This little monster is shaping up nicely. This is the budget tent and she is directly under a single 60 watt HLG 3k panel now. There is a mars hydro 300 on the other side of this 2x4’. So far it looks like I’ve got 8 or 9 cola sites and I can’t wait for the stretch. My nutes are nectar for the gods organic and I’ve been giving her full strength veg on the intermediate schedule. Next watering I’ll switch up to the flower at half strength. I’d like to note that I’ve also been using bloom khaos in that line as a foliage spray but like with my other diary I’ll probably have to finish with kool bloom powder to get any sort of swelling. #dinafem # HLG #foxfarms

Start of week 7! Week 6 went really well. This GG#4 lady is looking amazing, with her purple colors and plump buds! This lady is also on an 8 week schedule, removed big bud and added overdrive to the nute lineup.

MintLickz »»» Unknown Strain Mintz x Lickz It's a 2-year-old clone(probably an f4-f5 clone can't remember how many times I take a cut and grow a new one) I selected from 9phenotypes this one was the best bag appeal for sure. The last time THC test was 19.30% I hope to get better THC and also flavors At first, I just kept her veg for years and didn't bring her to flowering but after I got into Wolfpack Discord and showed her up. Jay Wolfpack and some people came through my inbox and offered to exchange my clones with their fire breeder after just seeing the live flower. So this is why I decided to flower her again Light and Enviroments💡💧 Light 18/6 (06.00 AM - 12.00 PM) Aim VPD around 0.7-0.9 Temp26-28 RH70-80 DLI 16-18 PPFD 200-300 22/2/24 Water 15L+Silica m/ fulvic 16ml(half) @0.1ec +V1 130ml @1.2Ec+V2 125ml @2Ec Ph 5.4 +Silica m/ Fulvic 25ml @PH6 Ec2.1 @11.00PM -Up to 6.2 @08.00AM Feed 5min - around350ml per cubes 23/2/24 Last batch mix @ph5.7 2.30min shot 180ml 25/2/24 Tray Water 5L+Silica mix Fulvic ml+Bushdoctor 5ml @0.3Ec +V1 40ml @1.3Ec +V2 35ml @1.9Ec +Root Exceluration @2Ec Ph 5.8 200ml per cube 26/2 Veg Foliar last 5min before lights off 28/2/24 Water 16L+Rhino Skin 15ml @0.1EC+Calmag 15ml @0.3EC PH6.9 + V1 125ml @1.2EC+V2 120ml @2EC PH6.2 adjust to PH5.6 Tray FEED 1min(60ml) @27/2 at 11.50PM 28/2 Feed 11.00 AM 30Sec (30ml) WC from 52% goes up to 59% 02.42 PM 30sec Dryback right now is 15% for 24hrs ⛺ Feed 08.50 AM 1.30Min 02.25 PM 1Min 04.50 PM 1Min hand watering to adjust any underwatering Defoliation most big fans leave in tents

Esta semana fue bastante positiva en el desarrollo de la planta,los riegos con un ph más bajo y la ec en valores óptimos, lograron mejorar un poco el color de las hojas.Tambien a los nutrientes que veníamos regando se le sumo el big bud, veremos que es lo que pasa en el transcurso de la siguiente semana. Creo que en términos generales la planta va creciendo saludable. 🤞🤞😅

Juste un mot presser d’y goûter😋

they are all thriving, growing exactly as i want them to. sucking up everything i give them and they are on daily feeds. some of the autos are starting to flower, but im gonna stretch out veg for atleast another 4/5days for photoperiods. they are ranging in height between 45 and 75cm. west coast OG auto from fastbuds been the tallest at the mo. dinafem cookie strains showing preflowers now and everything going fine. no problems as of yet in the slightest. daily updates.

Just finished week 6 and I have to say she is looking so healthy and started to fill out lovely now 😀 gave her a couple of leaves trim as they was starting to overgrown the leaves below and wanted to give the plant much more light to help her grow to her potential. My earlier worry about being stunted with early progress issues has well and truly disappeared as you just continues to grow from strength to strength! Happy days happy growing !

Pineapple Chunk dursty an growing, defoliated what was touching the soil Watering every 2 days Runtz developed next Noodie, transplanting in 3L Pot by End of the Week 2 and starting Vegetative Sta Watering all 3 days

Hey everyone 😀. These weeks they have continued to develop very well 👍. They have made a huge leap forward since they were repotted 😃. They will be topped again this week, and will then move to the flower tent next week 😍. I am very curious to see how it will develop until next week. I wish you a lot of fun with the new update, stay healthy 🙏🏻 and let it grow 🌱🍀 You can buy this Strain at : https://sweetseeds.es/de/cream-caramel/ Type: Cream Caramel ☝️🏼 Genetics: Blue Black x Maple Leaf Indica x White Rhino 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .

1/20/2023- So much to do pre grow and over the next 16 days, absolute first order of business is that I have to take down my current Grow---TIMBER-- Then I have a list of things I have to get done in order to be ready to start this grow 1 Feb. With that said T - 2 days until start 48 hour Flush T - 2 days until Start 48 hours of Light T - 4 days until TIMBER!!! Items that need to be done before 1 Feb 2023 1. I need to clean the tent out 2. I need to clean the equipment- Proper Sanitization between grows in Hydro is a must!!! 3. I need to get the hole in the ceiling above my tent repaired- For my last grow I had a deep sink installed in my grow room, to make Hydroponics a little bit easier and have a water source in the same room. The seals on the pipes they were installing broke and leaked through the ceiling causing some damage all the way across my grow room, I was already weeks into my grow and couldn't risk them working above my tent and it would have been very awkward positon for them to be working in as well, so have to get this done quickly between chop and germination. 4. I have to install my new light- I was using a Vivosun 4000 and for this grow I am switching up to a Spider-farmer SF 7000. 1/20/23- For this upcoming grow I am working with M/F photo seeds so I ordered 4 Sex determination kits. I recieved my my 4 Sex determination testing kits from Rimrock Analytics today. I will be using these to test my plants at week 2 of Veg so that when/if I take clones I know I am taking them off females. As well as I don't want to accidently pollinate my tent during this grow I am looking for big beautiful buds not seeded buds. :-) 1/24/2023- Harvest of current grow- Started at 2:00pm and finshed wet trim and firt batch into the freeze dryer. 1/25/2023- Next batch into the freeze dryer and cleaning all my equipment for this Grow. T-1 Day until the workers are supposed to be here to fix the hole in the Grow Room. T-3 days until I instll my new Gorilla Grow Tent and my New Light Spider Farmer SE-7000 for this grow. T-7 Days until Start of Germination 1/26/2023- Harvest is done ran through the Freeze dryer and dry tim completed. 1/27/2023- Grow Room repairs completed. Hole is gone Letting the paint dry before I install the new tent. T-2 days until Install the New Gorilla Grow tent and the new Light T-3 days until I put the hydro equipment in the new tent T-5 days until Germination 1/29/2023- Day 0- Final Pre Germination activities Germination Start T-3 days The paint on the ceiling was dry and it was time to finish prepping for Germination. I got the following items knocked off my list. New 4X4 Gorilla Grow Tent is up and ready New Spider Farmer SE-7000 Light is installed- Thanks Moony Grows for the suggestion and for the Code that got me some money off and free shipping (Moonygrows)!! I turned the lights all the way up to max and set the timer to 18/6 0600-0000. I will keep an eye on the temperature and humidity without my plants and see how hot it gets with the new light. I put my Hydro system back together and put in 40 gallons of water into it, time to monitor for leaks the next few days. I Setup my cloning machine for Germination Days 3-11 1/30/2023 let me break down the situation, ROOM in the TENT.. Enough said.. No really I tried putting my exhaust system up in the new tent with my new light, The light is so big corner to corner that it really didn't give me enough room for the lights be be raised, with the exahust hanging the buckets my plants are Starting in are 2 and 1/2 feet off the ground, great for plenty of room for roots but not so great for upwards space for the plant to grow. In a 6' 11 tent with the exauhst in side and hanging that only gave me a little over 4 feet of grow room to play with. My last grow if you saw my diary, anyone could tell I was struggling to keep the buds off the lights. No good, Since space was such an issue I was running my carbon filter inside on the ground but It really needed to be up sucking the heat out not shooting the cool out. With that setup I was sucking air through the filter and pushing it out the tent at a bottom exhaust hole cold out. Wasn't doing me any good for my heat. I was hitting temps of up to 85 degrees. I bought a portable AC unit and have been running it in the grow room to try and keep temps below 85 and I have had to lower the power on my lights during grow also not ideal.. With that said a friend of mine MoonyGrows (Check out his diary) took the time to look at my issue send me a picture of my grow tent setup with detailed instructions on how to suck the air out from the top but putting my filter and fan on top of my tent so no room issue and I am sucking the air out from the top where the heat is instead of pushing the air out from the bottom where the cool is... THANK YOU MoonyGrows For taking the time to help me get this straightened out.. Now I have room and I have the exhausts working right and now my temps with everything at 100% are topping out at 80 this dropped the temp by 5 + degrees at 100% max. T-2 days until Start of Germination Prepped my seed tray with humidity dome Prepped my Rapid Rooter plugs. I Used RO water, and I added a few drops of Hydrogen peroxide to Oxygenate the water. I then PH balanced between 5.7-6.0 the same that they will be getting in the Cloning Machine and when they get to thier final grow pod. I perfere the 5.8x range and I hit 5.84 for these rapid rooters. If you want to see a complete video on the process HowWeedGrow has an amzing video that shows step by step how to do it and explains it better than I ever could including how to plant the seeds. Which I will cover when I get to that step on Wed. https://www.howweedgrow.com/how-germinate-weed-seeds-cannabis-rapid-rooters/ 1/31/2023 T-1 day until Germination Start All set and ready have my Rapid Rooter plugs ready to go have my seeds out.. Have my seed tray warming up tonight. Tomorrow morning right into the Rapid Rooter then strait into the tray. I will spray the dome to start the humidity in there. 2/1/2023 Germination Day!! Let the games begin! 0600am Put the seeds into the Root Riots. And then put the seeded Root Riots into their first home the Seed tray. I have them under the light 24/7. Sprayed the dome 7:30pm Sprayed the Dome to keep humidity going on the dome. 2/2/2023 Day 1 of Germination Sprayed the Dome in the morning Sprayed the Dome in the evening 2/3/2023 Day 2 of Germination Roots are starting to come out the bottom of the root riot plugs and the heads are slowly popping out of Number 4 just below the surface. Afternoon- Number 4 has popped up Evening- Number 3 has popped up as well. Happy Dance!! 2/4/2023 Day 3 - Germination Surprise Surprise Surprise- all 4 have now poked their heads up.. Happy day!! 100% Germination succeeded. Now major milestone to track is how many are female and how many are male. I will take look at the roots this afternoon/evening and see if they have enough root to go into the cloning machine for the next 7 days before they go into their Hydro Pods. Day 3 - Germination - Evening.. Roots looked good and they were tall enough to make it into the cloning machine. Now that they are all in the cloning machine I have switched the lighting to veg state 18 on 6 off. 2/5/2023 Day 4 - Germination - Morning All the Ladies (fingers crossed) looking great stretching nicely and look nice and green, Photo synthesis underway.... UPDATE!! After a very interesting POD cast on FSTS by Dr. Bruce Bugsbee from Utah University, I have shifted my lighting to 24 hours on through seedling and then I am going to shift to 20 hours on the rest of Veg. 2/6/2023 Day 5 - Germination While Checking on my conditions inside the new tent last night, I found that the Humidity was down to 39 Percent. I added an AquaOasis Cool Mist Humidifier, the reason I selected this humidifier is that I needed one that could be turned on and off utilizing my Inkbird Humidity Controller IHC200 that I have my Pro Breeze Dehumidifier currently running with. Root structures are starting to get there about 1/4 of an inch. 2/7/2023 Day 6 - Germination Everything seems on track more roots poking out of each today. They are each getting a little taller as well. Checked in the evening and number 3 was drooping the Root riot plug on the bottome was dry and the roots were not in the water yet. I raised the water just enough that the longest root that was sticking out is now hitting the water. 2/8/2023 Day 7 - Germination Everything looked good while checking in on them this morning number 3 is now full up and no droop again. 2/9/2023 Day 8 - Germination T-2 days until Plant into Forever Pods and we start week 1 of Veg .. :-) Surprising thing to me is that number 1 and 2 were later in popping then 3 and 4 but the roots are growing longer in 1 and 2. 2/10/2023 Day 9 - Germination Number 1 and Number 2 are definitely ready for transplant today.. Based on how they were yesterday and where they are today I am hoping by tomorrow 3 and 4 are ready. Today they look to me where 1 and 2 did yesterday.. I really hope 3 and 4 catch up by tomorrow since.. T-1 day until transplant to new/ final home for grow. Need the roots long enough to have some clay down in the basket to keep the root riot out of the water and only roots in the water.. 2/11/2023 Day 10 - Germination Today they got placed in thier forever Home, 7 days from Sprout and 7 days until Week 1 Start. PPM- 180 this is water out of the Tap Temp Water: 70.7 Temp Tent: 77 Humidity: 40% I have a humidifier going 24/7 to try and bring this up.. I also have Humidity Domes on each plant. 2/12/2023 Day 11 - Germination Sprayed the domes, all are looking good.. Nothing much to do at this phase but Keep monitoring the PH level in the system and making sure they have a comfortable home. T-6 days until Week 1 start 2/13/2023 Day 12 - Germination Sprayed the domes, They were looking a little yellow today so I moved the light down to assist. Nothing much to do at this phase but Keep monitoring the PH level in the system and making sure they have a comfortable home. T-5 days until Week 1 start 2/14/2023 Day 13 - Germination Sprayed the domes, They were looking a little Florissant yellow today, with what looks like slight burn on the tips, I talked with a fellow grower and we agreed that It was probably that I was drowning them, Yes you can drown you plants even in Hydro, but only early on.. :-) It usually happens with the water being too high, which soaks not only the roots but the medium (root Riot plug in this case). I lowered the water from touching the bottom of the pot to about 1" away. This will probably take 3-4 days to resolve. I will continue my daily monitoring. T-4 days until Week 1 start 2/15/2023 Day 14 - Germination Sprayed the domes, continue my daily monitoring they look a little darker green instead of lime green now that I lowered the water levels in the system, so I think that I might have resolved the issue but it will take a few days for recovery to happen. T-3 days until Week 1 start 2/16/2023 Day 15 - Germination I looked in on them this morning, 3 and 4 look like they are doing well and recovering nicely. Number 1 not so much it has brown spots on the leaves, this very well can still be a side effect of the overwatering but I decide to go ahead and add Nutes earlier than I was planning just incase. I was going to wait until Saturday but I think intervention is necessary now especially after drowning them early on. I added 1/2 what I am planning on adding for week 1 start. I also think I am going to adjust my chart to add 1/2 2 days after plant from now on. I don't think it would hurt it to have some Nutes to pull from. .25ml/Gal Calmag = 12.5ml 1ml/gal GH FloraMicro= 50ml 1ml/gal GH FloraGro = 50ml 1ml/gal GH FloraBloom = 50ml T-2 days until Week 1 start = I will drain the system and start it over on Saturday with Week 1 Nutes. 2/17/2023 Day 16- Germination I didn't even want to post today after looking in on them this morning, 3 of the 4 are now showing signs of dronwing.. Brown spots on the leaves, the water levels were still too high.. I drained about another inch out of the tanks.. Will see how quick they recover.. I start week 1 tomorrow and will have to ensure my water levels are at least 1" away from the basket on this round.

Hello. This is the end of week 3 and the beginning of week 4 of flowering. Plants are finished stretching now and on their way towards fattening up. The resin has started to flow now and I can see some on the edges of the upper fanleaves. Good sign. I showed in the video that I blast oxygen into the reservoir water before the pump turn on. They get 3 minutes a day of solution The 15 gallon reservoir will last 6 days if I do it that way. And I change the reservoir solution and clean on the seventh. I water with rain water when they get dry. The rainwater here is around 6.5 ph. And It's soft water too. It's been a cool spring here, but next week the high temps are coming. I'm going to have to put up some shade cloth on the green house then to try to keep the temps down in there.. OK. Be Great. Chuck.

Despite the deficincies I'm still happy with the result! I used Coco/perlite as medium and found some deficincies in the very beginning and at the. For a next grow I would probably add worm castings and silicium flash for a better start. Place the tabs in a bit later so they last the entire grow. Use orgatrex and bactrex more throughout the grow. Update after drying: End result is 31 grams of small and fluffy buds. Not my best result and most likely caused by the deficincies early on in the grow. Smell and look are all right. Waiting some more for curing before I will taste them.

I guess due to the colder weather, she really starts to express her color and it's so amazing! I can't believe how beautiful this outdoor automatic is and how fast the colors are changing. As you can see from the photo, the buds are getting a bit heavy, so I tied them back in place. You might also see that one of the side branches, which broke during the storm, starts to let their leaves hanging. I moistened the point where the stem broke and see how she will do tomorrow. If it get's more dry, than I'm hanging it in the bathroom (which doesn't get used atm if you're wondering) Anyways I'll trim off the leaves with no trichomes on it and give her the very last week before harvesting on Monday.

26/07/20 (Sunday) Plants were starting to exhibit signs of light burn so I switched back to the 75W bulb. SVG never seemed to recover from having it's cotyledon damaged so I decided to take a risk and fed all of the seedlings 20-20-20 nutrients except the D.R. which I thought would've suffered shock, so I just watered it. 27/07/20 Decided to mist the plants with a homemade pesticide mix today because they're readying to be introduced as full time outdoor plants in a week or two so their sun basks are getting longer. 28/07/20 Noticed what looks like new growth from the first true leaves of the SVG, fingers crossed it's making progress. 29/07/20 The new growth from the SVG has split into two on both sides leading me to theorize that it's abandoned it's main stem (for now at least) and started two new stems. All other plants are working on new nodes and are showing a steady growth of .5cm a day. I've decided to revert to the 100W bulb because I believe I've misdiagnosed the light burn. 30/07/20 Today I left them outside for their longest sunbask to this point; 7 of their 18 total hours was provided by sunlight. The SVG now has two new 3-leaf true leaves on each new stem confirming my theory. Also starting to see signs of a minor mite problem on one of the leaves of my TT plant (Though it's new growth that wasn't sprayed with my homemade concoction.) 31/07/20 New growth has already begun sprouting from between the new true leaves of the SVG with no visible progress on the 'abandoned' main stem. Also had a power outage for 2 of the plants 18 hours. 01/08/20 Today the plants again stayed out in the sun for longer than previously making 8 hours in direct sunlight. I've decided to keep them in the grow tent for a further week because when I went to retrieve them the Jam was blown down flat by winds and had started to grow bent towards the light, so I doubt it's stem is ready for that daily beating. I raised the soil level and massaged it back into shape and it seems to be back on track. The D.R. is slowly beginning to bounce back from being stunted in the seedling tray and from it's third node (from the bottom up) of 3 leaf true leaves has turned into 5 leaf leaves. The SVG has made a major recovery and seems to be on it's way to even surpassing the others by the end of the week. The TT is officially the sturdiest of the younger seedlings and it's growing right behind the Jam in terms of node development. All in all this week was an overall success growth wise and I'm looking forward even more to week 3.

Hello. Wow! There has been a lot of color changing going on here. I'll be harvesting in 6 days. I've flushed 3 times so far and I will do 1 more flush before harvest. I had a extra #2 clone and put it in the garden, where I harvested the onions. I wanted to test for powdery mildew and pest resistance. I took some tester/taster clippings and they will be dry in a few days. Nothing else for this week. Have Fun. Chuck.

It’s the 9th week of flower and this run is slowly coming to an end. Mimosa is by far the fastest finisher here. In 8 weeks there is around 30 % amber trichomes in the top buds. A little too much for my taste. I ve reduced the ec in the medium of mimosas to around 1.0 and took the drippers out. Now they will dry out fully in around 1 or 2 days and I will chop. The rest is more or less similar and will go for about a week more.

Moved to a bigger tent and added two additional plants so I could have everything in one spot. The plants in this diary are on the left side of the tent and along the back wall. The other plants are another GSC clone that is a little smaller, and a Wedding Cake from Seedking.com. they are being grown the same way as the others. I'm very impressed with how the GSC clones are flowering relative to the gorilla glue. They are just way more dense and bigger flowers. Fingers crossed the gorilla glue fills out.

Esta semana apesar de tener temp Máxima de 28... se va recuperando bien de las podas, el led de TodoGrowled funciona perfectamente para sus 55w farmers!🍁

This was our second time growing weed and cinderella 99. The first time we didn't have the ideal lighting, so we decided to buy better ones and we could see the difference. We decided to test other techniques like main-lining and lollipoping that gave very interesting results. We also made feminized seeds, so we learned to make our own colloidal silver and that also forced us to learn how to clone, which by the way worked out very well. We got three healthy clones and after using colloidal silver they all produced bags of pollen that we used to pollinate the mother plant and some other plants from the grow. Happy with the result, but we want more! Already planning the next cycle and look forward to sharing it!