned ⸻ Explore the Gear that Powers My Grow If you’re curious about the tech I’m using, check out these links: 🔆 Lighting & Environmental Control • Future of Grow — Advanced LED lighting technology https://www.futureofgrow.com/ DISCOUNT CODE: DOG20 • Lumiflora — Under-canopy LED lighting https://lumiflorade.com/ • TrollMaster — Environmental controllers and automation gear (past collaboration) ⸻ Genetics • Zamnesia Seeds — Genetics used in this project https://www.zamnesia.com/ ⸻ 🌱 Soil, Substrates, Boosters & Root Support • Plagron — Substrates, bio mixes, and supportive products https://plagron.com/en/ ⸻ 🎒 Storage, Curing & Preservation • Grove Bags — Curing and storage solutions https://grovebags.com/ ⸻ 📸 Photography Equipment & Tools (Not sponsors, but part of my creative toolkit) • Sony A6700 • Sony full-frame macro lens + few more • Stacking photography workflow - learning • iPhone (for behind-the-scenes shots) As always, this is shared for educational purposes, aiming to spread understanding and appreciation for this plant. Let’s celebrate it responsibly and continue to learn and grow together. With true love comes happiness. Always believe in yourself, and always do things expecting nothing and with an open heart. Be a giver, and the universe will give back in ways you could never imagine. 💚 Growers love to all 💚 📸 P.S. – The Eye Behind the Lens All photos in this diary (for now — except for the ones showing the camera, which I took with an iPhone) are taken with a Sony A6700 paired with a Sony full-frame macro lens and a few more. Photography is part of the story — it’s how we share the fine textures, the glow, and the quiet details that words can’t always capture. I’ve also started experimenting with photo stacking — a technique where multiple images, each taken at a slightly different focus point, are layered together to create one perfectly sharp image from front to back. It’s not digital enhancement or AI; it’s pure photography — a way to reveal the plant’s beauty in microscopic depth, from trichome to petal. You’ll even see a few shots of "ghost me" capturing the shots — camera, lens, setup — because every grow deserves not just to be cultivated, but documented like art. FOR DISCOUNT CODES AND MORE JUST FOLLOW THE LINK https://website.beacons.ai/dogdoctorofficial NEW DISCORD - Official Server Invite Link : https://discord.gg/ksjAkA5T74