Likes
Comments
Share
@ibbzy
Follow
Week 1 of flowering! Top dressed and now we wait and see how this stretch goes
Likes
11
Share
@Coughy
Follow
Good stretch this week, I haven’t lollipopped at all, not even in veg. It’s fairly leafy everywhere and I want to get in there and defoliate bottom 1/3 soon. A lot of dead leaves I imagine, just been so busy and been neglecting the grow. Funny, how when you first start out and you’re overly micro-managing and then as the months go by, it starts to become a chore. I ordered a light from China, a Meijiu (HLG)550 V3. HLG Canada didn’t want to give me a decent discount so, unfortunately had to ship my money outside the country. Saved 50% for a quality light though. Might take a bit to get here, been processing in Hong Kong for 4 days. So far the leaves are healthy but last run they started to turn deficient after the stretch. In my defence, with the last grow, I was just starting on the dry nutrient regimen and made mistakes. Hopefully it stays healthy throughout bloom cycle with new changes and knowledge. New reservoir this week as follows: Partial drain, most of it gone, but 100mL RO added and; 40 gram cal nit 30 jacks 30 mag sulph. 100mL mighty bloom enhancer 100mL head masta 300 mL h2o2 25 mL Fulvic 40mL Humic pH ended up high with addition of bloom enhancer, added pH down to 5.8. PPM 1360. Wednesday-Day 10 Added water and some nutes. PPM 1200 pH 6.0 Started a small section of lower 1/3 defoliation Day 11 Did some more defoliation, added a video to show progress. Day 12 Finished lollipop on right plant. Moved some branches around. Added 20 liters and 20g cal nit, 10g of both jacks and magnesium sulphate.
Likes
17
Share
Likes
11
Share
Tuesday, February 9 Fed plants on Saturday 3/4 gallon each. I added 1tsp/ga of Bud Candy and 2.5tsp/ga of Tiger Bloom by Fox Farm. Water was @6.3 pH. I also fed Monday February 8 in the evening. Gave plants a compost tea made with 2 cups of Dr Earths flower bloom, 1 cup of powdered bone meal at a 4-12-0 ratio, and also added 2.5tbs of un-sulfured molasses to 2.5 ga of water @6.4pH. I let tea brew for 24hrs with an aquatic aerator. Bud sites appear to have white pistil hairs continuing to grow and multiply. Stalks look healthy and I’m glad to see the plants finally progress! Temps have been ranging b/w 76F-82F with RH b/w 43%-56%. Ive raised the light as tall as I possibly could to keep stalks from touching the light and causing some burning. Ive also added some bamboo stakes to help provide support to some sites that were touching the LED light, I've also changed to shorter, rubber block supports for the pots to sit on instead of the taller rolling holders to help lower the plants and allow for a little more growth. Excited to keep y'all posted and as always, stay safe and happy growing💚✌️🌱 Wednesday, February 10 I watered plants 1/2ga each @ 6.25pH with only CalMag and "Great White" Myco to promote healthy rhizosphere activity. I mixed 1.25tsp/ga of CalMag and 0.5tsp/ga of the "Great White". Plants are showing steady growth and the one on the far left seems to be ahead of the other two, makes sense seeing as it was in soil 10-13 days prior to the other two before the early growth medium issues. I can't believe its taken this long for these Autos to begin flowering but Im just glad that they appear to at least finish out now. This has been a great learning experience not only about gardening and this plant but also the opportunity to learn a good deal about myself as this has become a form of relaxation and reflection for me. Keep y'all posted, stay safe and happy growing💚✌️
Likes
5
Share
@Chubbs
Follow
ADVANCED SEEDS WEEK 3 AUTO PURPLE DIESEL This week has been exciting the growth has been phenomenal. I would say it's probably been 4in of growth this week. The shade of grren shows no signs of issues. I did add a little GH Calimagic to the feed so will see how they take it. All in all Happy Growing
Likes
13
Share
I ordered a new bigger setup as you can see. Switched from LED to HPS. Although it has a significant heat output diff, I can tell the plants love it. I also noticed I developed some fungus nats in the soil of the smaller plants. I finally got a soil meter to help me know more exactly when go water which should rid the fungus nats if I'm not over watering. Lastly, I'm going to scrog this week. I know I'm doing it rather late but it's a learning experience and I'll start sooner next time. Will be a lot of weaving. And I'm still deciding if I should cut everything else below the screen.
Processing
Likes
73
Share
Gave the photos a haircut today. Removed some fan leaves and lower branches that wouldn't amount to much. Gave the branches to my horse because he loves them! Tried enticing the ducks with fan leaves but they weren't having any of it. They prefer lettuce, not "The Devil's Lettuce"😂 I added in a little 5-1-1 fish fertilizer to my feeding regimen as well. Still picking off inchworms. And as you can see I made it to the hardware store and put up this baby almost completely by myself. I only asked my husband to hold the center roof panel support while I screwed it in. Couldn't have been better timing since hurricane Dorian came through yesterday and we had plenty of rain. Of course it didn't fully protect them but the majority of the rain hit the roof. And then it got down to 49 F last night. It's really Fall now! The big girl (I'm calling her Gen 2, let's see who puts that together) is starting to get frosty. Rogue One is still a little behind but I'm not worried. All in good time, all in good time...
Likes
8
Share
Body has been horrible to me also been very busy we are insect free how ever nitrogen toxicity is now the problem never used roots organic good soil just not if u like to go heavy in veg I will be trying other soils keep following I will do more ethos in different pots and substrates as well follow guys
Likes
23
Share
Germination Week ~ it all started Sunday 9/26/21! Took the 5 Fastbuds Wedding Cheesecake Autos and placed them in a paper towel added a little bit of water then placed in a sandwich baggy, do not zip it closed, leave open it needs to breath and store in a dark room temp place ! Check once in a while make sure paper towel is still moist let it sit !! 9/28/21 The 5 Wedding Cheesecakes popped and were ready to be moved to permanent home! 3gallon AC Infinity bags for each of mine filled up with Fox Farms Ocean Forest to became their home sweet homes! 😍 Today Friday ~ 10/1/21 All 5 Wedding Cheesecakes have popped up in the soil! 😍 My HLG Scorpion Rspec is set at 51 1/2 inches to the floor at 3 clicks or 30% power , and 200-214 par ! What a great Successful Germination week it’s been , stay tuned for next week for week 1 of veg ! Have a great safe weekend, Peace, love an positive vibes to y’all Cheers
Processing
Likes
25
Share
@HH501
Follow
good evening green and sticky thumb friends. today the child enters the 13th week and probably tomorrow, also for reasons of time and perfumes, with Christmas just around the corner .. I will go to the collection. Certainly I did not expect large quantities, but mine was more an outdoor experiment to see if despite the temperatures this og of my friends of the noborder was resistant to low temperatures (we also arrived at an exposure of 5/8 degrees). I managed to complete it despite the unwelcome visit of some insect and its defoliation.
Likes
20
Share
Hey guys :-) First of all I have to say that all 5 strains I have in the tent from Amsterdam Genetic are beautiful genetics 👍 . This week they were repotted into 8L fabric pots. When repotting, 1.5 g of Green House Powder Feeding Bio line were added per liter of substrate :-) . That's enough until the first flowers start 👍. Watering was done twice this week with 0.4 l each. Otherwise everything was cleaned and checked and fresh osmosis water was mixed. Stay healthy 🙏🏻💚 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://shop.greenhousefeeding.com/us/ 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : https://www.amsterdamgenetics.com/product/lemongrass/ Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.4 MadeInGermany
Likes
3
Share
09/03 - Clone cuttings running strong - Chopped the mother - Pulled approximately 17 viable clones - currently in solo cups rooting - Heavy on the humidity prop 80% - Temps 79 (F)
Likes
13
Share
Esta semana he empezado a regar solo con agua en teoría las plantas son de 55-60 días aproximadamente y el día 19 cumplen 60 días.. aunque los tricomas están 50% blancos y 50% transparentes espero que maduren un poco más durante esta semana por que ya tienen bastantes signos de carencia en las hojas que les quedan por que se le han caído bastantes también
Likes
3
Share
Ahoj.Začíná nám druhý týden květu.Je to prales.Ohýbám zatím listy pod sebe.Ať to roste,přátelé. :)
Likes
Comments
Share
Likes
78
Share
@Nebula420
Follow
I love how Blackberry grow, so vigorously and beautiful plant. Very easy strain, suitable for beginners, you just need to water and give fertilizer, its all u need. Plants look happy and healthy, all is well. Blackberry loves fertilizer so much xD=) always asks more))) Blackberry already flowering,now I can see amazing colors. The smell is weak. It’s hard to describe this amazing smell of berries, so sweet!😍 Thanks Fast Buds, nice genetics, and thank to everyone who follow my grow report, Peace!😘
Processing
Likes
26
Share
De nuevo familia , reconozco que de las 3 variedades , skunk es mi favorita para destacar entre las demás, NO se espigan nada, los internudos están bastante juntos y la cepa 3/3 ejemplares están muy sanas. Cada una con alguna particularidad genética pero muy sanas. Ph bastante controlado, el trasplante lo asimilaron bien todas, humedad en 55% , siguen sin comida pero por poco tiempo, pronto les daremos algo de caña.
Processing
Likes
8
Share
I performed the first top to the plant. I will do a main lining a bit modified by keeping 2 sets instead of just 1. The plant after half a day from being topped started growing as hell!! I will probably transplant it in a few days. And that's what I did by the end of the week. The pot had too big holse compered to the perlite I bought so I had to smallet 'em down with some tape. I also topped the plant again. Wird three-end set came out of the topping but eveything staying on the plant is quite normal
Likes
166
Share
@iMeus
Follow
Hello friends! Here’s the skinny on my grow “First Mainline Attempt!”. I’m going to split this up a bit so it’s easier to follow, this will be a long one :) ~ Progress Day 56 ~ There’s been a lot of growth happening since I got this new light from KINGLED, genuinely surprised. I could notice the difference within hours that my little ones where love’n the light! Compared to last week the difference is huge (to me). I was using a Bestva LED light for my grows up to this point. I read reviews and thought that would be the best light (Bestva) within my current budget. But my plants didn’t seem happy, or growing at an expected rate, I thought I was doing something wrong. Well long story short the KINGLED has made a impact on my plants, I can’t believe all I needed was more light. I will post the light specs below if you’re interested. Now i’m gonna jump right into this weeks growth. I’ll separate each plant below and provide details on height and structure. ~ Individual Progress Notes ~ [CBD Blueberry] Height: 6.0" Tops: 8 Notes: Smallest of the mothers, and she has a weird asymmetrical growth pattern, the nodes don’t match evenly, not sure what mutation this is. It could be that this strain doesn’t like being mainlined.. If this negatively impacts the overall yield and quality I will kill off this mother plant and clones. I have 2 more seeds to germ so it’s not a total loss. [Mazar] Height: 8.0" Tops: 8 Notes: This girl is responding the best to the mainline experiment, I’m excited to clone her off later. Nice symmetrical growth :) [White Widow] Height: 6.1" Tops: 8 Notes: I honestly thought she would be the runt, guess not! Though not the biggest she has the phatest leaves and thickest canopy. I can only wonder what the next few weeks will be like. Must clone! [Super Silver Haze] Height: 7.2" Tops: 8 Notes: Another that’s responding well to the treatment. I’d like to clone her of as well as soon as there is enough growth for me to collect samples. I’ve only had this strain once so I’m hoping this will be as good or better, who knows :) [Purple Urkle #1] Height: 8.0 Tops: 8 Notes: I lost the clone to this girl, I'll need a replacement(s) to test before I flower, more stretch than the others, hmm (both 1 & 2 need to be tested via clones) [Purple Urkle #2] Height: 9.0 Tops: 8 Notes: This girl is very stretchy and her clone is insane! Thickest stalk out of any of my girls? I don't know why but she is phat, love it. Check out my diary "A Few Clones" if you're interested in this possible monster of a plant :) ~ Concerns ~ My only real concern at this point is mite and insect control. This grow is in the garage so that’s not especially easy to avoid. Staying vigilant and nuke’n everything that moves (without harming my plants) is working so far. Those pesky mites and other fan favorite insects! I swear I’ll get my revenge >:( ~ Final Thoughts ~ Other than the local mite population making claims to my property, I’m very satisfied with this weeks progress. Installing the ducting and fans was the hardest chore I had to do, and now that’s taken care of. Before I finish up I want to apologize for not being as detailed and thorough these past few weeks. Now this is a bit personal but I’m willing to share it with ya’ll. My mother has stage 4 cancer, yeah… It hasn’t hit me like a train yet, but I’m still suffering. I’m trying to prepare myself in the event she doesn't make it through chemo and that’s a tough pill to swallow friends. Hopefully I can produce some cbd medicine for her to ease her pain, and help to improve her quality of life. I’m going to close this weeks update by saying thank you to all of you wonderful people, the support and comments make my day, I appreciate em all. Much love, Meus [Light Specs] Brand: KINGLED Series: King Plus Model: 3000 watt Replacement: 2000 watt Avg Power Draw: 615 watt Input Voltage(AC): 85-265 Volts Frequency: 50-60 Hz Lifespan: 50,000 hours Total LEDs: 300 Core Coverage Area at 24": 7.8' x 7.5' PAR at 18": 760 μmol/m2s Lumens: 23454.6 Weight: 15.8 lbs